7d0af3fc4c
* Estimated pinout into the ioc file * Fix Atollic paths to be somewhat more portable * Add make command * Add rough calls to ADC2 [untested] * Using dual ADC injected modes * Start both ADCs * Move some IRQ's to ram exec * Stabilize PID a bit more * Add in ideas for tip type selection * Update peripheral setup to support TS80 * Add tiptype formula / settings struct * Add function ids to the settings menu * Rough tip selection * Rough out new cal routine for simple tips * Hardware test is fairly close for first pass * Add Simple calibration case [UNTESTED] This adds the calibration option that uses boiling water to the calibration menu. This is untested, and may need gain adjustments before use. * [Feat] Add some QC testing code * Typo fix * Add double button press handler for different rising times * Add hook for jump to sleep mode * QC for 9V Works! * Rough out QC handler, trim out old menu help text thats useless * QC 9V working... Static all the things (Low on ROM)! * Static all I2C to save space * Move QC negotiation into background task so it doesnt block the UI * Input V display works, tune ADC * QC 3 steps working * Start tip R measurements * Impliment tip resistance * Fix up the accel position, link in auto QC stages * Fix tip title * Tip type settings, Static OLED * Revert I2C callbacks * Misc Cleanup * Better Gain value, need to investiate offset * Add model warning * Add TS80 Boot Logo (#367) * Add TS80 Boot Logo * Refined * Moved down by 1px * Add in power selection 18/24W * Clean up accelerometer, fix TS100 builds, Fix voltage div cal
63 lines
2.5 KiB
C
63 lines
2.5 KiB
C
/*
|
|
* Settings.h
|
|
*
|
|
* Created on: 29 Sep 2016
|
|
* Author: Ralim
|
|
*
|
|
* Houses the system settings and allows saving / restoring from flash
|
|
*/
|
|
|
|
#ifndef SETTINGS_H_
|
|
#define SETTINGS_H_
|
|
#include <stdint.h>
|
|
#include "stm32f1xx_hal.h"
|
|
#define SETTINGSVERSION \
|
|
0x16 /*Change this if you change the struct below to prevent people getting \
|
|
out of sync*/
|
|
|
|
/*
|
|
* This struct must be a multiple of 2 bytes as it is saved / restored from
|
|
* flash in uint16_t chunks
|
|
*/
|
|
typedef struct {
|
|
uint16_t SolderingTemp; // current set point for the iron
|
|
uint16_t SleepTemp; // temp to drop to in sleep
|
|
uint8_t SleepTime; // minutes timeout to sleep
|
|
uint8_t cutoutSetting; // The voltage we cut out at for under voltage OR Power level for TS80
|
|
uint8_t OrientationMode :2; // If true we want to invert the display for lefties
|
|
uint8_t sensitivity :4; // Sensitivity of accelerometer (5 bits)
|
|
uint8_t autoStartMode :2; // Should the unit automatically jump straight
|
|
// into soldering mode when power is applied
|
|
uint8_t ShutdownTime; // Time until unit shuts down if left alone
|
|
uint8_t boostModeEnabled :1; // Boost mode swaps BUT_A in soldering mode to
|
|
// temporary soldering temp over-ride
|
|
uint8_t coolingTempBlink :1; // Should the temperature blink on the cool
|
|
// down screen until its <50C
|
|
uint8_t detailedIDLE :1; // Detailed idle screen
|
|
uint8_t detailedSoldering :1; // Detailed soldering screens
|
|
uint8_t temperatureInF; // Should the temp be in F or C (true is F)
|
|
uint8_t descriptionScrollSpeed :1; // Description scroll speed
|
|
uint16_t voltageDiv; // Voltage divisor factor
|
|
uint16_t BoostTemp; // Boost mode set point for the iron
|
|
int16_t CalibrationOffset; // This stores the temperature offset for this tip
|
|
// in the iron.
|
|
uint8_t PID_P; // PID P Term
|
|
uint8_t PID_I; // PID I Term
|
|
uint8_t PID_D; // PID D Term
|
|
uint8_t version; // Used to track if a reset is needed on firmware upgrade
|
|
uint8_t customTipGain; // Tip gain value if custom tuned, or 0 if using a
|
|
// tipType param
|
|
uint8_t tipType;
|
|
uint32_t padding; // This is here for in case we are not an even divisor so
|
|
// that nothing gets cut off
|
|
} systemSettingsType;
|
|
|
|
extern volatile systemSettingsType systemSettings;
|
|
|
|
void saveSettings();
|
|
void restoreSettings();
|
|
uint8_t lookupVoltageLevel(uint8_t level);
|
|
void resetSettings();
|
|
bool showBootLogoIfavailable();
|
|
#endif /* SETTINGS_H_ */
|