246 lines
7.8 KiB
C++
246 lines
7.8 KiB
C++
|
|
#include "OperatingModes.h"
|
|
void gui_solderingMode(uint8_t jumpToSleep) {
|
|
/*
|
|
* * Soldering (gui_solderingMode)
|
|
* -> Main loop where we draw temp, and animations
|
|
* --> User presses buttons and they goto the temperature adjust screen
|
|
* ---> Display the current setpoint temperature
|
|
* ---> Use buttons to change forward and back on temperature
|
|
* ---> Both buttons or timeout for exiting
|
|
* --> Long hold front button to enter boost mode
|
|
* ---> Just temporarily sets the system into the alternate temperature for
|
|
* PID control
|
|
* --> Long hold back button to exit
|
|
* --> Double button to exit
|
|
* --> Long hold double button to toggle key lock
|
|
*/
|
|
bool boostModeOn = false;
|
|
bool buttonsLocked = false;
|
|
|
|
if (jumpToSleep) {
|
|
if (gui_SolderingSleepingMode(jumpToSleep == 2, true) == 1) {
|
|
lastButtonTime = xTaskGetTickCount();
|
|
return; // If the function returns non-0 then exit
|
|
}
|
|
}
|
|
for (;;) {
|
|
ButtonState buttons = getButtonState();
|
|
if (buttonsLocked && (getSettingValue(SettingsOptions::LockingMode) != 0)) { // If buttons locked
|
|
switch (buttons) {
|
|
case BUTTON_NONE:
|
|
boostModeOn = false;
|
|
break;
|
|
case BUTTON_BOTH_LONG:
|
|
// Unlock buttons
|
|
buttonsLocked = false;
|
|
warnUser(translatedString(Tr->UnlockingKeysString), TICKS_SECOND);
|
|
break;
|
|
case BUTTON_F_LONG:
|
|
// if boost mode is enabled turn it on
|
|
if (getSettingValue(SettingsOptions::BoostTemp) && (getSettingValue(SettingsOptions::LockingMode) == 1)) {
|
|
boostModeOn = true;
|
|
}
|
|
break;
|
|
// fall through
|
|
case BUTTON_BOTH:
|
|
case BUTTON_B_LONG:
|
|
case BUTTON_F_SHORT:
|
|
case BUTTON_B_SHORT:
|
|
// Do nothing and display a lock warning
|
|
warnUser(translatedString(Tr->WarningKeysLockedString), TICKS_SECOND / 2);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
} else { // Button not locked
|
|
switch (buttons) {
|
|
case BUTTON_NONE:
|
|
// stay
|
|
boostModeOn = false;
|
|
break;
|
|
case BUTTON_BOTH:
|
|
case BUTTON_B_LONG:
|
|
return; // exit on back long hold
|
|
case BUTTON_F_LONG:
|
|
// if boost mode is enabled turn it on
|
|
if (getSettingValue(SettingsOptions::BoostTemp))
|
|
boostModeOn = true;
|
|
break;
|
|
case BUTTON_F_SHORT:
|
|
case BUTTON_B_SHORT: {
|
|
uint16_t oldTemp = getSettingValue(SettingsOptions::SolderingTemp);
|
|
gui_solderingTempAdjust(); // goto adjust temp mode
|
|
if (oldTemp != getSettingValue(SettingsOptions::SolderingTemp)) {
|
|
saveSettings(); // only save on change
|
|
}
|
|
} break;
|
|
case BUTTON_BOTH_LONG:
|
|
if (getSettingValue(SettingsOptions::LockingMode) != 0) {
|
|
// Lock buttons
|
|
buttonsLocked = true;
|
|
warnUser(translatedString(Tr->LockingKeysString), TICKS_SECOND);
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
// else we update the screen information
|
|
|
|
OLED::clearScreen();
|
|
|
|
// Draw in the screen details
|
|
if (getSettingValue(SettingsOptions::DetailedSoldering)) {
|
|
if (OLED::getRotation()) {
|
|
OLED::setCursor(50, 0);
|
|
} else {
|
|
OLED::setCursor(-1, 0);
|
|
}
|
|
gui_drawTipTemp(true, FontStyle::LARGE);
|
|
|
|
#ifndef NO_SLEEP_MODE
|
|
if (getSettingValue(SettingsOptions::Sensitivity) && getSettingValue(SettingsOptions::SleepTime)) {
|
|
if (OLED::getRotation()) {
|
|
OLED::setCursor(32, 0);
|
|
} else {
|
|
OLED::setCursor(47, 0);
|
|
}
|
|
printCountdownUntilSleep(getSleepTimeout());
|
|
}
|
|
#endif
|
|
|
|
if (boostModeOn) {
|
|
if (OLED::getRotation()) {
|
|
OLED::setCursor(38, 8);
|
|
} else {
|
|
OLED::setCursor(55, 8);
|
|
}
|
|
OLED::print(SymbolPlus, FontStyle::SMALL);
|
|
}
|
|
|
|
if (OLED::getRotation()) {
|
|
OLED::setCursor(0, 0);
|
|
} else {
|
|
OLED::setCursor(67, 0);
|
|
}
|
|
OLED::printNumber(x10WattHistory.average() / 10, 2, FontStyle::SMALL);
|
|
OLED::print(SymbolDot, FontStyle::SMALL);
|
|
OLED::printNumber(x10WattHistory.average() % 10, 1, FontStyle::SMALL);
|
|
OLED::print(SymbolWatts, FontStyle::SMALL);
|
|
|
|
if (OLED::getRotation()) {
|
|
OLED::setCursor(0, 8);
|
|
} else {
|
|
OLED::setCursor(67, 8);
|
|
}
|
|
printVoltage();
|
|
OLED::print(SymbolVolts, FontStyle::SMALL);
|
|
} else {
|
|
OLED::setCursor(0, 0);
|
|
// We switch the layout direction depending on the orientation of the oled
|
|
if (OLED::getRotation()) {
|
|
// battery
|
|
gui_drawBatteryIcon();
|
|
OLED::print(SymbolSpace, FontStyle::LARGE); // Space out gap between battery <-> temp
|
|
gui_drawTipTemp(true, FontStyle::LARGE); // Draw current tip temp
|
|
|
|
// We draw boost arrow if boosting, or else gap temp <-> heat
|
|
// indicator
|
|
if (boostModeOn)
|
|
OLED::drawSymbol(2);
|
|
else
|
|
OLED::print(SymbolSpace, FontStyle::LARGE);
|
|
|
|
// Draw heating/cooling symbols
|
|
OLED::drawHeatSymbol(X10WattsToPWM(x10WattHistory.average()));
|
|
} else {
|
|
// Draw heating/cooling symbols
|
|
OLED::drawHeatSymbol(X10WattsToPWM(x10WattHistory.average()));
|
|
// We draw boost arrow if boosting, or else gap temp <-> heat
|
|
// indicator
|
|
if (boostModeOn)
|
|
OLED::drawSymbol(2);
|
|
else
|
|
OLED::print(SymbolSpace, FontStyle::LARGE);
|
|
gui_drawTipTemp(true, FontStyle::LARGE); // Draw current tip temp
|
|
|
|
OLED::print(SymbolSpace, FontStyle::LARGE); // Space out gap between battery <-> temp
|
|
|
|
gui_drawBatteryIcon();
|
|
}
|
|
}
|
|
OLED::refresh();
|
|
// Update the setpoints for the temperature
|
|
if (boostModeOn) {
|
|
if (getSettingValue(SettingsOptions::TemperatureInF))
|
|
currentTempTargetDegC = TipThermoModel::convertFtoC(getSettingValue(SettingsOptions::BoostTemp));
|
|
else {
|
|
currentTempTargetDegC = (getSettingValue(SettingsOptions::BoostTemp));
|
|
}
|
|
} else {
|
|
if (getSettingValue(SettingsOptions::TemperatureInF))
|
|
currentTempTargetDegC = TipThermoModel::convertFtoC(getSettingValue(SettingsOptions::SolderingTemp));
|
|
else {
|
|
currentTempTargetDegC = (getSettingValue(SettingsOptions::SolderingTemp));
|
|
}
|
|
}
|
|
|
|
#ifdef POW_DC
|
|
// Undervoltage test
|
|
if (checkForUnderVoltage()) {
|
|
lastButtonTime = xTaskGetTickCount();
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
#ifdef ACCEL_EXITS_ON_MOVEMENT
|
|
// If the accel works in reverse where movement will cause exiting the soldering mode
|
|
if (getSettingValue(SettingsOptions::Sensitivity)) {
|
|
if (lastMovementTime) {
|
|
if (lastMovementTime > TICKS_SECOND * 10) {
|
|
// If we have moved recently; in the last second
|
|
// Then exit soldering mode
|
|
|
|
if (((TickType_t)(xTaskGetTickCount() - lastMovementTime)) < (TickType_t)(TICKS_SECOND)) {
|
|
currentTempTargetDegC = 0;
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
#ifdef NO_SLEEP_MODE
|
|
// No sleep mode, but still want shutdown timeout
|
|
|
|
if (shouldShutdown()) {
|
|
// shutdown
|
|
currentTempTargetDegC = 0;
|
|
return; // we want to exit soldering mode
|
|
}
|
|
#endif
|
|
if (shouldBeSleeping()) {
|
|
if (gui_SolderingSleepingMode(false, false)) {
|
|
return; // If the function returns non-0 then exit
|
|
}
|
|
}
|
|
// Update LED status
|
|
int error = currentTempTargetDegC - TipThermoModel::getTipInC();
|
|
if (error >= -10 && error <= 10) {
|
|
// converged
|
|
setStatusLED(LED_HOT);
|
|
} else {
|
|
setStatusLED(LED_HEATING);
|
|
}
|
|
// If we have tripped thermal runaway, turn off heater and show warning
|
|
if (heaterThermalRunaway) {
|
|
currentTempTargetDegC = 0; // heater control off
|
|
warnUser(translatedString(Tr->WarningThermalRunaway), 10 * TICKS_SECOND);
|
|
heaterThermalRunaway = false;
|
|
return;
|
|
}
|
|
// slow down ui update rate
|
|
GUIDelay();
|
|
}
|
|
}
|