{
  "languageCode": "EN",
  "languageLocalName": "English",
  "fonts": ["ascii_basic"],
  "tempUnitFahrenheit": true,
  "messages": {
    "SettingsCalibrationDone": "Calibration done!",
    "SettingsCalibrationWarning": "Please ensure the tip is at room temperature, before continuing!",
    "SettingsResetWarning": "Sure you want to restore default settings?",
    "UVLOWarningString": "DC LOW",
    "UndervoltageString": "Undervoltage",
    "InputVoltageString": "Input V: ",
    "WarningTipTempString": "Tip temp: ",
    "BadTipString": "BAD TIP",
    "SleepingSimpleString": "Zzzz",
    "SleepingAdvancedString": "Sleeping...",
    "WarningSimpleString": "HOT!",
    "WarningAdvancedString": "!!! HOT TIP !!!",
    "SleepingTipAdvancedString": "Tip:",
    "IdleTipString": "Tip:",
    "IdleSetString": " Set:",
    "TipDisconnectedString": "NO TIP",
    "SolderingAdvancedPowerPrompt": "Power: ",
    "OffString": "Off",
    "YourGainMessage": "Your gain:"
  },
  "messagesWarn": {
    "ResetOKMessage": "Reset OK",
    "SettingsResetMessage": ["Some settings", "changed"],
    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
    "LockingKeysString": "LOCKED",
    "UnlockingKeysString": "UNLOCKED",
    "WarningKeysLockedString": "!LOCKED!",
    "WarningThermalRunaway": ["Thermal", "Runaway"]
  },
  "characters": {
    "SettingRightChar": "R",
    "SettingLeftChar": "L",
    "SettingAutoChar": "A",
    "SettingOffChar": "O",
    "SettingSlowChar": "S",
    "SettingMediumChar": "M",
    "SettingFastChar": "F",
    "SettingStartNoneChar": "O",
    "SettingStartSolderingChar": "S",
    "SettingStartSleepChar": "Z",
    "SettingStartSleepOffChar": "R",
    "SettingSensitivityOff": "O",
    "SettingSensitivityLow": "L",
    "SettingSensitivityMedium": "M",
    "SettingSensitivityHigh": "H",
    "SettingLockDisableChar": "D",
    "SettingLockBoostChar": "B",
    "SettingLockFullChar": "F",
    "SettingNAChar": "N/A"
  },
  "menuGroups": {
    "PowerMenu": {
      "text2": ["Power", "settings"],
      "desc": "Power settings"
    },
    "SolderingMenu": {
      "text2": ["Soldering", "settings"],
      "desc": "Soldering settings"
    },
    "PowerSavingMenu": {
      "text2": ["Sleep", "mode"],
      "desc": "Power saving settings"
    },
    "UIMenu": {
      "text2": ["User", "interface"],
      "desc": "User interface settings"
    },
    "AdvancedMenu": {
      "text2": ["Advanced", "settings"],
      "desc": "Advanced settings"
    }
  },
  "menuOptions": {
    "DCInCutoff": {
      "text2": ["Power", "source"],
      "desc": "Power source. Sets cutoff voltage. (DC 10V) (S 3.3V per cell, disable power limit)"
    },
    "SleepTemperature": {
      "text2": ["Sleep", "temp"],
      "desc": "Tip temperature while in \"sleep mode\""
    },
    "SleepTimeout": {
      "text2": ["Sleep", "timeout"],
      "desc": "Interval before \"sleep mode\" kicks in (S=seconds | M=minutes)"
    },
    "ShutdownTimeout": {
      "text2": ["Shutdown", "timeout"],
      "desc": "Interval before the iron shuts down (M=minutes)"
    },
    "MotionSensitivity": {
      "text2": ["Motion", "sensitivity"],
      "desc": "0=off | 1=least sensitive | ... | 9=most sensitive"
    },
    "TemperatureUnit": {
      "text2": ["Temperature", "unit"],
      "desc": "C=Celsius | F=Fahrenheit"
    },
    "AdvancedIdle": {
      "text2": ["Detailed", "idle screen"],
      "desc": "Display detailed information in a smaller font on the idle screen"
    },
    "DisplayRotation": {
      "text2": ["Display", "orientation"],
      "desc": "R=right-handed | L=left-handed | A=automatic"
    },
    "BoostTemperature": {
      "text2": ["Boost", "temp"],
      "desc": "Temperature used in \"boost mode\""
    },
    "AutoStart": {
      "text2": ["Heat", "on power up"],
      "desc": "O=off | S=soldering temp | Z=standby at sleep temp until moved | R=standby without heating until moved"
    },
    "CooldownBlink": {
      "text2": ["Cooldown", "blink"],
      "desc": "Flash the temperature reading after heating was halted while the tip is still hot"
    },
    "TemperatureCalibration": {
      "text2": ["Calibrate", "temperature?"],
      "desc": "Start tip temperature offset calibration"
    },
    "SettingsReset": {
      "text2": ["Factory", "reset?"],
      "desc": "Reset settings to default"
    },
    "VoltageCalibration": {
      "text2": ["Calibrate", "input voltage?"],
      "desc": "Start VIN calibration (long press to exit)"
    },
    "AdvancedSoldering": {
      "text2": ["Detailed", "solder screen"],
      "desc": "Display detailed information in a smaller font on soldering screen"
    },
    "ScrollingSpeed": {
      "text2": ["Scrolling", "speed"],
      "desc": "Speed info text scrolls past at (S=slow | F=fast)"
    },
    "QCMaxVoltage": {
      "text2": ["QC", "voltage"],
      "desc": "Max QC voltage the iron should negotiate for"
    },
    "PDNegTimeout": {
      "text2": ["PD", "timeout"],
      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
    },
    "PowerLimit": {
      "text2": ["Power", "limit"],
      "desc": "Maximum power the iron can use (W=watt)"
    },
    "ReverseButtonTempChange": {
      "text2": ["Reverse", "+ - keys"],
      "desc": "Reverse assignment of temperature adjustment buttons"
    },
    "TempChangeShortStep": {
      "text2": ["Temp change", "short"],
      "desc": "Temperature change increment on short button press"
    },
    "TempChangeLongStep": {
      "text2": ["Temp change", "long"],
      "desc": "Temperature change increment on long button press"
    },
    "PowerPulsePower": {
      "text2": ["Power", "pulse"],
      "desc": "Intensity of power of keep-awake-pulse (watt)"
    },
    "HallEffSensitivity": {
      "text2": ["Hall sensor", "sensitivity"],
      "desc": "Sensitivity of the Hall effect sensor to detect sleep (O=off | L=low | M=medium | H=high)"
    },
    "LockingMode": {
      "text2": ["Allow locking", "buttons"],
      "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
    },
    "MinVolCell": {
      "text2": ["Minimum", "voltage"],
      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
    },
    "AnimLoop": {
      "text2": ["Anim.", "loop"],
      "desc": "Loop icon animations in main menu"
    },
    "AnimSpeed": {
      "text2": ["Anim.", "speed"],
      "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
    },
    "PowerPulseWait": {
      "text2": ["Power pulse", "delay"],
      "desc": "Delay before keep-awake pulse is triggered (x 2.5s)"
    },
    "PowerPulseDuration": {
      "text2": ["Power pulse", "duration"],
      "desc": "Keep-awake-pulse duration (x 250ms)"
    },
    "LanguageSwitch": {
      "text2": ["Language:", " EN     English"],
      "desc": "Current firmware language"
    },
    "Brightness": {
      "text2": ["Screen", "contrast"],
      "desc": "Adjust the brightness of the OLED screen"
    },
    "ColourInversion": {
      "text2": ["Invert", "screen"],
      "desc": "Invert the colours of the OLED screen"
    }
  }
}