updated translations

Translations/translation_BE.json

@@ -8,7 +8,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Перад тым, як працягнуць, каліласка, упэўнецеся, што джала мае комнатную тэмпературу!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Вы ўпэннены, што жадаеце зкінуць налады да першапачатковых значэнняў?",
 		"UVLOWarningString": "НАПРУГА--",
 		"UndervoltageString": "Нізкая напруга",
@@ -178,10 +178,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Каліброўка",
+				"Calibrate CJC",
-				"тэмпературы"
+				"at next boot"
 			],
-			"desc": "Каліброўка тэрмадатчыка джала"
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_BG.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Уверете се, че върха на поялника е със стайна температура преди да продължите!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Сигурни ли сте, че искате да върнете фабричните настройки?",
 		"UVLOWarningString": "Ниско DC Напрежение",
 		"UndervoltageString": "Ниско Напрежение",
@@ -177,10 +177,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Калибриране",
+				"Calibrate CJC",
-				"температура?"
+				"at next boot"
 			],
-			"desc": "Калибриране на температурата"
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_CS.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Ujistěte se, že hrot má pokojovou teplotu!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Opravdu chcete resetovat zařízení do továrního nastavení?",
 		"UVLOWarningString": "Nízké DC",
 		"UndervoltageString": "Nízké napětí",
@@ -177,10 +177,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Kalibrovat",
+				"Calibrate CJC",
-				"teplotu?"
+				"at next boot"
 			],
-			"desc": "Začít kalibraci měření teploty hrotu"
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_DA.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Sørg for at loddespidsen er ved stuetemperatur, inden du fortsætter!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Are you sure to reset settings to default values?",
 		"UVLOWarningString": "Lav Volt",
 		"UndervoltageString": "Undervoltage",
@@ -177,10 +177,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Calibrate",
+				"Calibrate CJC",
-				"temperature?"
+				"at next boot"
 			],
-			"desc": "kalibrere spids temperatur."
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_DE.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Nur Kalibrieren wenn Lötspitze & Gerät Raumtemperatur haben!",
+		"SettingsCalibrationWarning": "Bitte sicherstellen, dass Lötspitze & Gerät beim nächsten Start Raumtemperatur haben!",
 		"SettingsResetWarning": "Sicher, dass alle Werte zurückgesetzt werden sollen?",
 		"UVLOWarningString": "V niedr.",
 		"UndervoltageString": "Unterspannung",

Translations/translation_EL.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": true,
 	"messages": {
-		"SettingsCalibrationWarning": "Πριν προχωρήσετε, παρακαλώ σιγουρευτείτε πως η μύτη βρίσκεται σε θερμοκρασία δωματίου!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Σίγουρα θέλετε επαναφορά αρχικών ρυθμίσεων;",
 		"UVLOWarningString": "Χαμηλ DC",
 		"UndervoltageString": "Υπόταση",
@@ -180,10 +180,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Βαθμονόμηση",
+				"Calibrate CJC",
-				"θερμοκρασίας;"
+				"at next boot"
 			],
-			"desc": "Βαθμονόμηση αρχικής θερμοκρασίας μύτης"
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_EN.json

@@ -2,12 +2,11 @@
 	"languageCode": "EN",
 	"languageLocalName": "English",
 	"fonts": [
-		"ascii_basic",
+		"ascii_basic"
-		"latin_extended"
 	],
 	"tempUnitFahrenheit": true,
 	"messages": {
-		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature before calibration!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Are you sure you want to restore default settings?",
 		"UVLOWarningString": "DC LOW",
 		"UndervoltageString": "Undervoltage",
@@ -138,7 +137,7 @@
 				"Temperature",
 				"unit"
 			],
-			"desc": "C=°Celsius | F=°Fahrenheit"
+			"desc": "C=Celsius | F=Fahrenheit"
 		},
 		"AdvancedIdle": {
 			"text2": [
@@ -180,7 +179,7 @@
 				"Calibrate CJC",
 				"at next boot"
 			],
-			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_ES.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "¡Asegúrate que la punta esté a temperatura ambiente antes de empezar!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "¿Quieres restablecer los ajustes?",
 		"UVLOWarningString": "CC BAJA",
 		"UndervoltageString": "Voltaje bajo",
@@ -177,10 +177,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Calibrar temp.",
+				"Calibrate CJC",
-				"de la punta"
+				"at next boot"
 			],
-			"desc": "Calibra la desviación térmica de la punta."
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_FI.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Varmista että kärki on huoneenlämpöinen ennen jatkamista!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Haluatko varmasti palauttaa oletusarvot?",
 		"UVLOWarningString": "DC ALH.",
 		"UndervoltageString": "Alijännite",
@@ -177,10 +177,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Kalibroi",
+				"Calibrate CJC",
-				"lämpötila?"
+				"at next boot"
 			],
-			"desc": "Kalibroi kärjen lämpötilaeron"
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_FR.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Assurez-vous que la panne soit à température ambiante avant de continuer !",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Voulez-vous vraiment réinitialiser les paramètres aux valeurs par défaut ?",
 		"UVLOWarningString": "DC FAIBL",
 		"UndervoltageString": "Sous-tension",
@@ -177,10 +177,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Étalonner",
+				"Calibrate CJC",
-				"température"
+				"at next boot"
 			],
-			"desc": "Étalonner température de la panne"
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_HR.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Provjerite da je vršak ohlađen na sobnu temperaturu prije nego što nastavite!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Jeste li sigurni da želite sve postavke vratiti na tvorničke vrijednosti?",
 		"UVLOWarningString": "BATERIJA",
 		"UndervoltageString": "PRENIZAK NAPON",
@@ -177,10 +177,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Kalibracija",
+				"Calibrate CJC",
-				"temperature"
+				"at next boot"
 			],
-			"desc": "Kalibriranje temperature mjeri razliku temperatura vrška i drške, dok je lemilica hladna."
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_HU.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Folytatás előtt győződjön meg róla, hogy a forrasztó hegy szobahőmérsékletű!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Biztos visszaállítja a beállításokat alapértékekre?",
 		"UVLOWarningString": "DC TÚL KEVÉS",
 		"UndervoltageString": "Alulfeszültség",
@@ -177,10 +177,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Hőmérséklet",
+				"Calibrate CJC",
-				"kalibrálása?"
+				"at next boot"
 			],
-			"desc": "Forrasztó hegy hőmérséklet-érzékelőjének kalibrálása"
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_IT.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Assicurarsi che la punta si trovi a temperatura ambiente prima di continuare!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Ripristinare le impostazioni iniziali?",
 		"UVLOWarningString": "DC BASSA",
 		"UndervoltageString": "DC INSUFFICIENTE",
@@ -176,10 +176,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Calibrazione",
+				"Calibrate CJC",
-				"temperatura"
+				"at next boot"
 			],
-			"desc": "Calibra le rilevazioni di temperatura"
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_JA_JP.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": true,
 	"messages": {
-		"SettingsCalibrationWarning": "続行する前に、コテ先が室温と同じになっていることを確認してください",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "設定をリセットしますか？",
 		"UVLOWarningString": "電圧が低すぎます",
 		"UndervoltageString": "Undervoltage",
@@ -116,8 +116,8 @@
 			"desc": "加熱の停止後、コテ先が熱い間は温度表示を点滅する"
 		},
 		"CalibrateCJC": {
-			"text2": "温度校正",
+			"text2": "Calibrate CJC",
-			"desc": "コテ先の温度校正を開始する"
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
 		},
 		"SettingsReset": {
 			"text2": "設定をリセット",

Translations/translation_LT.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Prieš tęsdami įsitikinkite, kad antgalis yra kambario temperatūros!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Ar norite atstatyti nustatymus į numatytas reikšmes?",
 		"UVLOWarningString": "MAŽ VOLT",
 		"UndervoltageString": "Žema įtampa",
@@ -177,10 +177,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Kalibruoti",
+				"Calibrate CJC",
-				"temperatūrą?"
+				"at next boot"
 			],
-			"desc": "Antgalio temperatūros kalibravimas"
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_NL.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Zorg ervoor dat de punt op kamertemperatuur is voor je verder gaat!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Weet je zeker dat je de fabrieksinstellingen terug wilt zetten?",
 		"UVLOWarningString": "DC Laag",
 		"UndervoltageString": "Onderspanning",
@@ -177,10 +177,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Kalibreer",
+				"Calibrate CJC",
-				"temperatuur?"
+				"at next boot"
 			],
-			"desc": "Start punt temperatuur-kalibratie"
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_NL_BE.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Zorg vooraf dat de punt op kamertemperatuur is!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Ben je zeker dat je alle standaardwaarden wil resetten?",
 		"UVLOWarningString": "Voedingsspanning LAAG",
 		"UndervoltageString": "Onderspanning",
@@ -177,10 +177,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Calibreer",
+				"Calibrate CJC",
-				"temperatuur?"
+				"at next boot"
 			],
-			"desc": "Temperatuur van de punt calibreren."
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_NO.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Sørg for at loddespissen har romtemperatur før du fortsetter!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Er du sikker på at du vil tilbakestille til standardinnstillinger?",
 		"UVLOWarningString": "Lavspenn",
 		"UndervoltageString": "Underspenning",
@@ -177,10 +177,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"TempKal?",
+				"Calibrate CJC",
-				""
+				"at next boot"
 			],
-			"desc": "Kalibrer spiss-temperatur."
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_PL.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Przed kontynuowaniem upewnij się, że końcówka osiągnęła temperaturę pokojową!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Czy na pewno chcesz przywrócić ustawienia fabryczne?",
 		"UVLOWarningString": "NIS. NAP",
 		"UndervoltageString": "Zbyt niskie nap.",
@@ -177,10 +177,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Kalibracja",
+				"Calibrate CJC",
-				"temp. grotu"
+				"at next boot"
 			],
-			"desc": "Kalibracja temperatury grotu lutownicy"
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_PT.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "A ponta deve estar à temperatura ambiente antes de continuar!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Definições de fábrica?",
 		"UVLOWarningString": "DC BAIXO",
 		"UndervoltageString": "Subtensão",
@@ -177,10 +177,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Calibrar",
+				"Calibrate CJC",
-				"temperatura"
+				"at next boot"
 			],
-			"desc": "Calibra a temperatura"
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_RO.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": true,
 	"messages": {
-		"SettingsCalibrationWarning": "Vă rugăm să vă asigurati că vârful este la temperatura camerei, înainte de a continua!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Sigur doriti să restaurati la setările implicite?",
 		"UVLOWarningString": "DC LOW",
 		"UndervoltageString": "Sub tensiune",
@@ -177,10 +177,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Calibrare",
+				"Calibrate CJC",
-				"temperatură?"
+				"at next boot"
 			],
-			"desc": "Începeti calibrarea compensării de temperatură a vârfului"
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_RU.json

@@ -8,7 +8,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Перед калибровкой убедитесь, что жала и ручка имеют комнатную температуру!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Вы уверены, что хотите сбросить настройки к значениям по умолчанию?",
 		"UVLOWarningString": "НАПРЯЖ--",
 		"UndervoltageString": "Низ. напряжение",

Translations/translation_SK.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Najprv sa prosím uistite, že hrot má izbovú teplotu!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Naozaj chcete obnoviť továrenské nastavenia?",
 		"UVLOWarningString": "Nízke U!",
 		"UndervoltageString": "Nízke napätie",
@@ -177,10 +177,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Kalibrácia",
+				"Calibrate CJC",
-				"teploty"
+				"at next boot"
 			],
-			"desc": "Kalibrácia posunu teploty hrotu"
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_SL.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Pred nadaljevanjem mora biti konica segreta na sobno temperaturo!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Res želite ponastaviti na privzete nastavitve?",
 		"UVLOWarningString": "NIZKA U",
 		"UndervoltageString": "Nizka napetost",
@@ -177,10 +177,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Kalibriram",
+				"Calibrate CJC",
-				"temperaturo?"
+				"at next boot"
 			],
-			"desc": "Kalibracija temperature na konici."
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_SR_CYRL.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Проверите да ли је врх охлађен на собну температуру пре него што наставите",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Да ли заиста желите да вратите поставке на фабричке вредности?",
 		"UVLOWarningString": "НИЗ.НАП.",
 		"UndervoltageString": "ПРЕНИЗАК НАПОН",
@@ -177,10 +177,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Калибрација",
+				"Calibrate CJC",
-				"температуре"
+				"at next boot"
 			],
-			"desc": "Калибрисање одступања температуре врха у односу на дршку."
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_SR_LATN.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Proverite da li je vrh ohlađen na sobnu temperaturu pre nego što nastavite",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Da li zaista želite da vratite postavke na fabričke vrednosti?",
 		"UVLOWarningString": "NIZ.NAP.",
 		"UndervoltageString": "PRENIZAK NAPON",
@@ -177,10 +177,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Kalibracija",
+				"Calibrate CJC",
-				"temperature"
+				"at next boot"
 			],
-			"desc": "Kalibrisanje odstupanja temperature vrha u odnosu na dršku."
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_SV.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Se till att spetsen är rumstemererad innan du fortsätter!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Är du säker på att du vill återställa inställningarna?",
 		"UVLOWarningString": "DC LÅG",
 		"UndervoltageString": "Underspänning",
@@ -177,10 +177,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Kalibrera",
+				"Calibrate CJC",
-				"temperatur?"
+				"at next boot"
 			],
-			"desc": "Kalibrera spets-kompensation."
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_TR.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Lütfen devam etmeden önce ucun oda sıcaklığında olduğunu garantiye alın!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Ayarları varsayılan değerlere sıfırlamak istediğinizden emin misiniz?",
 		"UVLOWarningString": "Güç Az",
 		"UndervoltageString": "Düşük Voltaj",
@@ -180,10 +180,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"SCK KAL?",
+				"Calibrate CJC",
-				""
+				"at next boot"
 			],
-			"desc": "Ucu kalibre et."
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_UK.json

@@ -8,7 +8,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Переконайтеся, що жало охололо до кімнатної температури, перш ніж продовжувати!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Ви дійсно хочете скинути налаштування до значень за замовчуванням? (A=Так, В=Ні)",
 		"UVLOWarningString": "АККУМ--",
 		"UndervoltageString": "Низька напруга",
@@ -178,10 +178,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Калібрування",
+				"Calibrate CJC",
-				"температури"
+				"at next boot"
 			],
-			"desc": "Калібрування температурного датчика."
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_VI.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": false,
 	"messages": {
-		"SettingsCalibrationWarning": "Chac chan mui hàn o nhiet đo phòng truoc khi tiep tuc!",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "Ban chac chan muon khôi phuc tat ca cài đat ve mac đinh?",
 		"UVLOWarningString": "DC thap",
 		"UndervoltageString": "Đien áp thap",
@@ -177,10 +177,10 @@
 		},
 		"CalibrateCJC": {
 			"text2": [
-				"Hieu chuan",
+				"Calibrate CJC",
-				"nhiet đo?"
+				"at next boot"
 			],
-			"desc": "-Bat đau hieu chuan bù nhiet cho mui hàn"
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
 		},
 		"SettingsReset": {
 			"text2": [

Translations/translation_YUE_HK.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": true,
 	"messages": {
-		"SettingsCalibrationWarning": "開始温度校正之前，請先確定焫雞咀係處於室温！",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "你係咪確定要將全部設定重設到預設值？",
 		"UVLOWarningString": "電壓過低",
 		"UndervoltageString": "Undervoltage",
@@ -116,8 +116,8 @@
 			"desc": "停止加熱之後，當焫雞咀仲係熱嗰陣閃爍畫面"
 		},
 		"CalibrateCJC": {
-			"text2": "温度校正？",
+			"text2": "Calibrate CJC",
-			"desc": "開始校正焫雞咀温度位移"
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
 		},
 		"SettingsReset": {
 			"text2": "全部重設？",

Translations/translation_ZH_CN.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": true,
 	"messages": {
-		"SettingsCalibrationWarning": "开始温度校正前，请先确定烙铁头正处于室温！",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "你是否确定要将全部设定重置为默认值？",
 		"UVLOWarningString": "电压过低",
 		"UndervoltageString": "Undervoltage",
@@ -116,8 +116,8 @@
 			"desc": "停止加热之后，闪动温度显示提醒烙铁头仍处于高温状态"
 		},
 		"CalibrateCJC": {
-			"text2": "温度校正？",
+			"text2": "Calibrate CJC",
-			"desc": "开始校正烙铁头温度偏移"
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
 		},
 		"SettingsReset": {
 			"text2": "全部重置？",

Translations/translation_ZH_TW.json

@@ -7,7 +7,7 @@
 	],
 	"tempUnitFahrenheit": true,
 	"messages": {
-		"SettingsCalibrationWarning": "開始溫度校正前，請先確定烙鐵頭正處於室溫！",
+		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
 		"SettingsResetWarning": "你是否確定要將全部設定重設到預設值？",
 		"UVLOWarningString": "電壓過低",
 		"UndervoltageString": "Undervoltage",
@@ -116,8 +116,8 @@
 			"desc": "停止加熱之後，當烙鐵頭仍處於高溫時閃爍畫面"
 		},
 		"CalibrateCJC": {
-			"text2": "溫度校正？",
+			"text2": "Calibrate CJC",
-			"desc": "開始校正烙鐵頭溫度位移"
+			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
 		},
 		"SettingsReset": {
 			"text2": "全部重設？",