3594604efc
* Remove unused includes * Adding in submodule * Move fusb functions to the BSP * Remove old code * Creating IronOS PD integration wrapper * Redirect to wrapper * pd lib updates * fix Docker build * Finish linking across * Cleanup * Update Makefile * Update push.yml * Update push.yml * PD -> Compensate for different tick rates * Update codeql-analysis.yml * Fix PD #define for @Firebie * Check irq low at start * Update BSP.h * Update main.cpp * Closer delay * Update OLED.cpp * Bugfix trying to start QC too early * Missing fusb shouldnt hang qc * Update FreeRTOSConfig.h * Update the GD drivers * Update Pinecil IRQ setup * Redirect printf() to uart * Update Power.cpp * Adding extras to PD state * Update USBPD.cpp * Delay in printf * Iterate once before delay on start * Update usb-pd * master usb-pd now * Format gd libs * Update gd32vf103_bkp.c * Guard with PD timeout * Remove CodeQL * Slow for testing, fix runt pulses at start * Fix runt pulse in read size 1 * Cleaner probing setup * Testing delay during stop gen in read 1 * Update I2C driver * Update gd32vf103_i2c.c * Cleaning up i2c wrapper a little, given up on dma for rx * Update preRTOS.cpp * Update Setup.cpp * Update MOVThread.cpp * Slow down UART to work with new clock config * Better ack setup for 2 byte read * Cleanup POW_PD so cant be lost in #includes * tipResistance -> TIP_RESISTANCE * handle NOP race on len==2 * Update configuration.h * Dont use neg timeout to mask anymore * Not required for MHP * Fix up source display Miniware * Fix race on PD init * Update POWThread.cpp * Update formatting * MHP format * Update push.yml * Faster TS80P I2C * Bugfix for IRQ handlers * Correctly handle I2C race on PD access * Fix CI error (unused var) and MHP IRQ * Test Pinecil alt ADC mode
23 lines
873 B
C++
23 lines
873 B
C++
#include "configuration.h"
|
|
#if POW_PD
|
|
#include "BSP.h"
|
|
#include "I2C_Wrapper.hpp"
|
|
#include "Pins.h"
|
|
#include "Setup.h"
|
|
#include "USBPD.h"
|
|
bool fusb_read_buf(const uint8_t deviceAddr, const uint8_t registerAdd, const uint8_t size, uint8_t *buf) { return FRToSI2C::Mem_Read(deviceAddr, registerAdd, buf, size); }
|
|
|
|
bool fusb_write_buf(const uint8_t deviceAddr, const uint8_t registerAdd, const uint8_t size, uint8_t *buf) { return FRToSI2C::Mem_Write(deviceAddr, registerAdd, (uint8_t *)buf, size); }
|
|
|
|
void setupFUSBIRQ() {
|
|
GPIO_InitTypeDef GPIO_InitStruct;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
|
GPIO_InitStruct.Pin = INT_PD_Pin;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
|
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
HAL_GPIO_Init(INT_PD_GPIO_Port, &GPIO_InitStruct);
|
|
HAL_NVIC_SetPriority(EXTI9_5_IRQn, 10, 0);
|
|
HAL_NVIC_EnableIRQ(EXTI9_5_IRQn);
|
|
}
|
|
#endif
|