discip
c89db78b45
Calibrate CJC at next boot ( #1398 )
...
Changes Cold Junction Compensation (Tip Offset / CJC) to be performed during bootup time. (After starting in settings)
2022-09-10 20:52:57 +10:00
discip
b5323d9c77
reorder debug menu . . . ( #1380 )
...
* Update DebugMenu.md
* Update make_translation.py
* Update GUIThread.cpp
* Update DebugMenu.md
2022-08-25 09:17:15 +10:00
discip
3a44259735
typo fix ( #1368 )
2022-08-20 23:01:24 +10:00
Ben V. Brown
1fbcdcdf98
Pinecil V2 ( #1341 )
...
* Add SDK
* fork
* massaging makefile
* Drop git module
* Bring in sdk as its broken
Far, Far to much crap to fix with regex now
* Remove bl706
* rf_para_flash_t is missing defs
* Remove crapton of junk
* Remove yet more
* Poking I2C
* Update peripheral_config.h
* Update pinmux_config.h
* Update preRTOS.cpp
* Update main.hpp
* Setup template
* Verbose boot
* I2C ish
* Update I2C_Wrapper.cpp
* Update main.cpp
* Turn off I2C reading for now
* Display running
* Roughing out scheduling timer0
* Starting ADC setup
* Working scheduling of ADC 🎉
* Format adc headers
* Update IRQ.cpp
* Buttons working
* Slow down I2C
* Poking IRQ
* Larger stack required
* Accel on
* Trying to chase down why __libc_init_array isnt working yet
* Working c++
* Cleanup
* Bump stacks
* I2C wake part workaround
* Cleanup
* Working PWM init
* qc draft
* Hookup PWM
* Stable enough ADC
* ADC timing faster + timer without HAL
* Silence
* Remove boot banner
* Tuning in ADC
* Wake PID after ADC
* Remove unused hal
* Draft flash settings
* Working settings save & restore
* Update to prod model
* Cleanup
* NTC thermistor
* Correct adc gain
* Rough tip resistance progress
* Scratch out resistance awareness of the tip
* better adc settings
* Tweaking ADC
* ADC tweaking
* Make adc range scalable
* Update Dockerfile
* Update configuration.h
* Can read same ADC twice in a row
* ADC Setup
* Update PIDThread.cpp
* Lesser adc backoff
* Update USBPD.h
* Add device ID
* Update BSP_Power.h
* Update BSP.cpp
* DrawHex dynamicLength
* Shorter ID padding
* Show validation code
* tip measurement
* Create access for w0w1
* Expose w0 w1
* Enable debug
* crc32
* Device validation
* wip starting epr
* Logic refactor
* Safer PWM Init
* PD cleanups
* Update bl702_pwm.c
* Update power.cpp
* Update usb-pd
* io
* EPR decode
* Better gui for showing pd specs
* Rough handler for capabilities
* EPR
* Fix > 25V input
* Perform pow step after PPS
* Update BSP.cpp
* Fix timer output
* QC3
* Add tip resistance view
* Hold PD negotiation until detection is done for tip res
* Get Thermal mass
* Tip res =0 protection
* Update PIDThread.cpp
* Update GUIThread.cpp
* Rewrite tip resistance measurement
* Update GUIThread.cpp
* Fix fallback
* Far better tip resistance measurement
* Fix QC 0.6V D-
* Convert the interpolator to int32
* Correct the NTC lookup
* Update BSP.cpp
* Update Setup.cpp
* .
Update configuration #defines
More backported functions
* Update usb-pd
* More missed updates
* Refactor BSP
Magic BSP -> PinecilV2
Pine64 BSP -> Pinecil
Update Makefile
* Add Pinecilv2 to CI
* Pinecil v2 multi-lang
Update push.yml
* Update HallSensor.md
* Update README.md
* Fix wrong prestartcheck default
* Fix logo mapping
* Update Makefile
* Remove unused font block
* Style
* Style
* Remove unused timer funcs
* More culling TS80P
* Revert "More culling TS80P"
This reverts commit 2078b89be70c693a89cc
2022-08-19 15:39:37 +10:00
Aaronjamt
972d2fffac
Allow preheating iron during boot logo
...
Autostart (if enabled) _before_ showing boot logo (rather than waiting for the entire animation to finish). Only heats if the boot logo is on but not infinite (and autostart is set to heat). Heats to sleep temperature or 75*C, whichever is lower, for safety (and if the iron can get to 75* by the time the logo disappears then this really doesn't matter much). This is purely a preheat if your iron is low-powered and takes a long time to warm and so if autostart is set to heat to soldering temperature, it will start heating the rest of the way once the boot logo disappears.
2022-07-29 10:53:21 -07:00
Ben V. Brown
f1ceb0ec62
Merge branch 'dev' into pd-epr
2022-07-25 17:34:13 +10:00
Ben V. Brown
dd239375b1
All Ticks as the right TickType
...
Update usb-pd
2022-07-25 16:45:29 +10:00
Ben V. Brown
7166dd1f33
Update PD debug to be EPR aware
2022-07-18 22:59:51 +10:00
Ben V. Brown
078b8f5626
DeviceID ( #1314 )
...
* Ability to print hex
* Add device ID getter
* Refactor debug menu
* No longer need patch
* Update make_translation.py
* Fix typo
* Fix hex drawing
2022-06-16 21:39:53 +10:00
Ben V. Brown
165a9952c2
MHP30: Shutdown settings ( #1307 )
...
* Reduce PPS max to 20V to avoid instability
Some PSU's cant actually run at 21V
* Creating a rough draft of a "pre start check" concept
* Newer alpine
* Cleaning up MHP detection
* Cleanup comments
* PID: Run prestart based on ADC IRQ rather than times
* MHP30: Far better startup for detecting tip gain
* Newer alpine for github CI
* Bugfix: Exit on movement
* Feature: Shutdown timeout for MHP30
2022-06-16 20:28:49 +10:00
Ben V. Brown
3bb1b7bc32
Startup behaviour fixes ( #1306 )
...
* Reduce PPS max to 20V to avoid instability
Some PSU's cant actually run at 21V
* Creating a rough draft of a "pre start check" concept
* Newer alpine
* Cleaning up MHP detection
* Cleanup comments
* PID: Run prestart based on ADC IRQ rather than times
* MHP30: Far better startup for detecting tip gain
* Newer alpine for github CI
2022-06-16 20:21:46 +10:00
Ben V. Brown
d1d403376f
Fix typo in PD info screen
2022-04-04 13:07:48 +10:00
Ben V. Brown
a73f634cff
Pinecil pd tweaking ( #1272 )
...
* Raise PD max to 21V
* gui -> settingsGUI
* VBus probe cache
* Rough pass PD capabilities display
* Cleanup build errors
* PD Debug menu working
* Update make_translation.py
* settingsGUI
* Update GUIThread.cpp
* Nicer debug prints
* Show VBus in PD debug
* Update GUIThread.cpp
* Update make_translation.py
* Add docs
* Build tweaks for TS80P 😢
* Show PPS ranges
2022-04-03 12:58:07 +10:00
Ben V. Brown
232009bf54
Logo rework ( #1232 )
...
!Allows for new logo format that supports animation!
Also moves logos out of repo into their own repo for ease of management.
Changes:
* Remove deprecated logos
* Draft new Bootloader decoder
* Use new logo handler
* Simplify logo code further
* Fix time bug on static images
* Fix exit at end of animation
* Docs
* Interframe delay in 5ms increments
* Quick pass handling empty updates
* Exit at the end _after_ the frame delay
* One final delay
* Fix for overrun of logo data
* Fixes https://github.com/Ralim/IronOS-Meta/issues/7
2022-03-14 09:08:05 +11:00
Ben V. Brown
e065be37d9
Force SC7 to probe last
2022-02-12 18:25:52 +11:00
Ben V. Brown
16882fee61
only vbus mod check on pinecil
...
If a TS80P has it connected, other things blow up first at 20V
2022-02-12 10:34:22 +11:00
Ben V. Brown
78344279d3
Merge branch 'master' into pinecil-mod-detect
2022-02-06 15:56:57 +11:00
Ben V. Brown
f715f77848
fix oled layout _again_
2022-02-06 15:56:41 +11:00
Ben V. Brown
0735d4f704
Update GUIThread.cpp
2022-02-06 14:42:01 +11:00
Ben V. Brown
265e152c18
Add to debug menu
2022-02-06 13:15:01 +11:00
Ben V. Brown
0fcde2806d
Update GUIThread.cpp
2022-02-05 13:11:15 +11:00
Ben V. Brown
1122d18526
Merge branch 'master' into rework
2022-02-05 12:43:53 +11:00
Ben V. Brown
1bdf9654d1
Merge pull request #1206 from Ralim/ts100-runaway
...
TS100 warning fix (#1192 )
2022-02-05 12:34:19 +11:00
Ben V. Brown
513a2d66bb
Always set cursor back to (0,0)
2022-02-05 12:34:08 +11:00
Ben V. Brown
89070e1f40
Merge branch 'master' into ts100-runaway
2022-02-05 12:32:33 +11:00
Ben V. Brown
15763dd55b
Cleanup OLED_FLIP logic
...
Update OLED.hpp
Update OLED.hpp
Update OLED.hpp
2022-02-05 12:23:51 +11:00
Ben V. Brown
a461577ee2
Update PIDThread.cpp
...
Should use osDelay to be scheduler safe
2022-02-05 10:23:42 +11:00
Ben V. Brown
c38dfb6007
Dont wrap negative deltas
2022-02-05 09:59:45 +11:00
discip
eba52bfd5b
removing HALL from unsupported devices _2
2022-02-04 23:43:13 +01:00
Ben V. Brown
a19b33c85e
Take absolute value of hall sensor for debug menu
2022-02-05 09:05:15 +11:00
Christian Rahl
6a9c648b62
< the place where 2 spaces should have been.
2022-01-22 22:58:46 -05:00
Christian Rahl
9eaa66f063
Tomato tomatoo, tabss or spacess
2022-01-22 22:53:32 -05:00
Christian Rahl
d91253a95b
Clang 2.0
2022-01-22 22:51:19 -05:00
Christian Rahl
bf7909123c
CLANG HATES ME
2022-01-22 22:45:00 -05:00
Christian Rahl
7bb5b6adb7
Added Ifdef to check against if the hall sensor is available to read. If not, read back OFF.
2022-01-22 22:30:15 -05:00
Christian Rahl
05f38b096c
Add new debug menu item to view raw hall effect sensor output.
2022-01-22 19:33:24 -05:00
discip
f1addbf9a0
Update GUIThread.cpp
2022-01-19 22:40:39 +01:00
discip
cb7756d381
Update GUIThread.cpp
2022-01-19 02:08:03 +01:00
discip
7db7a11787
even a bit less code
2022-01-08 17:38:38 +01:00
discip
4989a030d5
flipped DisconnecetedTip Icon gets now generated
2022-01-08 16:56:52 +01:00
Ben V. Brown
37418047a0
Merge branch 'master' into settings
2022-01-07 00:14:32 +11:00
discip
d7b759c534
fixed detailed view for lefties
2022-01-06 02:30:45 +01:00
discip
761bafad83
fixed detailed view for lefties
2022-01-06 02:13:38 +01:00
Ben V. Brown
52f0d5242a
Update GUIThread.cpp
2022-01-05 21:04:33 +11:00
Ben V. Brown
827308f691
Add some rounding
2022-01-05 21:00:14 +11:00
Ben V. Brown
26c7d0f2cb
Clean up soldering temp adjust button handling
2022-01-05 20:41:38 +11:00
Ben V. Brown
4dce812cf9
Merge pull request #1098 from discip/disconnected-tip
...
Disconnected tip pic in detailed idle screen
2021-12-20 09:28:47 +11:00
discip
73bedf3981
Update GUIThread.cpp
2021-10-28 19:48:14 +02:00
discip
d72b27543b
Merge branch 'master' into disconnected-tip
2021-10-02 13:30:06 +02:00
Ben V. Brown
3594604efc
Fixes for I2C on Pinecil + USB-PD stack ( #1099 )
...
* Remove unused includes
* Adding in submodule
* Move fusb functions to the BSP
* Remove old code
* Creating IronOS PD integration wrapper
* Redirect to wrapper
* pd lib updates
* fix Docker build
* Finish linking across
* Cleanup
* Update Makefile
* Update push.yml
* Update push.yml
* PD -> Compensate for different tick rates
* Update codeql-analysis.yml
* Fix PD #define for @Firebie
* Check irq low at start
* Update BSP.h
* Update main.cpp
* Closer delay
* Update OLED.cpp
* Bugfix trying to start QC too early
* Missing fusb shouldnt hang qc
* Update FreeRTOSConfig.h
* Update the GD drivers
* Update Pinecil IRQ setup
* Redirect printf() to uart
* Update Power.cpp
* Adding extras to PD state
* Update USBPD.cpp
* Delay in printf
* Iterate once before delay on start
* Update usb-pd
* master usb-pd now
* Format gd libs
* Update gd32vf103_bkp.c
* Guard with PD timeout
* Remove CodeQL
* Slow for testing, fix runt pulses at start
* Fix runt pulse in read size 1
* Cleaner probing setup
* Testing delay during stop gen in read 1
* Update I2C driver
* Update gd32vf103_i2c.c
* Cleaning up i2c wrapper a little, given up on dma for rx
* Update preRTOS.cpp
* Update Setup.cpp
* Update MOVThread.cpp
* Slow down UART to work with new clock config
* Better ack setup for 2 byte read
* Cleanup POW_PD so cant be lost in #includes
* tipResistance -> TIP_RESISTANCE
* handle NOP race on len==2
* Update configuration.h
* Dont use neg timeout to mask anymore
* Not required for MHP
* Fix up source display Miniware
* Fix race on PD init
* Update POWThread.cpp
* Update formatting
* MHP format
* Update push.yml
* Faster TS80P I2C
* Bugfix for IRQ handlers
* Correctly handle I2C race on PD access
* Fix CI error (unused var) and MHP IRQ
* Test Pinecil alt ADC mode
2021-10-02 14:48:58 +10:00
