293 lines
9.5 KiB
C++
293 lines
9.5 KiB
C++
/*
|
|
* GUIThread.cpp
|
|
*
|
|
* Created on: 19 Aug 2019
|
|
* Author: ralim
|
|
*/
|
|
extern "C" {
|
|
#include "FreeRTOSConfig.h"
|
|
}
|
|
#include "BootLogo.h"
|
|
#include "Buttons.hpp"
|
|
#include "I2CBB.hpp"
|
|
#include "LIS2DH12.hpp"
|
|
#include "MMA8652FC.hpp"
|
|
#include "OLED.hpp"
|
|
#include "OperatingModeUtilities.h"
|
|
#include "OperatingModes.h"
|
|
#include "Settings.h"
|
|
#include "TipThermoModel.h"
|
|
#include "Translation.h"
|
|
#include "cmsis_os.h"
|
|
#include "configuration.h"
|
|
#include "history.hpp"
|
|
#include "main.hpp"
|
|
#include "power.hpp"
|
|
#include "settingsGUI.hpp"
|
|
#include "stdlib.h"
|
|
#include "string.h"
|
|
#if POW_PD
|
|
#include "USBPD.h"
|
|
#include "pd.h"
|
|
#endif
|
|
// File local variables
|
|
|
|
extern bool heaterThermalRunaway;
|
|
|
|
#define MOVEMENT_INACTIVITY_TIME (60 * configTICK_RATE_HZ)
|
|
#define BUTTON_INACTIVITY_TIME (60 * configTICK_RATE_HZ)
|
|
|
|
uint8_t buttonAF[sizeof(buttonA)];
|
|
uint8_t buttonBF[sizeof(buttonB)];
|
|
uint8_t disconnectedTipF[sizeof(disconnectedTip)];
|
|
/* StartGUITask function */
|
|
void startGUITask(void const *argument) {
|
|
(void)argument;
|
|
prepareTranslations();
|
|
|
|
OLED::initialize(); // start up the LCD
|
|
OLED::setBrightness(getSettingValue(SettingsOptions::OLEDBrightness));
|
|
OLED::setInverseDisplay(getSettingValue(SettingsOptions::OLEDInversion));
|
|
|
|
uint8_t tempWarningState = 0;
|
|
bool buttonLockout = false;
|
|
bool tempOnDisplay = false;
|
|
bool tipDisconnectedDisplay = false;
|
|
bool showExitMenuTransition = false;
|
|
|
|
{
|
|
// Generate the flipped screen into ram for later use
|
|
// flipped is generated by flipping each row
|
|
for (int row = 0; row < 2; row++) {
|
|
for (int x = 0; x < 42; x++) {
|
|
buttonAF[(row * 42) + x] = buttonA[(row * 42) + (41 - x)];
|
|
buttonBF[(row * 42) + x] = buttonB[(row * 42) + (41 - x)];
|
|
disconnectedTipF[(row * 42) + x] = disconnectedTip[(row * 42) + (41 - x)];
|
|
}
|
|
}
|
|
}
|
|
|
|
getTipRawTemp(1); // reset filter
|
|
|
|
OLED::setRotation(getSettingValue(SettingsOptions::OrientationMode) & 1);
|
|
// If the front button is held down, on supported devices, show PD debugging metrics
|
|
#if POW_PD
|
|
#ifdef HAS_POWER_DEBUG_MENU
|
|
if (getButtonA()) {
|
|
showPDDebug();
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
if (getSettingValue(SettingsOptions::CalibrateCJC) > 0) {
|
|
performCJCC();
|
|
}
|
|
|
|
// If the boot logo is enabled (but it times out) and the autostart mode is enabled (but not set to sleep w/o heat), start heating during boot logo
|
|
if (getSettingValue(SettingsOptions::LOGOTime) > 0 && getSettingValue(SettingsOptions::LOGOTime) < 5 && getSettingValue(SettingsOptions::AutoStartMode) > 0
|
|
&& getSettingValue(SettingsOptions::AutoStartMode) < 3) {
|
|
uint16_t sleepTempDegC;
|
|
if (getSettingValue(SettingsOptions::TemperatureInF)) {
|
|
sleepTempDegC = TipThermoModel::convertFtoC(getSettingValue(SettingsOptions::SleepTemp));
|
|
} else {
|
|
sleepTempDegC = getSettingValue(SettingsOptions::SleepTemp);
|
|
}
|
|
// Only heat to sleep temperature (but no higher than 75°C for safety)
|
|
currentTempTargetDegC = min(sleepTempDegC, 75);
|
|
}
|
|
|
|
BootLogo::handleShowingLogo((uint8_t *)FLASH_LOGOADDR);
|
|
|
|
showWarnings();
|
|
if (getSettingValue(SettingsOptions::AutoStartMode)) {
|
|
// jump directly to the autostart mode
|
|
gui_solderingMode(getSettingValue(SettingsOptions::AutoStartMode) - 1);
|
|
buttonLockout = true;
|
|
}
|
|
|
|
for (;;) {
|
|
ButtonState buttons = getButtonState();
|
|
if (buttons != BUTTON_NONE) {
|
|
OLED::setDisplayState(OLED::DisplayState::ON);
|
|
}
|
|
if (tempWarningState == 2)
|
|
buttons = BUTTON_F_SHORT;
|
|
if (buttons != BUTTON_NONE && buttonLockout)
|
|
buttons = BUTTON_NONE;
|
|
else
|
|
buttonLockout = false;
|
|
|
|
switch (buttons) {
|
|
case BUTTON_NONE:
|
|
// Do nothing
|
|
break;
|
|
case BUTTON_BOTH:
|
|
// Not used yet
|
|
// In multi-language this might be used to reset language on a long hold
|
|
// or some such
|
|
break;
|
|
|
|
case BUTTON_B_LONG:
|
|
// Show the version information
|
|
showDebugMenu();
|
|
break;
|
|
case BUTTON_F_LONG:
|
|
gui_solderingTempAdjust();
|
|
saveSettings();
|
|
break;
|
|
case BUTTON_F_SHORT:
|
|
if (!isTipDisconnected()) {
|
|
gui_solderingMode(0); // enter soldering mode
|
|
buttonLockout = true;
|
|
}
|
|
break;
|
|
case BUTTON_B_SHORT:
|
|
enterSettingsMenu(); // enter the settings menu
|
|
{
|
|
OLED::useSecondaryFramebuffer(true);
|
|
showExitMenuTransition = true;
|
|
}
|
|
buttonLockout = true;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
currentTempTargetDegC = 0; // ensure tip is off
|
|
getInputVoltageX10(getSettingValue(SettingsOptions::VoltageDiv), 0);
|
|
uint32_t tipTemp = TipThermoModel::getTipInC();
|
|
if (tipTemp > 55) {
|
|
setStatusLED(LED_COOLING_STILL_HOT);
|
|
} else {
|
|
setStatusLED(LED_STANDBY);
|
|
}
|
|
// Preemptively turn the display on. Turn it off if and only if
|
|
// the tip temperature is below 50 degrees C *and* motion sleep
|
|
// detection is enabled *and* there has been no activity (movement or
|
|
// button presses) in a while.
|
|
// This is zero cost really as state is only changed on display updates
|
|
OLED::setDisplayState(OLED::DisplayState::ON);
|
|
|
|
if ((tipTemp < 50) && getSettingValue(SettingsOptions::Sensitivity)
|
|
&& (((xTaskGetTickCount() - lastMovementTime) > MOVEMENT_INACTIVITY_TIME) && ((xTaskGetTickCount() - lastButtonTime) > BUTTON_INACTIVITY_TIME))) {
|
|
OLED::setDisplayState(OLED::DisplayState::OFF);
|
|
setStatusLED(LED_OFF);
|
|
} else {
|
|
OLED::setDisplayState(OLED::DisplayState::ON);
|
|
}
|
|
// Clear the lcd buffer
|
|
OLED::clearScreen();
|
|
if (OLED::getRotation()) {
|
|
OLED::setCursor(50, 0);
|
|
} else {
|
|
OLED::setCursor(-1, 0);
|
|
}
|
|
if (getSettingValue(SettingsOptions::DetailedIDLE)) {
|
|
if (isTipDisconnected()) {
|
|
if (OLED::getRotation()) {
|
|
// in right handed mode we want to draw over the first part
|
|
OLED::drawArea(54, 0, 42, 16, disconnectedTipF);
|
|
} else {
|
|
OLED::drawArea(0, 0, 42, 16, disconnectedTip);
|
|
}
|
|
if (OLED::getRotation()) {
|
|
OLED::setCursor(-1, 0);
|
|
} else {
|
|
OLED::setCursor(42, 0);
|
|
}
|
|
uint32_t Vlt = getInputVoltageX10(getSettingValue(SettingsOptions::VoltageDiv), 0);
|
|
OLED::printNumber(Vlt / 10, 2, FontStyle::LARGE);
|
|
OLED::print(SymbolDot, FontStyle::LARGE);
|
|
OLED::printNumber(Vlt % 10, 1, FontStyle::LARGE);
|
|
if (OLED::getRotation()) {
|
|
OLED::setCursor(48, 8);
|
|
} else {
|
|
OLED::setCursor(91, 8);
|
|
}
|
|
OLED::print(SymbolVolts, FontStyle::SMALL);
|
|
} else {
|
|
if (!(getSettingValue(SettingsOptions::CoolingTempBlink) && (tipTemp > 55) && (xTaskGetTickCount() % 1000 < 300)))
|
|
// Blink temp if setting enable and temp < 55°
|
|
// 1000 tick/sec
|
|
// OFF 300ms ON 700ms
|
|
gui_drawTipTemp(true, FontStyle::LARGE); // draw in the temp
|
|
if (OLED::getRotation()) {
|
|
OLED::setCursor(6, 0);
|
|
} else {
|
|
OLED::setCursor(73, 0); // top right
|
|
}
|
|
OLED::printNumber(getSettingValue(SettingsOptions::SolderingTemp), 3, FontStyle::SMALL); // draw set temp
|
|
if (getSettingValue(SettingsOptions::TemperatureInF))
|
|
OLED::print(SymbolDegF, FontStyle::SMALL);
|
|
else
|
|
OLED::print(SymbolDegC, FontStyle::SMALL);
|
|
if (OLED::getRotation()) {
|
|
OLED::setCursor(0, 8);
|
|
} else {
|
|
OLED::setCursor(67, 8); // bottom right
|
|
}
|
|
printVoltage(); // draw voltage then symbol (v)
|
|
OLED::print(SymbolVolts, FontStyle::SMALL);
|
|
}
|
|
|
|
} else {
|
|
if (OLED::getRotation()) {
|
|
OLED::drawArea(54, 0, 42, 16, buttonAF);
|
|
OLED::drawArea(12, 0, 42, 16, buttonBF);
|
|
OLED::setCursor(0, 0);
|
|
gui_drawBatteryIcon();
|
|
} else {
|
|
OLED::drawArea(0, 0, 42, 16, buttonA); // Needs to be flipped so button ends up
|
|
OLED::drawArea(42, 0, 42, 16, buttonB); // on right side of screen
|
|
OLED::setCursor(84, 0);
|
|
gui_drawBatteryIcon();
|
|
}
|
|
tipDisconnectedDisplay = false;
|
|
if (tipTemp > 55)
|
|
tempOnDisplay = true;
|
|
else if (tipTemp < 45)
|
|
tempOnDisplay = false;
|
|
if (isTipDisconnected()) {
|
|
tempOnDisplay = false;
|
|
tipDisconnectedDisplay = true;
|
|
}
|
|
if (tempOnDisplay || tipDisconnectedDisplay) {
|
|
// draw temp over the start soldering button
|
|
// Location changes on screen rotation
|
|
if (OLED::getRotation()) {
|
|
// in right handed mode we want to draw over the first part
|
|
OLED::fillArea(55, 0, 41, 16, 0); // clear the area for the temp
|
|
OLED::setCursor(56, 0);
|
|
} else {
|
|
OLED::fillArea(0, 0, 41, 16, 0); // clear the area
|
|
OLED::setCursor(0, 0);
|
|
}
|
|
// If we have a tip connected draw the temp, if not we leave it blank
|
|
if (!tipDisconnectedDisplay) {
|
|
// draw in the temp
|
|
if (!(getSettingValue(SettingsOptions::CoolingTempBlink) && (xTaskGetTickCount() % 260 < 160)))
|
|
gui_drawTipTemp(false, FontStyle::LARGE); // draw in the temp
|
|
} else {
|
|
// Draw in missing tip symbol
|
|
|
|
if (OLED::getRotation()) {
|
|
// in right handed mode we want to draw over the first part
|
|
OLED::drawArea(54, 0, 42, 16, disconnectedTipF);
|
|
} else {
|
|
OLED::drawArea(0, 0, 42, 16, disconnectedTip);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if (showExitMenuTransition) {
|
|
OLED::useSecondaryFramebuffer(false);
|
|
OLED::transitionSecondaryFramebuffer(false);
|
|
showExitMenuTransition = false;
|
|
} else {
|
|
OLED::refresh();
|
|
GUIDelay();
|
|
}
|
|
}
|
|
}
|