IronOS/Translations/translation_PT.json

{
    "languageCode": "PT",
    "languageLocalName": "Português",
    "tempUnitFahrenheit": true,
    "messagesWarn": {
        "CJCCalibrationDone": {
            "message": "Calibration\ndone!"
        },
        "ResetOKMessage": {
            "message": "Reset OK"
        },
        "SettingsResetMessage": {
            "message": "Certain settings\nwere changed!"
        },
        "NoAccelerometerMessage": {
            "message": "No accelerometer\ndetected!"
        },
        "NoPowerDeliveryMessage": {
            "message": "No USB-PD IC\ndetected!"
        },
        "LockingKeysString": {
            "message": "LOCKED"
        },
        "UnlockingKeysString": {
            "message": "UNLOCKED"
        },
        "WarningKeysLockedString": {
            "message": "!LOCKED!"
        },
        "WarningThermalRunaway": {
            "message": "Thermal\nRunaway"
        },
        "SettingsCalibrationWarning": {
            "message": "Before rebooting, make sure tip & handle are at room temperature!"
        },
        "CJCCalibrating": {
            "message": "calibrating\n"
        },
        "SettingsResetWarning": {
            "message": "Definições de fábrica?"
        },
        "UVLOWarningString": {
            "message": "DC BAIXO"
        },
        "UndervoltageString": {
            "message": "Subtensão"
        },
        "InputVoltageString": {
            "message": "Tensão "
        },
        "SleepingSimpleString": {
            "message": "Zzzz"
        },
        "SleepingAdvancedString": {
            "message": "Repouso..."
        },
        "SleepingTipAdvancedString": {
            "message": "Ponta:"
        },
        "OffString": {
            "message": "Off"
        },
        "DeviceFailedValidationWarning": {
            "message": "Your device is most likely a counterfeit!"
        }
    },
    "characters": {
        "SettingRightChar": "D",
        "SettingLeftChar": "C",
        "SettingAutoChar": "A",
        "SettingOffChar": "O",
        "SettingSlowChar": "S",
        "SettingMediumChar": "M",
        "SettingFastChar": "F",
        "SettingStartNoneChar": "D",
        "SettingStartSolderingChar": "S",
        "SettingStartSleepChar": "H",
        "SettingStartSleepOffChar": "A",
        "SettingLockDisableChar": "D",
        "SettingLockBoostChar": "B",
        "SettingLockFullChar": "F"
    },
    "menuGroups": {
        "PowerMenu": {
            "displayText": "Power\nsettings",
            "description": ""
        },
        "SolderingMenu": {
            "displayText": "Configurações\nSolda",
            "description": ""
        },
        "PowerSavingMenu": {
            "displayText": "Modos\nRepouso",
            "description": ""
        },
        "UIMenu": {
            "displayText": "Interface\nUtilizador",
            "description": ""
        },
        "AdvancedMenu": {
            "displayText": "Menu\nAvançado",
            "description": ""
        }
    },
    "menuOptions": {
        "DCInCutoff": {
            "displayText": "Fonte\nalimentação",
            "description": "Fonte de alimentação. Define a tensão de corte. (DC=10V) (S=3.3V/célula)"
        },
        "MinVolCell": {
            "displayText": "Minimum\nvoltage",
            "description": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
        },
        "QCMaxVoltage": {
            "displayText": "Potência\nFonte",
            "description": "Potência da fonte usada (Watt)"
        },
        "PDNegTimeout": {
            "displayText": "PD\ntimeout",
            "description": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
        },
        "BoostTemperature": {
            "displayText": "Modo turbo\ntemperat.",
            "description": "Ajuste de temperatura do \"modo turbo\""
        },
        "AutoStart": {
            "displayText": "Partida\nautomática",
            "description": "Aquece a ponta automaticamente ao ligar (D=desligar | S=soldagem | H=hibernar | A=hibernar temp. ambiente)"
        },
        "TempChangeShortStep": {
            "displayText": "Temp change\nshort",
            "description": "Temperature-change-increment on short button press"
        },
        "TempChangeLongStep": {
            "displayText": "Temp change\nlong",
            "description": "Temperature-change-increment on long button press"
        },
        "LockingMode": {
            "displayText": "Allow locking\nbuttons",
            "description": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
        },
        "MotionSensitivity": {
            "displayText": "Sensibilidade\nmovimento",
            "description": "Sensibilidade ao movimento (0=Desligado | 1=Menor | ... | 9=Maior)"
        },
        "SleepTemperature": {
            "displayText": "Temperat.\nrepouso",
            "description": "Temperatura de repouso (C)"
        },
        "SleepTimeout": {
            "displayText": "Tempo\nrepouso",
            "description": "Tempo para repouso (Minutos | Segundos)"
        },
        "ShutdownTimeout": {
            "displayText": "Tempo\ndesligam.",
            "description": "Tempo para desligamento (Minutos)"
        },
        "HallEffSensitivity": {
            "displayText": "Hall sensor\nsensitivity",
            "description": "Sensitivity to magnets (0=Desligado | 1=Menor | ... | 9=Maior)"
        },
        "TemperatureUnit": {
            "displayText": "Unidade\ntemperatura",
            "description": "Unidade de temperatura (C=Celsius | F=Fahrenheit)"
        },
        "DisplayRotation": {
            "displayText": "Orientação\ntela",
            "description": "Orientação da tela (D=estro | C=anhoto | A=utomática)"
        },
        "CooldownBlink": {
            "displayText": "Piscar ao\narrefecer",
            "description": "Faz o valor da temperatura piscar durante o arrefecimento"
        },
        "ScrollingSpeed": {
            "displayText": "Velocidade\ntexto ajuda",
            "description": "Velocidade a que o texto é exibido"
        },
        "ReverseButtonTempChange": {
            "displayText": "Swap\n+ - keys",
            "description": "Reverse assignment of buttons for temperature adjustment"
        },
        "AnimSpeed": {
            "displayText": "Anim.\nspeed",
            "description": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
        },
        "AnimLoop": {
            "displayText": "Anim.\nloop",
            "description": "Loop icon animations in main menu"
        },
        "Brightness": {
            "displayText": "Screen\nbrightness",
            "description": "Adjust the OLED screen brightness"
        },
        "ColourInversion": {
            "displayText": "Invert\nscreen",
            "description": "Invert the OLED screen colors"
        },
        "LOGOTime": {
            "displayText": "Boot logo\nduration",
            "description": "Set boot logo duration (s=seconds)"
        },
        "AdvancedIdle": {
            "displayText": "Tela repouso\navançada",
            "description": "Exibe informações avançadas quando em espera"
        },
        "AdvancedSoldering": {
            "displayText": "Tela trabalho\navançada",
            "description": "Exibe informações avançadas durante o uso"
        },
        "PowerLimit": {
            "displayText": "Power\nlimit",
            "description": "Maximum power the iron can use (W=watt)"
        },
        "CalibrateCJC": {
            "displayText": "Calibrate CJC\nat next boot",
            "description": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
        },
        "VoltageCalibration": {
            "displayText": "Calibrar\ntensão",
            "description": "Calibra a tensão de alimentação. Use os botões para ajustar o valor. Mantenha pressionado para sair"
        },
        "PowerPulsePower": {
            "displayText": "Power\npulse",
            "description": "Intensity of power of keep-awake-pulse (W=watt)"
        },
        "PowerPulseWait": {
            "displayText": "Power pulse\ndelay",
            "description": "Delay before keep-awake-pulse is triggered (x 2.5s)"
        },
        "PowerPulseDuration": {
            "displayText": "Power pulse\nduration",
            "description": "Keep-awake-pulse duration (x 250ms)"
        },
        "SettingsReset": {
            "displayText": "Reset de\nfábrica?",
            "description": "Reverte todos ajustes"
        },
        "LanguageSwitch": {
            "displayText": "Idioma:\n PT   Português",
            "description": ""
        },
        "BLEEnabled": {
            "displayText": "BLE\n Enabled",
            "description": ""
        }
    }
}