3594604efc
* Remove unused includes * Adding in submodule * Move fusb functions to the BSP * Remove old code * Creating IronOS PD integration wrapper * Redirect to wrapper * pd lib updates * fix Docker build * Finish linking across * Cleanup * Update Makefile * Update push.yml * Update push.yml * PD -> Compensate for different tick rates * Update codeql-analysis.yml * Fix PD #define for @Firebie * Check irq low at start * Update BSP.h * Update main.cpp * Closer delay * Update OLED.cpp * Bugfix trying to start QC too early * Missing fusb shouldnt hang qc * Update FreeRTOSConfig.h * Update the GD drivers * Update Pinecil IRQ setup * Redirect printf() to uart * Update Power.cpp * Adding extras to PD state * Update USBPD.cpp * Delay in printf * Iterate once before delay on start * Update usb-pd * master usb-pd now * Format gd libs * Update gd32vf103_bkp.c * Guard with PD timeout * Remove CodeQL * Slow for testing, fix runt pulses at start * Fix runt pulse in read size 1 * Cleaner probing setup * Testing delay during stop gen in read 1 * Update I2C driver * Update gd32vf103_i2c.c * Cleaning up i2c wrapper a little, given up on dma for rx * Update preRTOS.cpp * Update Setup.cpp * Update MOVThread.cpp * Slow down UART to work with new clock config * Better ack setup for 2 byte read * Cleanup POW_PD so cant be lost in #includes * tipResistance -> TIP_RESISTANCE * handle NOP race on len==2 * Update configuration.h * Dont use neg timeout to mask anymore * Not required for MHP * Fix up source display Miniware * Fix race on PD init * Update POWThread.cpp * Update formatting * MHP format * Update push.yml * Faster TS80P I2C * Bugfix for IRQ handlers * Correctly handle I2C race on PD access * Fix CI error (unused var) and MHP IRQ * Test Pinecil alt ADC mode
93 lines
3.0 KiB
C
93 lines
3.0 KiB
C
#include "BSP_Flash.h"
|
|
#include "BSP_PD.h"
|
|
#include "BSP_Power.h"
|
|
#include "BSP_QC.h"
|
|
#include "Defines.h"
|
|
#include "configuration.h"
|
|
#include <stdbool.h>
|
|
#include <stdint.h>
|
|
/*
|
|
* BSP.h -- Board Support
|
|
*
|
|
* This exposes functions that are expected to be implemented to add support for different hardware
|
|
*/
|
|
|
|
#ifndef BSP_BSP_H_
|
|
#define BSP_BSP_H_
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
// maximum htim2 PWM value
|
|
extern const uint16_t powerPWM;
|
|
// htim2.Init.Period, the full PWM cycle
|
|
extern uint16_t totalPWM;
|
|
|
|
// Called first thing in main() to init the hardware
|
|
void preRToSInit();
|
|
// Called once the RToS has started for any extra work
|
|
void postRToSInit();
|
|
|
|
// Called once from preRToSInit()
|
|
void BSPInit(void);
|
|
|
|
// Called to reset the hardware watchdog unit
|
|
void resetWatchdog();
|
|
// Accepts a output level of 0.. to use to control the tip output PWM
|
|
void setTipPWM(const uint8_t pulse, const bool shouldUseFastModePWM);
|
|
// Returns the Handle temp in C, X10
|
|
uint16_t getHandleTemperature(uint8_t sample);
|
|
// Returns the Tip temperature ADC reading in raw units
|
|
uint16_t getTipRawTemp(uint8_t refresh);
|
|
// Returns the main DC input voltage, using the adjustable divisor + sample flag
|
|
uint16_t getInputVoltageX10(uint16_t divisor, uint8_t sample);
|
|
|
|
// Readers for the two buttons
|
|
// !! Returns 1 if held down, 0 if released
|
|
uint8_t getButtonA();
|
|
uint8_t getButtonB();
|
|
|
|
// This is a work around that will be called if I2C starts to bug out
|
|
// This should toggle the SCL line until SDA goes high to end the current transaction
|
|
void unstick_I2C();
|
|
|
|
// Reboot the IC when things go seriously wrong
|
|
void reboot();
|
|
|
|
// If the user has programmed in a bootup logo, draw it to the screen from flash
|
|
// Returns 1 if the logo was printed so that the unit waits for the timeout or button
|
|
uint8_t showBootLogoIfavailable();
|
|
// delay wrapper for delay using the hardware timer (used before RTOS)
|
|
void delay_ms(uint16_t count);
|
|
// Probe if the Hall sensor is fitted to the unit
|
|
bool getHallSensorFitted();
|
|
// If the iron has a hall effect sensor in the handle, return an signed count of the reading
|
|
// If the sensor is single polarity (or polarity insensitive) just return 0..32768
|
|
int16_t getRawHallEffect();
|
|
|
|
// Returns true if power is from dumb "DC" input rather than "smart" QC or PD
|
|
bool getIsPoweredByDCIN();
|
|
|
|
// Logs the system state to a debug interface if supported
|
|
void log_system_state(int32_t PWMWattsx10);
|
|
|
|
// Returns true if the tip is disconnected
|
|
bool isTipDisconnected();
|
|
|
|
// Status LED controls
|
|
|
|
enum StatusLED {
|
|
LED_OFF = 0, // Turn off status led
|
|
LED_STANDBY, // unit is in sleep /standby
|
|
LED_HEATING, // The unit is heating up to temperature
|
|
LED_HOT, // The unit is at operating temperature
|
|
LED_COOLING_STILL_HOT, // The unit is off and cooling but still hot
|
|
LED_UNKNOWN, //
|
|
};
|
|
void setStatusLED(const enum StatusLED state);
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
#endif /* BSP_BSP_H_ */
|