sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity

Calibrate CJC at next boot (#1398)

Browse Source 
Changes Cold Junction Compensation (Tip Offset / CJC) to be performed during bootup time. (After starting in settings)
This commit is contained in:
discip
2022-09-10 12:52:57 +02:00
committed by GitHub
parent 19a6e169a7
commit c89db78b45
45 changed files with 572 additions and 557 deletions
Download Patch File Download Diff File Expand all files Collapse all files

25
Translations/make_translation.py
View File

@@ -120,20 +120,21 @@ def get_debug_menu() -> List[str]:
return [
datetime.today().strftime("%d-%m-%y"),
"ID ",
"ACC ",
"PWR ",
"Vin ",
"Tip C ",
"Han C ",
"Max C ",
"UpTime ",
"Move ",
"ACC ",
"Move ",
"Tip Res",
"RTip ",
"CTip ",
"CHan ",
"CMax ",
"Vin ",
"PWR ",
"HW G ",
"HW M ",
"HW P ",
"Hall ",
"Tip R ",
"Tip O ",
"HW G ",
"HW M ",
"HW P ",
"Hall ",
]

2
Translations/translation_BE.json
View File

@@ -176,7 +176,7 @@
],
"desc": "Міргаць тэмпературай на экране астуджэння, пакуль джала яшчэ гарачае"
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Каліброўка",
"тэмпературы"

2
Translations/translation_BG.json
View File

@@ -175,7 +175,7 @@
],
"desc": "След изключване от работен режим, индикатора за температура да мига докато човката на поялника все още е топла"
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Калибриране",
"температура?"

2
Translations/translation_CS.json
View File

@@ -175,7 +175,7 @@
],
"desc": "Blikat teplotou při chladnutí dokud je hrot horký"
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Kalibrovat",
"teplotu?"

2
Translations/translation_DA.json
View File

@@ -175,7 +175,7 @@
],
"desc": "Blink temperaturen på skærmen, mens spidsen stadig er varm."
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Calibrate",
"temperature?"

6
Translations/translation_DE.json
View File

@@ -7,7 +7,7 @@
],
"tempUnitFahrenheit": false,
"messages": {
"SettingsCalibrationWarning": "Nur Fortfahren wenn Lötspitze & Gerät Raumtemperatur haben!",
"SettingsCalibrationWarning": "Nur Kalibrieren wenn Lötspitze & Gerät Raumtemperatur haben!",
"SettingsResetWarning": "Sicher, dass alle Werte zurückgesetzt werden sollen?",
"UVLOWarningString": "V niedr.",
"UndervoltageString": "Unterspannung",
@@ -175,12 +175,12 @@
],
"desc": "Temperaturanzeige blinkt beim Abkühlen, solange Spitze heiß ist"
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Temperatur",
"kalibrieren?"
],
"desc": "Kalibrierung der Kaltstellenkompensation (nicht nötig wenn Delta T < 5°C)"
"desc": "Kalibrierung der Kaltstellenkompensation beim nächsten Start (nicht nötig wenn Delta T < 5°C)"
},
"SettingsReset": {
"text2": [

2
Translations/translation_EL.json
View File

@@ -178,7 +178,7 @@
],
"desc": "Αναβοσβήσιμο της ενδειξης θερμοκρασίας κατά την παύση θέρμανσης όταν η μύτη είναι ακόμα καυτή"
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Βαθμονόμηση",
"θερμοκρασίας;"

680
Translations/translation_EN.json
View File

@@ -1,340 +1,340 @@
{
"languageCode": "EN",
"languageLocalName": "English",
"fonts": [
"ascii_basic",
"latin_extended"
],
"tempUnitFahrenheit": true,
"messages": {
"SettingsCalibrationWarning": "Confirm the tip & device are at room temperature before starting!",
"SettingsResetWarning": "Are you sure you want to restore default settings?",
"UVLOWarningString": "DC LOW",
"UndervoltageString": "Undervoltage",
"InputVoltageString": "Input V: ",
"SleepingSimpleString": "Zzzz",
"SleepingAdvancedString": "Sleeping...",
"SleepingTipAdvancedString": "Tip:",
"OffString": "Off",
"DeviceFailedValidationWarning": "Your device is likely a Counterfeit!"
},
"messagesWarn": {
"ResetOKMessage": "Reset OK",
"SettingsResetMessage": [
"Certain settings",
"were changed!"
],
"NoAccelerometerMessage": [
"No accelerometer",
"detected!"
],
"NoPowerDeliveryMessage": [
"No USB-PD IC",
"detected!"
],
"LockingKeysString": "LOCKED",
"UnlockingKeysString": "UNLOCKED",
"WarningKeysLockedString": "!LOCKED!",
"WarningThermalRunaway": [
"Thermal",
"Runaway"
]
},
"characters": {
"SettingRightChar": "R",
"SettingLeftChar": "L",
"SettingAutoChar": "A",
"SettingOffChar": "O",
"SettingSlowChar": "S",
"SettingMediumChar": "M",
"SettingFastChar": "F",
"SettingStartNoneChar": "O",
"SettingStartSolderingChar": "S",
"SettingStartSleepChar": "Z",
"SettingStartSleepOffChar": "R",
"SettingSensitivityOff": "O",
"SettingSensitivityLow": "L",
"SettingSensitivityMedium": "M",
"SettingSensitivityHigh": "H",
"SettingLockDisableChar": "D",
"SettingLockBoostChar": "B",
"SettingLockFullChar": "F"
},
"menuGroups": {
"PowerMenu": {
"text2": [
"Power",
"settings"
],
"desc": "Power settings"
},
"SolderingMenu": {
"text2": [
"Soldering",
"settings"
],
"desc": "Soldering settings"
},
"PowerSavingMenu": {
"text2": [
"Sleep",
"mode"
],
"desc": "Power saving settings"
},
"UIMenu": {
"text2": [
"User",
"interface"
],
"desc": "User interface settings"
},
"AdvancedMenu": {
"text2": [
"Advanced",
"settings"
],
"desc": "Advanced settings"
}
},
"menuOptions": {
"DCInCutoff": {
"text2": [
"Power",
"source"
],
"desc": "Set cutoff voltage to prevent battery over-drain. (DC 10V) (S=3.3V per cell, disable PWR limit)"
},
"SleepTemperature": {
"text2": [
"Sleep",
"temp"
],
"desc": "Tip temperature while in \"sleep mode\""
},
"SleepTimeout": {
"text2": [
"Sleep",
"timeout"
],
"desc": "Interval before \"sleep mode\" starts (s=seconds | m=minutes)"
},
"ShutdownTimeout": {
"text2": [
"Shutdown",
"timeout"
],
"desc": "Interval before the iron shuts down (m=minutes)"
},
"MotionSensitivity": {
"text2": [
"Motion",
"sensitivity"
],
"desc": "0=off | 1=least sensitive | ... | 9=most sensitive"
},
"TemperatureUnit": {
"text2": [
"Temperature",
"unit"
],
"desc": "C=Celsius | F=Fahrenheit"
},
"AdvancedIdle": {
"text2": [
"Detailed",
"idle screen"
],
"desc": "Display detailed info in a smaller font on idle screen"
},
"DisplayRotation": {
"text2": [
"Display",
"orientation"
],
"desc": "R=right-handed | L=left-handed | A=automatic"
},
"BoostTemperature": {
"text2": [
"Boost",
"temp"
],
"desc": "Tip temperature used in \"boost mode\""
},
"AutoStart": {
"text2": [
"Start-up",
"behavior"
],
"desc": "O=off | S=heat to soldering temp | Z=standby at sleep temp until moved | R=standby, heat-off until moved"
},
"CooldownBlink": {
"text2": [
"Cooldown",
"flashing"
],
"desc": "Flash temperature reading at idle if tip is hot"
},
"TemperatureCalibration": {
"text2": [
"Calibrate",
"tip CJC"
],
"desc": "Tip-temperature Cold Junction Compensation (not needed if Tip is +/- 5°C of display)"
},
"SettingsReset": {
"text2": [
"Restore default",
"settings"
],
"desc": "Reset default settings for this firmware ver."
},
"VoltageCalibration": {
"text2": [
"Calibrate",
"input voltage"
],
"desc": "Start VIN calibration (long press to exit)"
},
"AdvancedSoldering": {
"text2": [
"Detailed",
"solder screen"
],
"desc": "Display detailed info in a smaller font on soldering screen"
},
"ScrollingSpeed": {
"text2": [
"Scrolling",
"speed"
],
"desc": "Speed info text scrolls past at (S=slow | F=fast)"
},
"QCMaxVoltage": {
"text2": [
"QC",
"voltage"
],
"desc": "Max QC voltage the iron should negotiate for"
},
"PDNegTimeout": {
"text2": [
"PD",
"timeout"
],
"desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
},
"PowerLimit": {
"text2": [
"Power",
"limit"
],
"desc": "Maximum power the iron can use (W=watt)"
},
"ReverseButtonTempChange": {
"text2": [
"Swap",
"+ - keys"
],
"desc": "Reverse assignment of buttons for temperature adjustment"
},
"TempChangeShortStep": {
"text2": [
"Temp change",
"short"
],
"desc": "Temperature-change-increment on short button press"
},
"TempChangeLongStep": {
"text2": [
"Temp change",
"long"
],
"desc": "Temperature-change-increment on long button press"
},
"PowerPulsePower": {
"text2": [
"Power",
"pulse"
],
"desc": "Intensity of power of keep-awake-pulse (watt)"
},
"HallEffSensitivity": {
"text2": [
"Hall sensor",
"sensitivity"
],
"desc": "Sensitivity to magnets (0=off | 1=least sensitive | ... | 9=most sensitive)"
},
"LockingMode": {
"text2": [
"Allow locking",
"buttons"
],
"desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
},
"MinVolCell": {
"text2": [
"Minimum",
"voltage"
],
"desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
},
"AnimLoop": {
"text2": [
"Anim.",
"loop"
],
"desc": "Loop icon animations in main menu"
},
"AnimSpeed": {
"text2": [
"Anim.",
"speed"
],
"desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
},
"PowerPulseWait": {
"text2": [
"Power pulse",
"delay"
],
"desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
},
"PowerPulseDuration": {
"text2": [
"Power pulse",
"duration"
],
"desc": "Keep-awake-pulse duration (x 250ms)"
},
"LanguageSwitch": {
"text2": [
"Language:",
" EN English"
],
"desc": "Current firmware language"
},
"Brightness": {
"text2": [
"Screen",
"brightness"
],
"desc": "Adjust the OLED screen brightness"
},
"ColourInversion": {
"text2": [
"Invert",
"screen"
],
"desc": "Invert the OLED screen colors"
},
"LOGOTime": {
"text2": [
"Boot logo",
"duration"
],
"desc": "Set Boot logo duration (off | s=seconds | infinity)"
}
}
}
{
"languageCode": "EN",
"languageLocalName": "English",
"fonts": [
"ascii_basic",
"latin_extended"
],
"tempUnitFahrenheit": true,
"messages": {
"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature before calibration!",
"SettingsResetWarning": "Are you sure you want to restore default settings?",
"UVLOWarningString": "DC LOW",
"UndervoltageString": "Undervoltage",
"InputVoltageString": "Input V: ",
"SleepingSimpleString": "Zzzz",
"SleepingAdvancedString": "Sleeping...",
"SleepingTipAdvancedString": "Tip:",
"OffString": "Off",
"DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"
},
"messagesWarn": {
"ResetOKMessage": "Reset OK",
"SettingsResetMessage": [
"Certain settings",
"were changed!"
],
"NoAccelerometerMessage": [
"No accelerometer",
"detected!"
],
"NoPowerDeliveryMessage": [
"No USB-PD IC",
"detected!"
],
"LockingKeysString": "LOCKED",
"UnlockingKeysString": "UNLOCKED",
"WarningKeysLockedString": "!LOCKED!",
"WarningThermalRunaway": [
"Thermal",
"Runaway"
]
},
"characters": {
"SettingRightChar": "R",
"SettingLeftChar": "L",
"SettingAutoChar": "A",
"SettingOffChar": "O",
"SettingSlowChar": "S",
"SettingMediumChar": "M",
"SettingFastChar": "F",
"SettingStartNoneChar": "O",
"SettingStartSolderingChar": "S",
"SettingStartSleepChar": "Z",
"SettingStartSleepOffChar": "R",
"SettingSensitivityOff": "O",
"SettingSensitivityLow": "L",
"SettingSensitivityMedium": "M",
"SettingSensitivityHigh": "H",
"SettingLockDisableChar": "D",
"SettingLockBoostChar": "B",
"SettingLockFullChar": "F"
},
"menuGroups": {
"PowerMenu": {
"text2": [
"Power",
"settings"
],
"desc": "Power settings"
},
"SolderingMenu": {
"text2": [
"Soldering",
"settings"
],
"desc": "Soldering settings"
},
"PowerSavingMenu": {
"text2": [
"Sleep",
"mode"
],
"desc": "Power saving settings"
},
"UIMenu": {
"text2": [
"User",
"interface"
],
"desc": "User interface settings"
},
"AdvancedMenu": {
"text2": [
"Advanced",
"settings"
],
"desc": "Advanced settings"
}
},
"menuOptions": {
"DCInCutoff": {
"text2": [
"Power",
"source"
],
"desc": "Set cutoff voltage to prevent battery overdrainage (DC 10V) (S=3.3V per cell, disable PWR limit)"
},
"SleepTemperature": {
"text2": [
"Sleep",
"temp"
],
"desc": "Tip temperature while in \"sleep mode\""
},
"SleepTimeout": {
"text2": [
"Sleep",
"timeout"
],
"desc": "Interval before \"sleep mode\" starts (s=seconds | m=minutes)"
},
"ShutdownTimeout": {
"text2": [
"Shutdown",
"timeout"
],
"desc": "Interval before the iron shuts down (m=minutes)"
},
"MotionSensitivity": {
"text2": [
"Motion",
"sensitivity"
],
"desc": "0=off | 1=least sensitive | ... | 9=most sensitive"
},
"TemperatureUnit": {
"text2": [
"Temperature",
"unit"
],
"desc": "C=°Celsius | F=°Fahrenheit"
},
"AdvancedIdle": {
"text2": [
"Detailed",
"idle screen"
],
"desc": "Display detailed info in a smaller font on idle screen"
},
"DisplayRotation": {
"text2": [
"Display",
"orientation"
],
"desc": "R=right-handed | L=left-handed | A=automatic"
},
"BoostTemperature": {
"text2": [
"Boost",
"temp"
],
"desc": "Tip temperature used in \"boost mode\""
},
"AutoStart": {
"text2": [
"Start-up",
"behavior"
],
"desc": "O=off | S=heat to soldering temp | Z=standby at sleep temp until moved | R=standby without heating until moved"
},
"CooldownBlink": {
"text2": [
"Cooldown",
"flashing"
],
"desc": "Flash temp reading at idle while tip is hot"
},
"CalibrateCJC": {
"text2": [
"Calibrate CJC",
"at next boot"
],
"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
"SettingsReset": {
"text2": [
"Restore default",
"settings"
],
"desc": "Reset all settings to default"
},
"VoltageCalibration": {
"text2": [
"Calibrate",
"input voltage"
],
"desc": "Start VIN calibration (long press to exit)"
},
"AdvancedSoldering": {
"text2": [
"Detailed",
"solder screen"
],
"desc": "Display detailed info in a smaller font on soldering screen"
},
"ScrollingSpeed": {
"text2": [
"Scrolling",
"speed"
],
"desc": "Speed info text scrolls past at (S=slow | F=fast)"
},
"QCMaxVoltage": {
"text2": [
"QC",
"voltage"
],
"desc": "Max QC voltage the iron should negotiate for"
},
"PDNegTimeout": {
"text2": [
"PD",
"timeout"
],
"desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
},
"PowerLimit": {
"text2": [
"Power",
"limit"
],
"desc": "Maximum power the iron can use (W=watt)"
},
"ReverseButtonTempChange": {
"text2": [
"Swap",
"+ - keys"
],
"desc": "Reverse assignment of buttons for temperature adjustment"
},
"TempChangeShortStep": {
"text2": [
"Temp change",
"short"
],
"desc": "Temperature-change-increment on short button press"
},
"TempChangeLongStep": {
"text2": [
"Temp change",
"long"
],
"desc": "Temperature-change-increment on long button press"
},
"PowerPulsePower": {
"text2": [
"Power",
"pulse"
],
"desc": "Intensity of power of keep-awake-pulse (watt)"
},
"HallEffSensitivity": {
"text2": [
"Hall sensor",
"sensitivity"
],
"desc": "Sensitivity to magnets (0=off | 1=least sensitive | ... | 9=most sensitive)"
},
"LockingMode": {
"text2": [
"Allow locking",
"buttons"
],
"desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
},
"MinVolCell": {
"text2": [
"Minimum",
"voltage"
],
"desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
},
"AnimLoop": {
"text2": [
"Anim.",
"loop"
],
"desc": "Loop icon animations in main menu"
},
"AnimSpeed": {
"text2": [
"Anim.",
"speed"
],
"desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
},
"PowerPulseWait": {
"text2": [
"Power pulse",
"delay"
],
"desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
},
"PowerPulseDuration": {
"text2": [
"Power pulse",
"duration"
],
"desc": "Keep-awake-pulse duration (x 250ms)"
},
"LanguageSwitch": {
"text2": [
"Language:",
" EN English"
],
"desc": "Current firmware language"
},
"Brightness": {
"text2": [
"Screen",
"brightness"
],
"desc": "Adjust the OLED screen brightness"
},
"ColourInversion": {
"text2": [
"Invert",
"screen"
],
"desc": "Invert the OLED screen colors"
},
"LOGOTime": {
"text2": [
"Boot logo",
"duration"
],
"desc": "Set boot logo duration (off | s=seconds | infinity)"
}
}
}

2
Translations/translation_ES.json
View File

@@ -175,7 +175,7 @@
],
"desc": "La temperatura en pantalla parpadea mientras la punta siga caliente."
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Calibrar temp.",
"de la punta"

2
Translations/translation_FI.json
View File

@@ -175,7 +175,7 @@
],
"desc": "Vilkuttaa jäähtyessä juotoskärjen lämpötilaa sen ollessa vielä vaarallisen kuuma"
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Kalibroi",
"lämpötila?"

2
Translations/translation_FR.json
View File

@@ -175,7 +175,7 @@
],
"desc": "Faire clignoter la température lors du refroidissement tant que la panne est chaude"
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Étalonner",
"température"

2
Translations/translation_HR.json
View File

@@ -175,7 +175,7 @@
],
"desc": "Bljeskanje temperature prilikom hlađenja, ako je lemilica vruća."
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Kalibracija",
"temperature"

2
Translations/translation_HU.json
View File

@@ -175,7 +175,7 @@
],
"desc": "Villogjon a hőmérséklet kijelzése hűlés közben, amíg a forrasztó hegy forró"
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Hőmérséklet",
"kalibrálása?"

2
Translations/translation_IT.json
View File

@@ -174,7 +174,7 @@
"punta calda"],
"desc": "Evidenzia il valore di temperatura durante il raffreddamento se la punta è ancora calda"
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Calibrazione",
"temperatura"

2
Translations/translation_JA_JP.json
View File

@@ -115,7 +115,7 @@
"text2": "冷却中に点滅",
"desc": "加熱の停止後、コテ先が熱い間は温度表示を点滅する"
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": "温度校正",
"desc": "コテ先の温度校正を開始する"
},

2
Translations/translation_LT.json
View File

@@ -175,7 +175,7 @@
],
"desc": "Ar mirksėti temperatūrą ekrane kol vėstantis antgalis vis dar karštas?"
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Kalibruoti",
"temperatūrą?"

2
Translations/translation_NL.json
View File

@@ -175,7 +175,7 @@
],
"desc": "Temperatuur laten flitsen in het hoofdmenu zo lang de punt nog warm is"
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Kalibreer",
"temperatuur?"

2
Translations/translation_NL_BE.json
View File

@@ -175,7 +175,7 @@
],
"desc": "Temperatuur knippert in hoofdmenu tijdens afkoeling."
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Calibreer",
"temperatuur?"

2
Translations/translation_NO.json
View File

@@ -175,7 +175,7 @@
],
"desc": "Blink temperaturen på skjermen mens spissen fortsatt er varm."
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"TempKal?",
""

2
Translations/translation_PL.json
View File

@@ -175,7 +175,7 @@
],
"desc": "Temperatura miga podczas wychładzania, gdy grot jest wciąż gorący"
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Kalibracja",
"temp. grotu"

2
Translations/translation_PT.json
View File

@@ -175,7 +175,7 @@
],
"desc": "Faz o valor da temperatura piscar durante o arrefecimento"
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Calibrar",
"temperatura"

2
Translations/translation_RO.json
View File

@@ -175,7 +175,7 @@
],
"desc": "Clipeste temperatura după oprirea încălzirii, în timp ce vârful este încă fierbinte"
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Calibrare",
"temperatură?"

6
Translations/translation_RU.json
View File

@@ -8,7 +8,7 @@
],
"tempUnitFahrenheit": false,
"messages": {
"SettingsCalibrationWarning": "Прежде чем продолжить, убедитесь, что жала и ручка имеют комнатную температуру!",
"SettingsCalibrationWarning": "Перед калибровкой убедитесь, что жала и ручка имеют комнатную температуру!",
"SettingsResetWarning": "Вы уверены, что хотите сбросить настройки к значениям по умолчанию?",
"UVLOWarningString": "НАПРЯЖ--",
"UndervoltageString": "Низ. напряжение",
@@ -176,12 +176,12 @@
],
"desc": "Мигать температурой на экране охлаждения, пока жало еще горячее"
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Калибровка",
"температуры"
],
"desc": "Калибровка компенсации холодного спая жала (не требуется, если Delta T < 5°C)"
"desc": "Калибровка компенсации холодного спая жала при следующей загрузке (не требуется, если Delta T < 5°C)"
},
"SettingsReset": {
"text2": [

2
Translations/translation_SK.json
View File

@@ -175,7 +175,7 @@
],
"desc": "Blikanie ukazovateľa teploty počas chladnutia hrotu"
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Kalibrácia",
"teploty"

2
Translations/translation_SL.json
View File

@@ -175,7 +175,7 @@
],
"desc": "Ko je konica še vroča, utripaj prikaz temperature med hlajenjem."
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Kalibriram",
"temperaturo?"

2
Translations/translation_SR_CYRL.json
View File

@@ -175,7 +175,7 @@
],
"desc": "Приказ температуре трепће приликом хлађења докле год је врх и даље врућ."
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Калибрација",
"температуре"

2
Translations/translation_SR_LATN.json
View File

@@ -175,7 +175,7 @@
],
"desc": "Prikaz temperature trepće prilikom hlađenja dokle god je vrh i dalje vruć."
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Kalibracija",
"temperature"

2
Translations/translation_SV.json
View File

@@ -175,7 +175,7 @@
],
"desc": "Blinka temperaturen medan spetsen kyls av och fortfarande är varm."
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Kalibrera",
"temperatur?"

2
Translations/translation_TR.json
View File

@@ -178,7 +178,7 @@
],
"desc": "Soğutma ekranında uç hala sıcakken derece gösterilsin."
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"SCK KAL?",
""

2
Translations/translation_UK.json
View File

@@ -176,7 +176,7 @@
],
"desc": "Показувати температуру на екрані охолодження, поки жало залишається гарячим, при цьому екран моргає"
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Калібрування",
"температури"

2
Translations/translation_VI.json
View File

@@ -175,7 +175,7 @@
],
"desc": "-Nhap nháy nhiet đo sau khi viec gia nhiet tam dung trong khi mui hàn van nóng"
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": [
"Hieu chuan",
"nhiet đo?"

2
Translations/translation_YUE_HK.json
View File

@@ -115,7 +115,7 @@
"text2": "降温時閃爍",
"desc": "停止加熱之後，當焫雞咀仲係熱嗰陣閃爍畫面"
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": "温度校正？",
"desc": "開始校正焫雞咀温度位移"
},

2
Translations/translation_ZH_CN.json
View File

@@ -115,7 +115,7 @@
"text2": "降温时闪显",
"desc": "停止加热之后，闪动温度显示提醒烙铁头仍处于高温状态"
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": "温度校正？",
"desc": "开始校正烙铁头温度偏移"
},

2
Translations/translation_ZH_TW.json
View File

@@ -115,7 +115,7 @@
"text2": "降溫時閃爍",
"desc": "停止加熱之後，當烙鐵頭仍處於高溫時閃爍畫面"
},
"TemperatureCalibration": {
"CalibrateCJC": {
"text2": "溫度校正？",
"desc": "開始校正烙鐵頭溫度位移"
},

2
Translations/translations_def.js
View File

@@ -283,7 +283,7 @@ var def = ///
},
{
"id": "TemperatureCalibration",
"id": "CalibrateCJC",
"maxLen": 8,
"maxLen2": 15,
"description": "Used to calibrate the ADC+Op-amp offsets for the tip. This calibration must be performed when the tip temperature and the handle temperature are equal. Generally not required unless your device is reading more than 5°C off target."