Ben V. Brown
|
286afad919
|
S60 Support (#1692)
* Mock S60
* cleanup
* Start refactor of OLED init
* Setup timers roughly
* Set Vector table offset correctly
Update system_stm32f1xx.c
* Update OLED.cpp
* Update stm32f1xx_hal_msp.c
* Update configuration.h
* I2C init before GPIO
From Errata
Update stm32f1xx_hal_msp.c
Update Software_I2C.h
Allow no hardware I2C
* I2C BB run bus unlock at init
* cleanups
* Software I2C for now
* Mildly more graceful Interpolate
* Handle is powered by DC
Update Power.cpp
Update drawPowerSourceIcon.cpp
Update configuration.h
Update Setup.cpp
* Cleanup HomeScreen
* Segment remap oled at init
* Cleanup
* Update MOVThread.cpp
* Fix PWM Init
* Fix adc2 trigger
* Update configs
* Fixup warning
* Saner default config
* Update ThermoModel.cpp
* Util for current@voltage
* Hub238 warning
* Add hub238 handling in power mode
* Update USBPDDebug_FUSB.cpp
* HUSB238 debug
* Hook PSU Limit
* Use wrapping section of GRAM for scroll
Update OLED.hpp
* Update NTC table
* Fix HUB voltage picker
* Cleanup
* Larger tip filter
* Calibrate in a bunch closer
Update ThermoModel.cpp
* Update configuration.h
* Update HUB238.cpp
* Update configuration.h
* Movement Pin
* Update BSP.cpp
* tim2 irq
* Rough timer conversion (adc broken) but movement working
* Fix tim2 start
* Faster base PWM
* Ensure utils grabs config
* Add wattage limiter tolerance for device
* Speed up PWM and enable PWM current limiting
* tune for 12v
* Prevent start until PD done
* Update configuration.h
* Add HUB238 check for have re-negotiated
* Adjust timer to avoid noise when its possible
|
2023-06-03 20:05:31 +10:00 |
|
Ben V. Brown
|
3594604efc
|
Fixes for I2C on Pinecil + USB-PD stack (#1099)
* Remove unused includes
* Adding in submodule
* Move fusb functions to the BSP
* Remove old code
* Creating IronOS PD integration wrapper
* Redirect to wrapper
* pd lib updates
* fix Docker build
* Finish linking across
* Cleanup
* Update Makefile
* Update push.yml
* Update push.yml
* PD -> Compensate for different tick rates
* Update codeql-analysis.yml
* Fix PD #define for @Firebie
* Check irq low at start
* Update BSP.h
* Update main.cpp
* Closer delay
* Update OLED.cpp
* Bugfix trying to start QC too early
* Missing fusb shouldnt hang qc
* Update FreeRTOSConfig.h
* Update the GD drivers
* Update Pinecil IRQ setup
* Redirect printf() to uart
* Update Power.cpp
* Adding extras to PD state
* Update USBPD.cpp
* Delay in printf
* Iterate once before delay on start
* Update usb-pd
* master usb-pd now
* Format gd libs
* Update gd32vf103_bkp.c
* Guard with PD timeout
* Remove CodeQL
* Slow for testing, fix runt pulses at start
* Fix runt pulse in read size 1
* Cleaner probing setup
* Testing delay during stop gen in read 1
* Update I2C driver
* Update gd32vf103_i2c.c
* Cleaning up i2c wrapper a little, given up on dma for rx
* Update preRTOS.cpp
* Update Setup.cpp
* Update MOVThread.cpp
* Slow down UART to work with new clock config
* Better ack setup for 2 byte read
* Cleanup POW_PD so cant be lost in #includes
* tipResistance -> TIP_RESISTANCE
* handle NOP race on len==2
* Update configuration.h
* Dont use neg timeout to mask anymore
* Not required for MHP
* Fix up source display Miniware
* Fix race on PD init
* Update POWThread.cpp
* Update formatting
* MHP format
* Update push.yml
* Faster TS80P I2C
* Bugfix for IRQ handlers
* Correctly handle I2C race on PD access
* Fix CI error (unused var) and MHP IRQ
* Test Pinecil alt ADC mode
|
2021-10-02 14:48:58 +10:00 |
|
Ben V. Brown
|
59a9dce7ec
|
Update IRQ.cpp
|
2021-04-05 16:29:17 +10:00 |
|
Ben V. Brown
|
854189d720
|
Add manual irq line check for the int task for PD
|
2021-04-05 15:05:12 +10:00 |
|
Ben V. Brown
|
f786901da0
|
Formatting the C/C++ files
|
2021-01-17 10:48:52 +11:00 |
|
Ben V. Brown
|
184b2c909f
|
./workspace/TS100 -> ./source/
|
2021-01-17 09:43:55 +11:00 |
|