{
	"languageCode": "DA",
	"languageLocalName": "Dansk",
	"fonts": [
		"ascii_basic",
		"latin_extended"
	],
	"messages": {
		"SettingsCalibrationDone": "Calibration done!",
		"SettingsCalibrationWarning": "Sørg for at loddespidsen er ved stuetemperatur, inden du fortsætter!",
		"SettingsResetWarning": "Are you sure to reset settings to default values?",
		"UVLOWarningString": "Lav Volt",
		"UndervoltageString": "Undervoltage",
		"InputVoltageString": "Input V: ",
		"WarningTipTempString": "Tip Temp: ",
		"BadTipString": "BAD TIP",
		"SleepingSimpleString": "Zzzz",
		"SleepingAdvancedString": "Dvale...",
		"WarningSimpleString": "Varm",
		"WarningAdvancedString": "VARM LODDESPIDS!",
		"SleepingTipAdvancedString": "Tip:",
		"IdleTipString": "Tip:",
		"IdleSetString": " Set:",
		"TipDisconnectedString": "TIP DISCONNECTED",
		"SolderingAdvancedPowerPrompt": "Power: ",
		"OffString": "Off",
		"YourGainMessage": "Your gain:"
	},
	"messagesWarn": {
		"ResetOKMessage": "Reset OK",
		"SettingsResetMessage": [
			"Settings were",
			"reset!"
		],
		"NoAccelerometerMessage": [
			"No accelerometer",
			"detected!"
		],
		"NoPowerDeliveryMessage": [
			"No USB-PD IC",
			"detected!"
		],
		"LockingKeysString": " LOCKED",
		"UnlockingKeysString": "UNLOCKED",
		"WarningKeysLockedString": "!LOCKED!"
	},
	"characters": {
		"SettingRightChar": "H",
		"SettingLeftChar": "V",
		"SettingAutoChar": "A",
		"SettingFastChar": "F",
		"SettingSlowChar": "S",
		"SettingMediumChar": "M",
		"SettingOffChar": "O",
		"SettingStartSolderingChar": "L",
		"SettingStartSleepChar": "D",
		"SettingStartSleepOffChar": "O",
		"SettingStartNoneChar": "S",
		"SettingSensitivityOff": "O",
		"SettingSensitivityLow": "L",
		"SettingSensitivityMedium": "M",
		"SettingSensitivityHigh": "H",
		"SettingLockDisableChar": "D",
		"SettingLockBoostChar": "B",
		"SettingLockFullChar": "F",
		"SettingNAChar": "N/A"
	},
	"menuGroups": {
		"PowerMenu": {
			"text2": [
				"Power",
				"settings"
			],
			"desc": "Power settings"
		},
		"SolderingMenu": {
			"text2": [
				"Soldering",
				"Settings"
			],
			"desc": "Soldering settings"
		},
		"PowerSavingMenu": {
			"text2": [
				"Sleep",
				"Modes"
			],
			"desc": "Power Saving Settings"
		},
		"UIMenu": {
			"text2": [
				"User",
				"Interface"
			],
			"desc": "User Interface settings"
		},
		"AdvancedMenu": {
			"text2": [
				"Advanced",
				"Options"
			],
			"desc": "Advanced options"
		}
	},
	"menuOptions": {
		"DCInCutoff": {
			"text2": [
				"Power",
				"source"
			],
			"desc": "Strømforsyning. Indstil Cutoff Spændingen. <DC 10V <S 3.3V per cell"
		},
		"SleepTemperature": {
			"text2": [
				"Sleep",
				"temp"
			],
			"desc": "Dvale Temperatur <C>"
		},
		"SleepTimeout": {
			"text2": [
				"Sleep",
				"timeout"
			],
			"desc": "Dvale Timeout <Minutter/Sekunder"
		},
		"ShutdownTimeout": {
			"text2": [
				"Shutdown",
				"timeout"
			],
			"desc": "sluknings Timeout <Minutter"
		},
		"MotionSensitivity": {
			"text2": [
				"Motion",
				"sensitivity"
			],
			"desc": "Bevægelsesfølsomhed <0.Slukket 1.Mindst følsom 9.Mest følsom"
		},
		"TemperatureUnit": {
			"text2": [
				"Temperature",
				"unit"
			],
			"desc": "Temperatur Enhed <C=Celsius F=Fahrenheit"
		},
		"AdvancedIdle": {
			"text2": [
				"Detailed",
				"idle screen"
			],
			"desc": "Vis detialieret information med en mindre skriftstørrelse på standby skærmen."
		},
		"DisplayRotation": {
			"text2": [
				"Display",
				"orientation"
			],
			"desc": "Skærm Orientering <A. Automatisk V. Venstre Håndet H. Højre Håndet"
		},
		"BoostTemperature": {
			"text2": [
				"Boost",
				"temp"
			],
			"desc": "Temperatur i \"boost\" mode"
		},
		"AutoStart": {
			"text2": [
				"Auto",
				"start"
			],
			"desc": "Start automatisk med lodning når strøm sættes til. L=Lodning, D= Dvale tilstand,S=Slukket"
		},
		"CooldownBlink": {
			"text2": [
				"Cooldown",
				"blink"
			],
			"desc": "Blink temperaturen på skærmen, mens spidsen stadig er varm."
		},
		"TemperatureCalibration": {
			"text2": [
				"Calibrate",
				"temperature?"
			],
			"desc": "kalibrere spids temperatur."
		},
		"SettingsReset": {
			"text2": [
				"Factory",
				"Reset?"
			],
			"desc": "Gendan alle indstillinger"
		},
		"VoltageCalibration": {
			"text2": [
				"Calibrate",
				"input voltage?"
			],
			"desc": "VIN kalibrering. Knapperne justere, Lang tryk for at gå ud"
		},
		"AdvancedSoldering": {
			"text2": [
				"Detailed",
				"solder screen"
			],
			"desc": "Vis detialieret information mens der loddes"
		},
		"ScrollingSpeed": {
			"text2": [
				"Scrolling",
				"speed"
			],
			"desc": "Speed this text scrolls past at"
		},
		"QCMaxVoltage": {
			"text2": [
				"Power",
				"Wattage"
			],
			"desc": "Power Wattage of the power adapter used"
		},
		"PowerLimit": {
			"text2": [
				"Power",
				"Limit"
			],
			"desc": "Maximum power the iron can use <Watts>"
		},
		"ReverseButtonTempChange": {
			"text2": [
				"Key +-",
				"reverse?"
			],
			"desc": "Reverse the tip temperature change buttons plus minus assignment."
		},
		"TempChangeShortStep": {
			"text2": [
				"Temp change",
				"short?"
			],
			"desc": "Temperature change steps on short button press!"
		},
		"TempChangeLongStep": {
			"text2": [
				"Temp change",
				"long?"
			],
			"desc": "Temperature change steps on long button press!"
		},
		"PowerPulsePower": {
			"text2": [
				"Power",
				"Pulse W"
			],
			"desc": "Keep awake pulse power intensity"
		},
		"HallEffSensitivity": {
			"text2": [
				"Hall Eff",
				"Sensitivity"
			],
			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
		},
		"LockingMode": {
			"text2": [
				"Allow buttons",
				"locking"
			],
			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
		},
		"MinVolCell": {
			"text2": [
				"Minimum",
				"voltage"
			],
			"desc": "Minimum allowed voltage per cell <Volts> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
		},
		"AnimLoop": {
			"text2": [
				"Anim.",
				"loop"
			],
			"desc": "Loop icon animations in root menu"
		},
		"AnimSpeed": {
			"text2": [
				"Anim.",
				"speed"
			],
			"desc": "Speed of icon animations in menu <O=off | L=low | M=medium | H=high>"
		},
		"PowerPulseWait": {
			"text2": [
				"Power pulse",
				"wait time"
			],
			"desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
		},
		"PowerPulseDuration": {
			"text2": [
				"Power pulse",
				"duration"
			],
			"desc": "Keep-awake-pulse duration (x 250ms)"
		},
		"LanguageSwitch": {
			"text2": [
				"Language:",
				" DA       Dansk"
			],
			"desc": ""
		}
	}
}