sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity
Files
078b8f5626aae409190c4748588dd5f018f01e7c
IronOS/source/Core/BSP/MHP30
History
Ben V. Brown 078b8f5626 DeviceID (#1314) 
* Ability to print hex

* Add device ID getter

* Refactor debug menu

* No longer need patch

* Update make_translation.py

* Fix typo

* Fix hex drawing
2022-06-16 21:39:53 +10:00
..
Vendor
Fixes for I2C on Pinecil + USB-PD stack (#1099)
2021-10-02 14:48:58 +10:00
BSP.cpp
DeviceID (#1314)
2022-06-16 21:39:53 +10:00
configuration.h
Logo rework (#1232)
2022-03-14 09:08:05 +11:00
flash.c
Adding MHP30 to makefile
2021-04-27 21:44:35 +10:00
FreeRTOSConfig.h
Import miniware files
2021-04-26 20:58:39 +10:00
fusb_user.cpp
Fixes for I2C on Pinecil + USB-PD stack (#1099)
2021-10-02 14:48:58 +10:00
I2C_Wrapper.cpp
Import miniware files
2021-04-26 20:58:39 +10:00
IRQ.cpp
Fixes for I2C on Pinecil + USB-PD stack (#1099)
2021-10-02 14:48:58 +10:00
IRQ.h
ADC IRQ's
2021-04-26 22:27:50 +10:00
Pins.h
Unify settings for each model into once place
2021-09-15 20:24:41 +10:00
port.c
Import miniware files
2021-04-26 20:58:39 +10:00
portmacro.h
Import miniware files
2021-04-26 20:58:39 +10:00
postRTOS.cpp
Fixes for I2C on Pinecil + USB-PD stack (#1099)
2021-10-02 14:48:58 +10:00
Power.cpp
Fixes for I2C on Pinecil + USB-PD stack (#1099)
2021-10-02 14:48:58 +10:00
preRTOS.cpp
Fixes for I2C on Pinecil + USB-PD stack (#1099)
2021-10-02 14:48:58 +10:00
QC_GPIO.cpp
Rough pass
2021-09-17 21:13:21 +10:00
README.md
Import miniware files
2021-04-26 20:58:39 +10:00
Setup.c
Add buzzer beep when at temperature 🎵
2021-05-05 19:19:00 +10:00
Setup.h
WiP on WS2812 Protocol driver
2021-05-02 21:22:29 +10:00
Software_I2C.h
Unify settings for each model into once place
2021-09-15 20:24:41 +10:00
stm32f1xx_hal_msp.c
Format new content
2021-05-03 22:10:14 +10:00
stm32f1xx_hal_timebase_TIM.c
Setting up TIM1 for WS2812
2021-05-02 17:42:41 +10:00
stm32f1xx_it.c
Format new content
2021-05-03 22:10:14 +10:00
stm32f103.ld
Move ld file into bsp
2021-04-27 21:44:21 +10:00
system_stm32f1xx.c
Fix bootloader size
2021-05-04 18:54:09 +10:00
ThermoModel.cpp
Startup behaviour fixes (#1306)
2022-06-16 20:21:46 +10:00

README.md

BSP section for STM32F103 based Miniware products

This folder contains the hardware abstractions required for the TS100, TS80 and probably TS80P soldering irons.

Main abstractions

  • Hardware Init
  • -> Should contain all bootstrap to bring the hardware up to an operating point
  • -> Two functions are required, a pre and post FreeRToS call
  • I2C read/write
  • Set PWM for the tip
  • Links between IRQ's on the system and the calls in the rest of the firmware
View Git Blame Copy Permalink