/*
 * Settings.c
 *
 *  Created on: 29 Sep 2016
 *      Author: Ralim
 *
 *      This file holds the users settings and saves / restores them to the devices flash
 */

#include "Settings.h"
#define FLASH_ADDR 		(0x8000000|0xBC00)/*Flash start OR'ed with the maximum amount of flash - 1024 bytes*/

systemSettingsType systemSettings;

void saveSettings() {
	//First we erase the flash
	FLASH_EraseInitTypeDef pEraseInit;
	pEraseInit.TypeErase = FLASH_TYPEERASE_PAGES;
	pEraseInit.Banks = FLASH_BANK_1;
	pEraseInit.NbPages = 1;
	pEraseInit.PageAddress = FLASH_ADDR;
	uint32_t failingAddress = 0;
	HAL_FLASH_Unlock();
	HAL_FLASHEx_Erase(&pEraseInit, &failingAddress);
	//^ Erase the page of flash (1024 bytes on this platform)
	//erased the chunk
	//now we program it
	uint16_t *data = (uint16_t*) &systemSettings;
	for (uint8_t i = 0; i < (sizeof(systemSettings) / 2); i++) {
		HAL_FLASH_Program(FLASH_TYPEPROGRAM_HALFWORD, FLASH_ADDR + (i * 2), data[i]);
	}
}

void restoreSettings() {
	//We read the flash
	uint16_t *data = (uint16_t*) &systemSettings;
	for (uint8_t i = 0; i < (sizeof(systemSettings) / 2); i++) {
		data[i] = *(uint16_t *) (FLASH_ADDR + (i * 2));
	}
	//if the version is correct were done
	//if not we reset and save
	if (systemSettings.version != SETTINGSVERSION) {
		//probably not setup
		resetSettings();
	}

}
//Lookup function for cutoff setting -> X10 voltage
/*
 * 0=DC
 * 1=3S
 * 2=4S
 * 3=5S
 * 4=6S
 */
uint8_t lookupVoltageLevel(uint8_t level) {
	if (level == 0)
		return 100;    //10V since iron does not function effectively below this
	else
		return (level * 33) + (33 * 2);
}
void resetSettings() {

	systemSettings.SleepTemp = 150;    //Temperature the iron sleeps at - default 150.0 C
	systemSettings.SleepTime = 6;    //How many seconds/minutes we wait until going to sleep - default 1 min
	systemSettings.SolderingTemp = 320;    //Default soldering temp is 320.0 C
	systemSettings.cutoutSetting = 0;			//default to no cut-off voltage
	systemSettings.version = SETTINGSVERSION;			//Store the version number to allow for easier upgrades
	systemSettings.advancedScreens = 1;			//Do we show detailed screens?
	systemSettings.OrientationMode = 2;				//Default to automatic
	systemSettings.sensitivity = 8;				//Default high sensitivity
	systemSettings.voltageDiv = 144;			//Default divider from schematic
	systemSettings.ShutdownTime = 30;			//How many minutes until the unit turns itself off
	systemSettings.boostModeEnabled = 0;		//Default to safe, with no boost mode
	systemSettings.BoostTemp = 420;				//default to 400C
	systemSettings.powerDisplay = 0;		//default to power display being off
	systemSettings.autoStartMode = 0;				//Auto start off for safety
	systemSettings.coolingTempBlink = 0;				//Blink the temperature on the cooling screen when its > 50C
	saveSettings();
}