sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity

Deployed a1d84fff with MkDocs version: 1.3.1

Browse Source
This commit is contained in:
github-actions[bot]
2022-09-21 09:33:57 +00:00
parent 4e0b2a82a7
commit f367e75a42
9 changed files with 14 additions and 14 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
Menu/index.html
View File

@@ -165,7 +165,7 @@ Note that cutoff messages can also be triggered by using a power supply that is
<li>Press both buttons at the same time to Save and Exit to the menu</li>
</ol>
<h3 id="calibrate-tip-cjc">Calibrate Tip CJC</h3>
<p>This performs a Tip Cold Junction Calibration (CJC) (<a href="/Documentation/Temperature.md">see Temperature for details</a>). This is normally not needed unless you have an issue with tip temperature or your tips are wearing out prematurely. Changing tip lengths does not necessarily mean a calibration is needed. Check first that your tips are not defective, and measured resistance is close to specifications (Pinecil/TS100 short tips 6.2 Ω, long tips 8 Ω, TS80(P) ~4.5 Ω).</p>
<p>This performs a Tip Cold Junction Calibration (CJC) (<a href="https://ralim.github.io/IronOS/Temperature/">see Temperature for details</a>). This is normally not needed unless you have an issue with tip temperature or your tips are wearing out prematurely. Changing tip lengths does not necessarily mean a calibration is needed. Check first that your tips are not defective, and measured resistance is close to specifications (Pinecil/TS100 short tips 6.2 Ω, long tips 8 Ω, TS80(P) ~4.5 Ω).</p>
<p>What this is for: some tips have an offset on their readings which causes issues, i.e., the actual temperature of the tip is much higher than displayed. To calibrate this out, perform the following steps. </p>
<p>Caution: if the method below is not followed, the iron could be worse than before calibration. If you need to repeat the method, first unplug and let the handle/PCB cool down to room temperature.</p>
<ol>