sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity

Migrate all Miniware devices to use Bit-Bang I2C (#1838)

Browse Source 
* MHP30 move to I2C Bit Banging

* Fixup Accelerometer drivers so all can use I2CBB

* No STM32 I2C driver anymore

* TS100 on I2CBB

* Miniware on BB

* Fixup S60 build

* format

format
This commit is contained in:
Ben V. Brown
2023-11-16 21:32:56 +11:00
committed by GitHub
parent c308fe8cc2
commit e3bad2adae
46 changed files with 144 additions and 8044 deletions
Download Patch File Download Diff File Expand all files Collapse all files

33
source/Core/BSP/Miniware/configuration.h
View File

@@ -86,7 +86,7 @@
#define POWER_PULSE_DEFAULT 0
#else
#define POWER_PULSE_DEFAULT 5
#endif /* TS100 */
#endif /* TS100 */
#define POWER_PULSE_WAIT_DEFAULT 4 // Default rate of the power pulse: 4*2500 = 10000 ms = 10 s
#define POWER_PULSE_DURATION_DEFAULT 1 // Default duration of the power pulse: 1*250 = 250 ms
@@ -156,6 +156,10 @@
#define MIN_BOOST_TEMP_C 250 // The min settable temp for boost mode °C
#define MIN_BOOST_TEMP_F 480 // The min settable temp for boost mode °F
// Miniware cant be trusted, and keep using the GD32 randomly now, so assume they will clones in the future
#define I2C_SOFT_BUS_1 1
#ifdef MODEL_TS100
#define VOLTAGE_DIV 467 // 467 - Default divider from schematic
#define CALIBRATION_OFFSET 900 // 900 - Default adc offset in uV
@@ -165,8 +169,9 @@
#define POWER_LIMIT_STEPS 5
#define OP_AMP_GAIN_STAGE OP_AMP_GAIN_STAGE_TS100
#define TEMP_uV_LOOKUP_HAKKO
#define USB_PD_VMAX 20 // Maximum voltage for PD to negotiate
#define USB_PD_VMAX 20 // Maximum voltage for PD to negotiate
#define OLED_I2CBB1 1
#define ACCEL_I2CBB1 1
#define HARDWARE_MAX_WATTAGE_X10 750
#define TIP_THERMAL_MASS 65 // X10 watts to raise 1 deg C in 1 second
#define TIP_RESISTANCE 75 // x10 ohms, 7.5 typical for ts100 tips
@@ -194,7 +199,6 @@
#define POW_DC 1
#define POW_PD 1
#define I2C_SOFT_BUS_2 1
#define I2C_SOFT_BUS_1 1
#define OLED_I2CBB1 1
#define USB_PD_I2CBB2 1
#define USB_PD_VMAX 28 // Device supposedly can do 28V; looks like vmax is 33 ish
@@ -218,7 +222,7 @@
#define TIP_THERMAL_MASS 40
#define TIP_RESISTANCE 45 // x10 ohms, 4.5 typical for ts80 tips
#define I2C_SOFT_BUS_2 1
#define LIS_ORI_FLIP
#define OLED_FLIP
#endif /* TS80(P) */
@@ -228,6 +232,8 @@
#define CALIBRATION_OFFSET 900 // the adc offset in uV
#define PID_POWER_LIMIT 35 // Sets the max pwm power limit
#define POWER_LIMIT 32 // 24 watts default power limit
#define OLED_I2CBB1 1
#define ACCEL_I2CBB1 1
#define HARDWARE_MAX_WATTAGE_X10 320
@@ -237,17 +243,18 @@
#endif /* TS80 */
#ifdef MODEL_TS80P
#define VOLTAGE_DIV 650 // Default for TS80P with slightly different resistors
#define CALIBRATION_OFFSET 1500 // the adc offset in uV
#define PID_POWER_LIMIT 35 // Sets the max pwm power limit
#define POWER_LIMIT 32 // 30 watts default power limit
#define VOLTAGE_DIV 650 // Default for TS80P with slightly different resistors
#define CALIBRATION_OFFSET 1500 // the adc offset in uV
#define PID_POWER_LIMIT 35 // Sets the max pwm power limit
#define POWER_LIMIT 32 // 30 watts default power limit
#define I2C_SOFT_BUS_2 1
#define HARDWARE_MAX_WATTAGE_X10 320
#define OLED_I2CBB1 1
#define ACCEL_I2CBB1 1
#define POW_PD 1
#define POW_QC 1
#define TEMP_NTC
#define I2C_SOFT_BUS_2 1
#define SC7_ORI_FLIP
#endif /* TS80P */
@@ -255,8 +262,8 @@
#define FLASH_LOGOADDR (0x08000000 + (126 * 1024))
#define SETTINGS_START_PAGE (0x08000000 + (127 * 1024))
#else
#define FLASH_LOGOADDR (0x08000000 + (62 * 1024))
#define SETTINGS_START_PAGE (0x08000000 + (63 * 1024))
#define FLASH_LOGOADDR (0x08000000 + (62 * 1024))
#define SETTINGS_START_PAGE (0x08000000 + (63 * 1024))
#endif /* TS101 */
#endif /* CONFIGURATION_H_ */