sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity
2,979 Commits 11 Branches 71 Tags
a1b9e40f673e530038d1859013d2135fafdfde87
Commit Graph

180 Commits

Author SHA1 Message Date
Ivan Zorin
a1b9e40f67 Show power source type on detailed screen in soldering mode (#1708) (#1709) 
* Show power source type on detailed screen in soldering mode (#1708)

* Update according to code review
 2023-06-18 21:38:26 +10:00
Ivan Zorin
c55a640d7f AutoStartMode refactoring (#1712) 
* OperatingModes/Sleep: extend current mode with idle status

* OperatingModes/Sleep: tipTemp section refactoring

* source/Core - settings: tiny refactoring of AutoStartMode management

* OperatingModes/Sleep: rollback OperatingMode update
 2023-06-17 17:07:26 +10:00
Ben V. Brown
e7bcf920ba Refactor PinecilV2 Tuning 
Closes #1688
 2023-06-04 12:13:26 +10:00
Ben V. Brown
286afad919 S60 Support (#1692) 
* Mock S60

* cleanup

* Start refactor of OLED init

* Setup timers roughly

* Set Vector table offset correctly

Update system_stm32f1xx.c

* Update OLED.cpp

* Update stm32f1xx_hal_msp.c

* Update configuration.h

* I2C init before GPIO

From Errata

Update stm32f1xx_hal_msp.c

Update Software_I2C.h

Allow no hardware I2C

* I2C BB run bus unlock at init

* cleanups

* Software I2C for now

* Mildly more graceful Interpolate

* Handle is powered by DC

Update Power.cpp

Update drawPowerSourceIcon.cpp

Update configuration.h

Update Setup.cpp

* Cleanup HomeScreen

* Segment remap oled at init

* Cleanup

* Update MOVThread.cpp

* Fix PWM Init

* Fix adc2 trigger

* Update configs

* Fixup warning

* Saner default config

* Update ThermoModel.cpp

* Util for current@voltage

* Hub238 warning

* Add hub238 handling in power mode

* Update USBPDDebug_FUSB.cpp

* HUSB238 debug

* Hook PSU Limit

* Use wrapping section of GRAM for scroll

Update OLED.hpp

* Update NTC table

* Fix HUB voltage picker

* Cleanup

* Larger tip filter

* Calibrate in a bunch closer

Update ThermoModel.cpp

* Update configuration.h

* Update HUB238.cpp

* Update configuration.h

* Movement Pin

* Update BSP.cpp

* tim2 irq

* Rough timer conversion (adc broken) but movement working

* Fix tim2 start

* Faster base PWM

* Ensure utils grabs config

* Add wattage limiter tolerance for device

* Speed up PWM and enable PWM current limiting

* tune for 12v

* Prevent start until PD done

* Update configuration.h

* Add HUB238 check for have re-negotiated

* Adjust timer to avoid noise when its possible
 2023-06-03 20:05:31 +10:00
Laura Klünder
578fd54463 soldering profile mode → profile mode 2023-04-25 11:56:57 +02:00
Laura Klünder
366cfbd794 add missing comment and exclude sleep code if sleep is disabled 2023-04-25 11:56:52 +02:00
Laura Klünder
f1879353b8 put soldering profile mode into its own file, put common functions in utils 2023-04-25 11:56:41 +02:00
Laura Klünder
cb2e8af700 full profile support 2023-04-23 23:48:24 +02:00
Laura Klünder
448e5c8ad1 profile mode is optional 2023-04-23 18:36:07 +02:00
Samuelrmlink
445069c92b USBPDDebug: Check whether VPDO is EPR or PPS (#1600) 
* USBPDDebug: Check whether VPDO is EPR or PPS.

* USBPDDebug - Allow trailing zeros after a decimal point.

---------

Co-authored-by: discip <53649486+discip@users.noreply.github.com>
 2023-04-02 00:14:45 +11:00
Thomas White
8e7e58018a expand bulk data to match individual value data (#1555) 
* track and return Operating mode with BLE

* move global variable to fix build on other platforms

* formatting

* expand bulk data to match individual value data

* formatting

* fix accidental single line if

---------

Co-authored-by: Ben V. Brown <5425387+Ralim@users.noreply.github.com>
 2023-02-05 00:04:51 +11:00
Thomas White
9802a622d5 Track and return Operating Mode with BLE (#1553) 
Track and return Operating Mode with BLE
 2023-02-04 09:33:43 +11:00
discip
fc10a24a89 simplification 2023-01-24 18:22:50 +01:00
Ben V. Brown
c2d69f91a6 Drop decimal when > 99.9W 2023-01-23 17:49:40 +11:00
Ben V. Brown
05628daba2 Merge branch 'dev' into new-translations-format 2023-01-22 22:05:13 +11:00
discip
1b84097e07 fixes cooldown flashing (#1515) 
* unify rate of cooldown flashing

* adjusted flashing threshold

* revert adjusted flashing threshold

* revert follow-up
 2022-12-31 22:41:00 +11:00
Ben V. Brown
fdc31467aa Use size encoded symbols 
Update make_translation.py
 2022-12-05 22:26:03 +11:00
Ben V. Brown
cc65cbb05e Update CJC.cpp 2022-11-25 21:25:49 +11:00
Ben V. Brown
6ca5f5c08d Merge branch 'dev' into refactor-gui-files 2022-11-25 21:24:49 +11:00
discip
c55ecbff6c fixed CJC calibration rule 
Did not calibrate if *handle temp* was higher than *tip temp*.
 2022-11-24 23:56:15 +01:00
Ben V. Brown
2c02f55139 Merge pull request #1436 from Ralim/test-slow-i2c 
Improve I2C for PinecilV2
 2022-11-23 21:09:04 +11:00
Ben V. Brown
6b8ee8ad48 Update GUIThread.cpp 2022-11-23 21:07:26 +11:00
Ben V. Brown
38b4a87602 Update CJC.cpp 2022-11-23 21:06:01 +11:00
Ben V. Brown
3007a44e45 Merge branch 'dev' into refactor-gui-files 2022-11-23 21:05:54 +11:00
Ben V. Brown
91f939e0f5 Update OperatingModes.h 2022-11-22 18:37:41 +11:00
Ben V. Brown
8ea43ed8be Update OperatingModes.h 2022-11-22 18:35:15 +11:00
Ben V. Brown
91cd702726 Update OperatingModes.h 2022-11-22 18:35:00 +11:00
Ben V. Brown
3b898ddc50 Refactor out home screen 2022-11-22 18:33:01 +11:00
Ben V. Brown
6cbb01db41 References 2022-11-22 18:26:16 +11:00
Ben V. Brown
27297fd692 Headers 2022-11-22 18:26:07 +11:00
Ben V. Brown
fe77fb097e Update printSleepCountdown.cpp 2022-11-22 18:25:58 +11:00
Ben V. Brown
124c3ecade Update shouldDeviceSleep.cpp 2022-11-22 18:25:57 +11:00
Ben V. Brown
da6b780941 Create shouldDeviceShutdown.cpp 2022-11-22 18:25:55 +11:00
Ben V. Brown
8d9e90c7b0 Create ShowWarning.cpp 2022-11-22 18:25:48 +11:00
Ben V. Brown
68eeb1276f Create PrintVoltage.cpp 2022-11-22 18:25:45 +11:00
Ben V. Brown
4cb74bddd7 Create min.cpp 2022-11-22 18:25:43 +11:00
Ben V. Brown
7bb41ff7c9 Create GUIDelay.cpp 2022-11-22 18:25:40 +11:00
Ben V. Brown
3836915b19 Create DrawTipTemperature.cpp 2022-11-22 18:25:38 +11:00
Ben V. Brown
af55cd5da4 Create USBPDDebug.cpp 2022-11-22 18:25:36 +11:00
Ben V. Brown
70e35316d4 Create ShowStartupWarnings.cpp 2022-11-22 18:25:33 +11:00
Ben V. Brown
296e599bf1 Create DebugMenu.cpp 2022-11-22 18:25:29 +11:00
Ben V. Brown
1432fc0dc3 Create CJC.cpp 2022-11-22 18:07:46 +11:00
Ben V. Brown
d82876c630 Create OperatingModes.h 2022-11-22 18:07:42 +11:00
Ben V. Brown
d7e68e074c Create Sleep.cpp 2022-11-22 18:07:40 +11:00
Ben V. Brown
24ab228f5a Create Soldering.cpp 2022-11-22 18:07:38 +11:00
Ben V. Brown
7a3527c680 Create TemperatureAdjust.cpp 2022-11-22 18:07:36 +11:00
Ben V. Brown
3f8004e81c Create checkUndervoltage.cpp 2022-11-22 18:07:34 +11:00
Ben V. Brown
d2dbeee658 Create drawPowerSourceIcon.cpp 2022-11-22 18:07:32 +11:00
Ben V. Brown
250e26e2d2 Create getSleepTimeout.cpp 2022-11-22 18:07:30 +11:00
Ben V. Brown
d46bdcbfcc Create OperatingModeUtilities.h 2022-11-22 18:07:27 +11:00