sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity

Fomatting and adjust setpoint

Browse Source
This commit is contained in:
Ben V. Brown
2024-12-07 13:11:12 +11:00
committed by Ben V. Brown
parent 6cc8b8184e
commit d313f62101
6 changed files with 11 additions and 11 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
source/Core/BSP/MHP30/configuration.h
View File

@@ -103,8 +103,8 @@
#define DETAILED_IDLE 0 // 0: Disable 1: Enable - Default 0
// Due to large thermal mass of the PCB being heated we need to pull this back a bit
#define THERMAL_RUNAWAY_TIME_SEC 45
#define THERMAL_RUNAWAY_TEMP_C 3
#define THERMAL_RUNAWAY_TIME_SEC 20
#define THERMAL_RUNAWAY_TEMP_C 2
#define CUT_OUT_SETTING 0 // default to no cut-off voltage
#define RECOM_VOL_CELL 33 // Minimum voltage per cell (Recommended 3.3V (33))

2
source/Core/BSP/Miniware/configuration.h
View File

@@ -109,7 +109,7 @@
#define DETAILED_IDLE 0 // 0: Disable 1: Enable - Default 0
#define THERMAL_RUNAWAY_TIME_SEC 20
#define THERMAL_RUNAWAY_TEMP_C 10
#define THERMAL_RUNAWAY_TEMP_C 3
#define CUT_OUT_SETTING 0 // default to no cut-off voltage
#define RECOM_VOL_CELL 33 // Minimum voltage per cell (Recommended 3.3V (33))

2
source/Core/BSP/Pinecil/configuration.h
View File

@@ -104,7 +104,7 @@
#define DETAILED_IDLE 0 // 0: Disable 1: Enable - Default 0
#define THERMAL_RUNAWAY_TIME_SEC 20
#define THERMAL_RUNAWAY_TEMP_C 20
#define THERMAL_RUNAWAY_TEMP_C 3
#define CUT_OUT_SETTING 0 // default to no cut-off voltage
#define RECOM_VOL_CELL 33 // Minimum voltage per cell (Recommended 3.3V (33))

2
source/Core/BSP/Pinecilv2/configuration.h
View File

@@ -105,7 +105,7 @@
#define DETAILED_IDLE 0 // 0: Disable 1: Enable - Default 0
#define THERMAL_RUNAWAY_TIME_SEC 20
#define THERMAL_RUNAWAY_TEMP_C 20
#define THERMAL_RUNAWAY_TEMP_C 3
#define CUT_OUT_SETTING 0 // default to no cut-off voltage
#define RECOM_VOL_CELL 33 // Minimum voltage per cell (Recommended 3.3V (33))

8
source/Core/BSP/Sequre/configuration.h
View File

@@ -133,7 +133,7 @@
#define TEMP_uV_LOOKUP_S60
#define USB_PD_VMAX 12 // Maximum voltage for PD to negotiate
#define THERMAL_RUNAWAY_TIME_SEC 20
#define THERMAL_RUNAWAY_TEMP_C 10
#define THERMAL_RUNAWAY_TEMP_C 3
#define HARDWARE_MAX_WATTAGE_X10 600
@@ -167,7 +167,7 @@
#define TEMP_uV_LOOKUP_S60
#define USB_PD_VMAX 20 // Maximum voltage for PD to negotiate
#define THERMAL_RUNAWAY_TIME_SEC 20
#define THERMAL_RUNAWAY_TEMP_C 10
#define THERMAL_RUNAWAY_TEMP_C 3
#define HARDWARE_MAX_WATTAGE_X10 600
@@ -218,8 +218,8 @@
#define TIP_THERMAL_MASS 30 // X10 watts to raise 1 deg C in 1 second
#define TIP_THERMAL_INERTIA 10 // We use a large inertia value to smooth out the drive to the tip since its stupidly sensitive
#define THERMAL_RUNAWAY_TIME_SEC 60
#define THERMAL_RUNAWAY_TEMP_C 3
#define THERMAL_RUNAWAY_TIME_SEC 30
#define THERMAL_RUNAWAY_TEMP_C 2
#define COPPER_HEATER_COIL 1 // Have a heater coil that changes resistance on us
#define TIP_RESISTANCE 52 // PCB heater, measured at ~19C. Will shift by temp a decent amount