1d63a3d7bc
There is no space on the screen to output 3 digits, and the corresponding display function assumes the value is less than 100.
147 lines
5.4 KiB
C
147 lines
5.4 KiB
C
#pragma once
|
|
#include "Model_Config.h"
|
|
/**
|
|
* Configuration.h
|
|
* Define here your default pre settings for TS80 or TS100
|
|
*
|
|
*/
|
|
|
|
//===========================================================================
|
|
//============================= Default Settings ============================
|
|
//===========================================================================
|
|
/**
|
|
* Default soldering temp is 320.0 C
|
|
* Temperature the iron sleeps at - default 150.0 C
|
|
*/
|
|
#define SOLDERING_TEMP 320 // Default soldering temp is 320.0 °C
|
|
#define SLEEP_TEMP 150 // Default sleep temperature
|
|
#define BOOST_TEMP 420 // Default boost temp.
|
|
#define BOOST_MODE_ENABLED 1 // 0: Disable 1: Enable
|
|
|
|
/**
|
|
* Blink the temperature on the cooling screen when its > 50C
|
|
*/
|
|
#define COOLING_TEMP_BLINK 0 // 0: Disable 1: Enable
|
|
|
|
/**
|
|
* How many seconds/minutes we wait until going to sleep/shutdown.
|
|
* Values -> SLEEP_TIME * 10; i.e. 5*10 = 50 Seconds!
|
|
*/
|
|
#define SLEEP_TIME 5 // x10 Seconds
|
|
#define SHUTDOWN_TIME 10 // Minutes
|
|
|
|
/**
|
|
* Auto start off for safety.
|
|
* Pissible values are:
|
|
* 0 - none
|
|
* 1 - Soldering Temperature
|
|
* 2 - Sleep Temperature
|
|
* 3 - Sleep Off Temperature
|
|
*/
|
|
#define AUTO_START_MODE 0 // Default to none
|
|
|
|
/**
|
|
* OLED Orientation
|
|
*
|
|
*/
|
|
#define ORIENTATION_MODE 0 // 0: Right 1:Left 2:Automatic - Default right
|
|
#define REVERSE_BUTTON_TEMP_CHANGE 0 // 0:Default 1:Reverse - Reverse the plus and minus button assigment for temperatur change
|
|
|
|
/**
|
|
* Temp change settings
|
|
*/
|
|
#define TEMP_CHANGE_SHORT_STEP 1 // Default temp change short step +1
|
|
#define TEMP_CHANGE_LONG_STEP 10 // Default temp change long step +10
|
|
#define TEMP_CHANGE_SHORT_STEP_MAX 50 // Temp change short step MAX value
|
|
#define TEMP_CHANGE_LONG_STEP_MAX 90 // Temp change long step MAX value
|
|
|
|
/* Power pulse for keeping power banks awake*/
|
|
#define POWER_PULSE_INCREMENT 1
|
|
#define POWER_PULSE_MAX 50 // x10 max watts
|
|
#ifdef MODEL_TS100
|
|
#define POWER_PULSE_DEFAULT 0
|
|
#else
|
|
#define POWER_PULSE_DEFAULT 5
|
|
#endif
|
|
|
|
/**
|
|
* OLED Orientation Sensitivity on Automatic mode!
|
|
* Motion Sensitivity <0=Off 1=Least Sensitive 9=Most Sensitive>
|
|
*/
|
|
#define SENSITIVITY 7 // Default 7
|
|
|
|
/**
|
|
* Detailed soldering screen
|
|
* Detailed idle screen (off for first time users)
|
|
*/
|
|
#define DETAILED_SOLDERING 0 // 0: Disable 1: Enable - Default 0
|
|
#define DETAILED_IDLE 0 // 0: Disable 1: Enable - Default 0
|
|
|
|
#define CUT_OUT_SETTING 0 // default to no cut-off voltage (or 18W for TS80)
|
|
#define TEMPERATURE_INF 0 // default to 0
|
|
#define DESCRIPTION_SCROLL_SPEED 0 // 0: Slow 1: Fast - default to slow
|
|
#define POWER_LIMIT_ENABLE 0 // 0: Disable 1: Enable - Default disabled power limit
|
|
|
|
#define TIP_GAIN 210 // 21 uV/C * 10, uV per deg C constant of the tip, Tip uV * 10 / coeff = tip temp
|
|
|
|
#define OP_AMP_Rf_TS100 750*1000 // 750 Kilo-ohms -> From schematic, R1
|
|
#define OP_AMP_Rin_TS100 2370 // 2.37 Kilo-ohms -> From schematic, R2
|
|
|
|
#define OP_AMP_GAIN_STAGE_TS100 (1+(OP_AMP_Rf_TS100/OP_AMP_Rin_TS100))
|
|
|
|
#define OP_AMP_Rf_TS80 180*1000 // 180 Kilo-ohms -> From schematic, R6
|
|
#define OP_AMP_Rin_TS80 2000 // 2.0 Kilo-ohms -> From schematic, R3
|
|
|
|
#define OP_AMP_GAIN_STAGE_TS80 (1+(OP_AMP_Rf_TS80/OP_AMP_Rin_TS80))
|
|
|
|
//Deriving the Voltage div:
|
|
// Vin_max = (3.3*(r1+r2))/(r2)
|
|
//vdiv = (32768*4)/(vin_max*10)
|
|
|
|
#ifdef MODEL_TS100
|
|
#define VOLTAGE_DIV 467 // 467 - Default divider from schematic
|
|
#define CALIBRATION_OFFSET 900 // 900 - Default adc offset in uV
|
|
#define PID_POWER_LIMIT 70 // Sets the max pwm power limit
|
|
#define POWER_LIMIT 30 // 30 watts default limit
|
|
#define MAX_POWER_LIMIT 65 //
|
|
#define POWER_LIMIT_STEPS 5 //
|
|
#define OP_AMP_GAIN_STAGE OP_AMP_GAIN_STAGE_TS100
|
|
#endif
|
|
|
|
#ifdef MODEL_TS80
|
|
#define VOLTAGE_DIV 780 // Default divider from schematic
|
|
#define PID_POWER_LIMIT 24 // Sets the max pwm power limit
|
|
#define CALIBRATION_OFFSET 900 // the adc offset in uV
|
|
#define POWER_LIMIT 24 // 24 watts default power limit
|
|
#define MAX_POWER_LIMIT 30 //
|
|
#define POWER_LIMIT_STEPS 2
|
|
#define OP_AMP_GAIN_STAGE OP_AMP_GAIN_STAGE_TS80
|
|
#endif
|
|
|
|
#ifdef MODEL_TS80P
|
|
#define VOLTAGE_DIV 650 // Default for TS80P with slightly different resistors
|
|
#define PID_POWER_LIMIT 35 // Sets the max pwm power limit
|
|
#define CALIBRATION_OFFSET 900 // the adc offset in uV
|
|
#define POWER_LIMIT 30 // 30 watts default power limit
|
|
#define MAX_POWER_LIMIT 35 //
|
|
#define POWER_LIMIT_STEPS 2
|
|
#define OP_AMP_GAIN_STAGE OP_AMP_GAIN_STAGE_TS80
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef MODEL_TS100
|
|
const int32_t tipMass = 45; // X10 watts to raise 1 deg C in 1 second
|
|
const uint8_t tipResistance = 85; //x10 ohms, 8.5 typical for ts100, 4.5 typical for ts80
|
|
#endif
|
|
|
|
#ifdef MODEL_TS80
|
|
const uint32_t tipMass = 40;
|
|
const uint8_t tipResistance = 45; //x10 ohms, 4.5 typical for ts80 tips
|
|
#endif
|
|
|
|
#ifdef MODEL_TS80P
|
|
const uint32_t tipMass = 40;
|
|
const uint8_t tipResistance = 45; //x10 ohms, 4.5 typical for ts80 tips
|
|
#endif
|