IronOS/Translations/translation_DA.json

{
	"languageCode": "DA",
	"languageLocalName": "Dansk",
	"fonts": [
		"ascii_basic",
		"latin_extended"
	],
	"tempUnitFahrenheit": false,
	"messages": {
		"SettingsCalibrationWarning": "Sørg for at loddespidsen er ved stuetemperatur, inden du fortsætter!",
		"SettingsResetWarning": "Are you sure to reset settings to default values?",
		"UVLOWarningString": "Lav Volt",
		"UndervoltageString": "Undervoltage",
		"InputVoltageString": "Input V: ",
		"SleepingSimpleString": "Zzzz",
		"SleepingAdvancedString": "Dvale...",
		"SleepingTipAdvancedString": "Tip:",
		"OffString": "Off",
		"DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"
	},
	"messagesWarn": {
		"ResetOKMessage": "Reset OK",
		"SettingsResetMessage": [
			"Certain settings",
			"were changed!"
		],
		"NoAccelerometerMessage": [
			"No accelerometer",
			"detected!"
		],
		"NoPowerDeliveryMessage": [
			"No USB-PD IC",
			"detected!"
		],
		"LockingKeysString": "LOCKED",
		"UnlockingKeysString": "UNLOCKED",
		"WarningKeysLockedString": "!LOCKED!",
		"WarningThermalRunaway": [
			"Thermal",
			"Runaway"
		]
	},
	"characters": {
		"SettingRightChar": "H",
		"SettingLeftChar": "V",
		"SettingAutoChar": "A",
		"SettingOffChar": "O",
		"SettingSlowChar": "S",
		"SettingMediumChar": "M",
		"SettingFastChar": "F",
		"SettingStartNoneChar": "S",
		"SettingStartSolderingChar": "L",
		"SettingStartSleepChar": "D",
		"SettingStartSleepOffChar": "R",
		"SettingSensitivityOff": "O",
		"SettingSensitivityLow": "L",
		"SettingSensitivityMedium": "M",
		"SettingSensitivityHigh": "H",
		"SettingLockDisableChar": "D",
		"SettingLockBoostChar": "B",
		"SettingLockFullChar": "F"
	},
	"menuGroups": {
		"PowerMenu": {
			"text2": [
				"Power",
				"settings"
			],
			"desc": "Power settings"
		},
		"SolderingMenu": {
			"text2": [
				"Soldering",
				"settings"
			],
			"desc": "Soldering settings"
		},
		"PowerSavingMenu": {
			"text2": [
				"Sleep",
				"mode"
			],
			"desc": "Power saving settings"
		},
		"UIMenu": {
			"text2": [
				"User",
				"interface"
			],
			"desc": "User interface settings"
		},
		"AdvancedMenu": {
			"text2": [
				"Advanced",
				"settings"
			],
			"desc": "Advanced settings"
		}
	},
	"menuOptions": {
		"DCInCutoff": {
			"text2": [
				"Power",
				"source"
			],
			"desc": "Strømforsyning. Indstil Cutoff Spændingen. (DC 10V) (S 3,3V per cell)"
		},
		"SleepTemperature": {
			"text2": [
				"Sleep",
				"temp"
			],
			"desc": "Dvale Temperatur (C)"
		},
		"SleepTimeout": {
			"text2": [
				"Sleep",
				"timeout"
			],
			"desc": "Dvale Timeout (Minutter | Sekunder)"
		},
		"ShutdownTimeout": {
			"text2": [
				"Shutdown",
				"timeout"
			],
			"desc": "sluknings Timeout (Minutter)"
		},
		"MotionSensitivity": {
			"text2": [
				"Motion",
				"sensitivity"
			],
			"desc": "Bevægelsesfølsomhed (0=Slukket | 1=Mindst følsom | ... | 9=Mest følsom)"
		},
		"TemperatureUnit": {
			"text2": [
				"Temperature",
				"unit"
			],
			"desc": "Temperatur Enhed (C=Celsius | F=Fahrenheit)"
		},
		"AdvancedIdle": {
			"text2": [
				"Detailed",
				"idle screen"
			],
			"desc": "Vis detialieret information med en mindre skriftstørrelse på standby skærmen."
		},
		"DisplayRotation": {
			"text2": [
				"Display",
				"orientation"
			],
			"desc": "Skærm Orientering (H=Højre Håndet | V=Venstre Håndet | A=Automatisk)"
		},
		"BoostTemperature": {
			"text2": [
				"Boost",
				"temp"
			],
			"desc": "Temperatur i \"boost\" mode"
		},
		"AutoStart": {
			"text2": [
				"Start-up",
				"behavior"
			],
			"desc": "Start automatisk med lodning når strøm sættes til. (S=Slukket | L=Lodning | D=Dvale tilstand | R=Dvale tilstand rumtemperatur)"
		},
		"CooldownBlink": {
			"text2": [
				"Cooldown",
				"flashing"
			],
			"desc": "Blink temperaturen på skærmen, mens spidsen stadig er varm."
		},
		"CalibrateCJC": {
			"text2": [
				"Calibrate",
				"temperature?"
			],
			"desc": "kalibrere spids temperatur."
		},
		"SettingsReset": {
			"text2": [
				"Restore factory",
				"settings?"
			],
			"desc": "Gendan alle indstillinger"
		},
		"VoltageCalibration": {
			"text2": [
				"Calibrate",
				"input voltage?"
			],
			"desc": "VIN kalibrering. Knapperne justere, Lang tryk for at gå ud"
		},
		"AdvancedSoldering": {
			"text2": [
				"Detailed",
				"solder screen"
			],
			"desc": "Vis detialieret information mens der loddes"
		},
		"ScrollingSpeed": {
			"text2": [
				"Scrolling",
				"speed"
			],
			"desc": "Speed info text scrolls past at (S=slow | F=fast)"
		},
		"QCMaxVoltage": {
			"text2": [
				"QC",
				"voltage"
			],
			"desc": "Max QC voltage the iron should negotiate for"
		},
		"PDNegTimeout": {
			"text2": [
				"PD",
				"timeout"
			],
			"desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
		},
		"PowerLimit": {
			"text2": [
				"Power",
				"limit"
			],
			"desc": "Maximum power the iron can use (W=watt)"
		},
		"ReverseButtonTempChange": {
			"text2": [
				"Swap",
				"+ - keys"
			],
			"desc": "Reverse assignment of buttons for temperature adjustment"
		},
		"TempChangeShortStep": {
			"text2": [
				"Temp change",
				"short"
			],
			"desc": "Temperature-change-increment on short button press"
		},
		"TempChangeLongStep": {
			"text2": [
				"Temp change",
				"long"
			],
			"desc": "Temperature-change-increment on long button press"
		},
		"PowerPulsePower": {
			"text2": [
				"Power",
				"pulse"
			],
			"desc": "Intensity of power of keep-awake-pulse (watt)"
		},
		"HallEffSensitivity": {
			"text2": [
				"Hall sensor",
				"sensitivity"
			],
			"desc": "Sensitivity of the Hall effect sensor to detect sleep (0=Slukket | 1=Mindst følsom | ... | 9=Mest følsom)"
		},
		"LockingMode": {
			"text2": [
				"Allow locking",
				"buttons"
			],
			"desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
		},
		"MinVolCell": {
			"text2": [
				"Minimum",
				"voltage"
			],
			"desc": "Minimum allowed voltage per cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
		},
		"AnimLoop": {
			"text2": [
				"Anim.",
				"loop"
			],
			"desc": "Loop icon animations in main menu"
		},
		"AnimSpeed": {
			"text2": [
				"Anim.",
				"speed"
			],
			"desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
		},
		"PowerPulseWait": {
			"text2": [
				"Power pulse",
				"delay"
			],
			"desc": "Delay before keep-awake-pulse is triggered (x 2,5s)"
		},
		"PowerPulseDuration": {
			"text2": [
				"Power pulse",
				"duration"
			],
			"desc": "Keep-awake-pulse duration (x 250ms)"
		},
		"LanguageSwitch": {
			"text2": [
				"Sprog :",
				" DA     Dansk"
			],
			"desc": ""
		},
		"Brightness": {
			"text2": [
				"Screen",
				"brightness"
			],
			"desc": "Adjust the brightness of the OLED screen"
		},
		"ColourInversion": {
			"text2": [
				"Invert",
				"screen"
			],
			"desc": "Invert the colours of the OLED screen"
		},
		"LOGOTime": {
			"text2": [
				"Boot logo",
				"duration"
			],
			"desc": "Sets the duration for the boot logo (s=seconds)"
		}
	}
}