{
	"languageCode": "EN",
	"languageLocalName": "English",
	"fonts": [
		"ascii_basic"
	],
	"tempUnitFahrenheit": true,
	"messages": {
		"SettingsCalibrationDone": "Calibration done!",
		"SettingsCalibrationWarning": "Please ensure the tip is at room temperature, before continuing!",
		"SettingsResetWarning": "Sure you want to restore default settings?",
		"UVLOWarningString": "DC LOW",
		"UndervoltageString": "Undervoltage",
		"InputVoltageString": "Input V: ",
		"WarningTipTempString": "Tip temp: ",
		"BadTipString": "BAD TIP",
		"SleepingSimpleString": "Zzzz",
		"SleepingAdvancedString": "Sleeping...",
		"WarningSimpleString": "HOT!",
		"WarningAdvancedString": "!!! HOT TIP !!!",
		"SleepingTipAdvancedString": "Tip:",
		"IdleTipString": "Tip:",
		"IdleSetString": " Set:",
		"TipDisconnectedString": "NO TIP",
		"SolderingAdvancedPowerPrompt": "Power: ",
		"OffString": "Off",
		"YourGainMessage": "Your gain:"
	},
	"messagesWarn": {
		"ResetOKMessage": "Reset OK",
		"SettingsResetMessage": [
			"Settings were",
			"reset!"
		],
		"NoAccelerometerMessage": [
			"No accelerometer",
			"detected!"
		],
		"NoPowerDeliveryMessage": [
			"No USB-PD IC",
			"detected!"
		],
		"LockingKeysString": "LOCKED",
		"UnlockingKeysString": "UNLOCKED",
		"WarningKeysLockedString": "!LOCKED!"
	},
	"characters": {
		"SettingRightChar": "R",
		"SettingLeftChar": "L",
		"SettingAutoChar": "A",
		"SettingOffChar": "O",
		"SettingSlowChar": "S",
		"SettingMediumChar": "M",
		"SettingFastChar": "F",
		"SettingStartNoneChar": "O",
		"SettingStartSolderingChar": "S",
		"SettingStartSleepChar": "Z",
		"SettingStartSleepOffChar": "R",
		"SettingSensitivityOff": "O",
		"SettingSensitivityLow": "L",
		"SettingSensitivityMedium": "M",
		"SettingSensitivityHigh": "H",
		"SettingLockDisableChar": "D",
		"SettingLockBoostChar": "B",
		"SettingLockFullChar": "F",
		"SettingNAChar": "N/A"
	},
	"menuGroups": {
		"PowerMenu": {
			"text2": [
				"Power",
				"settings"
			],
			"desc": "Power settings"
		},
		"SolderingMenu": {
			"text2": [
				"Soldering",
				"settings"
			],
			"desc": "Soldering settings"
		},
		"PowerSavingMenu": {
			"text2": [
				"Sleep",
				"mode"
			],
			"desc": "Power saving settings"
		},
		"UIMenu": {
			"text2": [
				"User",
				"interface"
			],
			"desc": "User interface settings"
		},
		"AdvancedMenu": {
			"text2": [
				"Advanced",
				"settings"
			],
			"desc": "Advanced settings"
		}
	},
	"menuOptions": {
		"DCInCutoff": {
			"text2": [
				"Power",
				"source"
			],
			"desc": "Power source. Sets cutoff voltage. (DC 10V) (S 3.3V per cell, disable power limit)"
		},
		"SleepTemperature": {
			"text2": [
				"Sleep",
				"temp"
			],
			"desc": "Tip temperature while in \"sleep mode\""
		},
		"SleepTimeout": {
			"text2": [
				"Sleep",
				"timeout"
			],
			"desc": "Interval before \"sleep mode\" kicks in (S=seconds | M=minutes)"
		},
		"ShutdownTimeout": {
			"text2": [
				"Shutdown",
				"timeout"
			],
			"desc": "Interval before the iron shuts down (M=minutes)"
		},
		"MotionSensitivity": {
			"text2": [
				"Motion",
				"sensitivity"
			],
			"desc": "0=off | 1=least sensitive | ... | 9=most sensitive"
		},
		"TemperatureUnit": {
			"text2": [
				"Temperature",
				"unit"
			],
			"desc": "C=Celsius | F=Fahrenheit"
		},
		"AdvancedIdle": {
			"text2": [
				"Detailed",
				"idle screen"
			],
			"desc": "Display detailed information in a smaller font on the idle screen"
		},
		"DisplayRotation": {
			"text2": [
				"Display",
				"orientation"
			],
			"desc": "R=right-handed | L=left-handed | A=automatic"
		},
		"BoostTemperature": {
			"text2": [
				"Boost",
				"temp"
			],
			"desc": "Temperature used in \"boost mode\""
		},
		"AutoStart": {
			"text2": [
				"Heat",
				"on power up"
			],
			"desc": "O=off | S=soldering temp | Z=standby at sleep temp until moved | R=standby without heating until moved"
		},
		"CooldownBlink": {
			"text2": [
				"Cooldown",
				"blink"
			],
			"desc": "Flash the temperature reading after heating was halted while the tip is still hot"
		},
		"TemperatureCalibration": {
			"text2": [
				"Calibrate",
				"temperature?"
			],
			"desc": "Start tip temperature offset calibration"
		},
		"SettingsReset": {
			"text2": [
				"Factory",
				"reset?"
			],
			"desc": "Reset settings to default"
		},
		"VoltageCalibration": {
			"text2": [
				"Calibrate",
				"input voltage?"
			],
			"desc": "Start VIN calibration (long press to exit)"
		},
		"AdvancedSoldering": {
			"text2": [
				"Detailed",
				"solder screen"
			],
			"desc": "Display detailed information in a smaller font on soldering screen"
		},
		"ScrollingSpeed": {
			"text2": [
				"Scrolling",
				"speed"
			],
			"desc": "Speed info text scrolls past at (S=slow | F=fast)"
		},
		"QCMaxVoltage": {
			"text2": [
				"QC",
				"voltage"
			],
			"desc": "Max QC voltage the iron should negotiate for"
		},
		"PowerLimit": {
			"text2": [
				"Power",
				"limit"
			],
			"desc": "Maximum power the iron can use (W=watt)"
		},
		"ReverseButtonTempChange": {
			"text2": [
				"Reverse",
				"+ - keys"
			],
			"desc": "Reverse assignment of temperature adjustment buttons"
		},
		"TempChangeShortStep": {
			"text2": [
				"Temp change",
				"short"
			],
			"desc": "Temperature change increment on short button press"
		},
		"TempChangeLongStep": {
			"text2": [
				"Temp change",
				"long"
			],
			"desc": "Temperature change increment on long button press"
		},
		"PowerPulsePower": {
			"text2": [
				"Power",
				"pulse"
			],
			"desc": "Intensity of power of keep-awake-pulse (watt)"
		},
		"HallEffSensitivity": {
			"text2": [
				"Hall sensor",
				"sensitivity"
			],
			"desc": "Sensitivity of the Hall effect sensor to detect sleep (O=off | L=low | M=medium | H=high)"
		},
		"LockingMode": {
			"text2": [
				"Allow locking",
				"buttons"
			],
			"desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
		},
		"MinVolCell": {
			"text2": [
				"Minimum",
				"voltage"
			],
			"desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
		},
		"AnimLoop": {
			"text2": [
				"Anim.",
				"loop"
			],
			"desc": "Loop icon animations in main menu"
		},
		"AnimSpeed": {
			"text2": [
				"Anim.",
				"speed"
			],
			"desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
		},
		"PowerPulseWait": {
			"text2": [
				"Power pulse",
				"delay"
			],
			"desc": "Delay before keep-awake pulse is triggered (x 2.5s)"
		},
		"PowerPulseDuration": {
			"text2": [
				"Power pulse",
				"duration"
			],
			"desc": "Keep-awake-pulse duration (x 250ms)"
		},
		"LanguageSwitch": {
			"text2": [
				"Language:",
				" EN     English"
			],
			"desc": ""
		}
	}
}