1f6a3ad167
* Creating uart debug handler * Simpler get raw uV tip * Update Setup.cpp * Debug out working. Moved Logo Need to update docs around logos before merging this in * Add in current pwm level + fix signed int * Update moving logo page for pinecil by 64k * Update TipThermoModel.h
81 lines
2.6 KiB
C
81 lines
2.6 KiB
C
#include "BSP_Flash.h"
|
|
#include "BSP_Power.h"
|
|
#include "BSP_QC.h"
|
|
#include "Defines.h"
|
|
#include "Model_Config.h"
|
|
#include <stdbool.h>
|
|
#include <stdint.h>
|
|
/*
|
|
* BSP.h -- Board Support
|
|
*
|
|
* This exposes functions that are expected to be implemented to add support for different hardware
|
|
*/
|
|
|
|
#ifndef BSP_BSP_H_
|
|
#define BSP_BSP_H_
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
// maximum htim2 PWM value
|
|
extern const uint16_t powerPWM;
|
|
// htim2.Init.Period, the full PWM cycle
|
|
extern uint16_t totalPWM;
|
|
|
|
// Called first thing in main() to init the hardware
|
|
void preRToSInit();
|
|
// Called once the RToS has started for any extra work
|
|
void postRToSInit();
|
|
|
|
// Called once from preRToSInit()
|
|
void BSPInit(void);
|
|
|
|
// Called to reset the hardware watchdog unit
|
|
void resetWatchdog();
|
|
// Accepts a output level of 0.. to use to control the tip output PWM
|
|
void setTipPWM(uint8_t pulse);
|
|
// Returns the Handle temp in C, X10
|
|
uint16_t getHandleTemperature();
|
|
// Returns the Tip temperature ADC reading in raw units
|
|
uint16_t getTipRawTemp(uint8_t refresh);
|
|
// Returns the main DC input voltage, using the adjustable divisor + sample flag
|
|
uint16_t getInputVoltageX10(uint16_t divisor, uint8_t sample);
|
|
// Switch to the most suitable PWM freq given the desired period;
|
|
// returns true if the switch was performed and totalPWM changed
|
|
bool tryBetterPWM(uint8_t pwm);
|
|
|
|
// Readers for the two buttons
|
|
// !! Returns 1 if held down, 0 if released
|
|
uint8_t getButtonA();
|
|
uint8_t getButtonB();
|
|
|
|
// This is a work around that will be called if I2C starts to bug out
|
|
// This should toggle the SCL line until SDA goes high to end the current transaction
|
|
void unstick_I2C();
|
|
|
|
// Reboot the IC when things go seriously wrong
|
|
void reboot();
|
|
|
|
// If the user has programmed in a bootup logo, draw it to the screen from flash
|
|
// Returns 1 if the logo was printed so that the unit waits for the timeout or button
|
|
uint8_t showBootLogoIfavailable();
|
|
// delay wrapper for delay using the hardware timer (used before RTOS)
|
|
void delay_ms(uint16_t count);
|
|
// Used to allow knowledge of if usb_pd is being used
|
|
uint8_t usb_pd_detect();
|
|
bool getHallSensorFitted();
|
|
// If the iron has a hall effect sensor in the handle, return an signed count of the reading
|
|
// If the sensor is single polarity (or polarity insensitive) just return 0..32768
|
|
int16_t getRawHallEffect();
|
|
|
|
// Returns true if power is from dumb "DC" input rather than "smart" QC or PD
|
|
bool getIsPoweredByDCIN();
|
|
|
|
// Logs the system state to a debug interface if supported
|
|
void log_system_state(int32_t PWMWattsx10);
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
#endif /* BSP_BSP_H_ */
|