#pragma once
#include "Model_Config.h"
/**
 * Configuration.h
 * Define here your default pre settings for TS80 or TS100
 * 
 */

//===========================================================================
//============================= Default Settings ============================
//===========================================================================
/**
 * Default soldering temp is 320.0 C
 * Temperature the iron sleeps at - default 150.0 C
 */
#define SOLDERING_TEMP           320        // Default soldering temp is 320.0 °C
#define SLEEP_TEMP               150        // Default sleep temperature
#define BOOST_TEMP               420        // Default boost temp. 
#define BOOST_MODE_ENABLED       1          // 0: Disable 1: Enable

/**
 * Blink the temperature on the cooling screen when its > 50C 
 */
#define COOLING_TEMP_BLINK       0          // 0: Disable 1: Enable

/**
 * How many seconds/minutes we wait until going to sleep/shutdown.
 * Values -> SLEEP_TIME * 10; i.e. 5*10 = 50 Seconds! 
 */
#define SLEEP_TIME                5         // x10 Seconds
#define SHUTDOWN_TIME            10         // Minutes

/**
 * Auto start off for safety.
 * Pissible values are:  
 *  0 - none 
 *  1 - Soldering Temperature
 *  2 - Sleep Temperature 
 *  3 - Sleep Off Temperature 
 */
#define AUTO_START_MODE           0         // Default to none

/**
 * OLED Orientation
 * 
 */
#define ORIENTATION_MODE            0         // 0: Right 1:Left 2:Automatic - Default right
#define REVERSE_BUTTON_TEMP_CHANGE  0         // 0:Default 1:Reverse - Reverse the plus and minus button assigment for temperatur change

/**
 * Temp change settings
 */
#define TEMP_CHANGE_SHORT_STEP      1         // Default temp change short step +1
#define TEMP_CHANGE_LONG_STEP       10        // Default temp change long step +10
#define TEMP_CHANGE_SHORT_STEP_MAX  50        // Temp change short step MAX value
#define TEMP_CHANGE_LONG_STEP_MAX   90       // Temp change long step MAX value

/* Power pulse for keeping power banks awake*/
#define POWER_PULSE_INCREMENT 1
#define POWER_PULSE_MAX 50 // x10 max watts
#ifdef MODEL_TS100
#define POWER_PULSE_DEFAULT 0
#else
#define POWER_PULSE_DEFAULT 5
#endif

/**
 * OLED Orientation Sensitivity on Automatic mode!
 * Motion Sensitivity <0=Off 1=Least Sensitive 9=Most Sensitive>
 */
#define SENSITIVITY               7         // Default 7

/**
 * Detailed soldering screen
 * Detailed idle screen (off for first time users)
 */
#define DETAILED_SOLDERING        0         // 0: Disable 1: Enable - Default 0
#define DETAILED_IDLE             0         // 0: Disable 1: Enable - Default 0

#define CUT_OUT_SETTING           0         // default to no cut-off voltage (or 18W for TS80)
#define TEMPERATURE_INF           0         // default to 0
#define DESCRIPTION_SCROLL_SPEED  0         // 0: Slow 1: Fast - default to slow

#define TIP_GAIN                210       // 21 uV/C * 10, uV per deg C constant of the tip, Tip uV * 10 / coeff = tip temp

#define OP_AMP_Rf_TS100         750*1000  // 750  Kilo-ohms -> From schematic, R1
#define OP_AMP_Rin_TS100        2370      // 2.37 Kilo-ohms -> From schematic, R2

#define  OP_AMP_GAIN_STAGE_TS100 (1+(OP_AMP_Rf_TS100/OP_AMP_Rin_TS100))

#define OP_AMP_Rf_TS80          180*1000  //  180  Kilo-ohms -> From schematic, R6
#define OP_AMP_Rin_TS80         2000      //  2.0  Kilo-ohms -> From schematic, R3

#define OP_AMP_GAIN_STAGE_TS80 (1+(OP_AMP_Rf_TS80/OP_AMP_Rin_TS80))

//Deriving the Voltage div:
// Vin_max = (3.3*(r1+r2))/(r2)
//vdiv = (32768*4)/(vin_max*10)

#ifdef MODEL_TS100
  #define VOLTAGE_DIV             467       // 467 - Default divider from schematic
  #define CALIBRATION_OFFSET      900       // 900 - Default adc offset in uV
  #define PID_POWER_LIMIT         70        // Sets the max pwm power limit
  #define POWER_LIMIT             30        // 30 watts default limit
  #define MAX_POWER_LIMIT         65        //
  #define POWER_LIMIT_STEPS       5        //
  #define OP_AMP_GAIN_STAGE       OP_AMP_GAIN_STAGE_TS100
#endif

#ifdef MODEL_TS80
#define VOLTAGE_DIV             780       // Default divider from schematic
#define PID_POWER_LIMIT         24        // Sets the max pwm power limit
#define CALIBRATION_OFFSET      900       // the adc offset in uV
#define POWER_LIMIT             24        // 24 watts default power limit
#define MAX_POWER_LIMIT         30        //
#define POWER_LIMIT_STEPS       2
#define OP_AMP_GAIN_STAGE       OP_AMP_GAIN_STAGE_TS80
#endif

#ifdef MODEL_TS80P
#define VOLTAGE_DIV		        650       // Default for TS80P with slightly different resistors
#define PID_POWER_LIMIT         35        // Sets the max pwm power limit
#define CALIBRATION_OFFSET      900       // the adc offset in uV
#define POWER_LIMIT             30        // 30 watts default power limit
#define MAX_POWER_LIMIT         35        //
#define POWER_LIMIT_STEPS       2
#define OP_AMP_GAIN_STAGE       OP_AMP_GAIN_STAGE_TS80
#endif



#ifdef MODEL_TS100
const int32_t tipMass = 45; // X10 watts to raise 1 deg C in 1 second
const uint8_t tipResistance = 85; //x10 ohms, 8.5 typical for ts100, 4.5 typical for ts80
#endif

#ifdef MODEL_TS80
const uint32_t tipMass = 40;
const uint8_t tipResistance = 45; //x10 ohms, 4.5 typical for ts80 tips
#endif

#ifdef MODEL_TS80P
const uint32_t tipMass = 40;
const uint8_t tipResistance = 45; //x10 ohms, 4.5 typical for ts80 tips
#endif