diff --git a/Documentation/Flashing.md b/Documentation/Flashing.md
index ff22fdd0..35ed1962 100644
--- a/Documentation/Flashing.md
+++ b/Documentation/Flashing.md
@@ -97,12 +97,13 @@ If your OS is not currently supported by the [Updater](https://github.com/pine64
 ### Steps
 
 ⛔ Do not use the DC power jack while updating firmware or you may destroy your PC.⛔
-2. Download and extract the firmware package from Github [IronOS Releases](https://github.com/Ralim/IronOS/releases)
-3. Enter DFU mode: hold down the (-) button at the back of the iron (do not release it).
-4. Connect USB to PC, and USB-C to back of Pinecil, keep holding (-) button down.
-5. The screen will stay **black/off** to indicate the Pinecil is in DFU mode. This is normal.
-6. Once USB cable is connected at two ends, wait additional 10 seconds, then release the (-) button.
-7. Continue to the next section below for your specific OS to complete loading the `.dfu` file onto Pinecil.
+
+1. Download and extract the firmware package from Github [IronOS Releases](https://github.com/Ralim/IronOS/releases).
+2. Enter DFU mode: hold down the (-) button at the back of the iron (do not release it).
+3. Connect USB to PC, and USB-C to back of Pinecil, keep holding (-) button down.
+4. The screen will stay **black/off** to indicate the Pinecil is in DFU mode. This is normal.
+5. Once USB cable is connected at two ends, wait additional 10 seconds, then release the (-) button.
+6. Continue to the next section below for your specific OS to complete loading the `.dfu` file onto Pinecil.
 
 ### Linux and Mac