* Minor doc updates
* pydoc
* Draft tip selection menu
* Start linking in manual tip resistance
* Enable on Pinecilv1 / TS10x
* Fixup drawing tip type
* Update Settings.cpp
* Rename JBC type
* Add translations
* Handle one tip type
* Refactor header includes
* Fixup translation_IT.json
* Fixing up includes
* Format
* Apply suggestions from code review
Co-authored-by: discip <53649486+discip@users.noreply.github.com>
* Update Documentation/Hardware.md
Co-authored-by: discip <53649486+discip@users.noreply.github.com>
---------
Co-authored-by: = <=>
Co-authored-by: discip <53649486+discip@users.noreply.github.com>
* Add T55 to build
* Approx in T55
* Update ThermoModel.cpp
* use PT1000 lookup logic
* Handle no accelerometer
* Setup for temp reading
* Lock max temp
* No movement pin
* Compensate for heater coil resistance change
* Fix min offset for T55
* Fixup font for T55
* Update draw_profile_advanced.cpp
* Update draw_temperature_change.cpp
---------
Co-authored-by: discip <53649486+discip@users.noreply.github.com>
* Create README.md
* Move to new folder
* Migrating
* Migrate Remainder
* format fix (all but one) (#1889)
* Update USBPDDebug_FS2711.cpp
* Delete PrintVoltage.cpp
* Copy in 128x32 template
* Mask drawing for 96x16
* Import #1819
* Update Font.h
* Homescreen
* Update draw_homescreen_detailed.cpp
* Fix oled normal draw for variable height
* Update OLED.cpp
* Draw settings icons
* Update draw_homescreen_simplified.cpp
* Update draw_power_source_icon.cpp
* Fixup oled drawing for fill area
* Update the region fill for mixed heights
* Fix newline height
* FIXUP! Draw icons in settings menu at correct size
* Fix scrollbar
* Update settingsGUI.cpp
* S60(P) Disable auto display rotation
* On tall oled, scroll in 2 line increments
* Bugfix transition L<->R
@discip I take it back, there was a bug :)
* Draw every other one on transitions
* .
* cleanup
* Bootup logo: Draw in centre
* Update OLED.hpp
---------
Co-authored-by: discip <53649486+discip@users.noreply.github.com>
* Basic Init
* Rought implementation of fs2711 usb pd interface
* Rought implementation of fs2711 usb pd interface
* Still needs work overcurrent protection keeps getting tripped
* New pdo selection logic
* Update push.yml
* Update push.yml
* Update push.yml
* Update Makefile
* Adds PPS
* Removed unused define
* Adds PPS
* Apply suggestions from code review
Co-authored-by: Ben V. Brown <5425387+Ralim@users.noreply.github.com>
* Code review changes
* Added osDelay include
* New line alignment for S60 softwarei2c
* Code review
* Fixes code review stuff
* code review changes
* Change voltage limit to 20 as that's what the device is rated for
* Shortened wait time for usb pd
* Fixed issues that cuase S60P to restart constantly
* fixing minimal OLED brightness
With the current settings, the OLED turns off if the first level is selected.
* Adds protocol to s60p debug menu
* loosened fs2711 protocol selection timing
* Adds PDO register reading to negotiation logic
* Fixes FS2711 timeout issue and cleans up driver
* Adds FS2711 protocol negotiation to power loop
* Removed uneeded define
* Reverts changes to Font.h and adds clang-format comments
---------
Co-authored-by: Ben V. Brown <Ralim@Ralimtek.com>
Co-authored-by: discip <53649486+discip@users.noreply.github.com>
Co-authored-by: Ben V. Brown <5425387+Ralim@users.noreply.github.com>
* Starting GUI render refactor to be more immediate mode
Update TemperatureAdjust.cpp
.
Cleanup Soldering
Sleep
SolderingProfiles
Soldering Rework
Rough pass GUI
Temp Adjust
Cleanup old OperatingMode
Debug Menu
* Update TemperatureAdjust.cpp
* Roughing some transition work
* Fixup! Hook in the init starter helper
* Better home screen button handler
* FIXUP! Fix typo's
.
* Update SettingsMenu.cpp
* More settings rework
* More settings rendering
* Fixup
* Transitions
Update SolderingProfile.cpp
Hook in transistions
* Update TemperatureAdjust.cpp
* Update push.yml
* Add auto-repeat to settings menu
* Miniware: Use IT for I2C writes
* Update USBPDDebug_HUSB238.cpp
* Force write screen on side animation cancel
.
* Refactor moving down the settings list
* Update settingsGUI.cpp
* Update I2C_Wrapper.cpp
* Update OLED.cpp
* Rework button handling
* Fix PD debug at boot
* Fixup not showing right menu options
* silence some warnings
* Style cleanup
* Fkit use bit-bang I2C for Miniware
* Update GUIRendering.md
* Fixup transition on enter soldering mode
* Save Settings
* Fixes for some animations not running
Dont bail on animations if keypress is still held
* Fixup settings acceleration
* OLED Up animation
* Link up/down on debug meny
* Make all accelerometers I2C bus aware
Update accelerometers_common.h
* Make I2C mag optional
* Miniware -> Only Bit-Bang I2C
* Fixup for scrollbar
FIXUP! Debug menu returns to home screen
FIXUP! Up oled animation
Fix temp exit
* Settings menu -> Both buttons return a menu layer
* Merge fixup
* Update BMA223.cpp
* Re-Enable OLED sleep
* Save Setting on temp adjust exit
* WiP on startup mode
* Some autostart working
* Add hibernation mode & more autostart fixes
* If cant CJC; go to startup
* Hibernate in sleep
* Cleanup scroll indicator
* FIXUP! Ensure startup warnings are linked in
* FIXUP! Ensure we render out temp change before timing out
* Ensure 100ms delay between CJC samples
* Fix not re-calculating menu length on entering menu
* Implement NegotiationinProgress for USB-PD
* Mask heating until PD finishes negotiation
* Fixup staying in hibernate correctly
* Warning timeout
* Show reset settings warning
* Correctly compensate help text start time
* Update GUIThread.cpp
* Update USBPD.cpp
* .
* Fixup sleep time
* Update printSleepCountdown.cpp
* replacing countdown with big plus while in boost mode
* bringing back the + 1 since it was missing when not in boost mode
* Bail on USB-PD check after 3 seconds incase of DC source
* Fix hibernate
* Update PIDThread.cpp
* did center plus symbol (boost mode)
* Big refactor to not make settings increment handler handle the "is last item" return
* Fixup boot logo
* Fix flashing
* Fixup recalculate the menu length on long hold
* Fixup missing menu entries
* Fix junk left on screen after user confirmation
* Re-order button handler to use custom, then default order to allow setting associated setting
* Attach setting for settings using custom handler
* Fix swap +/- keys
* Fix boost temp
* Implement last menu option for Language selector
* Wait for init before CJC runs
* Check last setting via increment value
* Update BSP.cpp
* removed = from >=
Otherwise incrementing would stop and the scroll bar would already flash at the second to last value.
* (Hacky) Fix for Settings reset
---------
Co-authored-by: discip <53649486+discip@users.noreply.github.com>
* Draft cleanup of the folder definition mess
* Move old startup
* Fixup! broken hacky includes
* Update Makefile
* Update Makefile
* Update Makefile
* Bulk format
* Who knew, header guards are a wise idea
* Squash some sizing warnings
* Drop broken usb stack
* Fix BLE headers to be sensible
* Cleaning up proper c styling
* We have newer clang, it does bracketing now
* Run clang-format brackets
* We can drop the old messy bracket-checker with newer clang format
* WiP formatter
* Align grids of scripts by right side
Massively easier to read in nearly all cases
* Excempt the table for compression from formatter
* MHP30 move to I2C Bit Banging
* Fixup Accelerometer drivers so all can use I2CBB
* No STM32 I2C driver anymore
* TS100 on I2CBB
* Miniware on BB
* Fixup S60 build
* format
format
* Start PWM after adc irq fully done
* Filter len 4
* Use comparitor 2 on timer for wrap around
* Update IRQ.cpp
* Tip measurements are uint16_t
Update BSP.cpp
Update BSP.cpp
* WiP PID
move pid tuning to config
Update PIDThread.cpp
* Handle PWM Timer gitchy comparitor
* Tuning
* Dampen with Kd
* Cleaning up
* Use TemperatureType_t for getTipTemp()
* Add small rolling average to user GUI temp to reduce flicker
* Trigger PID when adc is skipped (will use old values)
* Create a typedef for temperatures
* Quick parse replace temp types
* Fixup for fast/slow PWM on PinecilV2
* Update PIDThread.cpp
* Pinecil small tips need less smoothing
* Remove incorrect comment
* Remove unused function
* Update PinecilV2 Tune as well
* Use 3 count filter for MHP30 acceleromter
Requires it to trip 3 times in a row to fire. So really only knocking the unit over trips it off.
* Reset shutdown timer forwards on shutdown timeout
Default shutdown mode off
---------
Co-authored-by: discip <53649486+discip@users.noreply.github.com>
* Testing clang-format style check using github CI
* github/push: implement check-style for clang-format as a separate build step
* github/push: add missing packages for check-style/clang-format build step
* source/Makefile: check-style - reduce files of interest; update .clang-format to keep enums init
* source/Makefile: empty lines, spaces & tabs refactoring to unify style - part 1 out of N
* source/Makefile: fix formatting for multi-line variables
* source/Makefile: update formatting for multi-line variables
* source/Makefile: remove spaces on vars assignments to unify style
* source/Makefile: remove unused target style
* source/Makefile: implement exclude vars for clang-format related files
* source/Makefile: exclude configuration.h from clang-format check
* Dockerfile: add diffutils in a container to make check-style target using advanced version of diff to get more advanced output to parse & navigate log more easily
* source/Makefile: implement parser for clang-format inside check-style target to make output compatible with gcc-like error compilation format for compatibility with IDEs/editors for easy navigation over files to fix style errors
* source/Makefile: probably final touches on unifying style
* source/Makefile: implement check-style-list target to only list affected file names with wrong code style for debug purposes
* source/Makefile: fix missed spaces
* deploy.sh: add helper routine to deal with clang-format error output logging from makefile
* gitignore: add clang-format log explicitly
* Refactoring for clang-format compiance
* Dockerfile: add sed
* Dockerfile: false alarm - remove sed since busybox-sed seems fine
* source/Makefile: reduce calls of clang-format & make error log more clean, clear, and tidy
* deploy.sh:check_style() - add removal of DOS EOLs for generated log
* source/Makefile:check-style: add more empty lines between blocks with errors for readability when suggestion is too long & heavy
* source/Makefile: add STOP var to check-style for exit on first failed file
* source/Makefile: check-style: make log looks more like traditional diff/patch output
* source/Core/BSP/Pinecilv2/MemMang/heap_5.c: clang-format refactoring using reasonable advises ... and then disable it in Makefile from scanning by clang-format
* Return headers include order
* clang-format config: disable warnings about non-alphabetic include order
* clang-format refactoring
* clang-format refactoring, part 2
* clang-format refactoring, part 3
* settingsGUI.cpp: refactoring, part 1
* settingsGUI.cpp: refactoring, part 2
* settingsGUI.cpp: refactoring, part 3
* settingsGUI.cpp: refactoring, part 4
* clang-format should be happy now
* workflows/push: put readme check into separate build step & update style
* clang-format: giving SortIncludes option second chance by tweaking a couple of headers a bit
* source/Makefile: check-style: add homebrew parser to check for { } in conditional blocks
* homebrew-format: add { } for if/else, while, and for & unify some comments style; left two errors intentionally to debug & improve parser
* source/Makefile: homebrew-format: fix false negative trigger for multi-line condition in if-s
* Sleep.cpp: unify style & comments
* source/Makefile: remove unused debug target
* Zipping compiler warning about POW_PD_EXT / Option A
* Zipping compiler warning about POW_PD_EXT / Option B
* BSP/configuration.h: implement option A for POW_PD_EXT warning
---------
Co-authored-by: Ben V. Brown <5425387+Ralim@users.noreply.github.com>
* Update header to declare full buffer size
* Strip refactoring
* Refactor the OLED scrolldown part 1
* High res capable scroll down
* Allow button press to skip scroll
* Bunch of Misc Fixups
* Refactor I2C_SOFT to new #define
* Stitch in some of TS101
Update ShowStartupWarnings.cpp
Update OLED.hpp
Update stm32f1xx_hal_msp.c
Update Setup.cpp
Update Power.cpp
Update Pins.h
Update configuration.h
Power Muxing
Working dual input Voltage handler
Scan mode required for differing injected channels
Inject both dc readings
Update configuration.h
Update configuration.h
Use htim4 for adc control on TS101
Refactor htim names
Add ADC_TRIGGER
Speed up BB I2C a lil
Update configuration.h
Update startup_stm32f103t8ux.S
Update configuration.h
Add LIS2DH clone
LIS2DH gains another clone
Create tooling to allow mapping accelerometers onto different buses
Update startup_stm32f103t8ux.S
Ensure PD IRQ is pulled up
* Stitch in some of TS101
Update ShowStartupWarnings.cpp
Update OLED.hpp
Update stm32f1xx_hal_msp.c
Update Setup.cpp
Update Power.cpp
Update Pins.h
Update configuration.h
Power Muxing
Working dual input Voltage handler
Scan mode required for differing injected channels
Inject both dc readings
Update configuration.h
Update configuration.h
Use htim4 for adc control on TS101
Refactor htim names
Add ADC_TRIGGER
Speed up BB I2C a lil
Update configuration.h
Update startup_stm32f103t8ux.S
Update configuration.h
Add LIS2DH clone
LIS2DH gains another clone
Create tooling to allow mapping accelerometers onto different buses
Update startup_stm32f103t8ux.S
Ensure PD IRQ is pulled up
Allow toggle which button enters PD debug
* Update Pins.h
* Fix hard coded IRQ Pin
Update stm32f1xx_it.c
* Enable EPR
* Tip resistance measurement
* TS101 is a direct drive tip
Update BSP.cpp
* Add S60 and TS101 to builds
Update push.yml
* Update MOVThread.cpp
* Refactor power menu handler
* Correct prescaler
Forgot to update since I changed the period
* Tune in the timer divider for tip control to make PWM less audible
---------
Co-authored-by: discip <53649486+discip@users.noreply.github.com>
