{
  "languageCode": "NO",
  "languageLocalName": "Norsk",
  "fonts": ["ascii_basic", "latin_extended"],
  "messages": {
    "SettingsCalibrationDone": "Calibration done!",
    "SettingsCalibrationWarning": "Sørg for at loddespissen har romtemperatur før du fortsetter!",
    "SettingsResetWarning": "Er du sikker på at du vil tilbakestille til standardinnstillinger?",
    "UVLOWarningString": "Lavspenn",
    "UndervoltageString": "Underspenning",
    "InputVoltageString": "Innspenn.: ",
    "WarningTipTempString": "Spisstemp: ",
    "BadTipString": "BAD TIP",
    "SleepingSimpleString": "Zzzz",
    "SleepingAdvancedString": "Dvale...",
    "WarningSimpleString": "Varm",
    "WarningAdvancedString": "VARM SPISS!",
    "SleepingTipAdvancedString": "Spiss:",
    "IdleTipString": "Spiss:",
    "IdleSetString": "Set:",
    "TipDisconnectedString": "SPISS FRAKOBLET",
    "SolderingAdvancedPowerPrompt": "Effekt: ",
    "OffString": "Av",
    "YourGainMessage": "Your gain:"
  },
  "messagesWarn": {
    "ResetOKMessage": "Reset OK",
    "SettingsResetMessage": ["Settings were", "reset!"],
    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
    "LockingKeysString": " LOCKED",
    "UnlockingKeysString": "UNLOCKED",
    "WarningKeysLockedString": "!LOCKED!",
    "WarningThermalRunaway": ["Thermal", "Runaway"]
  },
  "characters": {
    "SettingRightChar": "H",
    "SettingLeftChar": "V",
    "SettingAutoChar": "A",
    "SettingOffChar": "O",
    "SettingSlowChar": "L",
    "SettingMediumChar": "M",
    "SettingFastChar": "H",
    "SettingStartNoneChar": "I",
    "SettingStartSolderingChar": "L",
    "SettingStartSleepChar": "D",
    "SettingStartSleepOffChar": "R",
    "SettingSensitivityOff": "O",
    "SettingSensitivityLow": "L",
    "SettingSensitivityMedium": "M",
    "SettingSensitivityHigh": "H",
    "SettingLockDisableChar": "D",
    "SettingLockBoostChar": "B",
    "SettingLockFullChar": "F",
    "SettingNAChar": "N/A"
  },
  "menuGroups": {
    "PowerMenu": {
      "text2": ["Power", "settings"],
      "desc": "Power settings"
    },
    "SolderingMenu": {
      "text2": ["Lodde-", "innst."],
      "desc": "Loddeinnstillinger"
    },
    "PowerSavingMenu": {
      "text2": ["Dvale-", "innst."],
      "desc": "Dvaleinnstillinger"
    },
    "UIMenu": {
      "text2": ["Bruker-", "grensesn."],
      "desc": "Brukergrensesnitt-innstillinger"
    },
    "AdvancedMenu": {
      "text2": ["Avanserte", "valg"],
      "desc": "Avanserte valg"
    }
  },
  "menuOptions": {
    "DCInCutoff": {
      "text2": ["Kilde", ""],
      "desc": "Strømforsyning. Sett nedre spenning for automatisk nedstenging. (DC 10V) (S 3.3V per celle)"
    },
    "SleepTemperature": {
      "text2": ["DTmp", ""],
      "desc": "Dvaletemperatur (C)"
    },
    "SleepTimeout": {
      "text2": ["DTid", ""],
      "desc": "Tid før dvale (Minutter | Sekunder)"
    },
    "ShutdownTimeout": {
      "text2": ["AvTid", ""],
      "desc": "Tid før automatisk nedstenging (Minutter)"
    },
    "MotionSensitivity": {
      "text2": ["BSensr", ""],
      "desc": "Bevegelsesfølsomhet (0=Inaktiv | 1=Minst følsom | ... | 9=Mest følsom)"
    },
    "TemperatureUnit": {
      "text2": ["TmpEnh", ""],
      "desc": "Temperaturskala (C=Celsius | F=Fahrenheit)"
    },
    "AdvancedIdle": {
      "text2": ["AvDvSk", ""],
      "desc": "Vis detaljert informasjon med liten skrift på dvaleskjermen."
    },
    "DisplayRotation": {
      "text2": ["SkRetn", ""],
      "desc": "Skjermretning (H=Høyrehendt | V=Venstrehendt | A=Automatisk)"
    },
    "BoostTemperature": {
      "text2": ["KTmp", ""],
      "desc": "Temperatur i \"kraft\"-modus"
    },
    "AutoStart": {
      "text2": ["AStart", ""],
      "desc": "Start automatisk med lodding når strøm kobles til. (I=Inaktiv | L=Lodding | D=Dvale | R=Dvale romtemperatur)"
    },
    "CooldownBlink": {
      "text2": ["KjBlnk", ""],
      "desc": "Blink temperaturen på skjermen mens spissen fortsatt er varm."
    },
    "TemperatureCalibration": {
      "text2": ["TempKal?", ""],
      "desc": "Kalibrer spiss-temperatur."
    },
    "SettingsReset": {
      "text2": ["TilbStl?", ""],
      "desc": "Tilbakestill alle innstillinger"
    },
    "VoltageCalibration": {
      "text2": ["KalSpIn?", ""],
      "desc": "Kalibrer spenning. Knappene justerer. Langt trykk for å gå ut"
    },
    "AdvancedSoldering": {
      "text2": ["AvLdSk", ""],
      "desc": "Vis detaljert informasjon ved lodding"
    },
    "ScrollingSpeed": {
      "text2": ["RullHa", ""],
      "desc": "Hastigheten på rulletekst"
    },
    "QCMaxVoltage": {
      "text2": ["Power", "Wattage"],
      "desc": "Power Wattage of the power adapter used"
    },
    "PDNegTimeout": {
      "text2": ["PD", "timeout"],
      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
    },
    "PowerLimit": {
      "text2": ["Power", "Limit"],
      "desc": "Maximum power the iron can use (Watts)"
    },
    "ReverseButtonTempChange": {
      "text2": ["Key +-", "reverse?"],
      "desc": "Reverse the tip temperature change buttons plus minus assignment."
    },
    "TempChangeShortStep": {
      "text2": ["Temp change", "short?"],
      "desc": "Temperature change steps on short button press!"
    },
    "TempChangeLongStep": {
      "text2": ["Temp change", "long?"],
      "desc": "Temperature change steps on long button press!"
    },
    "PowerPulsePower": {
      "text2": ["Power", "Pulse W"],
      "desc": "Keep awake pulse power intensity"
    },
    "HallEffSensitivity": {
      "text2": ["Hall Eff", "Sensitivity"],
      "desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
    },
    "LockingMode": {
      "text2": ["Allow buttons", "locking"],
      "desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
    },
    "MinVolCell": {
      "text2": ["Minimum", "voltage"],
      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
    },
    "AnimLoop": {
      "text2": ["Anim.", "loop"],
      "desc": "Loop icon animations in root menu"
    },
    "AnimSpeed": {
      "text2": ["Anim.", "speed"],
      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
    },
    "PowerPulseWait": {
      "text2": ["Power pulse", "wait time"],
      "desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
    },
    "PowerPulseDuration": {
      "text2": ["Power pulse", "duration"],
      "desc": "Keep-awake-pulse duration (x 250ms)"
    },
    "LanguageSwitch": {
      "text2": ["Språk:", " NO       Norsk"],
      "desc": ""
    },
    "Brightness": {
      "text2": ["Screen", "Brightness"],
      "desc": "Adjust the contrast/brightness of the OLED screen"
    },
    "ColourInversion": {
      "text2": ["Screen", "Invert"],
      "desc": "Invert the colours of the OLED screen"
    }
  }
}