{
  "languageCode": "NL_BE",
  "languageLocalName": "Vlaams",
  "fonts": ["ascii_basic", "latin_extended"],
  "messages": {
    "SettingsCalibrationDone": "Gecalibreerd!",
    "SettingsCalibrationWarning": "Zorg vooraf dat de punt op kamertemperatuur is!",
    "SettingsResetWarning": "Ben je zeker dat je alle standaardwaarden wil resetten?",
    "UVLOWarningString": "Voedingsspanning LAAG",
    "UndervoltageString": "Onderspanning",
    "InputVoltageString": "Voedingsspanning: ",
    "WarningTipTempString": "Punt Temp: ",
    "BadTipString": "DEFECT",
    "SleepingSimpleString": "Zzz ",
    "SleepingAdvancedString": "Slaapstand...",
    "WarningSimpleString": "HEET",
    "WarningAdvancedString": "!!! PUNT HEET !!!",
    "SleepingTipAdvancedString": "Punt:",
    "IdleTipString": "Punt:",
    "IdleSetString": "Stel in:",
    "TipDisconnectedString": "Punt ONTKOPPELD",
    "SolderingAdvancedPowerPrompt": "Vermogen: ",
    "OffString": "Uit",
    "YourGainMessage": "Your gain:"
  },
  "messagesWarn": {
    "ResetOKMessage": "Reset OK",
    "SettingsResetMessage": ["Settings were", "reset!"],
    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
    "LockingKeysString": " LOCKED",
    "UnlockingKeysString": "UNLOCKED",
    "WarningKeysLockedString": "!LOCKED!",
    "WarningThermalRunaway": ["Thermal", "Runaway"]
  },
  "characters": {
    "SettingRightChar": "R",
    "SettingLeftChar": "L",
    "SettingAutoChar": "A",
    "SettingOffChar": "O",
    "SettingSlowChar": "T",
    "SettingMediumChar": "M",
    "SettingFastChar": "S",
    "SettingStartNoneChar": "F",
    "SettingStartSolderingChar": "T",
    "SettingStartSleepChar": "S",
    "SettingStartSleepOffChar": "K",
    "SettingSensitivityOff": "O",
    "SettingSensitivityLow": "L",
    "SettingSensitivityMedium": "M",
    "SettingSensitivityHigh": "H",
    "SettingLockDisableChar": "D",
    "SettingLockBoostChar": "B",
    "SettingLockFullChar": "F",
    "SettingNAChar": "N/A"
  },
  "menuGroups": {
    "PowerMenu": {
      "text2": ["Power", "settings"],
      "desc": "Power settings"
    },
    "SolderingMenu": {
      "text2": ["Soldeer", "Instellingen"],
      "desc": "Soldeerinstellingen"
    },
    "PowerSavingMenu": {
      "text2": ["Slaap", "standen"],
      "desc": "Batterijspaarstanden"
    },
    "UIMenu": {
      "text2": ["Gebruikers-", "Interface"],
      "desc": "Gebruikersinterface Instellingen"
    },
    "AdvancedMenu": {
      "text2": ["Gevorderde", "Instellingen"],
      "desc": "Gevorderde Instellingen"
    }
  },
  "menuOptions": {
    "DCInCutoff": {
      "text2": ["Spannings-", "bron"],
      "desc": "Spanningsbron. Stelt minimumspanning in. (DC 10V) (S 3.3V per cel)"
    },
    "SleepTemperature": {
      "text2": ["Slaap", "temp"],
      "desc": "Temperatuur in slaapstand (°C)"
    },
    "SleepTimeout": {
      "text2": ["Slaap", "time-out"],
      "desc": "Slaapstand time-out (Minuten | Seconden)"
    },
    "ShutdownTimeout": {
      "text2": ["Uitschakel", "time-out"],
      "desc": "Automatisch afsluiten time-out (Minuten)"
    },
    "MotionSensitivity": {
      "text2": ["Bewegings-", "gevoeligheid"],
      "desc": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
    },
    "TemperatureUnit": {
      "text2": ["Temperatuur", "schaal"],
      "desc": "Temperatuurschaal (°C=Celsius | °F=Fahrenheit)"
    },
    "AdvancedIdle": {
      "text2": ["Gedetailleerd", "slaapscherm"],
      "desc": "Gedetailleerde informatie in een kleiner lettertype in het slaapscherm."
    },
    "DisplayRotation": {
      "text2": ["Scherm-", "oriëntatie"],
      "desc": "Schermoriëntatie (R=Rechtshandig | L=Linkshandig | A=Automatisch)"
    },
    "BoostTemperature": {
      "text2": ["Verhogings", "temp"],
      "desc": "Verhogingstemperatuur"
    },
    "AutoStart": {
      "text2": ["Auto", "start"],
      "desc": "Breng de soldeerbout op temperatuur bij het opstarten. (F=Uit | T=Soldeertemperatuur | S=Slaapstand-temperatuur | K=Slaapstand kamertemperatuur)"
    },
    "CooldownBlink": {
      "text2": ["Afkoel", "knipper"],
      "desc": "Temperatuur knippert in hoofdmenu tijdens afkoeling."
    },
    "TemperatureCalibration": {
      "text2": ["Calibreer", "temperatuur?"],
      "desc": "Temperatuur van de punt calibreren."
    },
    "SettingsReset": {
      "text2": ["Instellingen", "resetten?"],
      "desc": "Alle instellingen resetten."
    },
    "VoltageCalibration": {
      "text2": ["Calibreer", "voedingsspanning?"],
      "desc": "VIN Calibreren. Bevestigen door knoppen lang in te drukken."
    },
    "AdvancedSoldering": {
      "text2": ["Gedetailleerd", "soldeerscherm"],
      "desc": "Gedetailleerde informatie in kleiner lettertype in soldeerscherm."
    },
    "ScrollingSpeed": {
      "text2": ["Scrol", "snelheid"],
      "desc": "Scrolsnelheid van de tekst."
    },
    "QCMaxVoltage": {
      "text2": ["Vermogen", "Watt"],
      "desc": "Vermogen van de adapter"
    },
    "PDNegTimeout": {
      "text2": ["PD", "timeout"],
      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
    },
    "PowerLimit": {
      "text2": ["Power", "Limit"],
      "desc": "Maximum power the iron can use (Watts)"
    },
    "ReverseButtonTempChange": {
      "text2": ["Key +-", "reverse?"],
      "desc": "Reverse the tip temperature change buttons plus minus assignment."
    },
    "TempChangeShortStep": {
      "text2": ["Temp change", "short?"],
      "desc": "Temperature change steps on short button press!"
    },
    "TempChangeLongStep": {
      "text2": ["Temp change", "long?"],
      "desc": "Temperature change steps on long button press!"
    },
    "PowerPulsePower": {
      "text2": ["Power", "Pulse W"],
      "desc": "Keep awake pulse power intensity"
    },
    "HallEffSensitivity": {
      "text2": ["Hall Eff", "Sensitivity"],
      "desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
    },
    "LockingMode": {
      "text2": ["Allow buttons", "locking"],
      "desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
    },
    "MinVolCell": {
      "text2": ["Minimum", "voltage"],
      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
    },
    "AnimLoop": {
      "text2": ["Anim.", "loop"],
      "desc": "Loop icon animations in root menu"
    },
    "AnimSpeed": {
      "text2": ["Anim.", "speed"],
      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
    },
    "PowerPulseWait": {
      "text2": ["Power pulse", "wait time"],
      "desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
    },
    "PowerPulseDuration": {
      "text2": ["Power pulse", "duration"],
      "desc": "Keep-awake-pulse duration (x 250ms)"
    },
    "LanguageSwitch": {
      "text2": ["Spraak:", " NL_BE   Vlaams"],
      "desc": ""
    },
    "Brightness": {
      "text2": ["Screen", "Brightness"],
      "desc": "Adjust the contrast/brightness of the OLED screen"
    },
    "ColourInversion": {
      "text2": ["Screen", "Invert"],
      "desc": "Invert the colours of the OLED screen"
    }
  }
}