15e51f9faa
This generates dedicates Translation.cpp files for translation language and derives all language-specific data from them. The Makefile is extended to also take care of generating these source files. This allows reuse of nearly all object files between builds of different languages for the same model and regenerating the translation sources if necessary. This speeds up the release builds and the normal write-compile-cycle considerably. It also eliminates miscompilations when manually building different languages.
73 lines
3.1 KiB
C
73 lines
3.1 KiB
C
/*
|
|
* Settings.h
|
|
*
|
|
* Created on: 29 Sep 2016
|
|
* Author: Ralim
|
|
*
|
|
* Houses the system settings and allows saving / restoring from flash
|
|
*/
|
|
|
|
#ifndef SETTINGS_H_
|
|
#define SETTINGS_H_
|
|
#include <stdint.h>
|
|
#define SETTINGSVERSION (0x25)
|
|
/*Change this if you change the struct below to prevent people getting \
|
|
out of sync*/
|
|
|
|
/*
|
|
* This struct must be a multiple of 2 bytes as it is saved / restored from
|
|
* flash in uint16_t chunks
|
|
*/
|
|
typedef struct {
|
|
uint8_t version; // Used to track if a reset is needed on firmware upgrade
|
|
|
|
uint16_t SolderingTemp; // current set point for the iron
|
|
uint16_t SleepTemp; // temp to drop to in sleep
|
|
uint8_t SleepTime; // minutes timeout to sleep
|
|
uint8_t minDCVoltageCells; // The voltage we cut out at for under voltage when powered by DC jack
|
|
uint8_t QCIdealVoltage; // Desired QC3.0 voltage (9,12,20V)
|
|
uint8_t OrientationMode : 2; // Selects between Auto,Right and left handed layouts
|
|
uint8_t sensitivity : 4; // Sensitivity of accelerometer (5 bits)
|
|
uint8_t autoStartMode : 2; // Should the unit automatically jump straight
|
|
// into soldering mode when power is applied
|
|
uint8_t ShutdownTime; // Time until unit shuts down if left alone
|
|
|
|
uint8_t coolingTempBlink : 1; // Should the temperature blink on the cool
|
|
// down screen until its <50C
|
|
uint8_t detailedIDLE : 1; // Detailed idle screen
|
|
uint8_t detailedSoldering : 1; // Detailed soldering screens
|
|
uint8_t temperatureInF : 1; // Should the temp be in F or C (true is F)
|
|
uint8_t descriptionScrollSpeed : 1; // Description scroll speed
|
|
uint8_t lockingMode : 2; // Store the locking mode
|
|
uint8_t KeepAwakePulse; // Keep Awake pulse power in 0.1 watts (10 = 1Watt)
|
|
|
|
uint16_t voltageDiv; // Voltage divisor factor
|
|
uint16_t BoostTemp; // Boost mode set point for the iron
|
|
uint16_t CalibrationOffset; // This stores the temperature offset for this tip
|
|
// in the iron.
|
|
|
|
uint8_t powerLimit; // Maximum power iron allowed to output
|
|
|
|
uint8_t ReverseButtonTempChangeEnabled; // Change the plus and minus button assigment
|
|
uint16_t TempChangeLongStep; // Change the plus and minus button assigment
|
|
uint16_t TempChangeShortStep; // Change the plus and minus button assigment
|
|
uint8_t hallEffectSensitivity; // Operating mode of the hall effect sensor
|
|
uint8_t accelMissingWarningCounter; // Counter of how many times we have warned we cannot detect the accelerometer
|
|
uint8_t pdMissingWarningCounter; // Counter of how many times we have warned we cannot detect the pd interface
|
|
|
|
uint32_t padding; // This is here for in case we are not an even divisor so
|
|
// that nothing gets cut off
|
|
// MUST BE LAST
|
|
|
|
} systemSettingsType;
|
|
|
|
extern volatile systemSettingsType systemSettings;
|
|
|
|
void saveSettings();
|
|
bool restoreSettings();
|
|
uint8_t lookupVoltageLevel();
|
|
uint16_t lookupHallEffectThreshold();
|
|
void resetSettings();
|
|
|
|
#endif /* SETTINGS_H_ */
|