Update QC to allow 20V theoretically + allow query for power source

workspace/TS100/Core/BSP/BSP.h

@@ -68,6 +68,8 @@ bool getHallSensorFitted();
 // If the sensor is single polarity (or polarity insensitive) just return 0..32768
 int16_t getRawHallEffect();
 
+//Returns true if power is from dumb "DC" input rather than "smart" QC or PD
+bool getIsPoweredByDCIN();
 
 #ifdef __cplusplus
 }

workspace/TS100/Core/BSP/Pine64/BSP.cpp

@@ -119,7 +119,7 @@ uint8_t getButtonB() {
 }
 
 void reboot() {
-	// TODO
+	//Spin for watchdog
 	for (;;) {
 	}
 }
@@ -127,3 +127,4 @@ void reboot() {
 void delay_ms(uint16_t count) {
 	delay_1ms(count);
 }
+

workspace/TS100/Core/BSP/Pine64/Power.cpp

@@ -34,3 +34,16 @@ uint8_t usb_pd_detect() {
 	return false;
 }
 
+bool getIsPoweredByDCIN() {
+	//We return false until we are sure we are not using PD
+	if (PolicyEngine::setupCompleteOrTimedOut() == false) {
+		return false;
+	}
+	if (PolicyEngine::pdHasNegotiated()) {
+		return false;	// We are using PD
+	}
+	if (hasQCNegotiated()) {
+		return false; // We are using QC
+	}
+	return true;
+}

workspace/TS100/Core/Inc/QC3.h

@@ -13,7 +13,7 @@ extern "C" {
 #endif
 void seekQC(int16_t Vx10, uint16_t divisor);
 void startQC(uint16_t divisor); // Tries to negotiate QC for highest voltage, must be run after
-
+bool hasQCNegotiated();// Returns true if a QC negotiation worked (we are using QC)
 #ifdef __cplusplus
 }
 #endif

workspace/TS100/Core/Src/QC3.cpp

@@ -52,8 +52,14 @@ void seekQC(int16_t Vx10, uint16_t divisor) {
 		return;
 	if (xTaskGetTickCount() < 1000)
 		return;
-	if (Vx10 > 130)
-		Vx10 = 130;  // Cap max value at 13V
+#ifdef POW_QC_20V
+	if (Vx10 > 200)
+		Vx10 = 200;  // Cap max value at 20V
+#else
+				if (Vx10 > 130)
+				Vx10 =130;  // Cap max value at 13V
+
+#endif
 	// Seek the QC to the Voltage given if this adapter supports continuous mode
 	// try and step towards the wanted value
 
@@ -80,25 +86,25 @@ void seekQC(int16_t Vx10, uint16_t divisor) {
 		osDelay(100);
 	}
 #ifdef ENABLE_QC2
-    // Re-measure
-    /* Disabled due to nothing to test and code space of around 1k*/
-    steps = vStart - getInputVoltageX10(divisor, 1);
-    if (steps < 0) steps = -steps;
-    if (steps > 4) {
-        // No continuous mode, so QC2
-        QCMode = 2;
-        // Goto nearest
-        if (Vx10 > 110) {
-            // request 12V
-            // D- = 0.6V, D+ = 0.6V
-            // Clamp PB3
-            QC_Seek12V();
-
-        } else {
-            // request 9V
-            QC_Seek9V();
-        }
-    }
+	// Re-measure
+	/* Disabled due to nothing to test and code space of around 1k*/
+	steps = vStart - getInputVoltageX10(divisor, 1);
+	if (steps < 0) steps = -steps;
+	if (steps > 4) {
+		// No continuous mode, so QC2
+		QCMode = 2;
+		// Goto nearest
+		if (Vx10 > 190) {
+			// request 20V
+			QC_Seek20V();
+		} else if (Vx10 > 110) {
+			// request 12V
+			QC_Seek12V();
+		} else {
+			// request 9V
+			QC_Seek9V();
+		}
+	}
 #endif
 }
 // Must be called after FreeRToS Starts
@@ -106,8 +112,8 @@ void startQC(uint16_t divisor) {
 	// Pre check that the input could be >5V already, and if so, dont both
 	// negotiating as someone is feeding in hv
 	uint16_t vin = getInputVoltageX10(divisor, 1);
-	if (vin > 100) {
-		QCMode = 1;  // Already at 12V, user has probably over-ridden this
+	if (vin > 80) {
+		QCMode = 0;	//If over 8V something else has already negotiated
 		return;
 	}
 	if (QCTries > 10) {
@@ -161,3 +167,7 @@ void startQC(uint16_t divisor) {
 	}
 
 }
+
+bool hasQCNegotiated() {
+	return QCMode > 0;
+}