sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity

Cleanup more unrequired logic

Browse Source
This commit is contained in:
Ben V. Brown
2020-07-28 22:27:14 +10:00
parent b6ee4207dd
commit d68eb95f50
4 changed files with 15 additions and 30 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
workspace/TS100/Core/BSP/Miniware/Software_I2C.h
View File

@@ -18,7 +18,7 @@
#define SOFT_SDA_LOW() HAL_GPIO_WritePin(SDA2_GPIO_Port, SDA2_Pin, GPIO_PIN_RESET)
#define SOFT_SDA_READ() (HAL_GPIO_ReadPin(SDA2_GPIO_Port,SDA2_Pin)==GPIO_PIN_SET?1:0)
#define SOFT_SCL_READ() (HAL_GPIO_ReadPin(SCL2_GPIO_Port,SCL2_Pin)==GPIO_PIN_SET?1:0)
#define SOFT_I2C_DELAY() {for(int xx=0;xx<100;xx++){asm("nop");}}
#define SOFT_I2C_DELAY() {for(int xx=0;xx<40;xx++){asm("nop");}}
#endif

14
workspace/TS100/Core/BSP/Miniware/fusb302b.cpp
View File

@@ -149,7 +149,7 @@ void fusb_setup() {
GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
GPIO_InitStruct.Pull = GPIO_PULLUP;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
HAL_NVIC_SetPriority(EXTI9_5_IRQn, 10, 0);
HAL_NVIC_SetPriority(EXTI9_5_IRQn, 12, 0);
HAL_NVIC_EnableIRQ(EXTI9_5_IRQn);
if (xTaskGetSchedulerState() != taskSCHEDULER_NOT_STARTED) {
@@ -157,12 +157,10 @@ void fusb_setup() {
return;
}
}
/* Fully reset the FUSB302B */
fusb_write_byte( FUSB_RESET, FUSB_RESET_SW_RES);
osDelay(2);
if (!fusb_read_id()) {
return;
}
/* Turn on all power */
fusb_write_byte( FUSB_POWER, 0x0F);
@@ -181,21 +179,14 @@ void fusb_setup() {
fusb_write_byte( FUSB_CONTROL1,
FUSB_CONTROL1_RX_FLUSH | FUSB_CONTROL1_ENSOP2 | FUSB_CONTROL1_ENSOP1);
resetWatchdog();
/* Measure CC1 */
fusb_write_byte( FUSB_SWITCHES0, 0x07);
resetWatchdog();
osDelay(10);
resetWatchdog();
uint8_t cc1 = fusb_read_byte( FUSB_STATUS0) & FUSB_STATUS0_BC_LVL;
resetWatchdog();
/* Measure CC2 */
resetWatchdog();
fusb_write_byte( FUSB_SWITCHES0, 0x0B);
resetWatchdog();
osDelay(10);
resetWatchdog();
uint8_t cc2 = fusb_read_byte( FUSB_STATUS0) & FUSB_STATUS0_BC_LVL;
/* Select the correct CC line for BMC signaling; also enable AUTO_CRC */
@@ -206,7 +197,6 @@ void fusb_setup() {
fusb_write_byte( FUSB_SWITCHES1, 0x26);
fusb_write_byte( FUSB_SWITCHES0, 0x0B);
}
resetWatchdog();
if (xTaskGetSchedulerState() != taskSCHEDULER_NOT_STARTED) {
I2CBB::unlock2();
}

22
workspace/TS100/Core/Drivers/FUSB302/policy_engine.cpp
View File

@@ -171,7 +171,7 @@ PolicyEngine::policy_engine_state PolicyEngine::pe_sink_wait_cap() {
}
/* If we got reset signaling, transition to default */
if (evt & PDB_EVT_PE_RESET) {
return PESinkTransitionDefault;
return PESinkWaitCap;
}
/* If we're too hot, we shouldn't negotiate power yet */
if (evt & PDB_EVT_PE_I_OVRTEMP) {
@@ -187,22 +187,22 @@ PolicyEngine::policy_engine_state PolicyEngine::pe_sink_wait_cap() {
&& PD_NUMOBJ_GET(&tempMessage) > 0) {
/* First, determine what PD revision we're using */
if ((hdr_template & PD_HDR_SPECREV) == PD_SPECREV_1_0) {
/* If the other end is using at least version 3.0, we'll
* use version 3.0. */
if ((tempMessage.hdr & PD_HDR_SPECREV) >= PD_SPECREV_3_0) {
hdr_template |= PD_SPECREV_3_0;
/* Otherwise, use 2.0. Don't worry about the 1.0 case
* because we don't have hardware for PD 1.0 signaling. */
} else {
hdr_template |= PD_SPECREV_2_0;
}
// /* If the other end is using at least version 3.0, we'll
// * use version 3.0. */
// if ((tempMessage.hdr & PD_HDR_SPECREV) >= PD_SPECREV_3_0) {
// hdr_template |= PD_SPECREV_3_0;
// /* Otherwise, use 2.0. Don't worry about the 1.0 case
// * because we don't have hardware for PD 1.0 signaling. */
// } else {
hdr_template |= PD_SPECREV_2_0;
// }
}
return PESinkEvalCap;
/* If the message was a Soft_Reset, do the soft reset procedure */
}
evt = 0;
}
return PESinkWaitCap; //unknown message == soft reset
return PESinkWaitCap; //wait for more messages?
}

7
workspace/TS100/Core/Drivers/I2CBB.cpp
View File

@@ -27,12 +27,7 @@ void I2CBB::init() {
I2CSemaphore2 = xSemaphoreCreateBinaryStatic(&xSemaphoreBuffer2);
unlock();
unlock2();
//unstick bus
// start();
// for (int i = 0; i < 8; i++) {
// read_bit();
// }
// stop();
}
bool I2CBB::probe(uint8_t address) {