87 lines
3.9 KiB
C
87 lines
3.9 KiB
C
/*
|
|
* Settings.h
|
|
*
|
|
* Created on: 29 Sep 2016
|
|
* Author: Ralim
|
|
*
|
|
* Houses the system settings and allows saving / restoring from flash
|
|
*/
|
|
|
|
#ifndef SETTINGS_H_
|
|
#define SETTINGS_H_
|
|
#include <stdint.h>
|
|
#define SETTINGSVERSION (0x2A)
|
|
/*Change this if you change the struct below to prevent people getting \
|
|
out of sync*/
|
|
|
|
/*
|
|
* This struct must be a multiple of 2 bytes as it is saved / restored from
|
|
* flash in uint16_t chunks
|
|
*/
|
|
typedef struct {
|
|
uint8_t version; // Used to track if a reset is needed on firmware upgrade
|
|
|
|
uint16_t SolderingTemp; // current set point for the iron
|
|
uint16_t SleepTemp; // temp to drop to in sleep
|
|
uint8_t SleepTime; // minutes timeout to sleep
|
|
uint8_t minDCVoltageCells; // The voltage we cut out at for under voltage when powered by DC jack
|
|
uint8_t minVoltageCells; // Minimum allowed voltage per cell <3S - 3.0V (30)> <4S - 2.4V (24)> <...> (Minimum recommended 2.7V)
|
|
uint8_t QCIdealVoltage; // Desired QC3.0 voltage (9,12,20V)
|
|
uint8_t OrientationMode : 2; // Selects between Auto,Right and left handed layouts
|
|
uint8_t sensitivity : 4; // Sensitivity of accelerometer (5 bits)
|
|
uint8_t animationLoop : 1; // Animation loop switch
|
|
uint8_t animationSpeed : 2; // Animation speed (in miliseconds)
|
|
uint8_t autoStartMode : 2; // Should the unit automatically jump straight
|
|
// into soldering mode when power is applied
|
|
uint8_t ShutdownTime; // Time until unit shuts down if left alone
|
|
|
|
uint8_t coolingTempBlink : 1; // Should the temperature blink on the cool
|
|
// down screen until its <50C
|
|
uint8_t detailedIDLE : 1; // Detailed idle screen
|
|
uint8_t detailedSoldering : 1; // Detailed soldering screens
|
|
uint8_t temperatureInF : 1; // Should the temp be in F or C (true is F)
|
|
uint8_t descriptionScrollSpeed : 1; // Description scroll speed
|
|
uint8_t lockingMode : 2; // Store the locking mode
|
|
uint8_t KeepAwakePulse; // Keep Awake pulse power in 0.1 watts (10 = 1Watt)
|
|
uint8_t KeepAwakePulseWait; // Time between Keep Awake pulses in 2500 ms = 2.5 s increments
|
|
uint8_t KeepAwakePulseDuration; // Duration of the Keep Awake pusle in 250 ms increments
|
|
|
|
uint16_t voltageDiv; // Voltage divisor factor
|
|
uint16_t BoostTemp; // Boost mode set point for the iron
|
|
uint16_t CalibrationOffset; // This stores the temperature offset for this tip
|
|
// in the iron.
|
|
|
|
uint8_t powerLimit; // Maximum power iron allowed to output
|
|
|
|
uint8_t ReverseButtonTempChangeEnabled; // Change the plus and minus button assigment
|
|
uint16_t TempChangeLongStep; // Change the plus and minus button assigment
|
|
uint16_t TempChangeShortStep; // Change the plus and minus button assigment
|
|
uint8_t hallEffectSensitivity; // Operating mode of the hall effect sensor
|
|
uint8_t accelMissingWarningCounter; // Counter of how many times we have warned we cannot detect the accelerometer
|
|
uint8_t pdMissingWarningCounter; // Counter of how many times we have warned we cannot detect the pd interface
|
|
char uiLanguage[8]; // Selected UI Language code, null-terminated *only if* the length is less than 8 chars
|
|
|
|
uint8_t PDNegTimeout; // PD timeout in 100ms steps
|
|
|
|
uint32_t padding; // This is here for in case we are not an even divisor so
|
|
// that nothing gets cut off
|
|
// MUST BE LAST
|
|
|
|
} systemSettingsType;
|
|
typedef enum {
|
|
OFF = 0, // Off (disabled)
|
|
SLOW = 1, //
|
|
MEDIUM = 2, //
|
|
FAST = 3, //
|
|
MAX_VALUE = 4 //
|
|
} settingOffSpeed_t;
|
|
extern volatile systemSettingsType systemSettings;
|
|
|
|
void saveSettings();
|
|
bool restoreSettings();
|
|
uint8_t lookupVoltageLevel();
|
|
uint16_t lookupHallEffectThreshold();
|
|
void resetSettings();
|
|
|
|
#endif /* SETTINGS_H_ */
|