Ben V. Brown
|
1fbcdcdf98
|
Pinecil V2 (#1341)
* Add SDK
* fork
* massaging makefile
* Drop git module
* Bring in sdk as its broken
Far, Far to much crap to fix with regex now
* Remove bl706
* rf_para_flash_t is missing defs
* Remove crapton of junk
* Remove yet more
* Poking I2C
* Update peripheral_config.h
* Update pinmux_config.h
* Update preRTOS.cpp
* Update main.hpp
* Setup template
* Verbose boot
* I2C ish
* Update I2C_Wrapper.cpp
* Update main.cpp
* Turn off I2C reading for now
* Display running
* Roughing out scheduling timer0
* Starting ADC setup
* Working scheduling of ADC 🎉
* Format adc headers
* Update IRQ.cpp
* Buttons working
* Slow down I2C
* Poking IRQ
* Larger stack required
* Accel on
* Trying to chase down why __libc_init_array isnt working yet
* Working c++
* Cleanup
* Bump stacks
* I2C wake part workaround
* Cleanup
* Working PWM init
* qc draft
* Hookup PWM
* Stable enough ADC
* ADC timing faster + timer without HAL
* Silence
* Remove boot banner
* Tuning in ADC
* Wake PID after ADC
* Remove unused hal
* Draft flash settings
* Working settings save & restore
* Update to prod model
* Cleanup
* NTC thermistor
* Correct adc gain
* Rough tip resistance progress
* Scratch out resistance awareness of the tip
* better adc settings
* Tweaking ADC
* ADC tweaking
* Make adc range scalable
* Update Dockerfile
* Update configuration.h
* Can read same ADC twice in a row
* ADC Setup
* Update PIDThread.cpp
* Lesser adc backoff
* Update USBPD.h
* Add device ID
* Update BSP_Power.h
* Update BSP.cpp
* DrawHex dynamicLength
* Shorter ID padding
* Show validation code
* tip measurement
* Create access for w0w1
* Expose w0 w1
* Enable debug
* crc32
* Device validation
* wip starting epr
* Logic refactor
* Safer PWM Init
* PD cleanups
* Update bl702_pwm.c
* Update power.cpp
* Update usb-pd
* io
* EPR decode
* Better gui for showing pd specs
* Rough handler for capabilities
* EPR
* Fix > 25V input
* Perform pow step after PPS
* Update BSP.cpp
* Fix timer output
* QC3
* Add tip resistance view
* Hold PD negotiation until detection is done for tip res
* Get Thermal mass
* Tip res =0 protection
* Update PIDThread.cpp
* Update GUIThread.cpp
* Rewrite tip resistance measurement
* Update GUIThread.cpp
* Fix fallback
* Far better tip resistance measurement
* Fix QC 0.6V D-
* Convert the interpolator to int32
* Correct the NTC lookup
* Update BSP.cpp
* Update Setup.cpp
* .
Update configuration #defines
More backported functions
* Update usb-pd
* More missed updates
* Refactor BSP
Magic BSP -> PinecilV2
Pine64 BSP -> Pinecil
Update Makefile
* Add Pinecilv2 to CI
* Pinecil v2 multi-lang
Update push.yml
* Update HallSensor.md
* Update README.md
* Fix wrong prestartcheck default
* Fix logo mapping
* Update Makefile
* Remove unused font block
* Style
* Style
* Remove unused timer funcs
* More culling TS80P
* Revert "More culling TS80P"
This reverts commit 2078b89be7.
* Revert "Remove unused timer funcs"
This reverts commit 0c693a89cc.
* Make VBus check maskable
* Remove DMA half transfer
* Drop using brightness and invert icons and go back to text
Saves flash space
* Refactor settings UI drawing descriptions
* Shorten setting function names
* Store bin file assets
* Fix MHP prestart
|
2022-08-19 15:39:37 +10:00 |
|
Ben V. Brown
|
3594604efc
|
Fixes for I2C on Pinecil + USB-PD stack (#1099)
* Remove unused includes
* Adding in submodule
* Move fusb functions to the BSP
* Remove old code
* Creating IronOS PD integration wrapper
* Redirect to wrapper
* pd lib updates
* fix Docker build
* Finish linking across
* Cleanup
* Update Makefile
* Update push.yml
* Update push.yml
* PD -> Compensate for different tick rates
* Update codeql-analysis.yml
* Fix PD #define for @Firebie
* Check irq low at start
* Update BSP.h
* Update main.cpp
* Closer delay
* Update OLED.cpp
* Bugfix trying to start QC too early
* Missing fusb shouldnt hang qc
* Update FreeRTOSConfig.h
* Update the GD drivers
* Update Pinecil IRQ setup
* Redirect printf() to uart
* Update Power.cpp
* Adding extras to PD state
* Update USBPD.cpp
* Delay in printf
* Iterate once before delay on start
* Update usb-pd
* master usb-pd now
* Format gd libs
* Update gd32vf103_bkp.c
* Guard with PD timeout
* Remove CodeQL
* Slow for testing, fix runt pulses at start
* Fix runt pulse in read size 1
* Cleaner probing setup
* Testing delay during stop gen in read 1
* Update I2C driver
* Update gd32vf103_i2c.c
* Cleaning up i2c wrapper a little, given up on dma for rx
* Update preRTOS.cpp
* Update Setup.cpp
* Update MOVThread.cpp
* Slow down UART to work with new clock config
* Better ack setup for 2 byte read
* Cleanup POW_PD so cant be lost in #includes
* tipResistance -> TIP_RESISTANCE
* handle NOP race on len==2
* Update configuration.h
* Dont use neg timeout to mask anymore
* Not required for MHP
* Fix up source display Miniware
* Fix race on PD init
* Update POWThread.cpp
* Update formatting
* MHP format
* Update push.yml
* Faster TS80P I2C
* Bugfix for IRQ handlers
* Correctly handle I2C race on PD access
* Fix CI error (unused var) and MHP IRQ
* Test Pinecil alt ADC mode
|
2021-10-02 14:48:58 +10:00 |
|
Ben V. Brown
|
0336432994
|
Format
|
2021-06-05 22:51:47 +10:00 |
|
Ben V. Brown
|
64cb9c1158
|
Fix build issues
|
2021-05-03 22:39:57 +10:00 |
|
Ben V. Brown
|
ee12c99d9e
|
Update PD to support awareness of having inductor for DCDC op
+ fix voltage divider to be more on point
+ Create adjustment for thermal mass causes overshoot
|
2021-05-03 22:36:25 +10:00 |
|
Ben V. Brown
|
dd5daf51e3
|
Format new content
|
2021-05-03 22:10:14 +10:00 |
|
Ben V. Brown
|
69ef62f0a7
|
Update st libs
|
2021-05-03 21:51:40 +10:00 |
|
Ben V. Brown
|
35f4054530
|
Import miniware files
|
2021-04-26 20:58:39 +10:00 |
|