diff --git a/Documentation/GettingStarted.md b/Documentation/GettingStarted.md
index cf31df52..7bc3d910 100644
--- a/Documentation/GettingStarted.md
+++ b/Documentation/GettingStarted.md
@@ -82,9 +82,9 @@ Profile mode plays out as follows:
 
 1. Check if the temperature is below 55C. If not, you will get a warning and cannot enter profile mode.
 2. Preheat by raising the target temperature to the configured preheat temperature with the configured preheat speed.
-3. Wait for the iron to reach the preheat temperature.
+3. Wait for the device to reach the preheat temperature.
 4. Gradually move the target temperature to the configured end temperature of the first phase over the configured duration. 
-5. Wait for the iron to reach the end temperature. 
+5. Wait for the device to reach the end temperature. 
 6. Repeat steps 4 and 5 for the next phases until there are no more phases configured.
 7. Cool down by lowering the target temperature to 0 with the configured cooldown speed. 
 8. Once the temperature is below 55C, sound the buzzer (if available) and exit profile mode. 
diff --git a/Translations/translation_JA_JP.json b/Translations/translation_JA_JP.json
index f2db8ef0..74a3cd0c 100755
--- a/Translations/translation_JA_JP.json
+++ b/Translations/translation_JA_JP.json
@@ -61,16 +61,16 @@
             "message": "オフ"
         },
         "ProfilePreheatString": {
-            "message": "Preheat\n"
+            "message": "Preheat"
         },
         "ProfileCooldownString": {
-            "message": "Cooldown\n"
+            "message": "Cooldown"
         },
         "DeviceFailedValidationWarning": {
             "message": "このデバイスはおそらく偽造品です"
         },
         "TooHotToStartProfileWarning": {
-            "message": "Too hot to\nstart profile"
+            "message": "Too hot to start profile"
         }
     },
     "characters": {
@@ -153,59 +153,59 @@
             "description": "半田付けモード時に両方のボタンを長押しし、ボタンロックする <×=オフ | ブ=ブーストのみ許可 | 全=すべてをロック>"
         },
         "ProfilePhases": {
-            "displayText": "Profile\nPhases",
+            "displayText": "Profile Phases",
             "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
-            "displayText": "Preheat\nTemp",
+            "displayText": "Preheat Temp",
             "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
-            "displayText": "Preheat\nSpeed",
+            "displayText": "Preheat Speed",
             "description": "Preheat at this rate (degrees per second)"
         },
         "ProfilePhase1Temp": {
-            "displayText": "Phase 1\nTemp",
+            "displayText": "Phase 1 Temp",
             "description": "Target temperature for the end of this phase"
         },
         "ProfilePhase1Duration": {
-            "displayText": "Phase 1\nDuration",
+            "displayText": "Phase 1 Duration",
             "description": "Target duration of this phase (seconds)"
         },
         "ProfilePhase2Temp": {
-            "displayText": "Phase 2\nTemp",
+            "displayText": "Phase 2 Temp",
             "description": ""
         },
         "ProfilePhase2Duration": {
-            "displayText": "Phase 2\nDuration",
+            "displayText": "Phase 2 Duration",
             "description": ""
         },
         "ProfilePhase3Temp": {
-            "displayText": "Phase 3\nTemp",
+            "displayText": "Phase 3 Temp",
             "description": ""
         },
         "ProfilePhase3Duration": {
-            "displayText": "Phase 3\nDuration",
+            "displayText": "Phase 3 Duration",
             "description": ""
         },
         "ProfilePhase4Temp": {
-            "displayText": "Phase 4\nTemp",
+            "displayText": "Phase 4 Temp",
             "description": ""
         },
         "ProfilePhase4Duration": {
-            "displayText": "Phase 4\nDuration",
+            "displayText": "Phase 4 Duration",
             "description": ""
         },
         "ProfilePhase5Temp": {
-            "displayText": "Phase 5\nTemp",
+            "displayText": "Phase 5 Temp",
             "description": ""
         },
         "ProfilePhase5Duration": {
-            "displayText": "Phase 5\nDuration",
+            "displayText": "Phase 5 Duration",
             "description": ""
         },
         "ProfileCooldownSpeed": {
-            "displayText": "Cooldown\nSpeed",
+            "displayText": "Cooldown Speed",
             "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
diff --git a/Translations/translation_YUE_HK.json b/Translations/translation_YUE_HK.json
index 3b990f9c..745e6801 100644
--- a/Translations/translation_YUE_HK.json
+++ b/Translations/translation_YUE_HK.json
@@ -61,16 +61,16 @@
             "message": "關"
         },
         "ProfilePreheatString": {
-            "message": "Preheat\n"
+            "message": "Preheat"
         },
         "ProfileCooldownString": {
-            "message": "Cooldown\n"
+            "message": "Cooldown"
         },
         "DeviceFailedValidationWarning": {
             "message": "依支焫雞好有可能係冒牌貨！"
         },
         "TooHotToStartProfileWarning": {
-            "message": "Too hot to\nstart profile"
+            "message": "Too hot to start profile"
         }
     },
     "characters": {
@@ -153,59 +153,59 @@
             "description": "喺焊接模式時，同時長撳兩粒掣啓用撳掣鎖定 <無=停用 | 增=淨係容許增熱模式 | 全=鎖定全部>"
         },
         "ProfilePhases": {
-            "displayText": "Profile\nPhases",
+            "displayText": "Profile Phases",
             "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
-            "displayText": "Preheat\nTemp",
+            "displayText": "Preheat Temp",
             "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
-            "displayText": "Preheat\nSpeed",
+            "displayText": "Preheat Speed",
             "description": "Preheat at this rate (degrees per second)"
         },
         "ProfilePhase1Temp": {
-            "displayText": "Phase 1\nTemp",
+            "displayText": "Phase 1 Temp",
             "description": "Target temperature for the end of this phase"
         },
         "ProfilePhase1Duration": {
-            "displayText": "Phase 1\nDuration",
+            "displayText": "Phase 1 Duration",
             "description": "Target duration of this phase (seconds)"
         },
         "ProfilePhase2Temp": {
-            "displayText": "Phase 2\nTemp",
+            "displayText": "Phase 2 Temp",
             "description": ""
         },
         "ProfilePhase2Duration": {
-            "displayText": "Phase 2\nDuration",
+            "displayText": "Phase 2 Duration",
             "description": ""
         },
         "ProfilePhase3Temp": {
-            "displayText": "Phase 3\nTemp",
+            "displayText": "Phase 3 Temp",
             "description": ""
         },
         "ProfilePhase3Duration": {
-            "displayText": "Phase 3\nDuration",
+            "displayText": "Phase 3 Duration",
             "description": ""
         },
         "ProfilePhase4Temp": {
-            "displayText": "Phase 4\nTemp",
+            "displayText": "Phase 4 Temp",
             "description": ""
         },
         "ProfilePhase4Duration": {
-            "displayText": "Phase 4\nDuration",
+            "displayText": "Phase 4 Duration",
             "description": ""
         },
         "ProfilePhase5Temp": {
-            "displayText": "Phase 5\nTemp",
+            "displayText": "Phase 5 Temp",
             "description": ""
         },
         "ProfilePhase5Duration": {
-            "displayText": "Phase 5\nDuration",
+            "displayText": "Phase 5 Duration",
             "description": ""
         },
         "ProfileCooldownSpeed": {
-            "displayText": "Cooldown\nSpeed",
+            "displayText": "Cooldown Speed",
             "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
diff --git a/Translations/translation_ZH_CN.json b/Translations/translation_ZH_CN.json
index a4c8bbb4..de08f696 100644
--- a/Translations/translation_ZH_CN.json
+++ b/Translations/translation_ZH_CN.json
@@ -61,16 +61,16 @@
             "message": "关"
         },
         "ProfilePreheatString": {
-            "message": "Preheat\n"
+            "message": "Preheat"
         },
         "ProfileCooldownString": {
-            "message": "Cooldown\n"
+            "message": "Cooldown"
         },
         "DeviceFailedValidationWarning": {
             "message": "这支电烙铁很有可能是冒牌货！"
         },
         "TooHotToStartProfileWarning": {
-            "message": "Too hot to\nstart profile"
+            "message": "Too hot to start profile"
         }
     },
     "characters": {
@@ -153,59 +153,59 @@
             "description": "焊接模式时，同时长按两个按键启用按键锁定 <无=禁用 | 增=只容许增热模式 | 全=完全锁定>"
         },
         "ProfilePhases": {
-            "displayText": "Profile\nPhases",
+            "displayText": "Profile Phases",
             "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
-            "displayText": "Preheat\nTemp",
+            "displayText": "Preheat Temp",
             "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
-            "displayText": "Preheat\nSpeed",
+            "displayText": "Preheat Speed",
             "description": "Preheat at this rate (degrees per second)"
         },
         "ProfilePhase1Temp": {
-            "displayText": "Phase 1\nTemp",
+            "displayText": "Phase 1 Temp",
             "description": "Target temperature for the end of this phase"
         },
         "ProfilePhase1Duration": {
-            "displayText": "Phase 1\nDuration",
+            "displayText": "Phase 1 Duration",
             "description": "Target duration of this phase (seconds)"
         },
         "ProfilePhase2Temp": {
-            "displayText": "Phase 2\nTemp",
+            "displayText": "Phase 2 Temp",
             "description": ""
         },
         "ProfilePhase2Duration": {
-            "displayText": "Phase 2\nDuration",
+            "displayText": "Phase 2 Duration",
             "description": ""
         },
         "ProfilePhase3Temp": {
-            "displayText": "Phase 3\nTemp",
+            "displayText": "Phase 3 Temp",
             "description": ""
         },
         "ProfilePhase3Duration": {
-            "displayText": "Phase 3\nDuration",
+            "displayText": "Phase 3 Duration",
             "description": ""
         },
         "ProfilePhase4Temp": {
-            "displayText": "Phase 4\nTemp",
+            "displayText": "Phase 4 Temp",
             "description": ""
         },
         "ProfilePhase4Duration": {
-            "displayText": "Phase 4\nDuration",
+            "displayText": "Phase 4 Duration",
             "description": ""
         },
         "ProfilePhase5Temp": {
-            "displayText": "Phase 5\nTemp",
+            "displayText": "Phase 5 Temp",
             "description": ""
         },
         "ProfilePhase5Duration": {
-            "displayText": "Phase 5\nDuration",
+            "displayText": "Phase 5 Duration",
             "description": ""
         },
         "ProfileCooldownSpeed": {
-            "displayText": "Cooldown\nSpeed",
+            "displayText": "Cooldown Speed",
             "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
diff --git a/Translations/translation_ZH_TW.json b/Translations/translation_ZH_TW.json
index ec0ec2e3..1094e3aa 100644
--- a/Translations/translation_ZH_TW.json
+++ b/Translations/translation_ZH_TW.json
@@ -61,16 +61,16 @@
             "message": "關"
         },
         "ProfilePreheatString": {
-            "message": "Preheat\n"
+            "message": "Preheat"
         },
         "ProfileCooldownString": {
-            "message": "Cooldown\n"
+            "message": "Cooldown"
         },
         "DeviceFailedValidationWarning": {
             "message": "這支電烙鐵很有可能是冒牌貨！"
         },
         "TooHotToStartProfileWarning": {
-            "message": "Too hot to\nstart profile"
+            "message": "Too hot to start profile"
         }
     },
     "characters": {
@@ -153,59 +153,59 @@
             "description": "於焊接模式時，同時長按兩個按鍵啟用按鍵鎖定 <無=停用 | 增=只容許增熱模式 | 全=鎖定全部>"
         },
         "ProfilePhases": {
-            "displayText": "Profile\nPhases",
+            "displayText": "Profile Phases",
             "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
-            "displayText": "Preheat\nTemp",
+            "displayText": "Preheat Temp",
             "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
-            "displayText": "Preheat\nSpeed",
+            "displayText": "Preheat Speed",
             "description": "Preheat at this rate (degrees per second)"
         },
         "ProfilePhase1Temp": {
-            "displayText": "Phase 1\nTemp",
+            "displayText": "Phase 1 Temp",
             "description": "Target temperature for the end of this phase"
         },
         "ProfilePhase1Duration": {
-            "displayText": "Phase 1\nDuration",
+            "displayText": "Phase 1 Duration",
             "description": "Target duration of this phase (seconds)"
         },
         "ProfilePhase2Temp": {
-            "displayText": "Phase 2\nTemp",
+            "displayText": "Phase 2 Temp",
             "description": ""
         },
         "ProfilePhase2Duration": {
-            "displayText": "Phase 2\nDuration",
+            "displayText": "Phase 2 Duration",
             "description": ""
         },
         "ProfilePhase3Temp": {
-            "displayText": "Phase 3\nTemp",
+            "displayText": "Phase 3 Temp",
             "description": ""
         },
         "ProfilePhase3Duration": {
-            "displayText": "Phase 3\nDuration",
+            "displayText": "Phase 3 Duration",
             "description": ""
         },
         "ProfilePhase4Temp": {
-            "displayText": "Phase 4\nTemp",
+            "displayText": "Phase 4 Temp",
             "description": ""
         },
         "ProfilePhase4Duration": {
-            "displayText": "Phase 4\nDuration",
+            "displayText": "Phase 4 Duration",
             "description": ""
         },
         "ProfilePhase5Temp": {
-            "displayText": "Phase 5\nTemp",
+            "displayText": "Phase 5 Temp",
             "description": ""
         },
         "ProfilePhase5Duration": {
-            "displayText": "Phase 5\nDuration",
+            "displayText": "Phase 5 Duration",
             "description": ""
         },
         "ProfileCooldownSpeed": {
-            "displayText": "Cooldown\nSpeed",
+            "displayText": "Cooldown Speed",
             "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {