sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity

Update FreeRTOS

Browse Source
This commit is contained in:
Ben V. Brown
2022-10-22 10:57:56 +11:00
parent 6c69c2e241
commit d5f33814aa
33 changed files with 20339 additions and 16800 deletions
Download Patch File Download Diff File Expand all files Collapse all files

101
source/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c vendored
View File

@@ -548,107 +548,6 @@ osStatus osTimerDelete(osTimerId timer_id)
return result;
}
/*************************** Signal Management ********************************/
/**
* @brief Set the specified Signal Flags of an active thread.
* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
* @param signals specifies the signal flags of the thread that should be set.
* @retval previous signal flags of the specified thread or 0x80000000 in case of incorrect parameters.
* @note MUST REMAIN UNCHANGED: \b osSignalSet shall be consistent in every CMSIS-RTOS.
*/
int32_t osSignalSet(osThreadId thread_id, int32_t signal)
{
#if (configUSE_TASK_NOTIFICATIONS == 1)
BaseType_t xHigherPriorityTaskWoken = pdFALSE;
uint32_t ulPreviousNotificationValue = 0;
if (inHandlerMode())
{
if (xTaskGenericNotifyFromISR(thread_id, (uint32_t)signal, eSetBits, &ulPreviousNotificationValue, &xHigherPriorityTaskWoken) != pdPASS)
return 0x80000000;
portYIELD_FROM_ISR(xHigherPriorityTaskWoken);
}
else if (xTaskGenericNotify(thread_id, (uint32_t)signal, eSetBits, &ulPreviousNotificationValue) != pdPASS)
return 0x80000000;
return ulPreviousNotificationValue;
#else
(void)thread_id;
(void)signal;
return 0x80000000; /* Task Notification not supported */
#endif
}
/**
* @brief Clear the specified Signal Flags of an active thread.
* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
* @param signals specifies the signal flags of the thread that shall be cleared.
* @retval previous signal flags of the specified thread or 0x80000000 in case of incorrect parameters.
* @note MUST REMAIN UNCHANGED: \b osSignalClear shall be consistent in every CMSIS-RTOS.
*/
int32_t osSignalClear(osThreadId thread_id, int32_t signal);
/**
* @brief Wait for one or more Signal Flags to become signaled for the current \b RUNNING thread.
* @param signals wait until all specified signal flags set or 0 for any single signal flag.
* @param millisec timeout value or 0 in case of no time-out.
* @retval event flag information or error code.
* @note MUST REMAIN UNCHANGED: \b osSignalWait shall be consistent in every CMSIS-RTOS.
*/
osEvent osSignalWait(int32_t signals, uint32_t millisec)
{
osEvent ret;
#if (configUSE_TASK_NOTIFICATIONS == 1)
TickType_t ticks;
ret.value.signals = 0;
ticks = 0;
if (millisec == osWaitForever)
{
ticks = portMAX_DELAY;
}
else if (millisec != 0)
{
ticks = millisec / portTICK_PERIOD_MS;
if (ticks == 0)
{
ticks = 1;
}
}
if (inHandlerMode())
{
ret.status = osErrorISR; /*Not allowed in ISR*/
}
else
{
if (xTaskNotifyWait(0, (uint32_t)signals, (uint32_t *)&ret.value.signals, ticks) != pdTRUE)
{
if (ticks == 0)
ret.status = osOK;
else
ret.status = osEventTimeout;
}
else if (ret.value.signals < 0)
{
ret.status = osErrorValue;
}
else
ret.status = osEventSignal;
}
#else
(void)signals;
(void)millisec;
ret.status = osErrorOS; /* Task Notification not supported */
#endif
return ret;
}
/**************************** Mutex Management ********************************/
/**

470
source/Middlewares/Third_Party/FreeRTOS/Source/croutine.c vendored
View File

@@ -1,5 +1,5 @@
/*
* FreeRTOS Kernel V10.3.1
* FreeRTOS Kernel V10.4.1
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
@@ -19,10 +19,9 @@
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
* 1 tab == 4 spaces!
*/
#include "FreeRTOS.h"
@@ -30,32 +29,32 @@
#include "croutine.h"
/* Remove the whole file is co-routines are not being used. */
#if( configUSE_CO_ROUTINES != 0 )
#if ( configUSE_CO_ROUTINES != 0 )
/*
* Some kernel aware debuggers require data to be viewed to be global, rather
* than file scope.
*/
#ifdef portREMOVE_STATIC_QUALIFIER
#define static
#endif
#ifdef portREMOVE_STATIC_QUALIFIER
#define static
#endif
/* Lists for ready and blocked co-routines. --------------------*/
static List_t pxReadyCoRoutineLists[ configMAX_CO_ROUTINE_PRIORITIES ]; /*< Prioritised ready co-routines. */
static List_t xDelayedCoRoutineList1; /*< Delayed co-routines. */
static List_t xDelayedCoRoutineList2; /*< Delayed co-routines (two lists are used - one for delays that have overflowed the current tick count. */
static List_t * pxDelayedCoRoutineList; /*< Points to the delayed co-routine list currently being used. */
static List_t * pxOverflowDelayedCoRoutineList; /*< Points to the delayed co-routine list currently being used to hold co-routines that have overflowed the current tick count. */
static List_t xPendingReadyCoRoutineList; /*< Holds co-routines that have been readied by an external event. They cannot be added directly to the ready lists as the ready lists cannot be accessed by interrupts. */
static List_t pxReadyCoRoutineLists[ configMAX_CO_ROUTINE_PRIORITIES ]; /*< Prioritised ready co-routines. */
static List_t xDelayedCoRoutineList1; /*< Delayed co-routines. */
static List_t xDelayedCoRoutineList2; /*< Delayed co-routines (two lists are used - one for delays that have overflowed the current tick count. */
static List_t * pxDelayedCoRoutineList = NULL; /*< Points to the delayed co-routine list currently being used. */
static List_t * pxOverflowDelayedCoRoutineList = NULL; /*< Points to the delayed co-routine list currently being used to hold co-routines that have overflowed the current tick count. */
static List_t xPendingReadyCoRoutineList; /*< Holds co-routines that have been readied by an external event. They cannot be added directly to the ready lists as the ready lists cannot be accessed by interrupts. */
/* Other file private variables. --------------------------------*/
CRCB_t * pxCurrentCoRoutine = NULL;
static UBaseType_t uxTopCoRoutineReadyPriority = 0;
static TickType_t xCoRoutineTickCount = 0, xLastTickCount = 0, xPassedTicks = 0;
CRCB_t * pxCurrentCoRoutine = NULL;
static UBaseType_t uxTopCoRoutineReadyPriority = 0;
static TickType_t xCoRoutineTickCount = 0, xLastTickCount = 0, xPassedTicks = 0;
/* The initial state of the co-routine when it is created. */
#define corINITIAL_STATE ( 0 )
#define corINITIAL_STATE ( 0 )
/*
* Place the co-routine represented by pxCRCB into the appropriate ready queue
@@ -64,20 +63,20 @@ static TickType_t xCoRoutineTickCount = 0, xLastTickCount = 0, xPassedTicks = 0;
* This macro accesses the co-routine ready lists and therefore must not be
* used from within an ISR.
*/
#define prvAddCoRoutineToReadyQueue( pxCRCB ) \
{ \
if( pxCRCB->uxPriority > uxTopCoRoutineReadyPriority ) \
{ \
uxTopCoRoutineReadyPriority = pxCRCB->uxPriority; \
} \
vListInsertEnd( ( List_t * ) &( pxReadyCoRoutineLists[ pxCRCB->uxPriority ] ), &( pxCRCB->xGenericListItem ) ); \
}
#define prvAddCoRoutineToReadyQueue( pxCRCB ) \
{ \
if( pxCRCB->uxPriority > uxTopCoRoutineReadyPriority ) \
{ \
uxTopCoRoutineReadyPriority = pxCRCB->uxPriority; \
} \
vListInsertEnd( ( List_t * ) &( pxReadyCoRoutineLists[ pxCRCB->uxPriority ] ), &( pxCRCB->xGenericListItem ) ); \
}
/*
* Utility to ready all the lists used by the scheduler. This is called
* automatically upon the creation of the first co-routine.
*/
static void prvInitialiseCoRoutineLists( void );
static void prvInitialiseCoRoutineLists( void );
/*
* Co-routines that are readied by an interrupt cannot be placed directly into
@@ -85,7 +84,7 @@ static void prvInitialiseCoRoutineLists( void );
* in the pending ready list in order that they can later be moved to the ready
* list by the co-routine scheduler.
*/
static void prvCheckPendingReadyList( void );
static void prvCheckPendingReadyList( void );
/*
* Macro that looks at the list of co-routines that are currently delayed to
@@ -95,259 +94,268 @@ static void prvCheckPendingReadyList( void );
* meaning once one co-routine has been found whose timer has not expired
* we need not look any further down the list.
*/
static void prvCheckDelayedList( void );
static void prvCheckDelayedList( void );
/*-----------------------------------------------------------*/
BaseType_t xCoRoutineCreate( crCOROUTINE_CODE pxCoRoutineCode, UBaseType_t uxPriority, UBaseType_t uxIndex )
{
BaseType_t xReturn;
CRCB_t *pxCoRoutine;
BaseType_t xCoRoutineCreate( crCOROUTINE_CODE pxCoRoutineCode,
UBaseType_t uxPriority,
UBaseType_t uxIndex )
{
BaseType_t xReturn;
CRCB_t * pxCoRoutine;
/* Allocate the memory that will store the co-routine control block. */
pxCoRoutine = ( CRCB_t * ) pvPortMalloc( sizeof( CRCB_t ) );
if( pxCoRoutine )
{
/* If pxCurrentCoRoutine is NULL then this is the first co-routine to
be created and the co-routine data structures need initialising. */
if( pxCurrentCoRoutine == NULL )
{
pxCurrentCoRoutine = pxCoRoutine;
prvInitialiseCoRoutineLists();
}
/* Allocate the memory that will store the co-routine control block. */
pxCoRoutine = ( CRCB_t * ) pvPortMalloc( sizeof( CRCB_t ) );
/* Check the priority is within limits. */
if( uxPriority >= configMAX_CO_ROUTINE_PRIORITIES )
{
uxPriority = configMAX_CO_ROUTINE_PRIORITIES - 1;
}
if( pxCoRoutine )
{
/* If pxCurrentCoRoutine is NULL then this is the first co-routine to
* be created and the co-routine data structures need initialising. */
if( pxCurrentCoRoutine == NULL )
{
pxCurrentCoRoutine = pxCoRoutine;
prvInitialiseCoRoutineLists();
}
/* Fill out the co-routine control block from the function parameters. */
pxCoRoutine->uxState = corINITIAL_STATE;
pxCoRoutine->uxPriority = uxPriority;
pxCoRoutine->uxIndex = uxIndex;
pxCoRoutine->pxCoRoutineFunction = pxCoRoutineCode;
/* Check the priority is within limits. */
if( uxPriority >= configMAX_CO_ROUTINE_PRIORITIES )
{
uxPriority = configMAX_CO_ROUTINE_PRIORITIES - 1;
}
/* Initialise all the other co-routine control block parameters. */
vListInitialiseItem( &( pxCoRoutine->xGenericListItem ) );
vListInitialiseItem( &( pxCoRoutine->xEventListItem ) );
/* Fill out the co-routine control block from the function parameters. */
pxCoRoutine->uxState = corINITIAL_STATE;
pxCoRoutine->uxPriority = uxPriority;
pxCoRoutine->uxIndex = uxIndex;
pxCoRoutine->pxCoRoutineFunction = pxCoRoutineCode;
/* Set the co-routine control block as a link back from the ListItem_t.
This is so we can get back to the containing CRCB from a generic item
in a list. */
listSET_LIST_ITEM_OWNER( &( pxCoRoutine->xGenericListItem ), pxCoRoutine );
listSET_LIST_ITEM_OWNER( &( pxCoRoutine->xEventListItem ), pxCoRoutine );
/* Initialise all the other co-routine control block parameters. */
vListInitialiseItem( &( pxCoRoutine->xGenericListItem ) );
vListInitialiseItem( &( pxCoRoutine->xEventListItem ) );
/* Event lists are always in priority order. */
listSET_LIST_ITEM_VALUE( &( pxCoRoutine->xEventListItem ), ( ( TickType_t ) configMAX_CO_ROUTINE_PRIORITIES - ( TickType_t ) uxPriority ) );
/* Set the co-routine control block as a link back from the ListItem_t.
* This is so we can get back to the containing CRCB from a generic item
* in a list. */
listSET_LIST_ITEM_OWNER( &( pxCoRoutine->xGenericListItem ), pxCoRoutine );
listSET_LIST_ITEM_OWNER( &( pxCoRoutine->xEventListItem ), pxCoRoutine );
/* Now the co-routine has been initialised it can be added to the ready
list at the correct priority. */
prvAddCoRoutineToReadyQueue( pxCoRoutine );
/* Event lists are always in priority order. */
listSET_LIST_ITEM_VALUE( &( pxCoRoutine->xEventListItem ), ( ( TickType_t ) configMAX_CO_ROUTINE_PRIORITIES - ( TickType_t ) uxPriority ) );
xReturn = pdPASS;
}
else
{
xReturn = errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY;
}
/* Now the co-routine has been initialised it can be added to the ready
* list at the correct priority. */
prvAddCoRoutineToReadyQueue( pxCoRoutine );
return xReturn;
}
xReturn = pdPASS;
}
else
{
xReturn = errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY;
}
return xReturn;
}
/*-----------------------------------------------------------*/
void vCoRoutineAddToDelayedList( TickType_t xTicksToDelay, List_t *pxEventList )
{
TickType_t xTimeToWake;
void vCoRoutineAddToDelayedList( TickType_t xTicksToDelay,
List_t * pxEventList )
{
TickType_t xTimeToWake;
/* Calculate the time to wake - this may overflow but this is
not a problem. */
xTimeToWake = xCoRoutineTickCount + xTicksToDelay;
/* Calculate the time to wake - this may overflow but this is
* not a problem. */
xTimeToWake = xCoRoutineTickCount + xTicksToDelay;
/* We must remove ourselves from the ready list before adding
ourselves to the blocked list as the same list item is used for
both lists. */
( void ) uxListRemove( ( ListItem_t * ) &( pxCurrentCoRoutine->xGenericListItem ) );
/* We must remove ourselves from the ready list before adding
* ourselves to the blocked list as the same list item is used for
* both lists. */
( void ) uxListRemove( ( ListItem_t * ) &( pxCurrentCoRoutine->xGenericListItem ) );
/* The list item will be inserted in wake time order. */
listSET_LIST_ITEM_VALUE( &( pxCurrentCoRoutine->xGenericListItem ), xTimeToWake );
/* The list item will be inserted in wake time order. */
listSET_LIST_ITEM_VALUE( &( pxCurrentCoRoutine->xGenericListItem ), xTimeToWake );
if( xTimeToWake < xCoRoutineTickCount )
{
/* Wake time has overflowed. Place this item in the
overflow list. */
vListInsert( ( List_t * ) pxOverflowDelayedCoRoutineList, ( ListItem_t * ) &( pxCurrentCoRoutine->xGenericListItem ) );
}
else
{
/* The wake time has not overflowed, so we can use the
current block list. */
vListInsert( ( List_t * ) pxDelayedCoRoutineList, ( ListItem_t * ) &( pxCurrentCoRoutine->xGenericListItem ) );
}
if( xTimeToWake < xCoRoutineTickCount )
{
/* Wake time has overflowed. Place this item in the
* overflow list. */
vListInsert( ( List_t * ) pxOverflowDelayedCoRoutineList, ( ListItem_t * ) &( pxCurrentCoRoutine->xGenericListItem ) );
}
else
{
/* The wake time has not overflowed, so we can use the
* current block list. */
vListInsert( ( List_t * ) pxDelayedCoRoutineList, ( ListItem_t * ) &( pxCurrentCoRoutine->xGenericListItem ) );
}
if( pxEventList )
{
/* Also add the co-routine to an event list. If this is done then the
function must be called with interrupts disabled. */
vListInsert( pxEventList, &( pxCurrentCoRoutine->xEventListItem ) );
}
}
if( pxEventList )
{
/* Also add the co-routine to an event list. If this is done then the
* function must be called with interrupts disabled. */
vListInsert( pxEventList, &( pxCurrentCoRoutine->xEventListItem ) );
}
}
/*-----------------------------------------------------------*/
static void prvCheckPendingReadyList( void )
{
/* Are there any co-routines waiting to get moved to the ready list? These
are co-routines that have been readied by an ISR. The ISR cannot access
the ready lists itself. */
while( listLIST_IS_EMPTY( &xPendingReadyCoRoutineList ) == pdFALSE )
{
CRCB_t *pxUnblockedCRCB;
static void prvCheckPendingReadyList( void )
{
/* Are there any co-routines waiting to get moved to the ready list? These
* are co-routines that have been readied by an ISR. The ISR cannot access
* the ready lists itself. */
while( listLIST_IS_EMPTY( &xPendingReadyCoRoutineList ) == pdFALSE )
{
CRCB_t * pxUnblockedCRCB;
/* The pending ready list can be accessed by an ISR. */
portDISABLE_INTERRUPTS();
{
pxUnblockedCRCB = ( CRCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( (&xPendingReadyCoRoutineList) );
( void ) uxListRemove( &( pxUnblockedCRCB->xEventListItem ) );
}
portENABLE_INTERRUPTS();
/* The pending ready list can be accessed by an ISR. */
portDISABLE_INTERRUPTS();
{
pxUnblockedCRCB = ( CRCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( ( &xPendingReadyCoRoutineList ) );
( void ) uxListRemove( &( pxUnblockedCRCB->xEventListItem ) );
}
portENABLE_INTERRUPTS();
( void ) uxListRemove( &( pxUnblockedCRCB->xGenericListItem ) );
prvAddCoRoutineToReadyQueue( pxUnblockedCRCB );
}
}
( void ) uxListRemove( &( pxUnblockedCRCB->xGenericListItem ) );
prvAddCoRoutineToReadyQueue( pxUnblockedCRCB );
}
}
/*-----------------------------------------------------------*/
static void prvCheckDelayedList( void )
{
CRCB_t *pxCRCB;
static void prvCheckDelayedList( void )
{
CRCB_t * pxCRCB;
xPassedTicks = xTaskGetTickCount() - xLastTickCount;
while( xPassedTicks )
{
xCoRoutineTickCount++;
xPassedTicks--;
xPassedTicks = xTaskGetTickCount() - xLastTickCount;
/* If the tick count has overflowed we need to swap the ready lists. */
if( xCoRoutineTickCount == 0 )
{
List_t * pxTemp;
while( xPassedTicks )
{
xCoRoutineTickCount++;
xPassedTicks--;
/* Tick count has overflowed so we need to swap the delay lists. If there are
any items in pxDelayedCoRoutineList here then there is an error! */
pxTemp = pxDelayedCoRoutineList;
pxDelayedCoRoutineList = pxOverflowDelayedCoRoutineList;
pxOverflowDelayedCoRoutineList = pxTemp;
}
/* If the tick count has overflowed we need to swap the ready lists. */
if( xCoRoutineTickCount == 0 )
{
List_t * pxTemp;
/* See if this tick has made a timeout expire. */
while( listLIST_IS_EMPTY( pxDelayedCoRoutineList ) == pdFALSE )
{
pxCRCB = ( CRCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxDelayedCoRoutineList );
/* Tick count has overflowed so we need to swap the delay lists. If there are
* any items in pxDelayedCoRoutineList here then there is an error! */
pxTemp = pxDelayedCoRoutineList;
pxDelayedCoRoutineList = pxOverflowDelayedCoRoutineList;
pxOverflowDelayedCoRoutineList = pxTemp;
}
if( xCoRoutineTickCount < listGET_LIST_ITEM_VALUE( &( pxCRCB->xGenericListItem ) ) )
{
/* Timeout not yet expired. */
break;
}
/* See if this tick has made a timeout expire. */
while( listLIST_IS_EMPTY( pxDelayedCoRoutineList ) == pdFALSE )
{
pxCRCB = ( CRCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxDelayedCoRoutineList );
portDISABLE_INTERRUPTS();
{
/* The event could have occurred just before this critical
section. If this is the case then the generic list item will
have been moved to the pending ready list and the following
line is still valid. Also the pvContainer parameter will have
been set to NULL so the following lines are also valid. */
( void ) uxListRemove( &( pxCRCB->xGenericListItem ) );
if( xCoRoutineTickCount < listGET_LIST_ITEM_VALUE( &( pxCRCB->xGenericListItem ) ) )
{
/* Timeout not yet expired. */
break;
}
/* Is the co-routine waiting on an event also? */
if( pxCRCB->xEventListItem.pxContainer )
{
( void ) uxListRemove( &( pxCRCB->xEventListItem ) );
}
}
portENABLE_INTERRUPTS();
portDISABLE_INTERRUPTS();
{
/* The event could have occurred just before this critical
* section. If this is the case then the generic list item will
* have been moved to the pending ready list and the following
* line is still valid. Also the pvContainer parameter will have
* been set to NULL so the following lines are also valid. */
( void ) uxListRemove( &( pxCRCB->xGenericListItem ) );
prvAddCoRoutineToReadyQueue( pxCRCB );
}
}
/* Is the co-routine waiting on an event also? */
if( pxCRCB->xEventListItem.pxContainer )
{
( void ) uxListRemove( &( pxCRCB->xEventListItem ) );
}
}
portENABLE_INTERRUPTS();
xLastTickCount = xCoRoutineTickCount;
}
prvAddCoRoutineToReadyQueue( pxCRCB );
}
}
xLastTickCount = xCoRoutineTickCount;
}
/*-----------------------------------------------------------*/
void vCoRoutineSchedule( void )
{
/* See if any co-routines readied by events need moving to the ready lists. */
prvCheckPendingReadyList();
void vCoRoutineSchedule( void )
{
/* Only run a co-routine after prvInitialiseCoRoutineLists() has been
* called. prvInitialiseCoRoutineLists() is called automatically when a
* co-routine is created. */
if( pxDelayedCoRoutineList != NULL )
{
/* See if any co-routines readied by events need moving to the ready lists. */
prvCheckPendingReadyList();
/* See if any delayed co-routines have timed out. */
prvCheckDelayedList();
/* See if any delayed co-routines have timed out. */
prvCheckDelayedList();
/* Find the highest priority queue that contains ready co-routines. */
while( listLIST_IS_EMPTY( &( pxReadyCoRoutineLists[ uxTopCoRoutineReadyPriority ] ) ) )
{
if( uxTopCoRoutineReadyPriority == 0 )
{
/* No more co-routines to check. */
return;
}
--uxTopCoRoutineReadyPriority;
}
/* Find the highest priority queue that contains ready co-routines. */
while( listLIST_IS_EMPTY( &( pxReadyCoRoutineLists[ uxTopCoRoutineReadyPriority ] ) ) )
{
if( uxTopCoRoutineReadyPriority == 0 )
{
/* No more co-routines to check. */
return;
}
/* listGET_OWNER_OF_NEXT_ENTRY walks through the list, so the co-routines
of the same priority get an equal share of the processor time. */
listGET_OWNER_OF_NEXT_ENTRY( pxCurrentCoRoutine, &( pxReadyCoRoutineLists[ uxTopCoRoutineReadyPriority ] ) );
--uxTopCoRoutineReadyPriority;
}
/* Call the co-routine. */
( pxCurrentCoRoutine->pxCoRoutineFunction )( pxCurrentCoRoutine, pxCurrentCoRoutine->uxIndex );
/* listGET_OWNER_OF_NEXT_ENTRY walks through the list, so the co-routines
* of the same priority get an equal share of the processor time. */
listGET_OWNER_OF_NEXT_ENTRY( pxCurrentCoRoutine, &( pxReadyCoRoutineLists[ uxTopCoRoutineReadyPriority ] ) );
return;
}
/* Call the co-routine. */
( pxCurrentCoRoutine->pxCoRoutineFunction )( pxCurrentCoRoutine, pxCurrentCoRoutine->uxIndex );
}
}
/*-----------------------------------------------------------*/
static void prvInitialiseCoRoutineLists( void )
{
UBaseType_t uxPriority;
static void prvInitialiseCoRoutineLists( void )
{
UBaseType_t uxPriority;
for( uxPriority = 0; uxPriority < configMAX_CO_ROUTINE_PRIORITIES; uxPriority++ )
{
vListInitialise( ( List_t * ) &( pxReadyCoRoutineLists[ uxPriority ] ) );
}
for( uxPriority = 0; uxPriority < configMAX_CO_ROUTINE_PRIORITIES; uxPriority++ )
{
vListInitialise( ( List_t * ) &( pxReadyCoRoutineLists[ uxPriority ] ) );
}
vListInitialise( ( List_t * ) &xDelayedCoRoutineList1 );
vListInitialise( ( List_t * ) &xDelayedCoRoutineList2 );
vListInitialise( ( List_t * ) &xPendingReadyCoRoutineList );
vListInitialise( ( List_t * ) &xDelayedCoRoutineList1 );
vListInitialise( ( List_t * ) &xDelayedCoRoutineList2 );
vListInitialise( ( List_t * ) &xPendingReadyCoRoutineList );
/* Start with pxDelayedCoRoutineList using list1 and the
pxOverflowDelayedCoRoutineList using list2. */
pxDelayedCoRoutineList = &xDelayedCoRoutineList1;
pxOverflowDelayedCoRoutineList = &xDelayedCoRoutineList2;
}
/* Start with pxDelayedCoRoutineList using list1 and the
* pxOverflowDelayedCoRoutineList using list2. */
pxDelayedCoRoutineList = &xDelayedCoRoutineList1;
pxOverflowDelayedCoRoutineList = &xDelayedCoRoutineList2;
}
/*-----------------------------------------------------------*/
BaseType_t xCoRoutineRemoveFromEventList( const List_t *pxEventList )
{
CRCB_t *pxUnblockedCRCB;
BaseType_t xReturn;
BaseType_t xCoRoutineRemoveFromEventList( const List_t * pxEventList )
{
CRCB_t * pxUnblockedCRCB;
BaseType_t xReturn;
/* This function is called from within an interrupt. It can only access
event lists and the pending ready list. This function assumes that a
check has already been made to ensure pxEventList is not empty. */
pxUnblockedCRCB = ( CRCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxEventList );
( void ) uxListRemove( &( pxUnblockedCRCB->xEventListItem ) );
vListInsertEnd( ( List_t * ) &( xPendingReadyCoRoutineList ), &( pxUnblockedCRCB->xEventListItem ) );
/* This function is called from within an interrupt. It can only access
* event lists and the pending ready list. This function assumes that a
* check has already been made to ensure pxEventList is not empty. */
pxUnblockedCRCB = ( CRCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxEventList );
( void ) uxListRemove( &( pxUnblockedCRCB->xEventListItem ) );
vListInsertEnd( ( List_t * ) &( xPendingReadyCoRoutineList ), &( pxUnblockedCRCB->xEventListItem ) );
if( pxUnblockedCRCB->uxPriority >= pxCurrentCoRoutine->uxPriority )
{
xReturn = pdTRUE;
}
else
{
xReturn = pdFALSE;
}
if( pxUnblockedCRCB->uxPriority >= pxCurrentCoRoutine->uxPriority )
{
xReturn = pdTRUE;
}
else
{
xReturn = pdFALSE;
}
return xReturn;
}
return xReturn;
}
#endif /* configUSE_CO_ROUTINES == 0 */

1110
source/Middlewares/Third_Party/FreeRTOS/Source/event_groups.c vendored
View File

File diff suppressed because it is too large Load Diff

960
source/Middlewares/Third_Party/FreeRTOS/Source/include/FreeRTOS.h vendored
View File

File diff suppressed because it is too large Load Diff

111
source/Middlewares/Third_Party/FreeRTOS/Source/include/StackMacros.h vendored
View File

@@ -1,5 +1,5 @@
/*
* FreeRTOS Kernel V10.3.1
* FreeRTOS Kernel V10.4.1
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
@@ -19,115 +19,14 @@
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
* 1 tab == 4 spaces!
*/
#ifndef STACK_MACROS_H
#define STACK_MACROS_H
#ifndef _MSC_VER /* Visual Studio doesn't support #warning. */
#warning The name of this file has changed to stack_macros.h. Please update your code accordingly. This source file (which has the original name) will be removed in future released.
#warning The name of this file has changed to stack_macros.h. Please update your code accordingly. This source file (which has the original name) will be removed in future released.
#endif
/*
* Call the stack overflow hook function if the stack of the task being swapped
* out is currently overflowed, or looks like it might have overflowed in the
* past.
*
* Setting configCHECK_FOR_STACK_OVERFLOW to 1 will cause the macro to check
* the current stack state only - comparing the current top of stack value to
* the stack limit. Setting configCHECK_FOR_STACK_OVERFLOW to greater than 1
* will also cause the last few stack bytes to be checked to ensure the value
* to which the bytes were set when the task was created have not been
* overwritten. Note this second test does not guarantee that an overflowed
* stack will always be recognised.
*/
/*-----------------------------------------------------------*/
#if( ( configCHECK_FOR_STACK_OVERFLOW == 1 ) && ( portSTACK_GROWTH < 0 ) )
/* Only the current stack state is to be checked. */
#define taskCHECK_FOR_STACK_OVERFLOW() \
{ \
/* Is the currently saved stack pointer within the stack limit? */ \
if( pxCurrentTCB->pxTopOfStack <= pxCurrentTCB->pxStack ) \
{ \
vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
} \
}
#endif /* configCHECK_FOR_STACK_OVERFLOW == 1 */
/*-----------------------------------------------------------*/
#if( ( configCHECK_FOR_STACK_OVERFLOW == 1 ) && ( portSTACK_GROWTH > 0 ) )
/* Only the current stack state is to be checked. */
#define taskCHECK_FOR_STACK_OVERFLOW() \
{ \
\
/* Is the currently saved stack pointer within the stack limit? */ \
if( pxCurrentTCB->pxTopOfStack >= pxCurrentTCB->pxEndOfStack ) \
{ \
vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
} \
}
#endif /* configCHECK_FOR_STACK_OVERFLOW == 1 */
/*-----------------------------------------------------------*/
#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH < 0 ) )
#define taskCHECK_FOR_STACK_OVERFLOW() \
{ \
const uint32_t * const pulStack = ( uint32_t * ) pxCurrentTCB->pxStack; \
const uint32_t ulCheckValue = ( uint32_t ) 0xa5a5a5a5; \
\
if( ( pulStack[ 0 ] != ulCheckValue ) || \
( pulStack[ 1 ] != ulCheckValue ) || \
( pulStack[ 2 ] != ulCheckValue ) || \
( pulStack[ 3 ] != ulCheckValue ) ) \
{ \
vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
} \
}
#endif /* #if( configCHECK_FOR_STACK_OVERFLOW > 1 ) */
/*-----------------------------------------------------------*/
#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH > 0 ) )
#define taskCHECK_FOR_STACK_OVERFLOW() \
{ \
int8_t *pcEndOfStack = ( int8_t * ) pxCurrentTCB->pxEndOfStack; \
static const uint8_t ucExpectedStackBytes[] = { tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE }; \
\
\
pcEndOfStack -= sizeof( ucExpectedStackBytes ); \
\
/* Has the extremity of the task stack ever been written over? */ \
if( memcmp( ( void * ) pcEndOfStack, ( void * ) ucExpectedStackBytes, sizeof( ucExpectedStackBytes ) ) != 0 ) \
{ \
vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
} \
}
#endif /* #if( configCHECK_FOR_STACK_OVERFLOW > 1 ) */
/*-----------------------------------------------------------*/
/* Remove stack overflow macro if not being used. */
#ifndef taskCHECK_FOR_STACK_OVERFLOW
#define taskCHECK_FOR_STACK_OVERFLOW()
#endif
#endif /* STACK_MACROS_H */
#include "stack_macros.h"

257
source/Middlewares/Third_Party/FreeRTOS/Source/include/atomic.h vendored
View File

@@ -1,5 +1,5 @@
/*
* FreeRTOS Kernel V10.3.1
* FreeRTOS Kernel V10.4.1
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
@@ -19,10 +19,9 @@
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
* 1 tab == 4 spaces!
*/
/**
@@ -38,15 +37,17 @@
#define ATOMIC_H
#ifndef INC_FREERTOS_H
#error "include FreeRTOS.h must appear in source files before include atomic.h"
#error "include FreeRTOS.h must appear in source files before include atomic.h"
#endif
/* Standard includes. */
#include <stdint.h>
/* *INDENT-OFF* */
#ifdef __cplusplus
extern "C" {
extern "C" {
#endif
/* *INDENT-ON* */
/*
* Port specific definitions -- entering/exiting critical section.
@@ -58,18 +59,18 @@ extern "C" {
*/
#if defined( portSET_INTERRUPT_MASK_FROM_ISR )
/* Nested interrupt scheme is supported in this port. */
#define ATOMIC_ENTER_CRITICAL() \
UBaseType_t uxCriticalSectionType = portSET_INTERRUPT_MASK_FROM_ISR()
/* Nested interrupt scheme is supported in this port. */
#define ATOMIC_ENTER_CRITICAL() \
UBaseType_t uxCriticalSectionType = portSET_INTERRUPT_MASK_FROM_ISR()
#define ATOMIC_EXIT_CRITICAL() \
portCLEAR_INTERRUPT_MASK_FROM_ISR( uxCriticalSectionType )
#define ATOMIC_EXIT_CRITICAL() \
portCLEAR_INTERRUPT_MASK_FROM_ISR( uxCriticalSectionType )
#else
/* Nested interrupt scheme is NOT supported in this port. */
#define ATOMIC_ENTER_CRITICAL() portENTER_CRITICAL()
#define ATOMIC_EXIT_CRITICAL() portEXIT_CRITICAL()
/* Nested interrupt scheme is NOT supported in this port. */
#define ATOMIC_ENTER_CRITICAL() portENTER_CRITICAL()
#define ATOMIC_EXIT_CRITICAL() portEXIT_CRITICAL()
#endif /* portSET_INTERRUPT_MASK_FROM_ISR() */
@@ -81,11 +82,11 @@ extern "C" {
* instead of resulting error, simply define it away.
*/
#ifndef portFORCE_INLINE
#define portFORCE_INLINE
#define portFORCE_INLINE
#endif
#define ATOMIC_COMPARE_AND_SWAP_SUCCESS 0x1U /**< Compare and swap succeeded, swapped. */
#define ATOMIC_COMPARE_AND_SWAP_FAILURE 0x0U /**< Compare and swap failed, did not swap. */
#define ATOMIC_COMPARE_AND_SWAP_SUCCESS 0x1U /**< Compare and swap succeeded, swapped. */
#define ATOMIC_COMPARE_AND_SWAP_FAILURE 0x0U /**< Compare and swap failed, did not swap. */
/*----------------------------- Swap && CAS ------------------------------*/
@@ -105,26 +106,26 @@ extern "C" {
* *pulDestination value equals ulComparand.
*/
static portFORCE_INLINE uint32_t Atomic_CompareAndSwap_u32( uint32_t volatile * pulDestination,
uint32_t ulExchange,
uint32_t ulComparand )
uint32_t ulExchange,
uint32_t ulComparand )
{
uint32_t ulReturnValue;
uint32_t ulReturnValue;
ATOMIC_ENTER_CRITICAL();
{
if( *pulDestination == ulComparand )
{
*pulDestination = ulExchange;
ulReturnValue = ATOMIC_COMPARE_AND_SWAP_SUCCESS;
}
else
{
ulReturnValue = ATOMIC_COMPARE_AND_SWAP_FAILURE;
}
}
ATOMIC_EXIT_CRITICAL();
ATOMIC_ENTER_CRITICAL();
{
if( *pulDestination == ulComparand )
{
*pulDestination = ulExchange;
ulReturnValue = ATOMIC_COMPARE_AND_SWAP_SUCCESS;
}
else
{
ulReturnValue = ATOMIC_COMPARE_AND_SWAP_FAILURE;
}
}
ATOMIC_EXIT_CRITICAL();
return ulReturnValue;
return ulReturnValue;
}
/*-----------------------------------------------------------*/
@@ -141,18 +142,18 @@ uint32_t ulReturnValue;
* @return The initial value of *ppvDestination.
*/
static portFORCE_INLINE void * Atomic_SwapPointers_p32( void * volatile * ppvDestination,
void * pvExchange )
void * pvExchange )
{
void * pReturnValue;
void * pReturnValue;
ATOMIC_ENTER_CRITICAL();
{
pReturnValue = *ppvDestination;
*ppvDestination = pvExchange;
}
ATOMIC_EXIT_CRITICAL();
ATOMIC_ENTER_CRITICAL();
{
pReturnValue = *ppvDestination;
*ppvDestination = pvExchange;
}
ATOMIC_EXIT_CRITICAL();
return pReturnValue;
return pReturnValue;
}
/*-----------------------------------------------------------*/
@@ -173,22 +174,22 @@ void * pReturnValue;
* *ppvDestination value equals pvComparand.
*/
static portFORCE_INLINE uint32_t Atomic_CompareAndSwapPointers_p32( void * volatile * ppvDestination,
void * pvExchange,
void * pvComparand )
void * pvExchange,
void * pvComparand )
{
uint32_t ulReturnValue = ATOMIC_COMPARE_AND_SWAP_FAILURE;
uint32_t ulReturnValue = ATOMIC_COMPARE_AND_SWAP_FAILURE;
ATOMIC_ENTER_CRITICAL();
{
if( *ppvDestination == pvComparand )
{
*ppvDestination = pvExchange;
ulReturnValue = ATOMIC_COMPARE_AND_SWAP_SUCCESS;
}
}
ATOMIC_EXIT_CRITICAL();
ATOMIC_ENTER_CRITICAL();
{
if( *ppvDestination == pvComparand )
{
*ppvDestination = pvExchange;
ulReturnValue = ATOMIC_COMPARE_AND_SWAP_SUCCESS;
}
}
ATOMIC_EXIT_CRITICAL();
return ulReturnValue;
return ulReturnValue;
}
@@ -206,18 +207,18 @@ uint32_t ulReturnValue = ATOMIC_COMPARE_AND_SWAP_FAILURE;
* @return previous *pulAddend value.
*/
static portFORCE_INLINE uint32_t Atomic_Add_u32( uint32_t volatile * pulAddend,
uint32_t ulCount )
uint32_t ulCount )
{
uint32_t ulCurrent;
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulAddend;
*pulAddend += ulCount;
}
ATOMIC_EXIT_CRITICAL();
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulAddend;
*pulAddend += ulCount;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
return ulCurrent;
}
/*-----------------------------------------------------------*/
@@ -234,18 +235,18 @@ static portFORCE_INLINE uint32_t Atomic_Add_u32( uint32_t volatile * pulAddend,
* @return previous *pulAddend value.
*/
static portFORCE_INLINE uint32_t Atomic_Subtract_u32( uint32_t volatile * pulAddend,
uint32_t ulCount )
uint32_t ulCount )
{
uint32_t ulCurrent;
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulAddend;
*pulAddend -= ulCount;
}
ATOMIC_EXIT_CRITICAL();
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulAddend;
*pulAddend -= ulCount;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
return ulCurrent;
}
/*-----------------------------------------------------------*/
@@ -261,16 +262,16 @@ static portFORCE_INLINE uint32_t Atomic_Subtract_u32( uint32_t volatile * pulAdd
*/
static portFORCE_INLINE uint32_t Atomic_Increment_u32( uint32_t volatile * pulAddend )
{
uint32_t ulCurrent;
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulAddend;
*pulAddend += 1;
}
ATOMIC_EXIT_CRITICAL();
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulAddend;
*pulAddend += 1;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
return ulCurrent;
}
/*-----------------------------------------------------------*/
@@ -286,16 +287,16 @@ uint32_t ulCurrent;
*/
static portFORCE_INLINE uint32_t Atomic_Decrement_u32( uint32_t volatile * pulAddend )
{
uint32_t ulCurrent;
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulAddend;
*pulAddend -= 1;
}
ATOMIC_EXIT_CRITICAL();
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulAddend;
*pulAddend -= 1;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
return ulCurrent;
}
/*----------------------------- Bitwise Logical ------------------------------*/
@@ -312,18 +313,18 @@ uint32_t ulCurrent;
* @return The original value of *pulDestination.
*/
static portFORCE_INLINE uint32_t Atomic_OR_u32( uint32_t volatile * pulDestination,
uint32_t ulValue )
uint32_t ulValue )
{
uint32_t ulCurrent;
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulDestination;
*pulDestination |= ulValue;
}
ATOMIC_EXIT_CRITICAL();
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulDestination;
*pulDestination |= ulValue;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
return ulCurrent;
}
/*-----------------------------------------------------------*/
@@ -339,18 +340,18 @@ uint32_t ulCurrent;
* @return The original value of *pulDestination.
*/
static portFORCE_INLINE uint32_t Atomic_AND_u32( uint32_t volatile * pulDestination,
uint32_t ulValue )
uint32_t ulValue )
{
uint32_t ulCurrent;
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulDestination;
*pulDestination &= ulValue;
}
ATOMIC_EXIT_CRITICAL();
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulDestination;
*pulDestination &= ulValue;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
return ulCurrent;
}
/*-----------------------------------------------------------*/
@@ -366,18 +367,18 @@ uint32_t ulCurrent;
* @return The original value of *pulDestination.
*/
static portFORCE_INLINE uint32_t Atomic_NAND_u32( uint32_t volatile * pulDestination,
uint32_t ulValue )
uint32_t ulValue )
{
uint32_t ulCurrent;
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulDestination;
*pulDestination = ~( ulCurrent & ulValue );
}
ATOMIC_EXIT_CRITICAL();
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulDestination;
*pulDestination = ~( ulCurrent & ulValue );
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
return ulCurrent;
}
/*-----------------------------------------------------------*/
@@ -393,22 +394,24 @@ uint32_t ulCurrent;
* @return The original value of *pulDestination.
*/
static portFORCE_INLINE uint32_t Atomic_XOR_u32( uint32_t volatile * pulDestination,
uint32_t ulValue )
uint32_t ulValue )
{
uint32_t ulCurrent;
uint32_t ulCurrent;
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulDestination;
*pulDestination ^= ulValue;
}
ATOMIC_EXIT_CRITICAL();
ATOMIC_ENTER_CRITICAL();
{
ulCurrent = *pulDestination;
*pulDestination ^= ulValue;
}
ATOMIC_EXIT_CRITICAL();
return ulCurrent;
return ulCurrent;
}
/* *INDENT-OFF* */
#ifdef __cplusplus
}
}
#endif
/* *INDENT-ON* */
#endif /* ATOMIC_H */

807
source/Middlewares/Third_Party/FreeRTOS/Source/include/croutine.h vendored
View File

@@ -1,5 +1,5 @@
/*
* FreeRTOS Kernel V10.3.1
* FreeRTOS Kernel V10.4.1
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
@@ -19,51 +19,54 @@
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
* 1 tab == 4 spaces!
*/
#ifndef CO_ROUTINE_H
#define CO_ROUTINE_H
#ifndef INC_FREERTOS_H
#error "include FreeRTOS.h must appear in source files before include croutine.h"
#error "include FreeRTOS.h must appear in source files before include croutine.h"
#endif
#include "list.h"
/* *INDENT-OFF* */
#ifdef __cplusplus
extern "C" {
extern "C" {
#endif
/* *INDENT-ON* */
/* Used to hide the implementation of the co-routine control block. The
control block structure however has to be included in the header due to
the macro implementation of the co-routine functionality. */
* control block structure however has to be included in the header due to
* the macro implementation of the co-routine functionality. */
typedef void * CoRoutineHandle_t;
/* Defines the prototype to which co-routine functions must conform. */
typedef void (*crCOROUTINE_CODE)( CoRoutineHandle_t, UBaseType_t );
typedef void (* crCOROUTINE_CODE)( CoRoutineHandle_t,
UBaseType_t );
typedef struct corCoRoutineControlBlock
{
crCOROUTINE_CODE pxCoRoutineFunction;
ListItem_t xGenericListItem; /*< List item used to place the CRCB in ready and blocked queues. */
ListItem_t xEventListItem; /*< List item used to place the CRCB in event lists. */
UBaseType_t uxPriority; /*< The priority of the co-routine in relation to other co-routines. */
UBaseType_t uxIndex; /*< Used to distinguish between co-routines when multiple co-routines use the same co-routine function. */
uint16_t uxState; /*< Used internally by the co-routine implementation. */
} CRCB_t; /* Co-routine control block. Note must be identical in size down to uxPriority with TCB_t. */
crCOROUTINE_CODE pxCoRoutineFunction;
ListItem_t xGenericListItem; /*< List item used to place the CRCB in ready and blocked queues. */
ListItem_t xEventListItem; /*< List item used to place the CRCB in event lists. */
UBaseType_t uxPriority; /*< The priority of the co-routine in relation to other co-routines. */
UBaseType_t uxIndex; /*< Used to distinguish between co-routines when multiple co-routines use the same co-routine function. */
uint16_t uxState; /*< Used internally by the co-routine implementation. */
} CRCB_t; /* Co-routine control block. Note must be identical in size down to uxPriority with TCB_t. */
/**
* croutine. h
*<pre>
BaseType_t xCoRoutineCreate(
crCOROUTINE_CODE pxCoRoutineCode,
UBaseType_t uxPriority,
UBaseType_t uxIndex
);</pre>
* <pre>
* BaseType_t xCoRoutineCreate(
* crCOROUTINE_CODE pxCoRoutineCode,
* UBaseType_t uxPriority,
* UBaseType_t uxIndex
* );
* </pre>
*
* Create a new co-routine and add it to the list of co-routines that are
* ready to run.
@@ -83,58 +86,61 @@ typedef struct corCoRoutineControlBlock
* list, otherwise an error code defined with ProjDefs.h.
*
* Example usage:
<pre>
// Co-routine to be created.
void vFlashCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
{
// Variables in co-routines must be declared static if they must maintain value across a blocking call.
// This may not be necessary for const variables.
static const char cLedToFlash[ 2 ] = { 5, 6 };
static const TickType_t uxFlashRates[ 2 ] = { 200, 400 };
// Must start every co-routine with a call to crSTART();
crSTART( xHandle );
for( ;; )
{
// This co-routine just delays for a fixed period, then toggles
// an LED. Two co-routines are created using this function, so
// the uxIndex parameter is used to tell the co-routine which
// LED to flash and how int32_t to delay. This assumes xQueue has
// already been created.
vParTestToggleLED( cLedToFlash[ uxIndex ] );
crDELAY( xHandle, uxFlashRates[ uxIndex ] );
}
// Must end every co-routine with a call to crEND();
crEND();
}
// Function that creates two co-routines.
void vOtherFunction( void )
{
uint8_t ucParameterToPass;
TaskHandle_t xHandle;
// Create two co-routines at priority 0. The first is given index 0
// so (from the code above) toggles LED 5 every 200 ticks. The second
// is given index 1 so toggles LED 6 every 400 ticks.
for( uxIndex = 0; uxIndex < 2; uxIndex++ )
{
xCoRoutineCreate( vFlashCoRoutine, 0, uxIndex );
}
}
</pre>
* <pre>
* // Co-routine to be created.
* void vFlashCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* // Variables in co-routines must be declared static if they must maintain value across a blocking call.
* // This may not be necessary for const variables.
* static const char cLedToFlash[ 2 ] = { 5, 6 };
* static const TickType_t uxFlashRates[ 2 ] = { 200, 400 };
*
* // Must start every co-routine with a call to crSTART();
* crSTART( xHandle );
*
* for( ;; )
* {
* // This co-routine just delays for a fixed period, then toggles
* // an LED. Two co-routines are created using this function, so
* // the uxIndex parameter is used to tell the co-routine which
* // LED to flash and how int32_t to delay. This assumes xQueue has
* // already been created.
* vParTestToggleLED( cLedToFlash[ uxIndex ] );
* crDELAY( xHandle, uxFlashRates[ uxIndex ] );
* }
*
* // Must end every co-routine with a call to crEND();
* crEND();
* }
*
* // Function that creates two co-routines.
* void vOtherFunction( void )
* {
* uint8_t ucParameterToPass;
* TaskHandle_t xHandle;
*
* // Create two co-routines at priority 0. The first is given index 0
* // so (from the code above) toggles LED 5 every 200 ticks. The second
* // is given index 1 so toggles LED 6 every 400 ticks.
* for( uxIndex = 0; uxIndex < 2; uxIndex++ )
* {
* xCoRoutineCreate( vFlashCoRoutine, 0, uxIndex );
* }
* }
* </pre>
* \defgroup xCoRoutineCreate xCoRoutineCreate
* \ingroup Tasks
*/
BaseType_t xCoRoutineCreate( crCOROUTINE_CODE pxCoRoutineCode, UBaseType_t uxPriority, UBaseType_t uxIndex );
BaseType_t xCoRoutineCreate( crCOROUTINE_CODE pxCoRoutineCode,
UBaseType_t uxPriority,
UBaseType_t uxIndex );
/**
* croutine. h
*<pre>
void vCoRoutineSchedule( void );</pre>
* <pre>
* void vCoRoutineSchedule( void );
* </pre>
*
* Run a co-routine.
*
@@ -148,25 +154,25 @@ BaseType_t xCoRoutineCreate( crCOROUTINE_CODE pxCoRoutineCode, UBaseType_t uxPri
* hook).
*
* Example usage:
<pre>
// This idle task hook will schedule a co-routine each time it is called.
// The rest of the idle task will execute between co-routine calls.
void vApplicationIdleHook( void )
{
vCoRoutineSchedule();
}
// Alternatively, if you do not require any other part of the idle task to
// execute, the idle task hook can call vCoRoutineSchedule() within an
// infinite loop.
void vApplicationIdleHook( void )
{
for( ;; )
{
vCoRoutineSchedule();
}
}
</pre>
* <pre>
* // This idle task hook will schedule a co-routine each time it is called.
* // The rest of the idle task will execute between co-routine calls.
* void vApplicationIdleHook( void )
* {
* vCoRoutineSchedule();
* }
*
* // Alternatively, if you do not require any other part of the idle task to
* // execute, the idle task hook can call vCoRoutineSchedule() within an
* // infinite loop.
* void vApplicationIdleHook( void )
* {
* for( ;; )
* {
* vCoRoutineSchedule();
* }
* }
* </pre>
* \defgroup vCoRoutineSchedule vCoRoutineSchedule
* \ingroup Tasks
*/
@@ -175,76 +181,87 @@ void vCoRoutineSchedule( void );
/**
* croutine. h
* <pre>
crSTART( CoRoutineHandle_t xHandle );</pre>
* crSTART( CoRoutineHandle_t xHandle );
* </pre>
*
* This macro MUST always be called at the start of a co-routine function.
*
* Example usage:
<pre>
// Co-routine to be created.
void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
{
// Variables in co-routines must be declared static if they must maintain value across a blocking call.
static int32_t ulAVariable;
// Must start every co-routine with a call to crSTART();
crSTART( xHandle );
for( ;; )
{
// Co-routine functionality goes here.
}
// Must end every co-routine with a call to crEND();
crEND();
}</pre>
* <pre>
* // Co-routine to be created.
* void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* // Variables in co-routines must be declared static if they must maintain value across a blocking call.
* static int32_t ulAVariable;
*
* // Must start every co-routine with a call to crSTART();
* crSTART( xHandle );
*
* for( ;; )
* {
* // Co-routine functionality goes here.
* }
*
* // Must end every co-routine with a call to crEND();
* crEND();
* }
* </pre>
* \defgroup crSTART crSTART
* \ingroup Tasks
*/
#define crSTART( pxCRCB ) switch( ( ( CRCB_t * )( pxCRCB ) )->uxState ) { case 0:
#define crSTART( pxCRCB ) \
switch( ( ( CRCB_t * ) ( pxCRCB ) )->uxState ) { \
case 0:
/**
* croutine. h
* <pre>
crEND();</pre>
* crEND();
* </pre>
*
* This macro MUST always be called at the end of a co-routine function.
*
* Example usage:
<pre>
// Co-routine to be created.
void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
{
// Variables in co-routines must be declared static if they must maintain value across a blocking call.
static int32_t ulAVariable;
// Must start every co-routine with a call to crSTART();
crSTART( xHandle );
for( ;; )
{
// Co-routine functionality goes here.
}
// Must end every co-routine with a call to crEND();
crEND();
}</pre>
* <pre>
* // Co-routine to be created.
* void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* // Variables in co-routines must be declared static if they must maintain value across a blocking call.
* static int32_t ulAVariable;
*
* // Must start every co-routine with a call to crSTART();
* crSTART( xHandle );
*
* for( ;; )
* {
* // Co-routine functionality goes here.
* }
*
* // Must end every co-routine with a call to crEND();
* crEND();
* }
* </pre>
* \defgroup crSTART crSTART
* \ingroup Tasks
*/
#define crEND() }
#define crEND() }
/*
* These macros are intended for internal use by the co-routine implementation
* only. The macros should not be used directly by application writers.
*/
#define crSET_STATE0( xHandle ) ( ( CRCB_t * )( xHandle ) )->uxState = (__LINE__ * 2); return; case (__LINE__ * 2):
#define crSET_STATE1( xHandle ) ( ( CRCB_t * )( xHandle ) )->uxState = ((__LINE__ * 2)+1); return; case ((__LINE__ * 2)+1):
#define crSET_STATE0( xHandle ) \
( ( CRCB_t * ) ( xHandle ) )->uxState = ( __LINE__ * 2 ); return; \
case ( __LINE__ * 2 ):
#define crSET_STATE1( xHandle ) \
( ( CRCB_t * ) ( xHandle ) )->uxState = ( ( __LINE__ * 2 ) + 1 ); return; \
case ( ( __LINE__ * 2 ) + 1 ):
/**
* croutine. h
*<pre>
crDELAY( CoRoutineHandle_t xHandle, TickType_t xTicksToDelay );</pre>
* <pre>
* crDELAY( CoRoutineHandle_t xHandle, TickType_t xTicksToDelay );
* </pre>
*
* Delay a co-routine for a fixed period of time.
*
@@ -261,48 +278,50 @@ void vCoRoutineSchedule( void );
* can be used to convert ticks to milliseconds.
*
* Example usage:
<pre>
// Co-routine to be created.
void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
{
// Variables in co-routines must be declared static if they must maintain value across a blocking call.
// This may not be necessary for const variables.
// We are to delay for 200ms.
static const xTickType xDelayTime = 200 / portTICK_PERIOD_MS;
// Must start every co-routine with a call to crSTART();
crSTART( xHandle );
for( ;; )
{
// Delay for 200ms.
crDELAY( xHandle, xDelayTime );
// Do something here.
}
// Must end every co-routine with a call to crEND();
crEND();
}</pre>
* <pre>
* // Co-routine to be created.
* void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* // Variables in co-routines must be declared static if they must maintain value across a blocking call.
* // This may not be necessary for const variables.
* // We are to delay for 200ms.
* static const xTickType xDelayTime = 200 / portTICK_PERIOD_MS;
*
* // Must start every co-routine with a call to crSTART();
* crSTART( xHandle );
*
* for( ;; )
* {
* // Delay for 200ms.
* crDELAY( xHandle, xDelayTime );
*
* // Do something here.
* }
*
* // Must end every co-routine with a call to crEND();
* crEND();
* }
* </pre>
* \defgroup crDELAY crDELAY
* \ingroup Tasks
*/
#define crDELAY( xHandle, xTicksToDelay ) \
if( ( xTicksToDelay ) > 0 ) \
{ \
vCoRoutineAddToDelayedList( ( xTicksToDelay ), NULL ); \
} \
crSET_STATE0( ( xHandle ) );
#define crDELAY( xHandle, xTicksToDelay ) \
if( ( xTicksToDelay ) > 0 ) \
{ \
vCoRoutineAddToDelayedList( ( xTicksToDelay ), NULL ); \
} \
crSET_STATE0( ( xHandle ) );
/**
* <pre>
crQUEUE_SEND(
CoRoutineHandle_t xHandle,
QueueHandle_t pxQueue,
void *pvItemToQueue,
TickType_t xTicksToWait,
BaseType_t *pxResult
)</pre>
* crQUEUE_SEND(
* CoRoutineHandle_t xHandle,
* QueueHandle_t pxQueue,
* void *pvItemToQueue,
* TickType_t xTicksToWait,
* BaseType_t *pxResult
* )
* </pre>
*
* The macro's crQUEUE_SEND() and crQUEUE_RECEIVE() are the co-routine
* equivalent to the xQueueSend() and xQueueReceive() functions used by tasks.
@@ -342,66 +361,68 @@ void vCoRoutineSchedule( void );
* error defined within ProjDefs.h.
*
* Example usage:
<pre>
// Co-routine function that blocks for a fixed period then posts a number onto
// a queue.
static void prvCoRoutineFlashTask( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
{
// Variables in co-routines must be declared static if they must maintain value across a blocking call.
static BaseType_t xNumberToPost = 0;
static BaseType_t xResult;
// Co-routines must begin with a call to crSTART().
crSTART( xHandle );
for( ;; )
{
// This assumes the queue has already been created.
crQUEUE_SEND( xHandle, xCoRoutineQueue, &xNumberToPost, NO_DELAY, &xResult );
if( xResult != pdPASS )
{
// The message was not posted!
}
// Increment the number to be posted onto the queue.
xNumberToPost++;
// Delay for 100 ticks.
crDELAY( xHandle, 100 );
}
// Co-routines must end with a call to crEND().
crEND();
}</pre>
* <pre>
* // Co-routine function that blocks for a fixed period then posts a number onto
* // a queue.
* static void prvCoRoutineFlashTask( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* // Variables in co-routines must be declared static if they must maintain value across a blocking call.
* static BaseType_t xNumberToPost = 0;
* static BaseType_t xResult;
*
* // Co-routines must begin with a call to crSTART().
* crSTART( xHandle );
*
* for( ;; )
* {
* // This assumes the queue has already been created.
* crQUEUE_SEND( xHandle, xCoRoutineQueue, &xNumberToPost, NO_DELAY, &xResult );
*
* if( xResult != pdPASS )
* {
* // The message was not posted!
* }
*
* // Increment the number to be posted onto the queue.
* xNumberToPost++;
*
* // Delay for 100 ticks.
* crDELAY( xHandle, 100 );
* }
*
* // Co-routines must end with a call to crEND().
* crEND();
* }
* </pre>
* \defgroup crQUEUE_SEND crQUEUE_SEND
* \ingroup Tasks
*/
#define crQUEUE_SEND( xHandle, pxQueue, pvItemToQueue, xTicksToWait, pxResult ) \
{ \
*( pxResult ) = xQueueCRSend( ( pxQueue) , ( pvItemToQueue) , ( xTicksToWait ) ); \
if( *( pxResult ) == errQUEUE_BLOCKED ) \
{ \
crSET_STATE0( ( xHandle ) ); \
*pxResult = xQueueCRSend( ( pxQueue ), ( pvItemToQueue ), 0 ); \
} \
if( *pxResult == errQUEUE_YIELD ) \
{ \
crSET_STATE1( ( xHandle ) ); \
*pxResult = pdPASS; \
} \
}
#define crQUEUE_SEND( xHandle, pxQueue, pvItemToQueue, xTicksToWait, pxResult ) \
{ \
*( pxResult ) = xQueueCRSend( ( pxQueue ), ( pvItemToQueue ), ( xTicksToWait ) ); \
if( *( pxResult ) == errQUEUE_BLOCKED ) \
{ \
crSET_STATE0( ( xHandle ) ); \
*pxResult = xQueueCRSend( ( pxQueue ), ( pvItemToQueue ), 0 ); \
} \
if( *pxResult == errQUEUE_YIELD ) \
{ \
crSET_STATE1( ( xHandle ) ); \
*pxResult = pdPASS; \
} \
}
/**
* croutine. h
* <pre>
crQUEUE_RECEIVE(
CoRoutineHandle_t xHandle,
QueueHandle_t pxQueue,
void *pvBuffer,
TickType_t xTicksToWait,
BaseType_t *pxResult
)</pre>
* crQUEUE_RECEIVE(
* CoRoutineHandle_t xHandle,
* QueueHandle_t pxQueue,
* void *pvBuffer,
* TickType_t xTicksToWait,
* BaseType_t *pxResult
* )
* </pre>
*
* The macro's crQUEUE_SEND() and crQUEUE_RECEIVE() are the co-routine
* equivalent to the xQueueSend() and xQueueReceive() functions used by tasks.
@@ -440,58 +461,60 @@ void vCoRoutineSchedule( void );
* an error code as defined within ProjDefs.h.
*
* Example usage:
<pre>
// A co-routine receives the number of an LED to flash from a queue. It
// blocks on the queue until the number is received.
static void prvCoRoutineFlashWorkTask( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
{
// Variables in co-routines must be declared static if they must maintain value across a blocking call.
static BaseType_t xResult;
static UBaseType_t uxLEDToFlash;
// All co-routines must start with a call to crSTART().
crSTART( xHandle );
for( ;; )
{
// Wait for data to become available on the queue.
crQUEUE_RECEIVE( xHandle, xCoRoutineQueue, &uxLEDToFlash, portMAX_DELAY, &xResult );
if( xResult == pdPASS )
{
// We received the LED to flash - flash it!
vParTestToggleLED( uxLEDToFlash );
}
}
crEND();
}</pre>
* <pre>
* // A co-routine receives the number of an LED to flash from a queue. It
* // blocks on the queue until the number is received.
* static void prvCoRoutineFlashWorkTask( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* // Variables in co-routines must be declared static if they must maintain value across a blocking call.
* static BaseType_t xResult;
* static UBaseType_t uxLEDToFlash;
*
* // All co-routines must start with a call to crSTART().
* crSTART( xHandle );
*
* for( ;; )
* {
* // Wait for data to become available on the queue.
* crQUEUE_RECEIVE( xHandle, xCoRoutineQueue, &uxLEDToFlash, portMAX_DELAY, &xResult );
*
* if( xResult == pdPASS )
* {
* // We received the LED to flash - flash it!
* vParTestToggleLED( uxLEDToFlash );
* }
* }
*
* crEND();
* }
* </pre>
* \defgroup crQUEUE_RECEIVE crQUEUE_RECEIVE
* \ingroup Tasks
*/
#define crQUEUE_RECEIVE( xHandle, pxQueue, pvBuffer, xTicksToWait, pxResult ) \
{ \
*( pxResult ) = xQueueCRReceive( ( pxQueue) , ( pvBuffer ), ( xTicksToWait ) ); \
if( *( pxResult ) == errQUEUE_BLOCKED ) \
{ \
crSET_STATE0( ( xHandle ) ); \
*( pxResult ) = xQueueCRReceive( ( pxQueue) , ( pvBuffer ), 0 ); \
} \
if( *( pxResult ) == errQUEUE_YIELD ) \
{ \
crSET_STATE1( ( xHandle ) ); \
*( pxResult ) = pdPASS; \
} \
}
#define crQUEUE_RECEIVE( xHandle, pxQueue, pvBuffer, xTicksToWait, pxResult ) \
{ \
*( pxResult ) = xQueueCRReceive( ( pxQueue ), ( pvBuffer ), ( xTicksToWait ) ); \
if( *( pxResult ) == errQUEUE_BLOCKED ) \
{ \
crSET_STATE0( ( xHandle ) ); \
*( pxResult ) = xQueueCRReceive( ( pxQueue ), ( pvBuffer ), 0 ); \
} \
if( *( pxResult ) == errQUEUE_YIELD ) \
{ \
crSET_STATE1( ( xHandle ) ); \
*( pxResult ) = pdPASS; \
} \
}
/**
* croutine. h
* <pre>
crQUEUE_SEND_FROM_ISR(
QueueHandle_t pxQueue,
void *pvItemToQueue,
BaseType_t xCoRoutinePreviouslyWoken
)</pre>
* crQUEUE_SEND_FROM_ISR(
* QueueHandle_t pxQueue,
* void *pvItemToQueue,
* BaseType_t xCoRoutinePreviouslyWoken
* )
* </pre>
*
* The macro's crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() are the
* co-routine equivalent to the xQueueSendFromISR() and xQueueReceiveFromISR()
@@ -526,69 +549,72 @@ void vCoRoutineSchedule( void );
* the ISR.
*
* Example usage:
<pre>
// A co-routine that blocks on a queue waiting for characters to be received.
static void vReceivingCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
{
char cRxedChar;
BaseType_t xResult;
// All co-routines must start with a call to crSTART().
crSTART( xHandle );
for( ;; )
{
// Wait for data to become available on the queue. This assumes the
// queue xCommsRxQueue has already been created!
crQUEUE_RECEIVE( xHandle, xCommsRxQueue, &uxLEDToFlash, portMAX_DELAY, &xResult );
// Was a character received?
if( xResult == pdPASS )
{
// Process the character here.
}
}
// All co-routines must end with a call to crEND().
crEND();
}
// An ISR that uses a queue to send characters received on a serial port to
// a co-routine.
void vUART_ISR( void )
{
char cRxedChar;
BaseType_t xCRWokenByPost = pdFALSE;
// We loop around reading characters until there are none left in the UART.
while( UART_RX_REG_NOT_EMPTY() )
{
// Obtain the character from the UART.
cRxedChar = UART_RX_REG;
// Post the character onto a queue. xCRWokenByPost will be pdFALSE
// the first time around the loop. If the post causes a co-routine
// to be woken (unblocked) then xCRWokenByPost will be set to pdTRUE.
// In this manner we can ensure that if more than one co-routine is
// blocked on the queue only one is woken by this ISR no matter how
// many characters are posted to the queue.
xCRWokenByPost = crQUEUE_SEND_FROM_ISR( xCommsRxQueue, &cRxedChar, xCRWokenByPost );
}
}</pre>
* <pre>
* // A co-routine that blocks on a queue waiting for characters to be received.
* static void vReceivingCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* char cRxedChar;
* BaseType_t xResult;
*
* // All co-routines must start with a call to crSTART().
* crSTART( xHandle );
*
* for( ;; )
* {
* // Wait for data to become available on the queue. This assumes the
* // queue xCommsRxQueue has already been created!
* crQUEUE_RECEIVE( xHandle, xCommsRxQueue, &uxLEDToFlash, portMAX_DELAY, &xResult );
*
* // Was a character received?
* if( xResult == pdPASS )
* {
* // Process the character here.
* }
* }
*
* // All co-routines must end with a call to crEND().
* crEND();
* }
*
* // An ISR that uses a queue to send characters received on a serial port to
* // a co-routine.
* void vUART_ISR( void )
* {
* char cRxedChar;
* BaseType_t xCRWokenByPost = pdFALSE;
*
* // We loop around reading characters until there are none left in the UART.
* while( UART_RX_REG_NOT_EMPTY() )
* {
* // Obtain the character from the UART.
* cRxedChar = UART_RX_REG;
*
* // Post the character onto a queue. xCRWokenByPost will be pdFALSE
* // the first time around the loop. If the post causes a co-routine
* // to be woken (unblocked) then xCRWokenByPost will be set to pdTRUE.
* // In this manner we can ensure that if more than one co-routine is
* // blocked on the queue only one is woken by this ISR no matter how
* // many characters are posted to the queue.
* xCRWokenByPost = crQUEUE_SEND_FROM_ISR( xCommsRxQueue, &cRxedChar, xCRWokenByPost );
* }
* }
* </pre>
* \defgroup crQUEUE_SEND_FROM_ISR crQUEUE_SEND_FROM_ISR
* \ingroup Tasks
*/
#define crQUEUE_SEND_FROM_ISR( pxQueue, pvItemToQueue, xCoRoutinePreviouslyWoken ) xQueueCRSendFromISR( ( pxQueue ), ( pvItemToQueue ), ( xCoRoutinePreviouslyWoken ) )
#define crQUEUE_SEND_FROM_ISR( pxQueue, pvItemToQueue, xCoRoutinePreviouslyWoken ) \
xQueueCRSendFromISR( ( pxQueue ), ( pvItemToQueue ), ( xCoRoutinePreviouslyWoken ) )
/**
* croutine. h
* <pre>
crQUEUE_SEND_FROM_ISR(
QueueHandle_t pxQueue,
void *pvBuffer,
BaseType_t * pxCoRoutineWoken
)</pre>
* crQUEUE_SEND_FROM_ISR(
* QueueHandle_t pxQueue,
* void *pvBuffer,
* BaseType_t * pxCoRoutineWoken
* )
* </pre>
*
* The macro's crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() are the
* co-routine equivalent to the xQueueSendFromISR() and xQueueReceiveFromISR()
@@ -623,75 +649,77 @@ void vCoRoutineSchedule( void );
* pdFALSE.
*
* Example usage:
<pre>
// A co-routine that posts a character to a queue then blocks for a fixed
// period. The character is incremented each time.
static void vSendingCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
{
// cChar holds its value while this co-routine is blocked and must therefore
// be declared static.
static char cCharToTx = 'a';
BaseType_t xResult;
// All co-routines must start with a call to crSTART().
crSTART( xHandle );
for( ;; )
{
// Send the next character to the queue.
crQUEUE_SEND( xHandle, xCoRoutineQueue, &cCharToTx, NO_DELAY, &xResult );
if( xResult == pdPASS )
{
// The character was successfully posted to the queue.
}
else
{
// Could not post the character to the queue.
}
// Enable the UART Tx interrupt to cause an interrupt in this
// hypothetical UART. The interrupt will obtain the character
// from the queue and send it.
ENABLE_RX_INTERRUPT();
// Increment to the next character then block for a fixed period.
// cCharToTx will maintain its value across the delay as it is
// declared static.
cCharToTx++;
if( cCharToTx > 'x' )
{
cCharToTx = 'a';
}
crDELAY( 100 );
}
// All co-routines must end with a call to crEND().
crEND();
}
// An ISR that uses a queue to receive characters to send on a UART.
void vUART_ISR( void )
{
char cCharToTx;
BaseType_t xCRWokenByPost = pdFALSE;
while( UART_TX_REG_EMPTY() )
{
// Are there any characters in the queue waiting to be sent?
// xCRWokenByPost will automatically be set to pdTRUE if a co-routine
// is woken by the post - ensuring that only a single co-routine is
// woken no matter how many times we go around this loop.
if( crQUEUE_RECEIVE_FROM_ISR( pxQueue, &cCharToTx, &xCRWokenByPost ) )
{
SEND_CHARACTER( cCharToTx );
}
}
}</pre>
* <pre>
* // A co-routine that posts a character to a queue then blocks for a fixed
* // period. The character is incremented each time.
* static void vSendingCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
* {
* // cChar holds its value while this co-routine is blocked and must therefore
* // be declared static.
* static char cCharToTx = 'a';
* BaseType_t xResult;
*
* // All co-routines must start with a call to crSTART().
* crSTART( xHandle );
*
* for( ;; )
* {
* // Send the next character to the queue.
* crQUEUE_SEND( xHandle, xCoRoutineQueue, &cCharToTx, NO_DELAY, &xResult );
*
* if( xResult == pdPASS )
* {
* // The character was successfully posted to the queue.
* }
* else
* {
* // Could not post the character to the queue.
* }
*
* // Enable the UART Tx interrupt to cause an interrupt in this
* // hypothetical UART. The interrupt will obtain the character
* // from the queue and send it.
* ENABLE_RX_INTERRUPT();
*
* // Increment to the next character then block for a fixed period.
* // cCharToTx will maintain its value across the delay as it is
* // declared static.
* cCharToTx++;
* if( cCharToTx > 'x' )
* {
* cCharToTx = 'a';
* }
* crDELAY( 100 );
* }
*
* // All co-routines must end with a call to crEND().
* crEND();
* }
*
* // An ISR that uses a queue to receive characters to send on a UART.
* void vUART_ISR( void )
* {
* char cCharToTx;
* BaseType_t xCRWokenByPost = pdFALSE;
*
* while( UART_TX_REG_EMPTY() )
* {
* // Are there any characters in the queue waiting to be sent?
* // xCRWokenByPost will automatically be set to pdTRUE if a co-routine
* // is woken by the post - ensuring that only a single co-routine is
* // woken no matter how many times we go around this loop.
* if( crQUEUE_RECEIVE_FROM_ISR( pxQueue, &cCharToTx, &xCRWokenByPost ) )
* {
* SEND_CHARACTER( cCharToTx );
* }
* }
* }
* </pre>
* \defgroup crQUEUE_RECEIVE_FROM_ISR crQUEUE_RECEIVE_FROM_ISR
* \ingroup Tasks
*/
#define crQUEUE_RECEIVE_FROM_ISR( pxQueue, pvBuffer, pxCoRoutineWoken ) xQueueCRReceiveFromISR( ( pxQueue ), ( pvBuffer ), ( pxCoRoutineWoken ) )
#define crQUEUE_RECEIVE_FROM_ISR( pxQueue, pvBuffer, pxCoRoutineWoken ) \
xQueueCRReceiveFromISR( ( pxQueue ), ( pvBuffer ), ( pxCoRoutineWoken ) )
/*
* This function is intended for internal use by the co-routine macros only.
@@ -702,7 +730,8 @@ void vCoRoutineSchedule( void );
* Removes the current co-routine from its ready list and places it in the
* appropriate delayed list.
*/
void vCoRoutineAddToDelayedList( TickType_t xTicksToDelay, List_t *pxEventList );
void vCoRoutineAddToDelayedList( TickType_t xTicksToDelay,
List_t * pxEventList );
/*
* This function is intended for internal use by the queue implementation only.
@@ -711,10 +740,12 @@ void vCoRoutineAddToDelayedList( TickType_t xTicksToDelay, List_t *pxEventList )
* Removes the highest priority co-routine from the event list and places it in
* the pending ready list.
*/
BaseType_t xCoRoutineRemoveFromEventList( const List_t *pxEventList );
BaseType_t xCoRoutineRemoveFromEventList( const List_t * pxEventList );
/* *INDENT-OFF* */
#ifdef __cplusplus
}
}
#endif
/* *INDENT-ON* */
#endif /* CO_ROUTINE_H */

40
source/Middlewares/Third_Party/FreeRTOS/Source/include/deprecated_definitions.h vendored Normal file
View File

@@ -0,0 +1,40 @@
/*
* FreeRTOS Kernel V10.4.1
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
#ifndef DEPRECATED_DEFINITIONS_H
#define DEPRECATED_DEFINITIONS_H
/* Each FreeRTOS port has a unique portmacro.h header file. Originally a
* pre-processor definition was used to ensure the pre-processor found the correct
* portmacro.h file for the port being used. That scheme was deprecated in favour
* of setting the compiler's include path such that it found the correct
* portmacro.h file - removing the need for the constant and allowing the
* portmacro.h file to be located anywhere in relation to the port being used. The
* definitions below remain in the code for backward compatibility only. New
* projects should not use them. */
#include "portmacro.h"
#endif /* DEPRECATED_DEFINITIONS_H */

1532
source/Middlewares/Third_Party/FreeRTOS/Source/include/event_groups.h vendored
View File

File diff suppressed because it is too large Load Diff

181
source/Middlewares/Third_Party/FreeRTOS/Source/include/list.h vendored
View File

@@ -1,5 +1,5 @@
/*
* FreeRTOS Kernel V10.3.1
* FreeRTOS Kernel V10.4.1
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
@@ -19,10 +19,9 @@
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
* 1 tab == 4 spaces!
*/
/*
@@ -53,13 +52,14 @@
* \ingroup FreeRTOSIntro
*/
#ifndef INC_FREERTOS_H
#error FreeRTOS.h must be included before list.h
#endif
#ifndef LIST_H
#define LIST_H
#ifndef INC_FREERTOS_H
#error "FreeRTOS.h must be included before list.h"
#endif
/*
* The list structure members are modified from within interrupts, and therefore
* by rights should be declared volatile. However, they are only modified in a
@@ -89,47 +89,49 @@
* "#define configLIST_VOLATILE volatile"
*/
#ifndef configLIST_VOLATILE
#define configLIST_VOLATILE
#define configLIST_VOLATILE
#endif /* configSUPPORT_CROSS_MODULE_OPTIMISATION */
/* *INDENT-OFF* */
#ifdef __cplusplus
extern "C" {
extern "C" {
#endif
/* *INDENT-ON* */
/* Macros that can be used to place known values within the list structures,
then check that the known values do not get corrupted during the execution of
the application. These may catch the list data structures being overwritten in
memory. They will not catch data errors caused by incorrect configuration or
use of FreeRTOS.*/
#if( configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES == 0 )
/* Define the macros to do nothing. */
#define listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE
#define listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE
#define listFIRST_LIST_INTEGRITY_CHECK_VALUE
#define listSECOND_LIST_INTEGRITY_CHECK_VALUE
#define listSET_FIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem )
#define listSET_SECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem )
#define listSET_LIST_INTEGRITY_CHECK_1_VALUE( pxList )
#define listSET_LIST_INTEGRITY_CHECK_2_VALUE( pxList )
#define listTEST_LIST_ITEM_INTEGRITY( pxItem )
#define listTEST_LIST_INTEGRITY( pxList )
#else
/* Define macros that add new members into the list structures. */
#define listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE TickType_t xListItemIntegrityValue1;
#define listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE TickType_t xListItemIntegrityValue2;
#define listFIRST_LIST_INTEGRITY_CHECK_VALUE TickType_t xListIntegrityValue1;
#define listSECOND_LIST_INTEGRITY_CHECK_VALUE TickType_t xListIntegrityValue2;
* then check that the known values do not get corrupted during the execution of
* the application. These may catch the list data structures being overwritten in
* memory. They will not catch data errors caused by incorrect configuration or
* use of FreeRTOS.*/
#if ( configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES == 0 )
/* Define the macros to do nothing. */
#define listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE
#define listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE
#define listFIRST_LIST_INTEGRITY_CHECK_VALUE
#define listSECOND_LIST_INTEGRITY_CHECK_VALUE
#define listSET_FIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem )
#define listSET_SECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem )
#define listSET_LIST_INTEGRITY_CHECK_1_VALUE( pxList )
#define listSET_LIST_INTEGRITY_CHECK_2_VALUE( pxList )
#define listTEST_LIST_ITEM_INTEGRITY( pxItem )
#define listTEST_LIST_INTEGRITY( pxList )
#else /* if ( configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES == 0 ) */
/* Define macros that add new members into the list structures. */
#define listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE TickType_t xListItemIntegrityValue1;
#define listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE TickType_t xListItemIntegrityValue2;
#define listFIRST_LIST_INTEGRITY_CHECK_VALUE TickType_t xListIntegrityValue1;
#define listSECOND_LIST_INTEGRITY_CHECK_VALUE TickType_t xListIntegrityValue2;
/* Define macros that set the new structure members to known values. */
#define listSET_FIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem ) ( pxItem )->xListItemIntegrityValue1 = pdINTEGRITY_CHECK_VALUE
#define listSET_SECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem ) ( pxItem )->xListItemIntegrityValue2 = pdINTEGRITY_CHECK_VALUE
#define listSET_LIST_INTEGRITY_CHECK_1_VALUE( pxList ) ( pxList )->xListIntegrityValue1 = pdINTEGRITY_CHECK_VALUE
#define listSET_LIST_INTEGRITY_CHECK_2_VALUE( pxList ) ( pxList )->xListIntegrityValue2 = pdINTEGRITY_CHECK_VALUE
/* Define macros that set the new structure members to known values. */
#define listSET_FIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem ) ( pxItem )->xListItemIntegrityValue1 = pdINTEGRITY_CHECK_VALUE
#define listSET_SECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem ) ( pxItem )->xListItemIntegrityValue2 = pdINTEGRITY_CHECK_VALUE
#define listSET_LIST_INTEGRITY_CHECK_1_VALUE( pxList ) ( pxList )->xListIntegrityValue1 = pdINTEGRITY_CHECK_VALUE
#define listSET_LIST_INTEGRITY_CHECK_2_VALUE( pxList ) ( pxList )->xListIntegrityValue2 = pdINTEGRITY_CHECK_VALUE
/* Define macros that will assert if one of the structure members does not
contain its expected value. */
#define listTEST_LIST_ITEM_INTEGRITY( pxItem ) configASSERT( ( ( pxItem )->xListItemIntegrityValue1 == pdINTEGRITY_CHECK_VALUE ) && ( ( pxItem )->xListItemIntegrityValue2 == pdINTEGRITY_CHECK_VALUE ) )
#define listTEST_LIST_INTEGRITY( pxList ) configASSERT( ( ( pxList )->xListIntegrityValue1 == pdINTEGRITY_CHECK_VALUE ) && ( ( pxList )->xListIntegrityValue2 == pdINTEGRITY_CHECK_VALUE ) )
/* Define macros that will assert if one of the structure members does not
* contain its expected value. */
#define listTEST_LIST_ITEM_INTEGRITY( pxItem ) configASSERT( ( ( pxItem )->xListItemIntegrityValue1 == pdINTEGRITY_CHECK_VALUE ) && ( ( pxItem )->xListItemIntegrityValue2 == pdINTEGRITY_CHECK_VALUE ) )
#define listTEST_LIST_INTEGRITY( pxList ) configASSERT( ( ( pxList )->xListIntegrityValue1 == pdINTEGRITY_CHECK_VALUE ) && ( ( pxList )->xListIntegrityValue2 == pdINTEGRITY_CHECK_VALUE ) )
#endif /* configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES */
@@ -139,22 +141,22 @@ use of FreeRTOS.*/
struct xLIST;
struct xLIST_ITEM
{
listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
configLIST_VOLATILE TickType_t xItemValue; /*< The value being listed. In most cases this is used to sort the list in descending order. */
struct xLIST_ITEM * configLIST_VOLATILE pxNext; /*< Pointer to the next ListItem_t in the list. */
struct xLIST_ITEM * configLIST_VOLATILE pxPrevious; /*< Pointer to the previous ListItem_t in the list. */
void * pvOwner; /*< Pointer to the object (normally a TCB) that contains the list item. There is therefore a two way link between the object containing the list item and the list item itself. */
struct xLIST * configLIST_VOLATILE pxContainer; /*< Pointer to the list in which this list item is placed (if any). */
listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
configLIST_VOLATILE TickType_t xItemValue; /*< The value being listed. In most cases this is used to sort the list in descending order. */
struct xLIST_ITEM * configLIST_VOLATILE pxNext; /*< Pointer to the next ListItem_t in the list. */
struct xLIST_ITEM * configLIST_VOLATILE pxPrevious; /*< Pointer to the previous ListItem_t in the list. */
void * pvOwner; /*< Pointer to the object (normally a TCB) that contains the list item. There is therefore a two way link between the object containing the list item and the list item itself. */
struct xLIST * configLIST_VOLATILE pxContainer; /*< Pointer to the list in which this list item is placed (if any). */
listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
};
typedef struct xLIST_ITEM ListItem_t; /* For some reason lint wants this as two separate definitions. */
typedef struct xLIST_ITEM ListItem_t; /* For some reason lint wants this as two separate definitions. */
struct xMINI_LIST_ITEM
{
listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
configLIST_VOLATILE TickType_t xItemValue;
struct xLIST_ITEM * configLIST_VOLATILE pxNext;
struct xLIST_ITEM * configLIST_VOLATILE pxPrevious;
listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
configLIST_VOLATILE TickType_t xItemValue;
struct xLIST_ITEM * configLIST_VOLATILE pxNext;
struct xLIST_ITEM * configLIST_VOLATILE pxPrevious;
};
typedef struct xMINI_LIST_ITEM MiniListItem_t;
@@ -163,11 +165,11 @@ typedef struct xMINI_LIST_ITEM MiniListItem_t;
*/
typedef struct xLIST
{
listFIRST_LIST_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
volatile UBaseType_t uxNumberOfItems;
ListItem_t * configLIST_VOLATILE pxIndex; /*< Used to walk through the list. Points to the last item returned by a call to listGET_OWNER_OF_NEXT_ENTRY (). */
MiniListItem_t xListEnd; /*< List item that contains the maximum possible item value meaning it is always at the end of the list and is therefore used as a marker. */
listSECOND_LIST_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
listFIRST_LIST_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
volatile UBaseType_t uxNumberOfItems;
ListItem_t * configLIST_VOLATILE pxIndex; /*< Used to walk through the list. Points to the last item returned by a call to listGET_OWNER_OF_NEXT_ENTRY (). */
MiniListItem_t xListEnd; /*< List item that contains the maximum possible item value meaning it is always at the end of the list and is therefore used as a marker. */
listSECOND_LIST_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
} List_t;
/*
@@ -177,7 +179,7 @@ typedef struct xLIST
* \page listSET_LIST_ITEM_OWNER listSET_LIST_ITEM_OWNER
* \ingroup LinkedList
*/
#define listSET_LIST_ITEM_OWNER( pxListItem, pxOwner ) ( ( pxListItem )->pvOwner = ( void * ) ( pxOwner ) )
#define listSET_LIST_ITEM_OWNER( pxListItem, pxOwner ) ( ( pxListItem )->pvOwner = ( void * ) ( pxOwner ) )
/*
* Access macro to get the owner of a list item. The owner of a list item
@@ -186,7 +188,7 @@ typedef struct xLIST
* \page listGET_LIST_ITEM_OWNER listSET_LIST_ITEM_OWNER
* \ingroup LinkedList
*/
#define listGET_LIST_ITEM_OWNER( pxListItem ) ( ( pxListItem )->pvOwner )
#define listGET_LIST_ITEM_OWNER( pxListItem ) ( ( pxListItem )->pvOwner )
/*
* Access macro to set the value of the list item. In most cases the value is
@@ -195,7 +197,7 @@ typedef struct xLIST
* \page listSET_LIST_ITEM_VALUE listSET_LIST_ITEM_VALUE
* \ingroup LinkedList
*/
#define listSET_LIST_ITEM_VALUE( pxListItem, xValue ) ( ( pxListItem )->xItemValue = ( xValue ) )
#define listSET_LIST_ITEM_VALUE( pxListItem, xValue ) ( ( pxListItem )->xItemValue = ( xValue ) )
/*
* Access macro to retrieve the value of the list item. The value can
@@ -205,7 +207,7 @@ typedef struct xLIST
* \page listGET_LIST_ITEM_VALUE listGET_LIST_ITEM_VALUE
* \ingroup LinkedList
*/
#define listGET_LIST_ITEM_VALUE( pxListItem ) ( ( pxListItem )->xItemValue )
#define listGET_LIST_ITEM_VALUE( pxListItem ) ( ( pxListItem )->xItemValue )
/*
* Access macro to retrieve the value of the list item at the head of a given
@@ -214,7 +216,7 @@ typedef struct xLIST
* \page listGET_LIST_ITEM_VALUE listGET_LIST_ITEM_VALUE
* \ingroup LinkedList
*/
#define listGET_ITEM_VALUE_OF_HEAD_ENTRY( pxList ) ( ( ( pxList )->xListEnd ).pxNext->xItemValue )
#define listGET_ITEM_VALUE_OF_HEAD_ENTRY( pxList ) ( ( ( pxList )->xListEnd ).pxNext->xItemValue )
/*
* Return the list item at the head of the list.
@@ -222,7 +224,7 @@ typedef struct xLIST
* \page listGET_HEAD_ENTRY listGET_HEAD_ENTRY
* \ingroup LinkedList
*/
#define listGET_HEAD_ENTRY( pxList ) ( ( ( pxList )->xListEnd ).pxNext )
#define listGET_HEAD_ENTRY( pxList ) ( ( ( pxList )->xListEnd ).pxNext )
/*
* Return the next list item.
@@ -230,7 +232,7 @@ typedef struct xLIST
* \page listGET_NEXT listGET_NEXT
* \ingroup LinkedList
*/
#define listGET_NEXT( pxListItem ) ( ( pxListItem )->pxNext )
#define listGET_NEXT( pxListItem ) ( ( pxListItem )->pxNext )
/*
* Return the list item that marks the end of the list
@@ -238,7 +240,7 @@ typedef struct xLIST
* \page listGET_END_MARKER listGET_END_MARKER
* \ingroup LinkedList
*/
#define listGET_END_MARKER( pxList ) ( ( ListItem_t const * ) ( &( ( pxList )->xListEnd ) ) )
#define listGET_END_MARKER( pxList ) ( ( ListItem_t const * ) ( &( ( pxList )->xListEnd ) ) )
/*
* Access macro to determine if a list contains any items. The macro will
@@ -247,12 +249,12 @@ typedef struct xLIST
* \page listLIST_IS_EMPTY listLIST_IS_EMPTY
* \ingroup LinkedList
*/
#define listLIST_IS_EMPTY( pxList ) ( ( ( pxList )->uxNumberOfItems == ( UBaseType_t ) 0 ) ? pdTRUE : pdFALSE )
#define listLIST_IS_EMPTY( pxList ) ( ( ( pxList )->uxNumberOfItems == ( UBaseType_t ) 0 ) ? pdTRUE : pdFALSE )
/*
* Access macro to return the number of items in the list.
*/
#define listCURRENT_LIST_LENGTH( pxList ) ( ( pxList )->uxNumberOfItems )
#define listCURRENT_LIST_LENGTH( pxList ) ( ( pxList )->uxNumberOfItems )
/*
* Access function to obtain the owner of the next entry in a list.
@@ -274,18 +276,18 @@ typedef struct xLIST
* \page listGET_OWNER_OF_NEXT_ENTRY listGET_OWNER_OF_NEXT_ENTRY
* \ingroup LinkedList
*/
#define listGET_OWNER_OF_NEXT_ENTRY( pxTCB, pxList ) \
{ \
List_t * const pxConstList = ( pxList ); \
/* Increment the index to the next item and return the item, ensuring */ \
/* we don't return the marker used at the end of the list. */ \
( pxConstList )->pxIndex = ( pxConstList )->pxIndex->pxNext; \
if( ( void * ) ( pxConstList )->pxIndex == ( void * ) &( ( pxConstList )->xListEnd ) ) \
{ \
( pxConstList )->pxIndex = ( pxConstList )->pxIndex->pxNext; \
} \
( pxTCB ) = ( pxConstList )->pxIndex->pvOwner; \
}
#define listGET_OWNER_OF_NEXT_ENTRY( pxTCB, pxList ) \
{ \
List_t * const pxConstList = ( pxList ); \
/* Increment the index to the next item and return the item, ensuring */ \
/* we don't return the marker used at the end of the list. */ \
( pxConstList )->pxIndex = ( pxConstList )->pxIndex->pxNext; \
if( ( void * ) ( pxConstList )->pxIndex == ( void * ) &( ( pxConstList )->xListEnd ) ) \
{ \
( pxConstList )->pxIndex = ( pxConstList )->pxIndex->pxNext; \
} \
( pxTCB ) = ( pxConstList )->pxIndex->pvOwner; \
}
/*
@@ -304,7 +306,7 @@ List_t * const pxConstList = ( pxList ); \
* \page listGET_OWNER_OF_HEAD_ENTRY listGET_OWNER_OF_HEAD_ENTRY
* \ingroup LinkedList
*/
#define listGET_OWNER_OF_HEAD_ENTRY( pxList ) ( (&( ( pxList )->xListEnd ))->pxNext->pvOwner )
#define listGET_OWNER_OF_HEAD_ENTRY( pxList ) ( ( &( ( pxList )->xListEnd ) )->pxNext->pvOwner )
/*
* Check to see if a list item is within a list. The list item maintains a
@@ -315,7 +317,7 @@ List_t * const pxConstList = ( pxList ); \
* @param pxListItem The list item we want to know if is in the list.
* @return pdTRUE if the list item is in the list, otherwise pdFALSE.
*/
#define listIS_CONTAINED_WITHIN( pxList, pxListItem ) ( ( ( pxListItem )->pxContainer == ( pxList ) ) ? ( pdTRUE ) : ( pdFALSE ) )
#define listIS_CONTAINED_WITHIN( pxList, pxListItem ) ( ( ( pxListItem )->pxContainer == ( pxList ) ) ? ( pdTRUE ) : ( pdFALSE ) )
/*
* Return the list a list item is contained within (referenced from).
@@ -323,14 +325,14 @@ List_t * const pxConstList = ( pxList ); \
* @param pxListItem The list item being queried.
* @return A pointer to the List_t object that references the pxListItem
*/
#define listLIST_ITEM_CONTAINER( pxListItem ) ( ( pxListItem )->pxContainer )
#define listLIST_ITEM_CONTAINER( pxListItem ) ( ( pxListItem )->pxContainer )
/*
* This provides a crude means of knowing if a list has been initialised, as
* pxList->xListEnd.xItemValue is set to portMAX_DELAY by the vListInitialise()
* function.
*/
#define listLIST_IS_INITIALISED( pxList ) ( ( pxList )->xListEnd.xItemValue == portMAX_DELAY )
#define listLIST_IS_INITIALISED( pxList ) ( ( pxList )->xListEnd.xItemValue == portMAX_DELAY )
/*
* Must be called before a list is used! This initialises all the members
@@ -366,7 +368,8 @@ void vListInitialiseItem( ListItem_t * const pxItem ) PRIVILEGED_FUNCTION;
* \page vListInsert vListInsert
* \ingroup LinkedList
*/
void vListInsert( List_t * const pxList, ListItem_t * const pxNewListItem ) PRIVILEGED_FUNCTION;
void vListInsert( List_t * const pxList,
ListItem_t * const pxNewListItem ) PRIVILEGED_FUNCTION;
/*
* Insert a list item into a list. The item will be inserted in a position
@@ -387,7 +390,8 @@ void vListInsert( List_t * const pxList, ListItem_t * const pxNewListItem ) PRIV
* \page vListInsertEnd vListInsertEnd
* \ingroup LinkedList
*/
void vListInsertEnd( List_t * const pxList, ListItem_t * const pxNewListItem ) PRIVILEGED_FUNCTION;
void vListInsertEnd( List_t * const pxList,
ListItem_t * const pxNewListItem ) PRIVILEGED_FUNCTION;
/*
* Remove an item from a list. The list item has a pointer to the list that
@@ -404,9 +408,10 @@ void vListInsertEnd( List_t * const pxList, ListItem_t * const pxNewListItem ) P
*/
UBaseType_t uxListRemove( ListItem_t * const pxItemToRemove ) PRIVILEGED_FUNCTION;
/* *INDENT-OFF* */
#ifdef __cplusplus
}
#endif
}
#endif
/* *INDENT-ON* */
#endif /* ifndef LIST_H */

516
source/Middlewares/Third_Party/FreeRTOS/Source/include/message_buffer.h vendored
View File

@@ -1,5 +1,5 @@
/*
* FreeRTOS Kernel V10.3.1
* FreeRTOS Kernel V10.4.1
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
@@ -19,10 +19,9 @@
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
* 1 tab == 4 spaces!
*/
@@ -63,15 +62,17 @@
#define FREERTOS_MESSAGE_BUFFER_H
#ifndef INC_FREERTOS_H
#error "include FreeRTOS.h must appear in source files before include message_buffer.h"
#error "include FreeRTOS.h must appear in source files before include message_buffer.h"
#endif
/* Message buffers are built onto of stream buffers. */
#include "stream_buffer.h"
/* *INDENT-OFF* */
#if defined( __cplusplus )
extern "C" {
extern "C" {
#endif
/* *INDENT-ON* */
/**
* Type by which message buffers are referenced. For example, a call to
@@ -86,9 +87,9 @@ typedef void * MessageBufferHandle_t;
/**
* message_buffer.h
*
<pre>
MessageBufferHandle_t xMessageBufferCreate( size_t xBufferSizeBytes );
</pre>
* <pre>
* MessageBufferHandle_t xMessageBufferCreate( size_t xBufferSizeBytes );
* </pre>
*
* Creates a new message buffer using dynamically allocated memory. See
* xMessageBufferCreateStatic() for a version that uses statically allocated
@@ -112,43 +113,44 @@ MessageBufferHandle_t xMessageBufferCreate( size_t xBufferSizeBytes );
* buffer.
*
* Example use:
<pre>
void vAFunction( void )
{
MessageBufferHandle_t xMessageBuffer;
const size_t xMessageBufferSizeBytes = 100;
// Create a message buffer that can hold 100 bytes. The memory used to hold
// both the message buffer structure and the messages themselves is allocated
// dynamically. Each message added to the buffer consumes an additional 4
// bytes which are used to hold the lengh of the message.
xMessageBuffer = xMessageBufferCreate( xMessageBufferSizeBytes );
if( xMessageBuffer == NULL )
{
// There was not enough heap memory space available to create the
// message buffer.
}
else
{
// The message buffer was created successfully and can now be used.
}
</pre>
* <pre>
*
* void vAFunction( void )
* {
* MessageBufferHandle_t xMessageBuffer;
* const size_t xMessageBufferSizeBytes = 100;
*
* // Create a message buffer that can hold 100 bytes. The memory used to hold
* // both the message buffer structure and the messages themselves is allocated
* // dynamically. Each message added to the buffer consumes an additional 4
* // bytes which are used to hold the lengh of the message.
* xMessageBuffer = xMessageBufferCreate( xMessageBufferSizeBytes );
*
* if( xMessageBuffer == NULL )
* {
* // There was not enough heap memory space available to create the
* // message buffer.
* }
* else
* {
* // The message buffer was created successfully and can now be used.
* }
*
* </pre>
* \defgroup xMessageBufferCreate xMessageBufferCreate
* \ingroup MessageBufferManagement
*/
#define xMessageBufferCreate( xBufferSizeBytes ) ( MessageBufferHandle_t ) xStreamBufferGenericCreate( xBufferSizeBytes, ( size_t ) 0, pdTRUE )
#define xMessageBufferCreate( xBufferSizeBytes ) \
( MessageBufferHandle_t ) xStreamBufferGenericCreate( xBufferSizeBytes, ( size_t ) 0, pdTRUE )
/**
* message_buffer.h
*
<pre>
MessageBufferHandle_t xMessageBufferCreateStatic( size_t xBufferSizeBytes,
uint8_t *pucMessageBufferStorageArea,
StaticMessageBuffer_t *pxStaticMessageBuffer );
</pre>
* <pre>
* MessageBufferHandle_t xMessageBufferCreateStatic( size_t xBufferSizeBytes,
* uint8_t *pucMessageBufferStorageArea,
* StaticMessageBuffer_t *pxStaticMessageBuffer );
* </pre>
* Creates a new message buffer using statically allocated memory. See
* xMessageBufferCreate() for a version that uses dynamically allocated memory.
*
@@ -173,49 +175,50 @@ MessageBufferHandle_t xMessageBufferCreateStatic( size_t xBufferSizeBytes,
* pxStaticmessageBuffer are NULL then NULL is returned.
*
* Example use:
<pre>
// Used to dimension the array used to hold the messages. The available space
// will actually be one less than this, so 999.
#define STORAGE_SIZE_BYTES 1000
// Defines the memory that will actually hold the messages within the message
// buffer.
static uint8_t ucStorageBuffer[ STORAGE_SIZE_BYTES ];
// The variable used to hold the message buffer structure.
StaticMessageBuffer_t xMessageBufferStruct;
void MyFunction( void )
{
MessageBufferHandle_t xMessageBuffer;
xMessageBuffer = xMessageBufferCreateStatic( sizeof( ucBufferStorage ),
ucBufferStorage,
&xMessageBufferStruct );
// As neither the pucMessageBufferStorageArea or pxStaticMessageBuffer
// parameters were NULL, xMessageBuffer will not be NULL, and can be used to
// reference the created message buffer in other message buffer API calls.
// Other code that uses the message buffer can go here.
}
</pre>
* <pre>
*
* // Used to dimension the array used to hold the messages. The available space
* // will actually be one less than this, so 999.
#define STORAGE_SIZE_BYTES 1000
*
* // Defines the memory that will actually hold the messages within the message
* // buffer.
* static uint8_t ucStorageBuffer[ STORAGE_SIZE_BYTES ];
*
* // The variable used to hold the message buffer structure.
* StaticMessageBuffer_t xMessageBufferStruct;
*
* void MyFunction( void )
* {
* MessageBufferHandle_t xMessageBuffer;
*
* xMessageBuffer = xMessageBufferCreateStatic( sizeof( ucBufferStorage ),
* ucBufferStorage,
* &xMessageBufferStruct );
*
* // As neither the pucMessageBufferStorageArea or pxStaticMessageBuffer
* // parameters were NULL, xMessageBuffer will not be NULL, and can be used to
* // reference the created message buffer in other message buffer API calls.
*
* // Other code that uses the message buffer can go here.
* }
*
* </pre>
* \defgroup xMessageBufferCreateStatic xMessageBufferCreateStatic
* \ingroup MessageBufferManagement
*/
#define xMessageBufferCreateStatic( xBufferSizeBytes, pucMessageBufferStorageArea, pxStaticMessageBuffer ) ( MessageBufferHandle_t ) xStreamBufferGenericCreateStatic( xBufferSizeBytes, 0, pdTRUE, pucMessageBufferStorageArea, pxStaticMessageBuffer )
#define xMessageBufferCreateStatic( xBufferSizeBytes, pucMessageBufferStorageArea, pxStaticMessageBuffer ) \
( MessageBufferHandle_t ) xStreamBufferGenericCreateStatic( xBufferSizeBytes, 0, pdTRUE, pucMessageBufferStorageArea, pxStaticMessageBuffer )
/**
* message_buffer.h
*
<pre>
size_t xMessageBufferSend( MessageBufferHandle_t xMessageBuffer,
const void *pvTxData,
size_t xDataLengthBytes,
TickType_t xTicksToWait );
<pre>
* <pre>
* size_t xMessageBufferSend( MessageBufferHandle_t xMessageBuffer,
* const void *pvTxData,
* size_t xDataLengthBytes,
* TickType_t xTicksToWait );
* </pre>
*
* Sends a discrete message to the message buffer. The message can be any
* length that fits within the buffer's free space, and is copied into the
@@ -272,49 +275,50 @@ size_t xMessageBufferSend( MessageBufferHandle_t xMessageBuffer,
* time out then xDataLengthBytes is returned.
*
* Example use:
<pre>
void vAFunction( MessageBufferHandle_t xMessageBuffer )
{
size_t xBytesSent;
uint8_t ucArrayToSend[] = { 0, 1, 2, 3 };
char *pcStringToSend = "String to send";
const TickType_t x100ms = pdMS_TO_TICKS( 100 );
// Send an array to the message buffer, blocking for a maximum of 100ms to
// wait for enough space to be available in the message buffer.
xBytesSent = xMessageBufferSend( xMessageBuffer, ( void * ) ucArrayToSend, sizeof( ucArrayToSend ), x100ms );
if( xBytesSent != sizeof( ucArrayToSend ) )
{
// The call to xMessageBufferSend() times out before there was enough
// space in the buffer for the data to be written.
}
// Send the string to the message buffer. Return immediately if there is
// not enough space in the buffer.
xBytesSent = xMessageBufferSend( xMessageBuffer, ( void * ) pcStringToSend, strlen( pcStringToSend ), 0 );
if( xBytesSent != strlen( pcStringToSend ) )
{
// The string could not be added to the message buffer because there was
// not enough free space in the buffer.
}
}
</pre>
* <pre>
* void vAFunction( MessageBufferHandle_t xMessageBuffer )
* {
* size_t xBytesSent;
* uint8_t ucArrayToSend[] = { 0, 1, 2, 3 };
* char *pcStringToSend = "String to send";
* const TickType_t x100ms = pdMS_TO_TICKS( 100 );
*
* // Send an array to the message buffer, blocking for a maximum of 100ms to
* // wait for enough space to be available in the message buffer.
* xBytesSent = xMessageBufferSend( xMessageBuffer, ( void * ) ucArrayToSend, sizeof( ucArrayToSend ), x100ms );
*
* if( xBytesSent != sizeof( ucArrayToSend ) )
* {
* // The call to xMessageBufferSend() times out before there was enough
* // space in the buffer for the data to be written.
* }
*
* // Send the string to the message buffer. Return immediately if there is
* // not enough space in the buffer.
* xBytesSent = xMessageBufferSend( xMessageBuffer, ( void * ) pcStringToSend, strlen( pcStringToSend ), 0 );
*
* if( xBytesSent != strlen( pcStringToSend ) )
* {
* // The string could not be added to the message buffer because there was
* // not enough free space in the buffer.
* }
* }
* </pre>
* \defgroup xMessageBufferSend xMessageBufferSend
* \ingroup MessageBufferManagement
*/
#define xMessageBufferSend( xMessageBuffer, pvTxData, xDataLengthBytes, xTicksToWait ) xStreamBufferSend( ( StreamBufferHandle_t ) xMessageBuffer, pvTxData, xDataLengthBytes, xTicksToWait )
#define xMessageBufferSend( xMessageBuffer, pvTxData, xDataLengthBytes, xTicksToWait ) \
xStreamBufferSend( ( StreamBufferHandle_t ) xMessageBuffer, pvTxData, xDataLengthBytes, xTicksToWait )
/**
* message_buffer.h
*
<pre>
size_t xMessageBufferSendFromISR( MessageBufferHandle_t xMessageBuffer,
const void *pvTxData,
size_t xDataLengthBytes,
BaseType_t *pxHigherPriorityTaskWoken );
<pre>
* <pre>
* size_t xMessageBufferSendFromISR( MessageBufferHandle_t xMessageBuffer,
* const void *pvTxData,
* size_t xDataLengthBytes,
* BaseType_t *pxHigherPriorityTaskWoken );
* </pre>
*
* Interrupt safe version of the API function that sends a discrete message to
* the message buffer. The message can be any length that fits within the
@@ -372,53 +376,54 @@ size_t xMessageBufferSendFromISR( MessageBufferHandle_t xMessageBuffer,
* then 0 is returned, otherwise xDataLengthBytes is returned.
*
* Example use:
<pre>
// A message buffer that has already been created.
MessageBufferHandle_t xMessageBuffer;
void vAnInterruptServiceRoutine( void )
{
size_t xBytesSent;
char *pcStringToSend = "String to send";
BaseType_t xHigherPriorityTaskWoken = pdFALSE; // Initialised to pdFALSE.
// Attempt to send the string to the message buffer.
xBytesSent = xMessageBufferSendFromISR( xMessageBuffer,
( void * ) pcStringToSend,
strlen( pcStringToSend ),
&xHigherPriorityTaskWoken );
if( xBytesSent != strlen( pcStringToSend ) )
{
// The string could not be added to the message buffer because there was
// not enough free space in the buffer.
}
// If xHigherPriorityTaskWoken was set to pdTRUE inside
// xMessageBufferSendFromISR() then a task that has a priority above the
// priority of the currently executing task was unblocked and a context
// switch should be performed to ensure the ISR returns to the unblocked
// task. In most FreeRTOS ports this is done by simply passing
// xHigherPriorityTaskWoken into portYIELD_FROM_ISR(), which will test the
// variables value, and perform the context switch if necessary. Check the
// documentation for the port in use for port specific instructions.
portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
}
</pre>
* <pre>
* // A message buffer that has already been created.
* MessageBufferHandle_t xMessageBuffer;
*
* void vAnInterruptServiceRoutine( void )
* {
* size_t xBytesSent;
* char *pcStringToSend = "String to send";
* BaseType_t xHigherPriorityTaskWoken = pdFALSE; // Initialised to pdFALSE.
*
* // Attempt to send the string to the message buffer.
* xBytesSent = xMessageBufferSendFromISR( xMessageBuffer,
* ( void * ) pcStringToSend,
* strlen( pcStringToSend ),
* &xHigherPriorityTaskWoken );
*
* if( xBytesSent != strlen( pcStringToSend ) )
* {
* // The string could not be added to the message buffer because there was
* // not enough free space in the buffer.
* }
*
* // If xHigherPriorityTaskWoken was set to pdTRUE inside
* // xMessageBufferSendFromISR() then a task that has a priority above the
* // priority of the currently executing task was unblocked and a context
* // switch should be performed to ensure the ISR returns to the unblocked
* // task. In most FreeRTOS ports this is done by simply passing
* // xHigherPriorityTaskWoken into portYIELD_FROM_ISR(), which will test the
* // variables value, and perform the context switch if necessary. Check the
* // documentation for the port in use for port specific instructions.
* portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
* }
* </pre>
* \defgroup xMessageBufferSendFromISR xMessageBufferSendFromISR
* \ingroup MessageBufferManagement
*/
#define xMessageBufferSendFromISR( xMessageBuffer, pvTxData, xDataLengthBytes, pxHigherPriorityTaskWoken ) xStreamBufferSendFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pvTxData, xDataLengthBytes, pxHigherPriorityTaskWoken )
#define xMessageBufferSendFromISR( xMessageBuffer, pvTxData, xDataLengthBytes, pxHigherPriorityTaskWoken ) \
xStreamBufferSendFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pvTxData, xDataLengthBytes, pxHigherPriorityTaskWoken )
/**
* message_buffer.h
*
<pre>
size_t xMessageBufferReceive( MessageBufferHandle_t xMessageBuffer,
void *pvRxData,
size_t xBufferLengthBytes,
TickType_t xTicksToWait );
</pre>
* <pre>
* size_t xMessageBufferReceive( MessageBufferHandle_t xMessageBuffer,
* void *pvRxData,
* size_t xBufferLengthBytes,
* TickType_t xTicksToWait );
* </pre>
*
* Receives a discrete message from a message buffer. Messages can be of
* variable length and are copied out of the buffer.
@@ -471,43 +476,44 @@ size_t xMessageBufferReceive( MessageBufferHandle_t xMessageBuffer,
* zero is returned.
*
* Example use:
<pre>
void vAFunction( MessageBuffer_t xMessageBuffer )
{
uint8_t ucRxData[ 20 ];
size_t xReceivedBytes;
const TickType_t xBlockTime = pdMS_TO_TICKS( 20 );
// Receive the next message from the message buffer. Wait in the Blocked
// state (so not using any CPU processing time) for a maximum of 100ms for
// a message to become available.
xReceivedBytes = xMessageBufferReceive( xMessageBuffer,
( void * ) ucRxData,
sizeof( ucRxData ),
xBlockTime );
if( xReceivedBytes > 0 )
{
// A ucRxData contains a message that is xReceivedBytes long. Process
// the message here....
}
}
</pre>
* <pre>
* void vAFunction( MessageBuffer_t xMessageBuffer )
* {
* uint8_t ucRxData[ 20 ];
* size_t xReceivedBytes;
* const TickType_t xBlockTime = pdMS_TO_TICKS( 20 );
*
* // Receive the next message from the message buffer. Wait in the Blocked
* // state (so not using any CPU processing time) for a maximum of 100ms for
* // a message to become available.
* xReceivedBytes = xMessageBufferReceive( xMessageBuffer,
* ( void * ) ucRxData,
* sizeof( ucRxData ),
* xBlockTime );
*
* if( xReceivedBytes > 0 )
* {
* // A ucRxData contains a message that is xReceivedBytes long. Process
* // the message here....
* }
* }
* </pre>
* \defgroup xMessageBufferReceive xMessageBufferReceive
* \ingroup MessageBufferManagement
*/
#define xMessageBufferReceive( xMessageBuffer, pvRxData, xBufferLengthBytes, xTicksToWait ) xStreamBufferReceive( ( StreamBufferHandle_t ) xMessageBuffer, pvRxData, xBufferLengthBytes, xTicksToWait )
#define xMessageBufferReceive( xMessageBuffer, pvRxData, xBufferLengthBytes, xTicksToWait ) \
xStreamBufferReceive( ( StreamBufferHandle_t ) xMessageBuffer, pvRxData, xBufferLengthBytes, xTicksToWait )
/**
* message_buffer.h
*
<pre>
size_t xMessageBufferReceiveFromISR( MessageBufferHandle_t xMessageBuffer,
void *pvRxData,
size_t xBufferLengthBytes,
BaseType_t *pxHigherPriorityTaskWoken );
</pre>
* <pre>
* size_t xMessageBufferReceiveFromISR( MessageBufferHandle_t xMessageBuffer,
* void *pvRxData,
* size_t xBufferLengthBytes,
* BaseType_t *pxHigherPriorityTaskWoken );
* </pre>
*
* An interrupt safe version of the API function that receives a discrete
* message from a message buffer. Messages can be of variable length and are
@@ -561,50 +567,51 @@ size_t xMessageBufferReceiveFromISR( MessageBufferHandle_t xMessageBuffer,
* any.
*
* Example use:
<pre>
// A message buffer that has already been created.
MessageBuffer_t xMessageBuffer;
void vAnInterruptServiceRoutine( void )
{
uint8_t ucRxData[ 20 ];
size_t xReceivedBytes;
BaseType_t xHigherPriorityTaskWoken = pdFALSE; // Initialised to pdFALSE.
// Receive the next message from the message buffer.
xReceivedBytes = xMessageBufferReceiveFromISR( xMessageBuffer,
( void * ) ucRxData,
sizeof( ucRxData ),
&xHigherPriorityTaskWoken );
if( xReceivedBytes > 0 )
{
// A ucRxData contains a message that is xReceivedBytes long. Process
// the message here....
}
// If xHigherPriorityTaskWoken was set to pdTRUE inside
// xMessageBufferReceiveFromISR() then a task that has a priority above the
// priority of the currently executing task was unblocked and a context
// switch should be performed to ensure the ISR returns to the unblocked
// task. In most FreeRTOS ports this is done by simply passing
// xHigherPriorityTaskWoken into portYIELD_FROM_ISR(), which will test the
// variables value, and perform the context switch if necessary. Check the
// documentation for the port in use for port specific instructions.
portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
}
</pre>
* <pre>
* // A message buffer that has already been created.
* MessageBuffer_t xMessageBuffer;
*
* void vAnInterruptServiceRoutine( void )
* {
* uint8_t ucRxData[ 20 ];
* size_t xReceivedBytes;
* BaseType_t xHigherPriorityTaskWoken = pdFALSE; // Initialised to pdFALSE.
*
* // Receive the next message from the message buffer.
* xReceivedBytes = xMessageBufferReceiveFromISR( xMessageBuffer,
* ( void * ) ucRxData,
* sizeof( ucRxData ),
* &xHigherPriorityTaskWoken );
*
* if( xReceivedBytes > 0 )
* {
* // A ucRxData contains a message that is xReceivedBytes long. Process
* // the message here....
* }
*
* // If xHigherPriorityTaskWoken was set to pdTRUE inside
* // xMessageBufferReceiveFromISR() then a task that has a priority above the
* // priority of the currently executing task was unblocked and a context
* // switch should be performed to ensure the ISR returns to the unblocked
* // task. In most FreeRTOS ports this is done by simply passing
* // xHigherPriorityTaskWoken into portYIELD_FROM_ISR(), which will test the
* // variables value, and perform the context switch if necessary. Check the
* // documentation for the port in use for port specific instructions.
* portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
* }
* </pre>
* \defgroup xMessageBufferReceiveFromISR xMessageBufferReceiveFromISR
* \ingroup MessageBufferManagement
*/
#define xMessageBufferReceiveFromISR( xMessageBuffer, pvRxData, xBufferLengthBytes, pxHigherPriorityTaskWoken ) xStreamBufferReceiveFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pvRxData, xBufferLengthBytes, pxHigherPriorityTaskWoken )
#define xMessageBufferReceiveFromISR( xMessageBuffer, pvRxData, xBufferLengthBytes, pxHigherPriorityTaskWoken ) \
xStreamBufferReceiveFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pvRxData, xBufferLengthBytes, pxHigherPriorityTaskWoken )
/**
* message_buffer.h
*
<pre>
void vMessageBufferDelete( MessageBufferHandle_t xMessageBuffer );
</pre>
* <pre>
* void vMessageBufferDelete( MessageBufferHandle_t xMessageBuffer );
* </pre>
*
* Deletes a message buffer that was previously created using a call to
* xMessageBufferCreate() or xMessageBufferCreateStatic(). If the message
@@ -617,13 +624,14 @@ void vMessageBufferDelete( MessageBufferHandle_t xMessageBuffer );
* @param xMessageBuffer The handle of the message buffer to be deleted.
*
*/
#define vMessageBufferDelete( xMessageBuffer ) vStreamBufferDelete( ( StreamBufferHandle_t ) xMessageBuffer )
#define vMessageBufferDelete( xMessageBuffer ) \
vStreamBufferDelete( ( StreamBufferHandle_t ) xMessageBuffer )
/**
* message_buffer.h
<pre>
BaseType_t xMessageBufferIsFull( MessageBufferHandle_t xMessageBuffer ) );
</pre>
* <pre>
* BaseType_t xMessageBufferIsFull( MessageBufferHandle_t xMessageBuffer ) );
* </pre>
*
* Tests to see if a message buffer is full. A message buffer is full if it
* cannot accept any more messages, of any size, until space is made available
@@ -634,13 +642,14 @@ BaseType_t xMessageBufferIsFull( MessageBufferHandle_t xMessageBuffer ) );
* @return If the message buffer referenced by xMessageBuffer is full then
* pdTRUE is returned. Otherwise pdFALSE is returned.
*/
#define xMessageBufferIsFull( xMessageBuffer ) xStreamBufferIsFull( ( StreamBufferHandle_t ) xMessageBuffer )
#define xMessageBufferIsFull( xMessageBuffer ) \
xStreamBufferIsFull( ( StreamBufferHandle_t ) xMessageBuffer )
/**
* message_buffer.h
<pre>
BaseType_t xMessageBufferIsEmpty( MessageBufferHandle_t xMessageBuffer ) );
</pre>
* <pre>
* BaseType_t xMessageBufferIsEmpty( MessageBufferHandle_t xMessageBuffer ) );
* </pre>
*
* Tests to see if a message buffer is empty (does not contain any messages).
*
@@ -650,13 +659,14 @@ BaseType_t xMessageBufferIsEmpty( MessageBufferHandle_t xMessageBuffer ) );
* pdTRUE is returned. Otherwise pdFALSE is returned.
*
*/
#define xMessageBufferIsEmpty( xMessageBuffer ) xStreamBufferIsEmpty( ( StreamBufferHandle_t ) xMessageBuffer )
#define xMessageBufferIsEmpty( xMessageBuffer ) \
xStreamBufferIsEmpty( ( StreamBufferHandle_t ) xMessageBuffer )
/**
* message_buffer.h
<pre>
BaseType_t xMessageBufferReset( MessageBufferHandle_t xMessageBuffer );
</pre>
* <pre>
* BaseType_t xMessageBufferReset( MessageBufferHandle_t xMessageBuffer );
* </pre>
*
* Resets a message buffer to its initial empty state, discarding any message it
* contained.
@@ -673,14 +683,15 @@ BaseType_t xMessageBufferReset( MessageBufferHandle_t xMessageBuffer );
* \defgroup xMessageBufferReset xMessageBufferReset
* \ingroup MessageBufferManagement
*/
#define xMessageBufferReset( xMessageBuffer ) xStreamBufferReset( ( StreamBufferHandle_t ) xMessageBuffer )
#define xMessageBufferReset( xMessageBuffer ) \
xStreamBufferReset( ( StreamBufferHandle_t ) xMessageBuffer )
/**
* message_buffer.h
<pre>
size_t xMessageBufferSpaceAvailable( MessageBufferHandle_t xMessageBuffer ) );
</pre>
* <pre>
* size_t xMessageBufferSpaceAvailable( MessageBufferHandle_t xMessageBuffer ) );
* </pre>
* Returns the number of bytes of free space in the message buffer.
*
* @param xMessageBuffer The handle of the message buffer being queried.
@@ -695,14 +706,16 @@ size_t xMessageBufferSpaceAvailable( MessageBufferHandle_t xMessageBuffer ) );
* \defgroup xMessageBufferSpaceAvailable xMessageBufferSpaceAvailable
* \ingroup MessageBufferManagement
*/
#define xMessageBufferSpaceAvailable( xMessageBuffer ) xStreamBufferSpacesAvailable( ( StreamBufferHandle_t ) xMessageBuffer )
#define xMessageBufferSpacesAvailable( xMessageBuffer ) xStreamBufferSpacesAvailable( ( StreamBufferHandle_t ) xMessageBuffer ) /* Corrects typo in original macro name. */
#define xMessageBufferSpaceAvailable( xMessageBuffer ) \
xStreamBufferSpacesAvailable( ( StreamBufferHandle_t ) xMessageBuffer )
#define xMessageBufferSpacesAvailable( xMessageBuffer ) \
xStreamBufferSpacesAvailable( ( StreamBufferHandle_t ) xMessageBuffer ) /* Corrects typo in original macro name. */
/**
* message_buffer.h
<pre>
size_t xMessageBufferNextLengthBytes( MessageBufferHandle_t xMessageBuffer ) );
</pre>
* <pre>
* size_t xMessageBufferNextLengthBytes( MessageBufferHandle_t xMessageBuffer ) );
* </pre>
* Returns the length (in bytes) of the next message in a message buffer.
* Useful if xMessageBufferReceive() returned 0 because the size of the buffer
* passed into xMessageBufferReceive() was too small to hold the next message.
@@ -715,14 +728,15 @@ size_t xMessageBufferSpaceAvailable( MessageBufferHandle_t xMessageBuffer ) );
* \defgroup xMessageBufferNextLengthBytes xMessageBufferNextLengthBytes
* \ingroup MessageBufferManagement
*/
#define xMessageBufferNextLengthBytes( xMessageBuffer ) xStreamBufferNextMessageLengthBytes( ( StreamBufferHandle_t ) xMessageBuffer ) PRIVILEGED_FUNCTION;
#define xMessageBufferNextLengthBytes( xMessageBuffer ) \
xStreamBufferNextMessageLengthBytes( ( StreamBufferHandle_t ) xMessageBuffer ) PRIVILEGED_FUNCTION;
/**
* message_buffer.h
*
<pre>
BaseType_t xMessageBufferSendCompletedFromISR( MessageBufferHandle_t xStreamBuffer, BaseType_t *pxHigherPriorityTaskWoken );
</pre>
* <pre>
* BaseType_t xMessageBufferSendCompletedFromISR( MessageBufferHandle_t xStreamBuffer, BaseType_t *pxHigherPriorityTaskWoken );
* </pre>
*
* For advanced users only.
*
@@ -754,14 +768,15 @@ BaseType_t xMessageBufferSendCompletedFromISR( MessageBufferHandle_t xStreamBuff
* \defgroup xMessageBufferSendCompletedFromISR xMessageBufferSendCompletedFromISR
* \ingroup StreamBufferManagement
*/
#define xMessageBufferSendCompletedFromISR( xMessageBuffer, pxHigherPriorityTaskWoken ) xStreamBufferSendCompletedFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pxHigherPriorityTaskWoken )
#define xMessageBufferSendCompletedFromISR( xMessageBuffer, pxHigherPriorityTaskWoken ) \
xStreamBufferSendCompletedFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pxHigherPriorityTaskWoken )
/**
* message_buffer.h
*
<pre>
BaseType_t xMessageBufferReceiveCompletedFromISR( MessageBufferHandle_t xStreamBuffer, BaseType_t *pxHigherPriorityTaskWoken );
</pre>
* <pre>
* BaseType_t xMessageBufferReceiveCompletedFromISR( MessageBufferHandle_t xStreamBuffer, BaseType_t *pxHigherPriorityTaskWoken );
* </pre>
*
* For advanced users only.
*
@@ -794,10 +809,13 @@ BaseType_t xMessageBufferReceiveCompletedFromISR( MessageBufferHandle_t xStreamB
* \defgroup xMessageBufferReceiveCompletedFromISR xMessageBufferReceiveCompletedFromISR
* \ingroup StreamBufferManagement
*/
#define xMessageBufferReceiveCompletedFromISR( xMessageBuffer, pxHigherPriorityTaskWoken ) xStreamBufferReceiveCompletedFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pxHigherPriorityTaskWoken )
#define xMessageBufferReceiveCompletedFromISR( xMessageBuffer, pxHigherPriorityTaskWoken ) \
xStreamBufferReceiveCompletedFromISR( ( StreamBufferHandle_t ) xMessageBuffer, pxHigherPriorityTaskWoken )
/* *INDENT-OFF* */
#if defined( __cplusplus )
} /* extern "C" */
} /* extern "C" */
#endif
/* *INDENT-ON* */
#endif /* !defined( FREERTOS_MESSAGE_BUFFER_H ) */
#endif /* !defined( FREERTOS_MESSAGE_BUFFER_H ) */

263
source/Middlewares/Third_Party/FreeRTOS/Source/include/mpu_prototypes.h vendored Normal file
View File

@@ -0,0 +1,263 @@
/*
* FreeRTOS Kernel V10.4.1
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
/*
* When the MPU is used the standard (non MPU) API functions are mapped to
* equivalents that start "MPU_", the prototypes for which are defined in this
* header files. This will cause the application code to call the MPU_ version
* which wraps the non-MPU version with privilege promoting then demoting code,
* so the kernel code always runs will full privileges.
*/
#ifndef MPU_PROTOTYPES_H
#define MPU_PROTOTYPES_H
/* MPU versions of tasks.h API functions. */
BaseType_t MPU_xTaskCreate( TaskFunction_t pxTaskCode,
const char * const pcName,
const uint16_t usStackDepth,
void * const pvParameters,
UBaseType_t uxPriority,
TaskHandle_t * const pxCreatedTask ) FREERTOS_SYSTEM_CALL;
TaskHandle_t MPU_xTaskCreateStatic( TaskFunction_t pxTaskCode,
const char * const pcName,
const uint32_t ulStackDepth,
void * const pvParameters,
UBaseType_t uxPriority,
StackType_t * const puxStackBuffer,
StaticTask_t * const pxTaskBuffer ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTaskCreateRestricted( const TaskParameters_t * const pxTaskDefinition,
TaskHandle_t * pxCreatedTask ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTaskCreateRestrictedStatic( const TaskParameters_t * const pxTaskDefinition,
TaskHandle_t * pxCreatedTask ) FREERTOS_SYSTEM_CALL;
void MPU_vTaskAllocateMPURegions( TaskHandle_t xTask,
const MemoryRegion_t * const pxRegions ) FREERTOS_SYSTEM_CALL;
void MPU_vTaskDelete( TaskHandle_t xTaskToDelete ) FREERTOS_SYSTEM_CALL;
void MPU_vTaskDelay( const TickType_t xTicksToDelay ) FREERTOS_SYSTEM_CALL;
void MPU_vTaskDelayUntil( TickType_t * const pxPreviousWakeTime,
const TickType_t xTimeIncrement ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTaskAbortDelay( TaskHandle_t xTask ) FREERTOS_SYSTEM_CALL;
UBaseType_t MPU_uxTaskPriorityGet( const TaskHandle_t xTask ) FREERTOS_SYSTEM_CALL;
eTaskState MPU_eTaskGetState( TaskHandle_t xTask ) FREERTOS_SYSTEM_CALL;
void MPU_vTaskGetInfo( TaskHandle_t xTask,
TaskStatus_t * pxTaskStatus,
BaseType_t xGetFreeStackSpace,
eTaskState eState ) FREERTOS_SYSTEM_CALL;
void MPU_vTaskPrioritySet( TaskHandle_t xTask,
UBaseType_t uxNewPriority ) FREERTOS_SYSTEM_CALL;
void MPU_vTaskSuspend( TaskHandle_t xTaskToSuspend ) FREERTOS_SYSTEM_CALL;
void MPU_vTaskResume( TaskHandle_t xTaskToResume ) FREERTOS_SYSTEM_CALL;
void MPU_vTaskStartScheduler( void ) FREERTOS_SYSTEM_CALL;
void MPU_vTaskSuspendAll( void ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTaskResumeAll( void ) FREERTOS_SYSTEM_CALL;
TickType_t MPU_xTaskGetTickCount( void ) FREERTOS_SYSTEM_CALL;
UBaseType_t MPU_uxTaskGetNumberOfTasks( void ) FREERTOS_SYSTEM_CALL;
char * MPU_pcTaskGetName( TaskHandle_t xTaskToQuery ) FREERTOS_SYSTEM_CALL;
TaskHandle_t MPU_xTaskGetHandle( const char * pcNameToQuery ) FREERTOS_SYSTEM_CALL;
UBaseType_t MPU_uxTaskGetStackHighWaterMark( TaskHandle_t xTask ) FREERTOS_SYSTEM_CALL;
configSTACK_DEPTH_TYPE MPU_uxTaskGetStackHighWaterMark2( TaskHandle_t xTask ) FREERTOS_SYSTEM_CALL;
void MPU_vTaskSetApplicationTaskTag( TaskHandle_t xTask,
TaskHookFunction_t pxHookFunction ) FREERTOS_SYSTEM_CALL;
TaskHookFunction_t MPU_xTaskGetApplicationTaskTag( TaskHandle_t xTask ) FREERTOS_SYSTEM_CALL;
void MPU_vTaskSetThreadLocalStoragePointer( TaskHandle_t xTaskToSet,
BaseType_t xIndex,
void * pvValue ) FREERTOS_SYSTEM_CALL;
void * MPU_pvTaskGetThreadLocalStoragePointer( TaskHandle_t xTaskToQuery,
BaseType_t xIndex ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTaskCallApplicationTaskHook( TaskHandle_t xTask,
void * pvParameter ) FREERTOS_SYSTEM_CALL;
TaskHandle_t MPU_xTaskGetIdleTaskHandle( void ) FREERTOS_SYSTEM_CALL;
UBaseType_t MPU_uxTaskGetSystemState( TaskStatus_t * const pxTaskStatusArray,
const UBaseType_t uxArraySize,
uint32_t * const pulTotalRunTime ) FREERTOS_SYSTEM_CALL;
uint32_t MPU_ulTaskGetIdleRunTimeCounter( void ) FREERTOS_SYSTEM_CALL;
void MPU_vTaskList( char * pcWriteBuffer ) FREERTOS_SYSTEM_CALL;
void MPU_vTaskGetRunTimeStats( char * pcWriteBuffer ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTaskGenericNotify( TaskHandle_t xTaskToNotify,
UBaseType_t uxIndexToNotify,
uint32_t ulValue,
eNotifyAction eAction,
uint32_t * pulPreviousNotificationValue ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTaskGenericNotifyWait( UBaseType_t uxIndexToWaitOn,
uint32_t ulBitsToClearOnEntry,
uint32_t ulBitsToClearOnExit,
uint32_t * pulNotificationValue,
TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
uint32_t MPU_ulTaskGenericNotifyTake( UBaseType_t uxIndexToWaitOn,
BaseType_t xClearCountOnExit,
TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTaskGenericNotifyStateClear( TaskHandle_t xTask,
UBaseType_t uxIndexToClear ) FREERTOS_SYSTEM_CALL;
uint32_t MPU_ulTaskGenericNotifyValueClear( TaskHandle_t xTask,
UBaseType_t uxIndexToClear,
uint32_t ulBitsToClear ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTaskIncrementTick( void ) FREERTOS_SYSTEM_CALL;
TaskHandle_t MPU_xTaskGetCurrentTaskHandle( void ) FREERTOS_SYSTEM_CALL;
void MPU_vTaskSetTimeOutState( TimeOut_t * const pxTimeOut ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTaskCheckForTimeOut( TimeOut_t * const pxTimeOut,
TickType_t * const pxTicksToWait ) FREERTOS_SYSTEM_CALL;
void MPU_vTaskMissedYield( void ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTaskGetSchedulerState( void ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTaskCatchUpTicks( TickType_t xTicksToCatchUp ) FREERTOS_SYSTEM_CALL;
/* MPU versions of queue.h API functions. */
BaseType_t MPU_xQueueGenericSend( QueueHandle_t xQueue,
const void * const pvItemToQueue,
TickType_t xTicksToWait,
const BaseType_t xCopyPosition ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xQueueReceive( QueueHandle_t xQueue,
void * const pvBuffer,
TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xQueuePeek( QueueHandle_t xQueue,
void * const pvBuffer,
TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xQueueSemaphoreTake( QueueHandle_t xQueue,
TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
UBaseType_t MPU_uxQueueMessagesWaiting( const QueueHandle_t xQueue ) FREERTOS_SYSTEM_CALL;
UBaseType_t MPU_uxQueueSpacesAvailable( const QueueHandle_t xQueue ) FREERTOS_SYSTEM_CALL;
void MPU_vQueueDelete( QueueHandle_t xQueue ) FREERTOS_SYSTEM_CALL;
QueueHandle_t MPU_xQueueCreateMutex( const uint8_t ucQueueType ) FREERTOS_SYSTEM_CALL;
QueueHandle_t MPU_xQueueCreateMutexStatic( const uint8_t ucQueueType,
StaticQueue_t * pxStaticQueue ) FREERTOS_SYSTEM_CALL;
QueueHandle_t MPU_xQueueCreateCountingSemaphore( const UBaseType_t uxMaxCount,
const UBaseType_t uxInitialCount ) FREERTOS_SYSTEM_CALL;
QueueHandle_t MPU_xQueueCreateCountingSemaphoreStatic( const UBaseType_t uxMaxCount,
const UBaseType_t uxInitialCount,
StaticQueue_t * pxStaticQueue ) FREERTOS_SYSTEM_CALL;
TaskHandle_t MPU_xQueueGetMutexHolder( QueueHandle_t xSemaphore ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xQueueTakeMutexRecursive( QueueHandle_t xMutex,
TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xQueueGiveMutexRecursive( QueueHandle_t pxMutex ) FREERTOS_SYSTEM_CALL;
void MPU_vQueueAddToRegistry( QueueHandle_t xQueue,
const char * pcName ) FREERTOS_SYSTEM_CALL;
void MPU_vQueueUnregisterQueue( QueueHandle_t xQueue ) FREERTOS_SYSTEM_CALL;
const char * MPU_pcQueueGetName( QueueHandle_t xQueue ) FREERTOS_SYSTEM_CALL;
QueueHandle_t MPU_xQueueGenericCreate( const UBaseType_t uxQueueLength,
const UBaseType_t uxItemSize,
const uint8_t ucQueueType ) FREERTOS_SYSTEM_CALL;
QueueHandle_t MPU_xQueueGenericCreateStatic( const UBaseType_t uxQueueLength,
const UBaseType_t uxItemSize,
uint8_t * pucQueueStorage,
StaticQueue_t * pxStaticQueue,
const uint8_t ucQueueType ) FREERTOS_SYSTEM_CALL;
QueueSetHandle_t MPU_xQueueCreateSet( const UBaseType_t uxEventQueueLength ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xQueueAddToSet( QueueSetMemberHandle_t xQueueOrSemaphore,
QueueSetHandle_t xQueueSet ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xQueueRemoveFromSet( QueueSetMemberHandle_t xQueueOrSemaphore,
QueueSetHandle_t xQueueSet ) FREERTOS_SYSTEM_CALL;
QueueSetMemberHandle_t MPU_xQueueSelectFromSet( QueueSetHandle_t xQueueSet,
const TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xQueueGenericReset( QueueHandle_t xQueue,
BaseType_t xNewQueue ) FREERTOS_SYSTEM_CALL;
void MPU_vQueueSetQueueNumber( QueueHandle_t xQueue,
UBaseType_t uxQueueNumber ) FREERTOS_SYSTEM_CALL;
UBaseType_t MPU_uxQueueGetQueueNumber( QueueHandle_t xQueue ) FREERTOS_SYSTEM_CALL;
uint8_t MPU_ucQueueGetQueueType( QueueHandle_t xQueue ) FREERTOS_SYSTEM_CALL;
/* MPU versions of timers.h API functions. */
TimerHandle_t MPU_xTimerCreate( const char * const pcTimerName,
const TickType_t xTimerPeriodInTicks,
const UBaseType_t uxAutoReload,
void * const pvTimerID,
TimerCallbackFunction_t pxCallbackFunction ) FREERTOS_SYSTEM_CALL;
TimerHandle_t MPU_xTimerCreateStatic( const char * const pcTimerName,
const TickType_t xTimerPeriodInTicks,
const UBaseType_t uxAutoReload,
void * const pvTimerID,
TimerCallbackFunction_t pxCallbackFunction,
StaticTimer_t * pxTimerBuffer ) FREERTOS_SYSTEM_CALL;
void * MPU_pvTimerGetTimerID( const TimerHandle_t xTimer ) FREERTOS_SYSTEM_CALL;
void MPU_vTimerSetTimerID( TimerHandle_t xTimer,
void * pvNewID ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTimerIsTimerActive( TimerHandle_t xTimer ) FREERTOS_SYSTEM_CALL;
TaskHandle_t MPU_xTimerGetTimerDaemonTaskHandle( void ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTimerPendFunctionCall( PendedFunction_t xFunctionToPend,
void * pvParameter1,
uint32_t ulParameter2,
TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
const char * MPU_pcTimerGetName( TimerHandle_t xTimer ) FREERTOS_SYSTEM_CALL;
void MPU_vTimerSetReloadMode( TimerHandle_t xTimer,
const UBaseType_t uxAutoReload ) FREERTOS_SYSTEM_CALL;
UBaseType_t MPU_uxTimerGetReloadMode( TimerHandle_t xTimer ) FREERTOS_SYSTEM_CALL;
TickType_t MPU_xTimerGetPeriod( TimerHandle_t xTimer ) FREERTOS_SYSTEM_CALL;
TickType_t MPU_xTimerGetExpiryTime( TimerHandle_t xTimer ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTimerCreateTimerTask( void ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xTimerGenericCommand( TimerHandle_t xTimer,
const BaseType_t xCommandID,
const TickType_t xOptionalValue,
BaseType_t * const pxHigherPriorityTaskWoken,
const TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
/* MPU versions of event_group.h API functions. */
EventGroupHandle_t MPU_xEventGroupCreate( void ) FREERTOS_SYSTEM_CALL;
EventGroupHandle_t MPU_xEventGroupCreateStatic( StaticEventGroup_t * pxEventGroupBuffer ) FREERTOS_SYSTEM_CALL;
EventBits_t MPU_xEventGroupWaitBits( EventGroupHandle_t xEventGroup,
const EventBits_t uxBitsToWaitFor,
const BaseType_t xClearOnExit,
const BaseType_t xWaitForAllBits,
TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
EventBits_t MPU_xEventGroupClearBits( EventGroupHandle_t xEventGroup,
const EventBits_t uxBitsToClear ) FREERTOS_SYSTEM_CALL;
EventBits_t MPU_xEventGroupSetBits( EventGroupHandle_t xEventGroup,
const EventBits_t uxBitsToSet ) FREERTOS_SYSTEM_CALL;
EventBits_t MPU_xEventGroupSync( EventGroupHandle_t xEventGroup,
const EventBits_t uxBitsToSet,
const EventBits_t uxBitsToWaitFor,
TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
void MPU_vEventGroupDelete( EventGroupHandle_t xEventGroup ) FREERTOS_SYSTEM_CALL;
UBaseType_t MPU_uxEventGroupGetNumber( void * xEventGroup ) FREERTOS_SYSTEM_CALL;
/* MPU versions of message/stream_buffer.h API functions. */
size_t MPU_xStreamBufferSend( StreamBufferHandle_t xStreamBuffer,
const void * pvTxData,
size_t xDataLengthBytes,
TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
size_t MPU_xStreamBufferReceive( StreamBufferHandle_t xStreamBuffer,
void * pvRxData,
size_t xBufferLengthBytes,
TickType_t xTicksToWait ) FREERTOS_SYSTEM_CALL;
size_t MPU_xStreamBufferNextMessageLengthBytes( StreamBufferHandle_t xStreamBuffer ) FREERTOS_SYSTEM_CALL;
void MPU_vStreamBufferDelete( StreamBufferHandle_t xStreamBuffer ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xStreamBufferIsFull( StreamBufferHandle_t xStreamBuffer ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xStreamBufferIsEmpty( StreamBufferHandle_t xStreamBuffer ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xStreamBufferReset( StreamBufferHandle_t xStreamBuffer ) FREERTOS_SYSTEM_CALL;
size_t MPU_xStreamBufferSpacesAvailable( StreamBufferHandle_t xStreamBuffer ) FREERTOS_SYSTEM_CALL;
size_t MPU_xStreamBufferBytesAvailable( StreamBufferHandle_t xStreamBuffer ) FREERTOS_SYSTEM_CALL;
BaseType_t MPU_xStreamBufferSetTriggerLevel( StreamBufferHandle_t xStreamBuffer,
size_t xTriggerLevel ) FREERTOS_SYSTEM_CALL;
StreamBufferHandle_t MPU_xStreamBufferGenericCreate( size_t xBufferSizeBytes,
size_t xTriggerLevelBytes,
BaseType_t xIsMessageBuffer ) FREERTOS_SYSTEM_CALL;
StreamBufferHandle_t MPU_xStreamBufferGenericCreateStatic( size_t xBufferSizeBytes,
size_t xTriggerLevelBytes,
BaseType_t xIsMessageBuffer,
uint8_t * const pucStreamBufferStorageArea,
StaticStreamBuffer_t * const pxStaticStreamBuffer ) FREERTOS_SYSTEM_CALL;
#endif /* MPU_PROTOTYPES_H */

186
source/Middlewares/Third_Party/FreeRTOS/Source/include/mpu_wrappers.h vendored Normal file
View File

@@ -0,0 +1,186 @@
/*
* FreeRTOS Kernel V10.4.1
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
#ifndef MPU_WRAPPERS_H
#define MPU_WRAPPERS_H
/* This file redefines API functions to be called through a wrapper macro, but
* only for ports that are using the MPU. */
#ifdef portUSING_MPU_WRAPPERS
#error MPU
/* MPU_WRAPPERS_INCLUDED_FROM_API_FILE will be defined when this file is
* included from queue.c or task.c to prevent it from having an effect within
* those files. */
#ifndef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
/*
* Map standard (non MPU) API functions to equivalents that start
* "MPU_". This will cause the application code to call the MPU_
* version, which wraps the non-MPU version with privilege promoting
* then demoting code, so the kernel code always runs will full
* privileges.
*/
/* Map standard tasks.h API functions to the MPU equivalents. */
#define xTaskCreate MPU_xTaskCreate
#define xTaskCreateStatic MPU_xTaskCreateStatic
#define xTaskCreateRestricted MPU_xTaskCreateRestricted
#define vTaskAllocateMPURegions MPU_vTaskAllocateMPURegions
#define vTaskDelete MPU_vTaskDelete
#define vTaskDelay MPU_vTaskDelay
#define vTaskDelayUntil MPU_vTaskDelayUntil
#define xTaskAbortDelay MPU_xTaskAbortDelay
#define uxTaskPriorityGet MPU_uxTaskPriorityGet
#define eTaskGetState MPU_eTaskGetState
#define vTaskGetInfo MPU_vTaskGetInfo
#define vTaskPrioritySet MPU_vTaskPrioritySet
#define vTaskSuspend MPU_vTaskSuspend
#define vTaskResume MPU_vTaskResume
#define vTaskSuspendAll MPU_vTaskSuspendAll
#define xTaskResumeAll MPU_xTaskResumeAll
#define xTaskGetTickCount MPU_xTaskGetTickCount
#define uxTaskGetNumberOfTasks MPU_uxTaskGetNumberOfTasks
#define pcTaskGetName MPU_pcTaskGetName
#define xTaskGetHandle MPU_xTaskGetHandle
#define uxTaskGetStackHighWaterMark MPU_uxTaskGetStackHighWaterMark
#define uxTaskGetStackHighWaterMark2 MPU_uxTaskGetStackHighWaterMark2
#define vTaskSetApplicationTaskTag MPU_vTaskSetApplicationTaskTag
#define xTaskGetApplicationTaskTag MPU_xTaskGetApplicationTaskTag
#define vTaskSetThreadLocalStoragePointer MPU_vTaskSetThreadLocalStoragePointer
#define pvTaskGetThreadLocalStoragePointer MPU_pvTaskGetThreadLocalStoragePointer
#define xTaskCallApplicationTaskHook MPU_xTaskCallApplicationTaskHook
#define xTaskGetIdleTaskHandle MPU_xTaskGetIdleTaskHandle
#define uxTaskGetSystemState MPU_uxTaskGetSystemState
#define vTaskList MPU_vTaskList
#define vTaskGetRunTimeStats MPU_vTaskGetRunTimeStats
#define ulTaskGetIdleRunTimeCounter MPU_ulTaskGetIdleRunTimeCounter
#define xTaskGenericNotify MPU_xTaskGenericNotify
#define xTaskGenericNotifyWait MPU_xTaskGenericNotifyWait
#define ulTaskGenericNotifyTake MPU_ulTaskGenericNotifyTake
#define xTaskGenericNotifyStateClear MPU_xTaskGenericNotifyStateClear
#define ulTaskGenericNotifyValueClear MPU_ulTaskGenericNotifyValueClear
#define xTaskCatchUpTicks MPU_xTaskCatchUpTicks
#define xTaskGetCurrentTaskHandle MPU_xTaskGetCurrentTaskHandle
#define vTaskSetTimeOutState MPU_vTaskSetTimeOutState
#define xTaskCheckForTimeOut MPU_xTaskCheckForTimeOut
#define xTaskGetSchedulerState MPU_xTaskGetSchedulerState
/* Map standard queue.h API functions to the MPU equivalents. */
#define xQueueGenericSend MPU_xQueueGenericSend
#define xQueueReceive MPU_xQueueReceive
#define xQueuePeek MPU_xQueuePeek
#define xQueueSemaphoreTake MPU_xQueueSemaphoreTake
#define uxQueueMessagesWaiting MPU_uxQueueMessagesWaiting
#define uxQueueSpacesAvailable MPU_uxQueueSpacesAvailable
#define vQueueDelete MPU_vQueueDelete
#define xQueueCreateMutex MPU_xQueueCreateMutex
#define xQueueCreateMutexStatic MPU_xQueueCreateMutexStatic
#define xQueueCreateCountingSemaphore MPU_xQueueCreateCountingSemaphore
#define xQueueCreateCountingSemaphoreStatic MPU_xQueueCreateCountingSemaphoreStatic
#define xQueueGetMutexHolder MPU_xQueueGetMutexHolder
#define xQueueTakeMutexRecursive MPU_xQueueTakeMutexRecursive
#define xQueueGiveMutexRecursive MPU_xQueueGiveMutexRecursive
#define xQueueGenericCreate MPU_xQueueGenericCreate
#define xQueueGenericCreateStatic MPU_xQueueGenericCreateStatic
#define xQueueCreateSet MPU_xQueueCreateSet
#define xQueueAddToSet MPU_xQueueAddToSet
#define xQueueRemoveFromSet MPU_xQueueRemoveFromSet
#define xQueueSelectFromSet MPU_xQueueSelectFromSet
#define xQueueGenericReset MPU_xQueueGenericReset
#if (configQUEUE_REGISTRY_SIZE > 0)
#define vQueueAddToRegistry MPU_vQueueAddToRegistry
#define vQueueUnregisterQueue MPU_vQueueUnregisterQueue
#define pcQueueGetName MPU_pcQueueGetName
#endif
/* Map standard timer.h API functions to the MPU equivalents. */
#define xTimerCreate MPU_xTimerCreate
#define xTimerCreateStatic MPU_xTimerCreateStatic
#define pvTimerGetTimerID MPU_pvTimerGetTimerID
#define vTimerSetTimerID MPU_vTimerSetTimerID
#define xTimerIsTimerActive MPU_xTimerIsTimerActive
#define xTimerGetTimerDaemonTaskHandle MPU_xTimerGetTimerDaemonTaskHandle
#define xTimerPendFunctionCall MPU_xTimerPendFunctionCall
#define pcTimerGetName MPU_pcTimerGetName
#define vTimerSetReloadMode MPU_vTimerSetReloadMode
#define uxTimerGetReloadMode MPU_uxTimerGetReloadMode
#define xTimerGetPeriod MPU_xTimerGetPeriod
#define xTimerGetExpiryTime MPU_xTimerGetExpiryTime
#define xTimerGenericCommand MPU_xTimerGenericCommand
/* Map standard event_group.h API functions to the MPU equivalents. */
#define xEventGroupCreate MPU_xEventGroupCreate
#define xEventGroupCreateStatic MPU_xEventGroupCreateStatic
#define xEventGroupWaitBits MPU_xEventGroupWaitBits
#define xEventGroupClearBits MPU_xEventGroupClearBits
#define xEventGroupSetBits MPU_xEventGroupSetBits
#define xEventGroupSync MPU_xEventGroupSync
#define vEventGroupDelete MPU_vEventGroupDelete
/* Map standard message/stream_buffer.h API functions to the MPU
* equivalents. */
#define xStreamBufferSend MPU_xStreamBufferSend
#define xStreamBufferReceive MPU_xStreamBufferReceive
#define xStreamBufferNextMessageLengthBytes MPU_xStreamBufferNextMessageLengthBytes
#define vStreamBufferDelete MPU_vStreamBufferDelete
#define xStreamBufferIsFull MPU_xStreamBufferIsFull
#define xStreamBufferIsEmpty MPU_xStreamBufferIsEmpty
#define xStreamBufferReset MPU_xStreamBufferReset
#define xStreamBufferSpacesAvailable MPU_xStreamBufferSpacesAvailable
#define xStreamBufferBytesAvailable MPU_xStreamBufferBytesAvailable
#define xStreamBufferSetTriggerLevel MPU_xStreamBufferSetTriggerLevel
#define xStreamBufferGenericCreate MPU_xStreamBufferGenericCreate
#define xStreamBufferGenericCreateStatic MPU_xStreamBufferGenericCreateStatic
/* Remove the privileged function macro, but keep the PRIVILEGED_DATA
* macro so applications can place data in privileged access sections
* (useful when using statically allocated objects). */
#define PRIVILEGED_FUNCTION
#define PRIVILEGED_DATA __attribute__((section("privileged_data")))
#define FREERTOS_SYSTEM_CALL
#else /* MPU_WRAPPERS_INCLUDED_FROM_API_FILE */
/* Ensure API functions go in the privileged execution section. */
#define PRIVILEGED_FUNCTION __attribute__((section("privileged_functions")))
#define PRIVILEGED_DATA __attribute__((section("privileged_data")))
#define FREERTOS_SYSTEM_CALL __attribute__((section("freertos_system_calls")))
#endif /* MPU_WRAPPERS_INCLUDED_FROM_API_FILE */
#else /* portUSING_MPU_WRAPPERS */
#define PRIVILEGED_FUNCTION
#define PRIVILEGED_DATA
#define FREERTOS_SYSTEM_CALL
#define portUSING_MPU_WRAPPERS 0
#endif /* portUSING_MPU_WRAPPERS */
#endif /* MPU_WRAPPERS_H */

163
source/Middlewares/Third_Party/FreeRTOS/Source/include/portable.h vendored
View File

@@ -1,5 +1,5 @@
/*
* FreeRTOS Kernel V10.3.1
* FreeRTOS Kernel V10.4.1
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
@@ -19,87 +19,85 @@
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
* 1 tab == 4 spaces!
*/
/*-----------------------------------------------------------
* Portable layer API. Each function must be defined for each port.
*----------------------------------------------------------*/
* Portable layer API. Each function must be defined for each port.
*----------------------------------------------------------*/
#ifndef PORTABLE_H
#define PORTABLE_H
/* Each FreeRTOS port has a unique portmacro.h header file. Originally a
pre-processor definition was used to ensure the pre-processor found the correct
portmacro.h file for the port being used. That scheme was deprecated in favour
of setting the compiler's include path such that it found the correct
portmacro.h file - removing the need for the constant and allowing the
portmacro.h file to be located anywhere in relation to the port being used.
Purely for reasons of backward compatibility the old method is still valid, but
to make it clear that new projects should not use it, support for the port
specific constants has been moved into the deprecated_definitions.h header
file. */
* pre-processor definition was used to ensure the pre-processor found the correct
* portmacro.h file for the port being used. That scheme was deprecated in favour
* of setting the compiler's include path such that it found the correct
* portmacro.h file - removing the need for the constant and allowing the
* portmacro.h file to be located anywhere in relation to the port being used.
* Purely for reasons of backward compatibility the old method is still valid, but
* to make it clear that new projects should not use it, support for the port
* specific constants has been moved into the deprecated_definitions.h header
* file. */
#include "deprecated_definitions.h"
/* If portENTER_CRITICAL is not defined then including deprecated_definitions.h
did not result in a portmacro.h header file being included - and it should be
included here. In this case the path to the correct portmacro.h header file
must be set in the compiler's include path. */
* did not result in a portmacro.h header file being included - and it should be
* included here. In this case the path to the correct portmacro.h header file
* must be set in the compiler's include path. */
#ifndef portENTER_CRITICAL
#include "portmacro.h"
#include "portmacro.h"
#endif
#if portBYTE_ALIGNMENT == 32
#define portBYTE_ALIGNMENT_MASK (0x001f)
#define portBYTE_ALIGNMENT_MASK ( 0x001f )
#endif
#if portBYTE_ALIGNMENT == 16
#define portBYTE_ALIGNMENT_MASK (0x000f)
#define portBYTE_ALIGNMENT_MASK ( 0x000f )
#endif
#if portBYTE_ALIGNMENT == 8
#define portBYTE_ALIGNMENT_MASK (0x0007)
#define portBYTE_ALIGNMENT_MASK ( 0x0007 )
#endif
#if portBYTE_ALIGNMENT == 4
#define portBYTE_ALIGNMENT_MASK (0x0003)
#define portBYTE_ALIGNMENT_MASK ( 0x0003 )
#endif
#if portBYTE_ALIGNMENT == 2
#define portBYTE_ALIGNMENT_MASK (0x0001)
#define portBYTE_ALIGNMENT_MASK ( 0x0001 )
#endif
#if portBYTE_ALIGNMENT == 1
#define portBYTE_ALIGNMENT_MASK (0x0000)
#define portBYTE_ALIGNMENT_MASK ( 0x0000 )
#endif
#ifndef portBYTE_ALIGNMENT_MASK
#error "Invalid portBYTE_ALIGNMENT definition"
#error "Invalid portBYTE_ALIGNMENT definition"
#endif
#ifndef portNUM_CONFIGURABLE_REGIONS
#define portNUM_CONFIGURABLE_REGIONS 1
#define portNUM_CONFIGURABLE_REGIONS 1
#endif
#ifndef portHAS_STACK_OVERFLOW_CHECKING
#define portHAS_STACK_OVERFLOW_CHECKING 0
#define portHAS_STACK_OVERFLOW_CHECKING 0
#endif
#ifndef portARCH_NAME
#define portARCH_NAME NULL
#define portARCH_NAME NULL
#endif
/* *INDENT-OFF* */
#ifdef __cplusplus
extern "C" {
extern "C" {
#endif
/* *INDENT-ON* */
#define PRIVILEGED_FUNCTION
#define PRIVILEGED_DATA
#define FREERTOS_SYSTEM_CALL
#define portUSING_MPU_WRAPPERS 0
// #include "mpu_wrappers.h"
#include "mpu_wrappers.h"
/*
* Setup the stack of a new task so it is ready to be placed under the
@@ -107,36 +105,50 @@ extern "C" {
* the order that the port expects to find them.
*
*/
#if (portUSING_MPU_WRAPPERS == 1)
#if (portHAS_STACK_OVERFLOW_CHECKING == 1)
StackType_t *pxPortInitialiseStack(StackType_t *pxTopOfStack, StackType_t *pxEndOfStack, TaskFunction_t pxCode, void *pvParameters, BaseType_t xRunPrivileged) PRIVILEGED_FUNCTION;
#else
StackType_t *pxPortInitialiseStack(StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters, BaseType_t xRunPrivileged) PRIVILEGED_FUNCTION;
#endif
#else
#if (portHAS_STACK_OVERFLOW_CHECKING == 1)
StackType_t *pxPortInitialiseStack(StackType_t *pxTopOfStack, StackType_t *pxEndOfStack, TaskFunction_t pxCode, void *pvParameters) PRIVILEGED_FUNCTION;
#else
StackType_t *pxPortInitialiseStack(StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters) PRIVILEGED_FUNCTION;
#endif
#endif
#if ( portUSING_MPU_WRAPPERS == 1 )
#if ( portHAS_STACK_OVERFLOW_CHECKING == 1 )
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
StackType_t * pxEndOfStack,
TaskFunction_t pxCode,
void * pvParameters,
BaseType_t xRunPrivileged ) PRIVILEGED_FUNCTION;
#else
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters,
BaseType_t xRunPrivileged ) PRIVILEGED_FUNCTION;
#endif
#else /* if ( portUSING_MPU_WRAPPERS == 1 ) */
#if ( portHAS_STACK_OVERFLOW_CHECKING == 1 )
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
StackType_t * pxEndOfStack,
TaskFunction_t pxCode,
void * pvParameters ) PRIVILEGED_FUNCTION;
#else
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters ) PRIVILEGED_FUNCTION;
#endif
#endif /* if ( portUSING_MPU_WRAPPERS == 1 ) */
/* Used by heap_5.c to define the start address and size of each memory region
that together comprise the total FreeRTOS heap space. */
typedef struct HeapRegion {
uint8_t *pucStartAddress;
size_t xSizeInBytes;
* that together comprise the total FreeRTOS heap space. */
typedef struct HeapRegion
{
uint8_t * pucStartAddress;
size_t xSizeInBytes;
} HeapRegion_t;
/* Used to pass information about the heap out of vPortGetHeapStats(). */
typedef struct xHeapStats {
size_t xAvailableHeapSpaceInBytes; /* The total heap size currently available - this is the sum of all the free blocks, not the largest block that can be allocated. */
size_t xSizeOfLargestFreeBlockInBytes; /* The maximum size, in bytes, of all the free blocks within the heap at the time vPortGetHeapStats() is called. */
size_t xSizeOfSmallestFreeBlockInBytes; /* The minimum size, in bytes, of all the free blocks within the heap at the time vPortGetHeapStats() is called. */
size_t xNumberOfFreeBlocks; /* The number of free memory blocks within the heap at the time vPortGetHeapStats() is called. */
size_t xMinimumEverFreeBytesRemaining; /* The minimum amount of total free memory (sum of all free blocks) there has been in the heap since the system booted. */
size_t xNumberOfSuccessfulAllocations; /* The number of calls to pvPortMalloc() that have returned a valid memory block. */
size_t xNumberOfSuccessfulFrees; /* The number of calls to vPortFree() that has successfully freed a block of memory. */
typedef struct xHeapStats
{
size_t xAvailableHeapSpaceInBytes; /* The total heap size currently available - this is the sum of all the free blocks, not the largest block that can be allocated. */
size_t xSizeOfLargestFreeBlockInBytes; /* The maximum size, in bytes, of all the free blocks within the heap at the time vPortGetHeapStats() is called. */
size_t xSizeOfSmallestFreeBlockInBytes; /* The minimum size, in bytes, of all the free blocks within the heap at the time vPortGetHeapStats() is called. */
size_t xNumberOfFreeBlocks; /* The number of free memory blocks within the heap at the time vPortGetHeapStats() is called. */
size_t xMinimumEverFreeBytesRemaining; /* The minimum amount of total free memory (sum of all free blocks) there has been in the heap since the system booted. */
size_t xNumberOfSuccessfulAllocations; /* The number of calls to pvPortMalloc() that have returned a valid memory block. */
size_t xNumberOfSuccessfulFrees; /* The number of calls to vPortFree() that has successfully freed a block of memory. */
} HeapStats_t;
/*
@@ -150,35 +162,35 @@ typedef struct xHeapStats {
* terminated by a HeapRegions_t structure that has a size of 0. The region
* with the lowest start address must appear first in the array.
*/
void vPortDefineHeapRegions(const HeapRegion_t *const pxHeapRegions) PRIVILEGED_FUNCTION;
void vPortDefineHeapRegions( const HeapRegion_t * const pxHeapRegions ) PRIVILEGED_FUNCTION;
/*
* Returns a HeapStats_t structure filled with information about the current
* heap state.
*/
void vPortGetHeapStats(HeapStats_t *pxHeapStats);
void vPortGetHeapStats( HeapStats_t * pxHeapStats );
/*
* Map to the memory management routines required for the port.
*/
void *pvPortMalloc(size_t xSize) PRIVILEGED_FUNCTION;
void vPortFree(void *pv) PRIVILEGED_FUNCTION;
void vPortInitialiseBlocks(void) PRIVILEGED_FUNCTION;
size_t xPortGetFreeHeapSize(void) PRIVILEGED_FUNCTION;
size_t xPortGetMinimumEverFreeHeapSize(void) PRIVILEGED_FUNCTION;
void * pvPortMalloc( size_t xSize ) PRIVILEGED_FUNCTION;
void vPortFree( void * pv ) PRIVILEGED_FUNCTION;
void vPortInitialiseBlocks( void ) PRIVILEGED_FUNCTION;
size_t xPortGetFreeHeapSize( void ) PRIVILEGED_FUNCTION;
size_t xPortGetMinimumEverFreeHeapSize( void ) PRIVILEGED_FUNCTION;
/*
* Setup the hardware ready for the scheduler to take control. This generally
* sets up a tick interrupt and sets timers for the correct tick frequency.
*/
BaseType_t xPortStartScheduler(void) PRIVILEGED_FUNCTION;
BaseType_t xPortStartScheduler( void ) PRIVILEGED_FUNCTION;
/*
* Undo any hardware/ISR setup that was performed by xPortStartScheduler() so
* the hardware is left in its original condition after the scheduler stops
* executing.
*/
void vPortEndScheduler(void) PRIVILEGED_FUNCTION;
void vPortEndScheduler( void ) PRIVILEGED_FUNCTION;
/*
* The structures and methods of manipulating the MPU are contained within the
@@ -187,13 +199,18 @@ void vPortEndScheduler(void) PRIVILEGED_FUNCTION;
* Fills the xMPUSettings structure with the memory region information
* contained in xRegions.
*/
#if (portUSING_MPU_WRAPPERS == 1)
struct xMEMORY_REGION;
void vPortStoreTaskMPUSettings(xMPU_SETTINGS *xMPUSettings, const struct xMEMORY_REGION *const xRegions, StackType_t *pxBottomOfStack, uint32_t ulStackDepth) PRIVILEGED_FUNCTION;
#if ( portUSING_MPU_WRAPPERS == 1 )
struct xMEMORY_REGION;
void vPortStoreTaskMPUSettings( xMPU_SETTINGS * xMPUSettings,
const struct xMEMORY_REGION * const xRegions,
StackType_t * pxBottomOfStack,
uint32_t ulStackDepth ) PRIVILEGED_FUNCTION;
#endif
/* *INDENT-OFF* */
#ifdef __cplusplus
}
}
#endif
/* *INDENT-ON* */
#endif /* PORTABLE_H */

136
source/Middlewares/Third_Party/FreeRTOS/Source/include/projdefs.h vendored
View File

@@ -1,5 +1,5 @@
/*
* FreeRTOS Kernel V10.3.1
* FreeRTOS Kernel V10.4.1
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
@@ -19,10 +19,9 @@
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
* 1 tab == 4 spaces!
*/
#ifndef PROJDEFS_H
@@ -32,93 +31,90 @@
* Defines the prototype to which task functions must conform. Defined in this
* file to ensure the type is known before portable.h is included.
*/
typedef void (*TaskFunction_t)( void * );
typedef void (* TaskFunction_t)( void * );
/* Converts a time in milliseconds to a time in ticks. This macro can be
overridden by a macro of the same name defined in FreeRTOSConfig.h in case the
definition here is not suitable for your application. */
* overridden by a macro of the same name defined in FreeRTOSConfig.h in case the
* definition here is not suitable for your application. */
#ifndef pdMS_TO_TICKS
#define pdMS_TO_TICKS( xTimeInMs ) ( ( TickType_t ) ( ( ( TickType_t ) ( xTimeInMs ) * ( TickType_t ) configTICK_RATE_HZ ) / ( TickType_t ) 1000 ) )
#define pdMS_TO_TICKS( xTimeInMs ) ( ( TickType_t ) ( ( ( TickType_t ) ( xTimeInMs ) * ( TickType_t ) configTICK_RATE_HZ ) / ( TickType_t ) 1000U ) )
#endif
#define pdFALSE ( ( BaseType_t ) 0 )
#define pdTRUE ( ( BaseType_t ) 1 )
#define pdFALSE ( ( BaseType_t ) 0 )
#define pdTRUE ( ( BaseType_t ) 1 )
#define pdPASS ( pdTRUE )
#define pdFAIL ( pdFALSE )
#define errQUEUE_EMPTY ( ( BaseType_t ) 0 )
#define errQUEUE_FULL ( ( BaseType_t ) 0 )
#define pdPASS ( pdTRUE )
#define pdFAIL ( pdFALSE )
#define errQUEUE_EMPTY ( ( BaseType_t ) 0 )
#define errQUEUE_FULL ( ( BaseType_t ) 0 )
/* FreeRTOS error definitions. */
#define errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY ( -1 )
#define errQUEUE_BLOCKED ( -4 )
#define errQUEUE_YIELD ( -5 )
#define errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY ( -1 )
#define errQUEUE_BLOCKED ( -4 )
#define errQUEUE_YIELD ( -5 )
/* Macros used for basic data corruption checks. */
#ifndef configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES
#define configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES 0
#define configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES 0
#endif
#if( configUSE_16_BIT_TICKS == 1 )
#define pdINTEGRITY_CHECK_VALUE 0x5a5a
#if ( configUSE_16_BIT_TICKS == 1 )
#define pdINTEGRITY_CHECK_VALUE 0x5a5a
#else
#define pdINTEGRITY_CHECK_VALUE 0x5a5a5a5aUL
#define pdINTEGRITY_CHECK_VALUE 0x5a5a5a5aUL
#endif
/* The following errno values are used by FreeRTOS+ components, not FreeRTOS
itself. */
#define pdFREERTOS_ERRNO_NONE 0 /* No errors */
#define pdFREERTOS_ERRNO_ENOENT 2 /* No such file or directory */
#define pdFREERTOS_ERRNO_EINTR 4 /* Interrupted system call */
#define pdFREERTOS_ERRNO_EIO 5 /* I/O error */
#define pdFREERTOS_ERRNO_ENXIO 6 /* No such device or address */
#define pdFREERTOS_ERRNO_EBADF 9 /* Bad file number */
#define pdFREERTOS_ERRNO_EAGAIN 11 /* No more processes */
#define pdFREERTOS_ERRNO_EWOULDBLOCK 11 /* Operation would block */
#define pdFREERTOS_ERRNO_ENOMEM 12 /* Not enough memory */
#define pdFREERTOS_ERRNO_EACCES 13 /* Permission denied */
#define pdFREERTOS_ERRNO_EFAULT 14 /* Bad address */
#define pdFREERTOS_ERRNO_EBUSY 16 /* Mount device busy */
#define pdFREERTOS_ERRNO_EEXIST 17 /* File exists */
#define pdFREERTOS_ERRNO_EXDEV 18 /* Cross-device link */
#define pdFREERTOS_ERRNO_ENODEV 19 /* No such device */
#define pdFREERTOS_ERRNO_ENOTDIR 20 /* Not a directory */
#define pdFREERTOS_ERRNO_EISDIR 21 /* Is a directory */
#define pdFREERTOS_ERRNO_EINVAL 22 /* Invalid argument */
#define pdFREERTOS_ERRNO_ENOSPC 28 /* No space left on device */
#define pdFREERTOS_ERRNO_ESPIPE 29 /* Illegal seek */
#define pdFREERTOS_ERRNO_EROFS 30 /* Read only file system */
#define pdFREERTOS_ERRNO_EUNATCH 42 /* Protocol driver not attached */
#define pdFREERTOS_ERRNO_EBADE 50 /* Invalid exchange */
#define pdFREERTOS_ERRNO_EFTYPE 79 /* Inappropriate file type or format */
#define pdFREERTOS_ERRNO_ENMFILE 89 /* No more files */
#define pdFREERTOS_ERRNO_ENOTEMPTY 90 /* Directory not empty */
#define pdFREERTOS_ERRNO_ENAMETOOLONG 91 /* File or path name too long */
#define pdFREERTOS_ERRNO_EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define pdFREERTOS_ERRNO_ENOBUFS 105 /* No buffer space available */
#define pdFREERTOS_ERRNO_ENOPROTOOPT 109 /* Protocol not available */
#define pdFREERTOS_ERRNO_EADDRINUSE 112 /* Address already in use */
#define pdFREERTOS_ERRNO_ETIMEDOUT 116 /* Connection timed out */
#define pdFREERTOS_ERRNO_EINPROGRESS 119 /* Connection already in progress */
#define pdFREERTOS_ERRNO_EALREADY 120 /* Socket already connected */
#define pdFREERTOS_ERRNO_EADDRNOTAVAIL 125 /* Address not available */
#define pdFREERTOS_ERRNO_EISCONN 127 /* Socket is already connected */
#define pdFREERTOS_ERRNO_ENOTCONN 128 /* Socket is not connected */
#define pdFREERTOS_ERRNO_ENOMEDIUM 135 /* No medium inserted */
#define pdFREERTOS_ERRNO_EILSEQ 138 /* An invalid UTF-16 sequence was encountered. */
#define pdFREERTOS_ERRNO_ECANCELED 140 /* Operation canceled. */
* itself. */
#define pdFREERTOS_ERRNO_NONE 0 /* No errors */
#define pdFREERTOS_ERRNO_ENOENT 2 /* No such file or directory */
#define pdFREERTOS_ERRNO_EINTR 4 /* Interrupted system call */
#define pdFREERTOS_ERRNO_EIO 5 /* I/O error */
#define pdFREERTOS_ERRNO_ENXIO 6 /* No such device or address */
#define pdFREERTOS_ERRNO_EBADF 9 /* Bad file number */
#define pdFREERTOS_ERRNO_EAGAIN 11 /* No more processes */
#define pdFREERTOS_ERRNO_EWOULDBLOCK 11 /* Operation would block */
#define pdFREERTOS_ERRNO_ENOMEM 12 /* Not enough memory */
#define pdFREERTOS_ERRNO_EACCES 13 /* Permission denied */
#define pdFREERTOS_ERRNO_EFAULT 14 /* Bad address */
#define pdFREERTOS_ERRNO_EBUSY 16 /* Mount device busy */
#define pdFREERTOS_ERRNO_EEXIST 17 /* File exists */
#define pdFREERTOS_ERRNO_EXDEV 18 /* Cross-device link */
#define pdFREERTOS_ERRNO_ENODEV 19 /* No such device */
#define pdFREERTOS_ERRNO_ENOTDIR 20 /* Not a directory */
#define pdFREERTOS_ERRNO_EISDIR 21 /* Is a directory */
#define pdFREERTOS_ERRNO_EINVAL 22 /* Invalid argument */
#define pdFREERTOS_ERRNO_ENOSPC 28 /* No space left on device */
#define pdFREERTOS_ERRNO_ESPIPE 29 /* Illegal seek */
#define pdFREERTOS_ERRNO_EROFS 30 /* Read only file system */
#define pdFREERTOS_ERRNO_EUNATCH 42 /* Protocol driver not attached */
#define pdFREERTOS_ERRNO_EBADE 50 /* Invalid exchange */
#define pdFREERTOS_ERRNO_EFTYPE 79 /* Inappropriate file type or format */
#define pdFREERTOS_ERRNO_ENMFILE 89 /* No more files */
#define pdFREERTOS_ERRNO_ENOTEMPTY 90 /* Directory not empty */
#define pdFREERTOS_ERRNO_ENAMETOOLONG 91 /* File or path name too long */
#define pdFREERTOS_ERRNO_EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define pdFREERTOS_ERRNO_ENOBUFS 105 /* No buffer space available */
#define pdFREERTOS_ERRNO_ENOPROTOOPT 109 /* Protocol not available */
#define pdFREERTOS_ERRNO_EADDRINUSE 112 /* Address already in use */
#define pdFREERTOS_ERRNO_ETIMEDOUT 116 /* Connection timed out */
#define pdFREERTOS_ERRNO_EINPROGRESS 119 /* Connection already in progress */
#define pdFREERTOS_ERRNO_EALREADY 120 /* Socket already connected */
#define pdFREERTOS_ERRNO_EADDRNOTAVAIL 125 /* Address not available */
#define pdFREERTOS_ERRNO_EISCONN 127 /* Socket is already connected */
#define pdFREERTOS_ERRNO_ENOTCONN 128 /* Socket is not connected */
#define pdFREERTOS_ERRNO_ENOMEDIUM 135 /* No medium inserted */
#define pdFREERTOS_ERRNO_EILSEQ 138 /* An invalid UTF-16 sequence was encountered. */
#define pdFREERTOS_ERRNO_ECANCELED 140 /* Operation canceled. */
/* The following endian values are used by FreeRTOS+ components, not FreeRTOS
itself. */
#define pdFREERTOS_LITTLE_ENDIAN 0
#define pdFREERTOS_BIG_ENDIAN 1
* itself. */
#define pdFREERTOS_LITTLE_ENDIAN 0
#define pdFREERTOS_BIG_ENDIAN 1
/* Re-defining endian values for generic naming. */
#define pdLITTLE_ENDIAN pdFREERTOS_LITTLE_ENDIAN
#define pdBIG_ENDIAN pdFREERTOS_BIG_ENDIAN
#define pdLITTLE_ENDIAN pdFREERTOS_LITTLE_ENDIAN
#define pdBIG_ENDIAN pdFREERTOS_BIG_ENDIAN
#endif /* PROJDEFS_H */

3371
source/Middlewares/Third_Party/FreeRTOS/Source/include/queue.h vendored
View File

File diff suppressed because it is too large Load Diff

979
source/Middlewares/Third_Party/FreeRTOS/Source/include/semphr.h vendored
View File

File diff suppressed because it is too large Load Diff

118
source/Middlewares/Third_Party/FreeRTOS/Source/include/stack_macros.h vendored
View File

@@ -1,5 +1,5 @@
/*
* FreeRTOS Kernel V10.3.1
* FreeRTOS Kernel V10.4.1
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
@@ -19,10 +19,9 @@
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
* 1 tab == 4 spaces!
*/
#ifndef STACK_MACROS_H
@@ -44,86 +43,85 @@
/*-----------------------------------------------------------*/
#if( ( configCHECK_FOR_STACK_OVERFLOW == 1 ) && ( portSTACK_GROWTH < 0 ) )
#if ( ( configCHECK_FOR_STACK_OVERFLOW == 1 ) && ( portSTACK_GROWTH < 0 ) )
/* Only the current stack state is to be checked. */
#define taskCHECK_FOR_STACK_OVERFLOW() \
{ \
/* Is the currently saved stack pointer within the stack limit? */ \
if( pxCurrentTCB->pxTopOfStack <= pxCurrentTCB->pxStack ) \
{ \
vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
} \
}
/* Only the current stack state is to be checked. */
#define taskCHECK_FOR_STACK_OVERFLOW() \
{ \
/* Is the currently saved stack pointer within the stack limit? */ \
if( pxCurrentTCB->pxTopOfStack <= pxCurrentTCB->pxStack ) \
{ \
vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
} \
}
#endif /* configCHECK_FOR_STACK_OVERFLOW == 1 */
/*-----------------------------------------------------------*/
#if( ( configCHECK_FOR_STACK_OVERFLOW == 1 ) && ( portSTACK_GROWTH > 0 ) )
#if ( ( configCHECK_FOR_STACK_OVERFLOW == 1 ) && ( portSTACK_GROWTH > 0 ) )
/* Only the current stack state is to be checked. */
#define taskCHECK_FOR_STACK_OVERFLOW() \
{ \
\
/* Is the currently saved stack pointer within the stack limit? */ \
if( pxCurrentTCB->pxTopOfStack >= pxCurrentTCB->pxEndOfStack ) \
{ \
vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
} \
}
/* Only the current stack state is to be checked. */
#define taskCHECK_FOR_STACK_OVERFLOW() \
{ \
\
/* Is the currently saved stack pointer within the stack limit? */ \
if( pxCurrentTCB->pxTopOfStack >= pxCurrentTCB->pxEndOfStack ) \
{ \
vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
} \
}
#endif /* configCHECK_FOR_STACK_OVERFLOW == 1 */
/*-----------------------------------------------------------*/
#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH < 0 ) )
#if ( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH < 0 ) )
#define taskCHECK_FOR_STACK_OVERFLOW() \
{ \
const uint32_t * const pulStack = ( uint32_t * ) pxCurrentTCB->pxStack; \
const uint32_t ulCheckValue = ( uint32_t ) 0xa5a5a5a5; \
\
if( ( pulStack[ 0 ] != ulCheckValue ) || \
( pulStack[ 1 ] != ulCheckValue ) || \
( pulStack[ 2 ] != ulCheckValue ) || \
( pulStack[ 3 ] != ulCheckValue ) ) \
{ \
vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
} \
}
#define taskCHECK_FOR_STACK_OVERFLOW() \
{ \
const uint32_t * const pulStack = ( uint32_t * ) pxCurrentTCB->pxStack; \
const uint32_t ulCheckValue = ( uint32_t ) 0xa5a5a5a5; \
\
if( ( pulStack[ 0 ] != ulCheckValue ) || \
( pulStack[ 1 ] != ulCheckValue ) || \
( pulStack[ 2 ] != ulCheckValue ) || \
( pulStack[ 3 ] != ulCheckValue ) ) \
{ \
vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
} \
}
#endif /* #if( configCHECK_FOR_STACK_OVERFLOW > 1 ) */
/*-----------------------------------------------------------*/
#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH > 0 ) )
#if ( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH > 0 ) )
#define taskCHECK_FOR_STACK_OVERFLOW() \
{ \
int8_t *pcEndOfStack = ( int8_t * ) pxCurrentTCB->pxEndOfStack; \
static const uint8_t ucExpectedStackBytes[] = { tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE }; \
\
\
pcEndOfStack -= sizeof( ucExpectedStackBytes ); \
\
/* Has the extremity of the task stack ever been written over? */ \
if( memcmp( ( void * ) pcEndOfStack, ( void * ) ucExpectedStackBytes, sizeof( ucExpectedStackBytes ) ) != 0 ) \
{ \
vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
} \
}
#define taskCHECK_FOR_STACK_OVERFLOW() \
{ \
int8_t * pcEndOfStack = ( int8_t * ) pxCurrentTCB->pxEndOfStack; \
static const uint8_t ucExpectedStackBytes[] = { tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE }; \
\
\
pcEndOfStack -= sizeof( ucExpectedStackBytes ); \
\
/* Has the extremity of the task stack ever been written over? */ \
if( memcmp( ( void * ) pcEndOfStack, ( void * ) ucExpectedStackBytes, sizeof( ucExpectedStackBytes ) ) != 0 ) \
{ \
vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
} \
}
#endif /* #if( configCHECK_FOR_STACK_OVERFLOW > 1 ) */
/*-----------------------------------------------------------*/
/* Remove stack overflow macro if not being used. */
#ifndef taskCHECK_FOR_STACK_OVERFLOW
#define taskCHECK_FOR_STACK_OVERFLOW()
#define taskCHECK_FOR_STACK_OVERFLOW()
#endif
#endif /* STACK_MACROS_H */

546
source/Middlewares/Third_Party/FreeRTOS/Source/include/stream_buffer.h vendored
View File

@@ -1,5 +1,5 @@
/*
* FreeRTOS Kernel V10.3.1
* FreeRTOS Kernel V10.4.1
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
@@ -19,10 +19,9 @@
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
* 1 tab == 4 spaces!
*/
/*
@@ -52,12 +51,14 @@
#define STREAM_BUFFER_H
#ifndef INC_FREERTOS_H
#error "include FreeRTOS.h must appear in source files before include stream_buffer.h"
#error "include FreeRTOS.h must appear in source files before include stream_buffer.h"
#endif
/* *INDENT-OFF* */
#if defined( __cplusplus )
extern "C" {
extern "C" {
#endif
/* *INDENT-ON* */
/**
* Type by which stream buffers are referenced. For example, a call to
@@ -72,9 +73,9 @@ typedef struct StreamBufferDef_t * StreamBufferHandle_t;
/**
* message_buffer.h
*
<pre>
StreamBufferHandle_t xStreamBufferCreate( size_t xBufferSizeBytes, size_t xTriggerLevelBytes );
</pre>
* <pre>
* StreamBufferHandle_t xStreamBufferCreate( size_t xBufferSizeBytes, size_t xTriggerLevelBytes );
* </pre>
*
* Creates a new stream buffer using dynamically allocated memory. See
* xStreamBufferCreateStatic() for a version that uses statically allocated
@@ -108,43 +109,43 @@ StreamBufferHandle_t xStreamBufferCreate( size_t xBufferSizeBytes, size_t xTrigg
* buffer.
*
* Example use:
<pre>
void vAFunction( void )
{
StreamBufferHandle_t xStreamBuffer;
const size_t xStreamBufferSizeBytes = 100, xTriggerLevel = 10;
// Create a stream buffer that can hold 100 bytes. The memory used to hold
// both the stream buffer structure and the data in the stream buffer is
// allocated dynamically.
xStreamBuffer = xStreamBufferCreate( xStreamBufferSizeBytes, xTriggerLevel );
if( xStreamBuffer == NULL )
{
// There was not enough heap memory space available to create the
// stream buffer.
}
else
{
// The stream buffer was created successfully and can now be used.
}
}
</pre>
* <pre>
*
* void vAFunction( void )
* {
* StreamBufferHandle_t xStreamBuffer;
* const size_t xStreamBufferSizeBytes = 100, xTriggerLevel = 10;
*
* // Create a stream buffer that can hold 100 bytes. The memory used to hold
* // both the stream buffer structure and the data in the stream buffer is
* // allocated dynamically.
* xStreamBuffer = xStreamBufferCreate( xStreamBufferSizeBytes, xTriggerLevel );
*
* if( xStreamBuffer == NULL )
* {
* // There was not enough heap memory space available to create the
* // stream buffer.
* }
* else
* {
* // The stream buffer was created successfully and can now be used.
* }
* }
* </pre>
* \defgroup xStreamBufferCreate xStreamBufferCreate
* \ingroup StreamBufferManagement
*/
#define xStreamBufferCreate( xBufferSizeBytes, xTriggerLevelBytes ) xStreamBufferGenericCreate( xBufferSizeBytes, xTriggerLevelBytes, pdFALSE )
#define xStreamBufferCreate( xBufferSizeBytes, xTriggerLevelBytes ) xStreamBufferGenericCreate( xBufferSizeBytes, xTriggerLevelBytes, pdFALSE )
/**
* stream_buffer.h
*
<pre>
StreamBufferHandle_t xStreamBufferCreateStatic( size_t xBufferSizeBytes,
size_t xTriggerLevelBytes,
uint8_t *pucStreamBufferStorageArea,
StaticStreamBuffer_t *pxStaticStreamBuffer );
</pre>
* <pre>
* StreamBufferHandle_t xStreamBufferCreateStatic( size_t xBufferSizeBytes,
* size_t xTriggerLevelBytes,
* uint8_t *pucStreamBufferStorageArea,
* StaticStreamBuffer_t *pxStaticStreamBuffer );
* </pre>
* Creates a new stream buffer using statically allocated memory. See
* xStreamBufferCreate() for a version that uses dynamically allocated memory.
*
@@ -181,51 +182,52 @@ StreamBufferHandle_t xStreamBufferCreateStatic( size_t xBufferSizeBytes,
* pxStaticstreamBuffer are NULL then NULL is returned.
*
* Example use:
<pre>
// Used to dimension the array used to hold the streams. The available space
// will actually be one less than this, so 999.
#define STORAGE_SIZE_BYTES 1000
// Defines the memory that will actually hold the streams within the stream
// buffer.
static uint8_t ucStorageBuffer[ STORAGE_SIZE_BYTES ];
// The variable used to hold the stream buffer structure.
StaticStreamBuffer_t xStreamBufferStruct;
void MyFunction( void )
{
StreamBufferHandle_t xStreamBuffer;
const size_t xTriggerLevel = 1;
xStreamBuffer = xStreamBufferCreateStatic( sizeof( ucBufferStorage ),
xTriggerLevel,
ucBufferStorage,
&xStreamBufferStruct );
// As neither the pucStreamBufferStorageArea or pxStaticStreamBuffer
// parameters were NULL, xStreamBuffer will not be NULL, and can be used to
// reference the created stream buffer in other stream buffer API calls.
// Other code that uses the stream buffer can go here.
}
</pre>
* <pre>
*
* // Used to dimension the array used to hold the streams. The available space
* // will actually be one less than this, so 999.
#define STORAGE_SIZE_BYTES 1000
*
* // Defines the memory that will actually hold the streams within the stream
* // buffer.
* static uint8_t ucStorageBuffer[ STORAGE_SIZE_BYTES ];
*
* // The variable used to hold the stream buffer structure.
* StaticStreamBuffer_t xStreamBufferStruct;
*
* void MyFunction( void )
* {
* StreamBufferHandle_t xStreamBuffer;
* const size_t xTriggerLevel = 1;
*
* xStreamBuffer = xStreamBufferCreateStatic( sizeof( ucBufferStorage ),
* xTriggerLevel,
* ucBufferStorage,
* &xStreamBufferStruct );
*
* // As neither the pucStreamBufferStorageArea or pxStaticStreamBuffer
* // parameters were NULL, xStreamBuffer will not be NULL, and can be used to
* // reference the created stream buffer in other stream buffer API calls.
*
* // Other code that uses the stream buffer can go here.
* }
*
* </pre>
* \defgroup xStreamBufferCreateStatic xStreamBufferCreateStatic
* \ingroup StreamBufferManagement
*/
#define xStreamBufferCreateStatic( xBufferSizeBytes, xTriggerLevelBytes, pucStreamBufferStorageArea, pxStaticStreamBuffer ) xStreamBufferGenericCreateStatic( xBufferSizeBytes, xTriggerLevelBytes, pdFALSE, pucStreamBufferStorageArea, pxStaticStreamBuffer )
#define xStreamBufferCreateStatic( xBufferSizeBytes, xTriggerLevelBytes, pucStreamBufferStorageArea, pxStaticStreamBuffer ) \
xStreamBufferGenericCreateStatic( xBufferSizeBytes, xTriggerLevelBytes, pdFALSE, pucStreamBufferStorageArea, pxStaticStreamBuffer )
/**
* stream_buffer.h
*
<pre>
size_t xStreamBufferSend( StreamBufferHandle_t xStreamBuffer,
const void *pvTxData,
size_t xDataLengthBytes,
TickType_t xTicksToWait );
</pre>
* <pre>
* size_t xStreamBufferSend( StreamBufferHandle_t xStreamBuffer,
* const void *pvTxData,
* size_t xDataLengthBytes,
* TickType_t xTicksToWait );
* </pre>
*
* Sends bytes to a stream buffer. The bytes are copied into the stream buffer.
*
@@ -275,54 +277,54 @@ size_t xStreamBufferSend( StreamBufferHandle_t xStreamBuffer,
* write as many bytes as possible.
*
* Example use:
<pre>
void vAFunction( StreamBufferHandle_t xStreamBuffer )
{
size_t xBytesSent;
uint8_t ucArrayToSend[] = { 0, 1, 2, 3 };
char *pcStringToSend = "String to send";
const TickType_t x100ms = pdMS_TO_TICKS( 100 );
// Send an array to the stream buffer, blocking for a maximum of 100ms to
// wait for enough space to be available in the stream buffer.
xBytesSent = xStreamBufferSend( xStreamBuffer, ( void * ) ucArrayToSend, sizeof( ucArrayToSend ), x100ms );
if( xBytesSent != sizeof( ucArrayToSend ) )
{
// The call to xStreamBufferSend() times out before there was enough
// space in the buffer for the data to be written, but it did
// successfully write xBytesSent bytes.
}
// Send the string to the stream buffer. Return immediately if there is not
// enough space in the buffer.
xBytesSent = xStreamBufferSend( xStreamBuffer, ( void * ) pcStringToSend, strlen( pcStringToSend ), 0 );
if( xBytesSent != strlen( pcStringToSend ) )
{
// The entire string could not be added to the stream buffer because
// there was not enough free space in the buffer, but xBytesSent bytes
// were sent. Could try again to send the remaining bytes.
}
}
</pre>
* <pre>
* void vAFunction( StreamBufferHandle_t xStreamBuffer )
* {
* size_t xBytesSent;
* uint8_t ucArrayToSend[] = { 0, 1, 2, 3 };
* char *pcStringToSend = "String to send";
* const TickType_t x100ms = pdMS_TO_TICKS( 100 );
*
* // Send an array to the stream buffer, blocking for a maximum of 100ms to
* // wait for enough space to be available in the stream buffer.
* xBytesSent = xStreamBufferSend( xStreamBuffer, ( void * ) ucArrayToSend, sizeof( ucArrayToSend ), x100ms );
*
* if( xBytesSent != sizeof( ucArrayToSend ) )
* {
* // The call to xStreamBufferSend() times out before there was enough
* // space in the buffer for the data to be written, but it did
* // successfully write xBytesSent bytes.
* }
*
* // Send the string to the stream buffer. Return immediately if there is not
* // enough space in the buffer.
* xBytesSent = xStreamBufferSend( xStreamBuffer, ( void * ) pcStringToSend, strlen( pcStringToSend ), 0 );
*
* if( xBytesSent != strlen( pcStringToSend ) )
* {
* // The entire string could not be added to the stream buffer because
* // there was not enough free space in the buffer, but xBytesSent bytes
* // were sent. Could try again to send the remaining bytes.
* }
* }
* </pre>
* \defgroup xStreamBufferSend xStreamBufferSend
* \ingroup StreamBufferManagement
*/
size_t xStreamBufferSend( StreamBufferHandle_t xStreamBuffer,
const void *pvTxData,
size_t xDataLengthBytes,
TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
const void * pvTxData,
size_t xDataLengthBytes,
TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
/**
* stream_buffer.h
*
<pre>
size_t xStreamBufferSendFromISR( StreamBufferHandle_t xStreamBuffer,
const void *pvTxData,
size_t xDataLengthBytes,
BaseType_t *pxHigherPriorityTaskWoken );
</pre>
* <pre>
* size_t xStreamBufferSendFromISR( StreamBufferHandle_t xStreamBuffer,
* const void *pvTxData,
* size_t xDataLengthBytes,
* BaseType_t *pxHigherPriorityTaskWoken );
* </pre>
*
* Interrupt safe version of the API function that sends a stream of bytes to
* the stream buffer.
@@ -374,56 +376,56 @@ size_t xStreamBufferSendFromISR( StreamBufferHandle_t xStreamBuffer,
* space for all the bytes to be written.
*
* Example use:
<pre>
// A stream buffer that has already been created.
StreamBufferHandle_t xStreamBuffer;
void vAnInterruptServiceRoutine( void )
{
size_t xBytesSent;
char *pcStringToSend = "String to send";
BaseType_t xHigherPriorityTaskWoken = pdFALSE; // Initialised to pdFALSE.
// Attempt to send the string to the stream buffer.
xBytesSent = xStreamBufferSendFromISR( xStreamBuffer,
( void * ) pcStringToSend,
strlen( pcStringToSend ),
&xHigherPriorityTaskWoken );
if( xBytesSent != strlen( pcStringToSend ) )
{
// There was not enough free space in the stream buffer for the entire
// string to be written, ut xBytesSent bytes were written.
}
// If xHigherPriorityTaskWoken was set to pdTRUE inside
// xStreamBufferSendFromISR() then a task that has a priority above the
// priority of the currently executing task was unblocked and a context
// switch should be performed to ensure the ISR returns to the unblocked
// task. In most FreeRTOS ports this is done by simply passing
// xHigherPriorityTaskWoken into taskYIELD_FROM_ISR(), which will test the
// variables value, and perform the context switch if necessary. Check the
// documentation for the port in use for port specific instructions.
taskYIELD_FROM_ISR( xHigherPriorityTaskWoken );
}
</pre>
* <pre>
* // A stream buffer that has already been created.
* StreamBufferHandle_t xStreamBuffer;
*
* void vAnInterruptServiceRoutine( void )
* {
* size_t xBytesSent;
* char *pcStringToSend = "String to send";
* BaseType_t xHigherPriorityTaskWoken = pdFALSE; // Initialised to pdFALSE.
*
* // Attempt to send the string to the stream buffer.
* xBytesSent = xStreamBufferSendFromISR( xStreamBuffer,
* ( void * ) pcStringToSend,
* strlen( pcStringToSend ),
* &xHigherPriorityTaskWoken );
*
* if( xBytesSent != strlen( pcStringToSend ) )
* {
* // There was not enough free space in the stream buffer for the entire
* // string to be written, ut xBytesSent bytes were written.
* }
*
* // If xHigherPriorityTaskWoken was set to pdTRUE inside
* // xStreamBufferSendFromISR() then a task that has a priority above the
* // priority of the currently executing task was unblocked and a context
* // switch should be performed to ensure the ISR returns to the unblocked
* // task. In most FreeRTOS ports this is done by simply passing
* // xHigherPriorityTaskWoken into taskYIELD_FROM_ISR(), which will test the
* // variables value, and perform the context switch if necessary. Check the
* // documentation for the port in use for port specific instructions.
* taskYIELD_FROM_ISR( xHigherPriorityTaskWoken );
* }
* </pre>
* \defgroup xStreamBufferSendFromISR xStreamBufferSendFromISR
* \ingroup StreamBufferManagement
*/
size_t xStreamBufferSendFromISR( StreamBufferHandle_t xStreamBuffer,
const void *pvTxData,
size_t xDataLengthBytes,
BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
const void * pvTxData,
size_t xDataLengthBytes,
BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
/**
* stream_buffer.h
*
<pre>
size_t xStreamBufferReceive( StreamBufferHandle_t xStreamBuffer,
void *pvRxData,
size_t xBufferLengthBytes,
TickType_t xTicksToWait );
</pre>
* <pre>
* size_t xStreamBufferReceive( StreamBufferHandle_t xStreamBuffer,
* void *pvRxData,
* size_t xBufferLengthBytes,
* TickType_t xTicksToWait );
* </pre>
*
* Receives bytes from a stream buffer.
*
@@ -473,46 +475,46 @@ size_t xStreamBufferReceive( StreamBufferHandle_t xStreamBuffer,
* out before xBufferLengthBytes were available.
*
* Example use:
<pre>
void vAFunction( StreamBuffer_t xStreamBuffer )
{
uint8_t ucRxData[ 20 ];
size_t xReceivedBytes;
const TickType_t xBlockTime = pdMS_TO_TICKS( 20 );
// Receive up to another sizeof( ucRxData ) bytes from the stream buffer.
// Wait in the Blocked state (so not using any CPU processing time) for a
// maximum of 100ms for the full sizeof( ucRxData ) number of bytes to be
// available.
xReceivedBytes = xStreamBufferReceive( xStreamBuffer,
( void * ) ucRxData,
sizeof( ucRxData ),
xBlockTime );
if( xReceivedBytes > 0 )
{
// A ucRxData contains another xRecievedBytes bytes of data, which can
// be processed here....
}
}
</pre>
* <pre>
* void vAFunction( StreamBuffer_t xStreamBuffer )
* {
* uint8_t ucRxData[ 20 ];
* size_t xReceivedBytes;
* const TickType_t xBlockTime = pdMS_TO_TICKS( 20 );
*
* // Receive up to another sizeof( ucRxData ) bytes from the stream buffer.
* // Wait in the Blocked state (so not using any CPU processing time) for a
* // maximum of 100ms for the full sizeof( ucRxData ) number of bytes to be
* // available.
* xReceivedBytes = xStreamBufferReceive( xStreamBuffer,
* ( void * ) ucRxData,
* sizeof( ucRxData ),
* xBlockTime );
*
* if( xReceivedBytes > 0 )
* {
* // A ucRxData contains another xRecievedBytes bytes of data, which can
* // be processed here....
* }
* }
* </pre>
* \defgroup xStreamBufferReceive xStreamBufferReceive
* \ingroup StreamBufferManagement
*/
size_t xStreamBufferReceive( StreamBufferHandle_t xStreamBuffer,
void *pvRxData,
size_t xBufferLengthBytes,
TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
void * pvRxData,
size_t xBufferLengthBytes,
TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
/**
* stream_buffer.h
*
<pre>
size_t xStreamBufferReceiveFromISR( StreamBufferHandle_t xStreamBuffer,
void *pvRxData,
size_t xBufferLengthBytes,
BaseType_t *pxHigherPriorityTaskWoken );
</pre>
* <pre>
* size_t xStreamBufferReceiveFromISR( StreamBufferHandle_t xStreamBuffer,
* void *pvRxData,
* size_t xBufferLengthBytes,
* BaseType_t *pxHigherPriorityTaskWoken );
* </pre>
*
* An interrupt safe version of the API function that receives bytes from a
* stream buffer.
@@ -549,53 +551,53 @@ size_t xStreamBufferReceiveFromISR( StreamBufferHandle_t xStreamBuffer,
* @return The number of bytes read from the stream buffer, if any.
*
* Example use:
<pre>
// A stream buffer that has already been created.
StreamBuffer_t xStreamBuffer;
void vAnInterruptServiceRoutine( void )
{
uint8_t ucRxData[ 20 ];
size_t xReceivedBytes;
BaseType_t xHigherPriorityTaskWoken = pdFALSE; // Initialised to pdFALSE.
// Receive the next stream from the stream buffer.
xReceivedBytes = xStreamBufferReceiveFromISR( xStreamBuffer,
( void * ) ucRxData,
sizeof( ucRxData ),
&xHigherPriorityTaskWoken );
if( xReceivedBytes > 0 )
{
// ucRxData contains xReceivedBytes read from the stream buffer.
// Process the stream here....
}
// If xHigherPriorityTaskWoken was set to pdTRUE inside
// xStreamBufferReceiveFromISR() then a task that has a priority above the
// priority of the currently executing task was unblocked and a context
// switch should be performed to ensure the ISR returns to the unblocked
// task. In most FreeRTOS ports this is done by simply passing
// xHigherPriorityTaskWoken into taskYIELD_FROM_ISR(), which will test the
// variables value, and perform the context switch if necessary. Check the
// documentation for the port in use for port specific instructions.
taskYIELD_FROM_ISR( xHigherPriorityTaskWoken );
}
</pre>
* <pre>
* // A stream buffer that has already been created.
* StreamBuffer_t xStreamBuffer;
*
* void vAnInterruptServiceRoutine( void )
* {
* uint8_t ucRxData[ 20 ];
* size_t xReceivedBytes;
* BaseType_t xHigherPriorityTaskWoken = pdFALSE; // Initialised to pdFALSE.
*
* // Receive the next stream from the stream buffer.
* xReceivedBytes = xStreamBufferReceiveFromISR( xStreamBuffer,
* ( void * ) ucRxData,
* sizeof( ucRxData ),
* &xHigherPriorityTaskWoken );
*
* if( xReceivedBytes > 0 )
* {
* // ucRxData contains xReceivedBytes read from the stream buffer.
* // Process the stream here....
* }
*
* // If xHigherPriorityTaskWoken was set to pdTRUE inside
* // xStreamBufferReceiveFromISR() then a task that has a priority above the
* // priority of the currently executing task was unblocked and a context
* // switch should be performed to ensure the ISR returns to the unblocked
* // task. In most FreeRTOS ports this is done by simply passing
* // xHigherPriorityTaskWoken into taskYIELD_FROM_ISR(), which will test the
* // variables value, and perform the context switch if necessary. Check the
* // documentation for the port in use for port specific instructions.
* taskYIELD_FROM_ISR( xHigherPriorityTaskWoken );
* }
* </pre>
* \defgroup xStreamBufferReceiveFromISR xStreamBufferReceiveFromISR
* \ingroup StreamBufferManagement
*/
size_t xStreamBufferReceiveFromISR( StreamBufferHandle_t xStreamBuffer,
void *pvRxData,
size_t xBufferLengthBytes,
BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
void * pvRxData,
size_t xBufferLengthBytes,
BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
/**
* stream_buffer.h
*
<pre>
void vStreamBufferDelete( StreamBufferHandle_t xStreamBuffer );
</pre>
* <pre>
* void vStreamBufferDelete( StreamBufferHandle_t xStreamBuffer );
* </pre>
*
* Deletes a stream buffer that was previously created using a call to
* xStreamBufferCreate() or xStreamBufferCreateStatic(). If the stream
@@ -615,9 +617,9 @@ void vStreamBufferDelete( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTI
/**
* stream_buffer.h
*
<pre>
BaseType_t xStreamBufferIsFull( StreamBufferHandle_t xStreamBuffer );
</pre>
* <pre>
* BaseType_t xStreamBufferIsFull( StreamBufferHandle_t xStreamBuffer );
* </pre>
*
* Queries a stream buffer to see if it is full. A stream buffer is full if it
* does not have any free space, and therefore cannot accept any more data.
@@ -635,9 +637,9 @@ BaseType_t xStreamBufferIsFull( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_
/**
* stream_buffer.h
*
<pre>
BaseType_t xStreamBufferIsEmpty( StreamBufferHandle_t xStreamBuffer );
</pre>
* <pre>
* BaseType_t xStreamBufferIsEmpty( StreamBufferHandle_t xStreamBuffer );
* </pre>
*
* Queries a stream buffer to see if it is empty. A stream buffer is empty if
* it does not contain any data.
@@ -655,9 +657,9 @@ BaseType_t xStreamBufferIsEmpty( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED
/**
* stream_buffer.h
*
<pre>
BaseType_t xStreamBufferReset( StreamBufferHandle_t xStreamBuffer );
</pre>
* <pre>
* BaseType_t xStreamBufferReset( StreamBufferHandle_t xStreamBuffer );
* </pre>
*
* Resets a stream buffer to its initial, empty, state. Any data that was in
* the stream buffer is discarded. A stream buffer can only be reset if there
@@ -678,9 +680,9 @@ BaseType_t xStreamBufferReset( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_F
/**
* stream_buffer.h
*
<pre>
size_t xStreamBufferSpacesAvailable( StreamBufferHandle_t xStreamBuffer );
</pre>
* <pre>
* size_t xStreamBufferSpacesAvailable( StreamBufferHandle_t xStreamBuffer );
* </pre>
*
* Queries a stream buffer to see how much free space it contains, which is
* equal to the amount of data that can be sent to the stream buffer before it
@@ -699,9 +701,9 @@ size_t xStreamBufferSpacesAvailable( StreamBufferHandle_t xStreamBuffer ) PRIVIL
/**
* stream_buffer.h
*
<pre>
size_t xStreamBufferBytesAvailable( StreamBufferHandle_t xStreamBuffer );
</pre>
* <pre>
* size_t xStreamBufferBytesAvailable( StreamBufferHandle_t xStreamBuffer );
* </pre>
*
* Queries a stream buffer to see how much data it contains, which is equal to
* the number of bytes that can be read from the stream buffer before the stream
@@ -720,9 +722,9 @@ size_t xStreamBufferBytesAvailable( StreamBufferHandle_t xStreamBuffer ) PRIVILE
/**
* stream_buffer.h
*
<pre>
BaseType_t xStreamBufferSetTriggerLevel( StreamBufferHandle_t xStreamBuffer, size_t xTriggerLevel );
</pre>
* <pre>
* BaseType_t xStreamBufferSetTriggerLevel( StreamBufferHandle_t xStreamBuffer, size_t xTriggerLevel );
* </pre>
*
* A stream buffer's trigger level is the number of bytes that must be in the
* stream buffer before a task that is blocked on the stream buffer to
@@ -752,14 +754,15 @@ BaseType_t xStreamBufferSetTriggerLevel( StreamBufferHandle_t xStreamBuffer, siz
* \defgroup xStreamBufferSetTriggerLevel xStreamBufferSetTriggerLevel
* \ingroup StreamBufferManagement
*/
BaseType_t xStreamBufferSetTriggerLevel( StreamBufferHandle_t xStreamBuffer, size_t xTriggerLevel ) PRIVILEGED_FUNCTION;
BaseType_t xStreamBufferSetTriggerLevel( StreamBufferHandle_t xStreamBuffer,
size_t xTriggerLevel ) PRIVILEGED_FUNCTION;
/**
* stream_buffer.h
*
<pre>
BaseType_t xStreamBufferSendCompletedFromISR( StreamBufferHandle_t xStreamBuffer, BaseType_t *pxHigherPriorityTaskWoken );
</pre>
* <pre>
* BaseType_t xStreamBufferSendCompletedFromISR( StreamBufferHandle_t xStreamBuffer, BaseType_t *pxHigherPriorityTaskWoken );
* </pre>
*
* For advanced users only.
*
@@ -791,14 +794,15 @@ BaseType_t xStreamBufferSendCompletedFromISR( StreamBufferHandle_t xStreamBuffer
* \defgroup xStreamBufferSendCompletedFromISR xStreamBufferSendCompletedFromISR
* \ingroup StreamBufferManagement
*/
BaseType_t xStreamBufferSendCompletedFromISR( StreamBufferHandle_t xStreamBuffer, BaseType_t *pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
BaseType_t xStreamBufferSendCompletedFromISR( StreamBufferHandle_t xStreamBuffer,
BaseType_t * pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
/**
* stream_buffer.h
*
<pre>
BaseType_t xStreamBufferReceiveCompletedFromISR( StreamBufferHandle_t xStreamBuffer, BaseType_t *pxHigherPriorityTaskWoken );
</pre>
* <pre>
* BaseType_t xStreamBufferReceiveCompletedFromISR( StreamBufferHandle_t xStreamBuffer, BaseType_t *pxHigherPriorityTaskWoken );
* </pre>
*
* For advanced users only.
*
@@ -831,29 +835,33 @@ BaseType_t xStreamBufferReceiveCompletedFromISR( StreamBufferHandle_t xStreamBuf
* \defgroup xStreamBufferReceiveCompletedFromISR xStreamBufferReceiveCompletedFromISR
* \ingroup StreamBufferManagement
*/
BaseType_t xStreamBufferReceiveCompletedFromISR( StreamBufferHandle_t xStreamBuffer, BaseType_t *pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
BaseType_t xStreamBufferReceiveCompletedFromISR( StreamBufferHandle_t xStreamBuffer,
BaseType_t * pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
/* Functions below here are not part of the public API. */
StreamBufferHandle_t xStreamBufferGenericCreate( size_t xBufferSizeBytes,
size_t xTriggerLevelBytes,
BaseType_t xIsMessageBuffer ) PRIVILEGED_FUNCTION;
size_t xTriggerLevelBytes,
BaseType_t xIsMessageBuffer ) PRIVILEGED_FUNCTION;
StreamBufferHandle_t xStreamBufferGenericCreateStatic( size_t xBufferSizeBytes,
size_t xTriggerLevelBytes,
BaseType_t xIsMessageBuffer,
uint8_t * const pucStreamBufferStorageArea,
StaticStreamBuffer_t * const pxStaticStreamBuffer ) PRIVILEGED_FUNCTION;
size_t xTriggerLevelBytes,
BaseType_t xIsMessageBuffer,
uint8_t * const pucStreamBufferStorageArea,
StaticStreamBuffer_t * const pxStaticStreamBuffer ) PRIVILEGED_FUNCTION;
size_t xStreamBufferNextMessageLengthBytes( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
#if( configUSE_TRACE_FACILITY == 1 )
void vStreamBufferSetStreamBufferNumber( StreamBufferHandle_t xStreamBuffer, UBaseType_t uxStreamBufferNumber ) PRIVILEGED_FUNCTION;
UBaseType_t uxStreamBufferGetStreamBufferNumber( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
uint8_t ucStreamBufferGetStreamBufferType( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
#if ( configUSE_TRACE_FACILITY == 1 )
void vStreamBufferSetStreamBufferNumber( StreamBufferHandle_t xStreamBuffer,
UBaseType_t uxStreamBufferNumber ) PRIVILEGED_FUNCTION;
UBaseType_t uxStreamBufferGetStreamBufferNumber( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
uint8_t ucStreamBufferGetStreamBufferType( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION;
#endif
/* *INDENT-OFF* */
#if defined( __cplusplus )
}
}
#endif
/* *INDENT-ON* */
#endif /* !defined( STREAM_BUFFER_H ) */
#endif /* !defined( STREAM_BUFFER_H ) */

5580
source/Middlewares/Third_Party/FreeRTOS/Source/include/task.h vendored
View File

File diff suppressed because it is too large Load Diff

2660
source/Middlewares/Third_Party/FreeRTOS/Source/include/timers.h vendored
View File

File diff suppressed because it is too large Load Diff

258
source/Middlewares/Third_Party/FreeRTOS/Source/list.c vendored
View File

@@ -1,5 +1,5 @@
/*
* FreeRTOS Kernel V10.3.1
* FreeRTOS Kernel V10.4.1
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
@@ -19,180 +19,192 @@
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
* 1 tab == 4 spaces!
*/
#include <stdlib.h>
/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
* all the API functions to use the MPU wrappers. That should only be done when
* task.h is included from an application file. */
#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
#include "FreeRTOS.h"
#include "list.h"
/* Lint e9021, e961 and e750 are suppressed as a MISRA exception justified
* because the MPU ports require MPU_WRAPPERS_INCLUDED_FROM_API_FILE to be
* defined for the header files above, but not in this file, in order to
* generate the correct privileged Vs unprivileged linkage and placement. */
#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE /*lint !e961 !e750 !e9021. */
/*-----------------------------------------------------------
* PUBLIC LIST API documented in list.h
*----------------------------------------------------------*/
* PUBLIC LIST API documented in list.h
*----------------------------------------------------------*/
void vListInitialise( List_t * const pxList )
{
/* The list structure contains a list item which is used to mark the
end of the list. To initialise the list the list end is inserted
as the only list entry. */
pxList->pxIndex = ( ListItem_t * ) &( pxList->xListEnd ); /*lint !e826 !e740 !e9087 The mini list structure is used as the list end to save RAM. This is checked and valid. */
/* The list structure contains a list item which is used to mark the
* end of the list. To initialise the list the list end is inserted
* as the only list entry. */
pxList->pxIndex = ( ListItem_t * ) &( pxList->xListEnd ); /*lint !e826 !e740 !e9087 The mini list structure is used as the list end to save RAM. This is checked and valid. */
/* The list end value is the highest possible value in the list to
ensure it remains at the end of the list. */
pxList->xListEnd.xItemValue = portMAX_DELAY;
/* The list end value is the highest possible value in the list to
* ensure it remains at the end of the list. */
pxList->xListEnd.xItemValue = portMAX_DELAY;
/* The list end next and previous pointers point to itself so we know
when the list is empty. */
pxList->xListEnd.pxNext = ( ListItem_t * ) &( pxList->xListEnd ); /*lint !e826 !e740 !e9087 The mini list structure is used as the list end to save RAM. This is checked and valid. */
pxList->xListEnd.pxPrevious = ( ListItem_t * ) &( pxList->xListEnd );/*lint !e826 !e740 !e9087 The mini list structure is used as the list end to save RAM. This is checked and valid. */
/* The list end next and previous pointers point to itself so we know
* when the list is empty. */
pxList->xListEnd.pxNext = ( ListItem_t * ) &( pxList->xListEnd ); /*lint !e826 !e740 !e9087 The mini list structure is used as the list end to save RAM. This is checked and valid. */
pxList->xListEnd.pxPrevious = ( ListItem_t * ) &( pxList->xListEnd ); /*lint !e826 !e740 !e9087 The mini list structure is used as the list end to save RAM. This is checked and valid. */
pxList->uxNumberOfItems = ( UBaseType_t ) 0U;
pxList->uxNumberOfItems = ( UBaseType_t ) 0U;
/* Write known values into the list if
configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
listSET_LIST_INTEGRITY_CHECK_1_VALUE( pxList );
listSET_LIST_INTEGRITY_CHECK_2_VALUE( pxList );
/* Write known values into the list if
* configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
listSET_LIST_INTEGRITY_CHECK_1_VALUE( pxList );
listSET_LIST_INTEGRITY_CHECK_2_VALUE( pxList );
}
/*-----------------------------------------------------------*/
void vListInitialiseItem( ListItem_t * const pxItem )
{
/* Make sure the list item is not recorded as being on a list. */
pxItem->pxContainer = NULL;
/* Make sure the list item is not recorded as being on a list. */
pxItem->pxContainer = NULL;
/* Write known values into the list item if
configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
listSET_FIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem );
listSET_SECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem );
/* Write known values into the list item if
* configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
listSET_FIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem );
listSET_SECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem );
}
/*-----------------------------------------------------------*/
void vListInsertEnd( List_t * const pxList, ListItem_t * const pxNewListItem )
void vListInsertEnd( List_t * const pxList,
ListItem_t * const pxNewListItem )
{
ListItem_t * const pxIndex = pxList->pxIndex;
ListItem_t * const pxIndex = pxList->pxIndex;
/* Only effective when configASSERT() is also defined, these tests may catch
the list data structures being overwritten in memory. They will not catch
data errors caused by incorrect configuration or use of FreeRTOS. */
listTEST_LIST_INTEGRITY( pxList );
listTEST_LIST_ITEM_INTEGRITY( pxNewListItem );
/* Only effective when configASSERT() is also defined, these tests may catch
* the list data structures being overwritten in memory. They will not catch
* data errors caused by incorrect configuration or use of FreeRTOS. */
listTEST_LIST_INTEGRITY( pxList );
listTEST_LIST_ITEM_INTEGRITY( pxNewListItem );
/* Insert a new list item into pxList, but rather than sort the list,
makes the new list item the last item to be removed by a call to
listGET_OWNER_OF_NEXT_ENTRY(). */
pxNewListItem->pxNext = pxIndex;
pxNewListItem->pxPrevious = pxIndex->pxPrevious;
/* Insert a new list item into pxList, but rather than sort the list,
* makes the new list item the last item to be removed by a call to
* listGET_OWNER_OF_NEXT_ENTRY(). */
pxNewListItem->pxNext = pxIndex;
pxNewListItem->pxPrevious = pxIndex->pxPrevious;
/* Only used during decision coverage testing. */
mtCOVERAGE_TEST_DELAY();
/* Only used during decision coverage testing. */
mtCOVERAGE_TEST_DELAY();
pxIndex->pxPrevious->pxNext = pxNewListItem;
pxIndex->pxPrevious = pxNewListItem;
pxIndex->pxPrevious->pxNext = pxNewListItem;
pxIndex->pxPrevious = pxNewListItem;
/* Remember which list the item is in. */
pxNewListItem->pxContainer = pxList;
/* Remember which list the item is in. */
pxNewListItem->pxContainer = pxList;
( pxList->uxNumberOfItems )++;
( pxList->uxNumberOfItems )++;
}
/*-----------------------------------------------------------*/
void vListInsert( List_t * const pxList, ListItem_t * const pxNewListItem )
void vListInsert( List_t * const pxList,
ListItem_t * const pxNewListItem )
{
ListItem_t *pxIterator;
const TickType_t xValueOfInsertion = pxNewListItem->xItemValue;
ListItem_t * pxIterator;
const TickType_t xValueOfInsertion = pxNewListItem->xItemValue;
/* Only effective when configASSERT() is also defined, these tests may catch
the list data structures being overwritten in memory. They will not catch
data errors caused by incorrect configuration or use of FreeRTOS. */
listTEST_LIST_INTEGRITY( pxList );
listTEST_LIST_ITEM_INTEGRITY( pxNewListItem );
/* Only effective when configASSERT() is also defined, these tests may catch
* the list data structures being overwritten in memory. They will not catch
* data errors caused by incorrect configuration or use of FreeRTOS. */
listTEST_LIST_INTEGRITY( pxList );
listTEST_LIST_ITEM_INTEGRITY( pxNewListItem );
/* Insert the new list item into the list, sorted in xItemValue order.
/* Insert the new list item into the list, sorted in xItemValue order.
*
* If the list already contains a list item with the same item value then the
* new list item should be placed after it. This ensures that TCBs which are
* stored in ready lists (all of which have the same xItemValue value) get a
* share of the CPU. However, if the xItemValue is the same as the back marker
* the iteration loop below will not end. Therefore the value is checked
* first, and the algorithm slightly modified if necessary. */
if( xValueOfInsertion == portMAX_DELAY )
{
pxIterator = pxList->xListEnd.pxPrevious;
}
else
{
/* *** NOTE ***********************************************************
* If you find your application is crashing here then likely causes are
* listed below. In addition see https://www.FreeRTOS.org/FAQHelp.html for
* more tips, and ensure configASSERT() is defined!
* https://www.FreeRTOS.org/a00110.html#configASSERT
*
* 1) Stack overflow -
* see https://www.FreeRTOS.org/Stacks-and-stack-overflow-checking.html
* 2) Incorrect interrupt priority assignment, especially on Cortex-M
* parts where numerically high priority values denote low actual
* interrupt priorities, which can seem counter intuitive. See
* https://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html and the definition
* of configMAX_SYSCALL_INTERRUPT_PRIORITY on
* https://www.FreeRTOS.org/a00110.html
* 3) Calling an API function from within a critical section or when
* the scheduler is suspended, or calling an API function that does
* not end in "FromISR" from an interrupt.
* 4) Using a queue or semaphore before it has been initialised or
* before the scheduler has been started (are interrupts firing
* before vTaskStartScheduler() has been called?).
**********************************************************************/
If the list already contains a list item with the same item value then the
new list item should be placed after it. This ensures that TCBs which are
stored in ready lists (all of which have the same xItemValue value) get a
share of the CPU. However, if the xItemValue is the same as the back marker
the iteration loop below will not end. Therefore the value is checked
first, and the algorithm slightly modified if necessary. */
if( xValueOfInsertion == portMAX_DELAY )
{
pxIterator = pxList->xListEnd.pxPrevious;
}
else
{
/* *** NOTE ***********************************************************
If you find your application is crashing here then likely causes are
listed below. In addition see https://www.freertos.org/FAQHelp.html for
more tips, and ensure configASSERT() is defined!
https://www.freertos.org/a00110.html#configASSERT
for( pxIterator = ( ListItem_t * ) &( pxList->xListEnd ); pxIterator->pxNext->xItemValue <= xValueOfInsertion; pxIterator = pxIterator->pxNext ) /*lint !e826 !e740 !e9087 The mini list structure is used as the list end to save RAM. This is checked and valid. *//*lint !e440 The iterator moves to a different value, not xValueOfInsertion. */
{
/* There is nothing to do here, just iterating to the wanted
* insertion position. */
}
}
1) Stack overflow -
see https://www.freertos.org/Stacks-and-stack-overflow-checking.html
2) Incorrect interrupt priority assignment, especially on Cortex-M
parts where numerically high priority values denote low actual
interrupt priorities, which can seem counter intuitive. See
https://www.freertos.org/RTOS-Cortex-M3-M4.html and the definition
of configMAX_SYSCALL_INTERRUPT_PRIORITY on
https://www.freertos.org/a00110.html
3) Calling an API function from within a critical section or when
the scheduler is suspended, or calling an API function that does
not end in "FromISR" from an interrupt.
4) Using a queue or semaphore before it has been initialised or
before the scheduler has been started (are interrupts firing
before vTaskStartScheduler() has been called?).
**********************************************************************/
pxNewListItem->pxNext = pxIterator->pxNext;
pxNewListItem->pxNext->pxPrevious = pxNewListItem;
pxNewListItem->pxPrevious = pxIterator;
pxIterator->pxNext = pxNewListItem;
for( pxIterator = ( ListItem_t * ) &( pxList->xListEnd ); pxIterator->pxNext->xItemValue <= xValueOfInsertion; pxIterator = pxIterator->pxNext ) /*lint !e826 !e740 !e9087 The mini list structure is used as the list end to save RAM. This is checked and valid. *//*lint !e440 The iterator moves to a different value, not xValueOfInsertion. */
{
/* There is nothing to do here, just iterating to the wanted
insertion position. */
}
}
/* Remember which list the item is in. This allows fast removal of the
* item later. */
pxNewListItem->pxContainer = pxList;
pxNewListItem->pxNext = pxIterator->pxNext;
pxNewListItem->pxNext->pxPrevious = pxNewListItem;
pxNewListItem->pxPrevious = pxIterator;
pxIterator->pxNext = pxNewListItem;
/* Remember which list the item is in. This allows fast removal of the
item later. */
pxNewListItem->pxContainer = pxList;
( pxList->uxNumberOfItems )++;
( pxList->uxNumberOfItems )++;
}
/*-----------------------------------------------------------*/
UBaseType_t uxListRemove( ListItem_t * const pxItemToRemove )
{
/* The list item knows which list it is in. Obtain the list from the list
item. */
List_t * const pxList = pxItemToRemove->pxContainer;
* item. */
List_t * const pxList = pxItemToRemove->pxContainer;
pxItemToRemove->pxNext->pxPrevious = pxItemToRemove->pxPrevious;
pxItemToRemove->pxPrevious->pxNext = pxItemToRemove->pxNext;
pxItemToRemove->pxNext->pxPrevious = pxItemToRemove->pxPrevious;
pxItemToRemove->pxPrevious->pxNext = pxItemToRemove->pxNext;
/* Only used during decision coverage testing. */
mtCOVERAGE_TEST_DELAY();
/* Only used during decision coverage testing. */
mtCOVERAGE_TEST_DELAY();
/* Make sure the index is left pointing to a valid item. */
if( pxList->pxIndex == pxItemToRemove )
{
pxList->pxIndex = pxItemToRemove->pxPrevious;
}
else
{
mtCOVERAGE_TEST_MARKER();
}
/* Make sure the index is left pointing to a valid item. */
if( pxList->pxIndex == pxItemToRemove )
{
pxList->pxIndex = pxItemToRemove->pxPrevious;
}
else
{
mtCOVERAGE_TEST_MARKER();
}
pxItemToRemove->pxContainer = NULL;
( pxList->uxNumberOfItems )--;
pxItemToRemove->pxContainer = NULL;
( pxList->uxNumberOfItems )--;
return pxList->uxNumberOfItems;
return pxList->uxNumberOfItems;
}
/*-----------------------------------------------------------*/

4936
source/Middlewares/Third_Party/FreeRTOS/Source/queue.c vendored
View File

File diff suppressed because it is too large Load Diff

1326
source/Middlewares/Third_Party/FreeRTOS/Source/stream_buffer.c vendored Normal file
View File

File diff suppressed because it is too large Load Diff

8230
source/Middlewares/Third_Party/FreeRTOS/Source/tasks.c vendored
View File

File diff suppressed because it is too large Load Diff

1713
source/Middlewares/Third_Party/FreeRTOS/Source/timers.c vendored
View File

File diff suppressed because it is too large Load Diff