From 4ec62f8c8f6299da110ce116e1d91791e5e6894f Mon Sep 17 00:00:00 2001
From: "Ben V. Brown" <Ralim@Ralimtek.com>
Date: Fri, 22 May 2020 23:30:09 +1000
Subject: [PATCH 1/8] Create settings field for power pulse

---
 workspace/TS100/Core/Inc/Settings.h   | 19 +++++++++++--------
 workspace/TS100/Core/Src/Settings.cpp |  2 +-
 2 files changed, 12 insertions(+), 9 deletions(-)

diff --git a/workspace/TS100/Core/Inc/Settings.h b/workspace/TS100/Core/Inc/Settings.h
index f79b3fe5..604ca1b9 100644
--- a/workspace/TS100/Core/Inc/Settings.h
+++ b/workspace/TS100/Core/Inc/Settings.h
@@ -12,7 +12,7 @@
 #include <stdint.h>
 #include "stm32f1xx_hal.h"
 #include "unit.h"
-#define SETTINGSVERSION   ( 0x1E )
+#define SETTINGSVERSION   ( 0x1F )
 /*Change this if you change the struct below to prevent people getting \
           out of sync*/
 
@@ -21,6 +21,8 @@
  * flash in uint16_t chunks
  */
 typedef struct {
+	uint8_t version;   // Used to track if a reset is needed on firmware upgrade
+
 	uint16_t SolderingTemp;  // current set point for the iron
 	uint16_t SleepTemp;      // temp to drop to in sleep
 	uint8_t SleepTime;       // minutes timeout to sleep
@@ -37,25 +39,26 @@ typedef struct {
 	uint8_t detailedIDLE :1;       // Detailed idle screen
 	uint8_t detailedSoldering :1;  // Detailed soldering screens
 #ifdef ENABLED_FAHRENHEIT_SUPPORT
-	uint8_t temperatureInF;         // Should the temp be in F or C (true is F)
+	uint8_t temperatureInF :1;       // Should the temp be in F or C (true is F)
 #endif
 	uint8_t descriptionScrollSpeed :1;  // Description scroll speed
+	uint8_t KeepAwakePulse;         // Keep Awake pulse power in 0.1 watts (10 = 1Watt)
+
 	uint16_t voltageDiv;                 // Voltage divisor factor
 	uint16_t BoostTemp;                  // Boost mode set point for the iron
 	uint16_t CalibrationOffset; // This stores the temperature offset for this tip
 								// in the iron.
 
-	uint8_t pidPowerLimit;
-
 	uint8_t powerLimitEnable; // Allow toggling of power limit without changing value
 	uint8_t powerLimit;       // Maximum power iron allowed to output
 
-	uint8_t version;  // Used to track if a reset is needed on firmware upgrade
+	uint8_t ReverseButtonTempChangeEnabled; // Change the plus and minus button assigment
+	uint16_t TempChangeLongStep;   // Change the plus and minus button assigment
+	uint16_t TempChangeShortStep;  // Change the plus and minus button assigment
+
 	uint32_t padding;  // This is here for in case we are not an even divisor so
 					   // that nothing gets cut off
-  uint8_t ReverseButtonTempChangeEnabled;   // Change the plus and minus button assigment
-  uint16_t TempChangeLongStep;              // Change the plus and minus button assigment
-  uint16_t TempChangeShortStep;             // Change the plus and minus button assigment
+					   //MUST BE LAST
 
 } systemSettingsType;
 
diff --git a/workspace/TS100/Core/Src/Settings.cpp b/workspace/TS100/Core/Src/Settings.cpp
index d8a36049..2d0352a0 100644
--- a/workspace/TS100/Core/Src/Settings.cpp
+++ b/workspace/TS100/Core/Src/Settings.cpp
@@ -101,10 +101,10 @@ void resetSettings() {
 	systemSettings.descriptionScrollSpeed = DESCRIPTION_SCROLL_SPEED;  // default to slow
 	systemSettings.powerLimitEnable = POWER_LIMIT_ENABLE; // Default to no power limit
 	systemSettings.CalibrationOffset = CALIBRATION_OFFSET;  // the adc offset in uV
-	systemSettings.pidPowerLimit = PID_POWER_LIMIT;  // Sets the max pwm power limit
 	systemSettings.powerLimit = POWER_LIMIT; // 30 watts default limit
 	systemSettings.ReverseButtonTempChangeEnabled = REVERSE_BUTTON_TEMP_CHANGE; //
 	systemSettings.TempChangeShortStep = TEMP_CHANGE_SHORT_STEP; //
 	systemSettings.TempChangeLongStep = TEMP_CHANGE_LONG_STEP; //
+	systemSettings.KeepAwakePulse= 3;
 	saveSettings();  // Save defaults
 }

From 3287ee9d780e43cba62eb31cc5980baf680e75f7 Mon Sep 17 00:00:00 2001
From: "Ben V. Brown" <Ralim@Ralimtek.com>
Date: Fri, 22 May 2020 23:30:20 +1000
Subject: [PATCH 2/8] Change to using setting to control power pulse

---
 workspace/TS100/Core/Src/main.cpp | 62 ++++++++++++++++---------------
 1 file changed, 32 insertions(+), 30 deletions(-)

diff --git a/workspace/TS100/Core/Src/main.cpp b/workspace/TS100/Core/Src/main.cpp
index 85a734a7..9aa15ed4 100644
--- a/workspace/TS100/Core/Src/main.cpp
+++ b/workspace/TS100/Core/Src/main.cpp
@@ -36,15 +36,13 @@ uint32_t MOVTaskBuffer[MOVTaskStackSize];
 osStaticThreadDef_t MOVTaskControlBlock;
 
 static TaskHandle_t pidTaskNotification = NULL;
-
+static TickType_t powerPulseRate = 1000;
+static TickType_t powerPulseDuration = 50;
 void startGUITask(void const *argument);
 void startPIDTask(void const *argument);
 void startMOVTask(void const *argument);
 // End FreeRTOS
 
-static const int maxPowerIdleTicks = 1000;
-static const int powerPulseTicks = 50;
-static const int x10PowerPulseWatts = 3;
 
 // Main sets up the hardware then hands over to the FreeRTOS kernel
 int main(void) {
@@ -117,7 +115,8 @@ void startPIDTask(void const *argument __unused) {
 #ifdef MODEL_TS80
 	//Set power management code to the tip resistance in ohms * 10
 
-	TickType_t lastPowerPulse = 0;
+	TickType_t lastPowerPulseStart = 0;
+	TickType_t lastPowerPulseEnd = 0;
 #else
 
 #endif
@@ -183,18 +182,23 @@ void startPIDTask(void const *argument __unused) {
 				//  Unfortunately, our temp signal is too noisy to really help.
 
 			}
-#ifdef MODEL_TS80
-			//If its a TS80, we want to have the option of using an occasional pulse to keep the power bank on
-			if (((xTaskGetTickCount() - lastPowerPulse) > maxPowerIdleTicks)
-					&& (x10WattsOut < x10PowerPulseWatts)) {
-				x10WattsOut = x10PowerPulseWatts;
+			//If the user turns on the option of using an occasional pulse to keep the power bank on
+			if (systemSettings.KeepAwakePulse) {
+
+				if (xTaskGetTickCount() - lastPowerPulseStart
+						> powerPulseRate) {
+					lastPowerPulseStart = xTaskGetTickCount();
+					lastPowerPulseEnd = lastPowerPulseStart
+							+ powerPulseDuration;
+				}
+
+				//If current PID is less than the pulse level, check if we want to constrain to the pulse as the floor
+				if (x10WattsOut < systemSettings.KeepAwakePulse
+						&& xTaskGetTickCount() < lastPowerPulseEnd) {
+					x10WattsOut = systemSettings.KeepAwakePulse;
+				}
 			}
-			if (((xTaskGetTickCount() - lastPowerPulse)
-					> (maxPowerIdleTicks + powerPulseTicks))
-					&& (x10WattsOut >= x10PowerPulseWatts)) {
-				lastPowerPulse = xTaskGetTickCount();
-			}
-#endif
+
 			//Secondary safety check to forcefully disable header when within ADC noise of top of ADC
 			if (getTipRawTemp(0) > (0x7FFF - 150)) {
 				x10WattsOut = 0;
@@ -263,8 +267,7 @@ void startMOVTask(void const *argument __unused) {
 		datax[currentPointer] = (int32_t) tx;
 		datay[currentPointer] = (int32_t) ty;
 		dataz[currentPointer] = (int32_t) tz;
-		if (!accelInit)
-		{
+		if (!accelInit) {
 			for (uint8_t i = currentPointer + 1; i < MOVFilter; i++) {
 				datax[i] = (int32_t) tx;
 				datay[i] = (int32_t) ty;
@@ -304,19 +307,20 @@ void startMOVTask(void const *argument __unused) {
 
 // Second last page of flash set aside for logo image.
 #define FLASH_LOGOADDR (0x8000000 | 0xF800)
-   
+
 // Logo header signature.
 #define LOGO_HEADER_VALUE 0xF00DAA55
 
 bool showBootLogoIfavailable() {
-    // Do not show logo data if signature is not found.
-    if (LOGO_HEADER_VALUE != *(reinterpret_cast<const uint32_t *>(FLASH_LOGOADDR))) {
-        return false;
-    }
+// Do not show logo data if signature is not found.
+	if (LOGO_HEADER_VALUE
+			!= *(reinterpret_cast<const uint32_t*>(FLASH_LOGOADDR))) {
+		return false;
+	}
 
-    OLED::drawAreaSwapped(0, 0, 96, 16, (uint8_t*) (FLASH_LOGOADDR + 4));
-    OLED::refresh();
-    return true;
+	OLED::drawAreaSwapped(0, 0, 96, 16, (uint8_t*) (FLASH_LOGOADDR + 4));
+	OLED::refresh();
+	return true;
 }
 
 /*
@@ -344,12 +348,10 @@ void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c __unused) {
 	FRToSI2C::CpltCallback();
 }
 void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c __unused) {
-	asm("bkpt");
 
 	FRToSI2C::CpltCallback();
 }
 void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c __unused) {
-	//asm("bkpt");
 
 	FRToSI2C::CpltCallback();
 }
@@ -358,7 +360,7 @@ void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c __unused) {
 }
 void vApplicationStackOverflowHook(xTaskHandle *pxTask __unused,
 		signed portCHAR *pcTaskName __unused) {
-	asm("bkpt");
-	// We dont have a good way to handle a stack overflow at this point in time
+
+// We dont have a good way to handle a stack overflow at this point in time
 	NVIC_SystemReset();
 }

From 76721d5f0d982ce3a3581f35ec9af8107a8d0620 Mon Sep 17 00:00:00 2001
From: "Ben V. Brown" <Ralim@Ralimtek.com>
Date: Fri, 22 May 2020 23:44:22 +1000
Subject: [PATCH 3/8] Roughing menu calls in

---
 workspace/TS100/Core/Src/gui.cpp | 124 +++++++++++++++++++------------
 workspace/TS100/configuration.h  |   6 +-
 2 files changed, 79 insertions(+), 51 deletions(-)

diff --git a/workspace/TS100/Core/Src/gui.cpp b/workspace/TS100/Core/Src/gui.cpp
index a38aae4d..082bfa33 100644
--- a/workspace/TS100/Core/Src/gui.cpp
+++ b/workspace/TS100/Core/Src/gui.cpp
@@ -21,8 +21,8 @@ void gui_Menu(const menuitem *menu);
   static void settings_setInputVRange(void);
   static void settings_displayInputVRange(void);
 #else
-  static void settings_setInputPRange(void);
-  static void settings_displayInputPRange(void);
+static void settings_setInputPRange(void);
+static void settings_displayInputPRange(void);
 #endif
 static void settings_setSleepTemp(void);
 static void settings_displaySleepTemp(void);
@@ -68,6 +68,8 @@ static void settings_displayTempChangeShortStep(void);
 static void settings_setTempChangeShortStep(void);
 static void settings_displayTempChangeLongStep(void);
 static void settings_setTempChangeLongStep(void);
+static void settings_displayPowerPulse(void);
+static void settings_setPowerPulse(void);
 
 // Menu functions
 static void settings_displaySolderingMenu(void);
@@ -157,9 +159,9 @@ const menuitem solderingMenu[] = {
 { (const char*) SettingsDescriptions[10], { settings_setAutomaticStartMode }, {
 		settings_displayAutomaticStartMode } }, /*Auto start*/
 { (const char*) SettingsDescriptions[24], { settings_setTempChangeShortStep }, {
-    settings_displayTempChangeShortStep } }, /*Temp change short step*/
+		settings_displayTempChangeShortStep } }, /*Temp change short step*/
 { (const char*) SettingsDescriptions[25], { settings_setTempChangeLongStep }, {
-    settings_displayTempChangeLongStep } }, /*Temp change long step*/
+		settings_displayTempChangeLongStep } }, /*Temp change long step*/
 { NULL, { NULL }, { NULL } }                // end of menu marker. DO NOT REMOVE
 };
 const menuitem UIMenu[] = {
@@ -172,18 +174,21 @@ const menuitem UIMenu[] = {
  *  Reverse Temp change buttons + - 
  */
 #ifdef ENABLED_FAHRENHEIT_SUPPORT
-{ (const char*) SettingsDescriptions[5], { settings_setTempF }, {
-		settings_displayTempF } }, /* Temperature units*/
+		{ (const char*) SettingsDescriptions[5], { settings_setTempF }, {
+				settings_displayTempF } }, /* Temperature units*/
 #endif
-{ (const char*) SettingsDescriptions[7], { settings_setDisplayRotation }, {
-		settings_displayDisplayRotation } }, /*Display Rotation*/
-{ (const char*) SettingsDescriptions[11], { settings_setCoolingBlinkEnabled }, {
-		settings_displayCoolingBlinkEnabled } }, /*Cooling blink warning*/
-{ (const char*) SettingsDescriptions[16], { settings_setScrollSpeed }, {
-		settings_displayScrollSpeed } }, /*Scroll Speed for descriptions*/
-{ (const char*) SettingsDescriptions[23], { settings_setReverseButtonTempChangeEnabled }, {
-    settings_displayReverseButtonTempChangeEnabled } }, /* Reverse Temp change buttons + - */
-{ NULL, { NULL }, { NULL } }           // end of menu marker. DO NOT REMOVE
+		{ (const char*) SettingsDescriptions[7],
+				{ settings_setDisplayRotation }, {
+						settings_displayDisplayRotation } }, /*Display Rotation*/
+		{ (const char*) SettingsDescriptions[11], {
+				settings_setCoolingBlinkEnabled }, {
+				settings_displayCoolingBlinkEnabled } }, /*Cooling blink warning*/
+		{ (const char*) SettingsDescriptions[16], { settings_setScrollSpeed }, {
+				settings_displayScrollSpeed } }, /*Scroll Speed for descriptions*/
+		{ (const char*) SettingsDescriptions[23], {
+				settings_setReverseButtonTempChangeEnabled }, {
+				settings_displayReverseButtonTempChangeEnabled } }, /* Reverse Temp change buttons + - */
+		{ NULL, { NULL }, { NULL } }        // end of menu marker. DO NOT REMOVE
 };
 const menuitem PowerMenu[] = {
 /*
@@ -212,6 +217,7 @@ const menuitem advancedMenu[] = {
  *  Calibrate Temperature
  *  Calibrate Input V
  *  Reset Settings
+ *  Power Pulse
  */
 { (const char*) SettingsDescriptions[21], { settings_setPowerLimitEnable }, {
 		settings_displayPowerLimitEnable } }, /*Power limit enable*/
@@ -228,6 +234,8 @@ const menuitem advancedMenu[] = {
 		settings_displayCalibrate } }, /*Calibrate tip*/
 { (const char*) SettingsDescriptions[14], { settings_setCalibrateVIN }, {
 		settings_displayCalibrateVIN } }, /*Voltage input cal*/
+{ (const char*) SettingsDescriptions[16], { settings_setPowerPulse }, {
+		settings_displayPowerPulse } }, /*Power Pulse adjustment */
 { NULL, { NULL }, { NULL } }  // end of menu marker. DO NOT REMOVE
 };
 
@@ -366,8 +374,7 @@ static void settings_setSleepTemp(void) {
 		systemSettings.SleepTemp += 20;
 		if (systemSettings.SleepTemp > 580)
 			systemSettings.SleepTemp = 120;
-	} 
-	else
+	} else
 #endif
 	{
 		systemSettings.SleepTemp += 10;
@@ -487,12 +494,12 @@ static void settings_displayAdvancedIDLEScreens(void) {
 }
 
 static void settings_setPowerLimitEnable(void) {
-		systemSettings.powerLimitEnable = !systemSettings.powerLimitEnable;
+	systemSettings.powerLimitEnable = !systemSettings.powerLimitEnable;
 }
 
 static void settings_displayPowerLimitEnable(void) {
-		printShortDescription(21, 7);
-		OLED::drawCheckbox(systemSettings.powerLimitEnable);
+	printShortDescription(21, 7);
+	OLED::drawCheckbox(systemSettings.powerLimitEnable);
 }
 
 static void settings_setPowerLimit(void) {
@@ -503,9 +510,9 @@ static void settings_setPowerLimit(void) {
 }
 
 static void settings_displayPowerLimit(void) {
-		printShortDescription(22, 5);
-		OLED::printNumber(systemSettings.powerLimit, 2);
-		OLED::print(SymbolWatts);
+	printShortDescription(22, 5);
+	OLED::printNumber(systemSettings.powerLimit, 2);
+	OLED::print(SymbolWatts);
 }
 
 static void settings_setScrollSpeed(void) {
@@ -575,7 +582,7 @@ static void settings_setBoostTemp(void) {
 		if (systemSettings.BoostTemp > 850) {
 			systemSettings.BoostTemp = 480;  // loop back at 250
 		}
-	} else 
+	} else
 #endif
 	{
 		systemSettings.BoostTemp += 10;  // Go up 10C at a time
@@ -746,46 +753,65 @@ static void settings_setCalibrateVIN(void) {
 }
 
 static void settings_setReverseButtonTempChangeEnabled(void) {
-  systemSettings.ReverseButtonTempChangeEnabled = !systemSettings.ReverseButtonTempChangeEnabled;
+	systemSettings.ReverseButtonTempChangeEnabled =
+			!systemSettings.ReverseButtonTempChangeEnabled;
 }
 
-static void settings_displayReverseButtonTempChangeEnabled(void){
-  printShortDescription(23, 7);
-  OLED::drawCheckbox(systemSettings.ReverseButtonTempChangeEnabled);
+static void settings_displayReverseButtonTempChangeEnabled(void) {
+	printShortDescription(23, 7);
+	OLED::drawCheckbox(systemSettings.ReverseButtonTempChangeEnabled);
 }
 
 static void settings_setTempChangeShortStep(void) {
-  systemSettings.TempChangeShortStep += TEMP_CHANGE_SHORT_STEP;
-  if (systemSettings.TempChangeShortStep > TEMP_CHANGE_SHORT_STEP_MAX) {
-    systemSettings.TempChangeShortStep = TEMP_CHANGE_SHORT_STEP;  // loop back at TEMP_CHANGE_SHORT_STEP_MAX
-  }
+	systemSettings.TempChangeShortStep += TEMP_CHANGE_SHORT_STEP;
+	if (systemSettings.TempChangeShortStep > TEMP_CHANGE_SHORT_STEP_MAX) {
+		systemSettings.TempChangeShortStep = TEMP_CHANGE_SHORT_STEP; // loop back at TEMP_CHANGE_SHORT_STEP_MAX
+	}
 }
 static void settings_displayTempChangeShortStep(void) {
-  printShortDescription(24, 5);
-  OLED::printNumber(systemSettings.TempChangeShortStep, 3);
+	printShortDescription(24, 5);
+	OLED::printNumber(systemSettings.TempChangeShortStep, 3);
 }
 
 static void settings_setTempChangeLongStep(void) {
-  systemSettings.TempChangeLongStep += TEMP_CHANGE_LONG_STEP;
-  if (systemSettings.TempChangeLongStep > TEMP_CHANGE_LONG_STEP_MAX) {
-    systemSettings.TempChangeLongStep = TEMP_CHANGE_LONG_STEP;  // loop back at TEMP_CHANGE_LONG_STEP_MAX
-  }
+	systemSettings.TempChangeLongStep += TEMP_CHANGE_LONG_STEP;
+	if (systemSettings.TempChangeLongStep > TEMP_CHANGE_LONG_STEP_MAX) {
+		systemSettings.TempChangeLongStep = TEMP_CHANGE_LONG_STEP; // loop back at TEMP_CHANGE_LONG_STEP_MAX
+	}
 }
 static void settings_displayTempChangeLongStep(void) {
-  printShortDescription(25, 5);
-  OLED::printNumber(systemSettings.TempChangeLongStep, 3);
+	printShortDescription(25, 5);
+	OLED::printNumber(systemSettings.TempChangeLongStep, 3);
 }
 
+static void settings_setPowerPulse(void) {
+	systemSettings.KeepAwakePulse += POWER_PULSE_INCREMENT;
+	if (systemSettings.KeepAwakePulse > POWER_PULSE_MAX) {
+		systemSettings.KeepAwakePulse = POWER_PULSE_MAX;  // loop back to 0
+	}
+}
+static void settings_displayPowerPulse(void) {
+	printShortDescription(26, 5);
+	if (systemSettings.TempChangeLongStep) {
+		OLED::printNumber(systemSettings.TempChangeLongStep / 10, 1);
+		OLED::print(SymbolDot);
+		OLED::printNumber(systemSettings.TempChangeLongStep % 10, 1);
+	} else {
+		OLED::drawCheckbox(false);
+	}
+
+}
 static void displayMenu(size_t index) {
-	// Call into the menu
+// Call into the menu
 	OLED::setFont(1);
 	OLED::setCursor(0, 0);
-	// Draw title
+// Draw title
 	OLED::print(SettingsMenuEntries[index]);
-	// Draw symbol
-	// 16 pixel wide image
-	// 2 pixel wide scrolling indicator
-	OLED::drawArea(96 - 16 - 2, 0, 16, 16, (&SettingsMenuIcons[(16 * 2) * index]));
+// Draw symbol
+// 16 pixel wide image
+// 2 pixel wide scrolling indicator
+	OLED::drawArea(96 - 16 - 2, 0, 16, 16,
+			(&SettingsMenuIcons[(16 * 2) * index]));
 }
 
 static void settings_displayCalibrateVIN(void) {
@@ -817,7 +843,7 @@ static void settings_enterAdvancedMenu(void) {
 }
 
 void gui_Menu(const menuitem *menu) {
-	// Draw the settings menu and provide iteration support etc
+// Draw the settings menu and provide iteration support etc
 	uint8_t currentScreen = 0;
 	uint32_t autoRepeatTimer = 0;
 	uint8_t autoRepeatAcceleration = 0;
@@ -834,7 +860,7 @@ void gui_Menu(const menuitem *menu) {
 		scrollContentSize += 1;
 	}
 
-	// Animated menu opening.
+// Animated menu opening.
 	if (menu[currentScreen].draw.func != NULL) {
 		// This menu is drawn in a secondary framebuffer.
 		// Then we play a transition from the current primary
@@ -874,7 +900,7 @@ void gui_Menu(const menuitem *menu) {
 					((xTaskGetTickCount() - descriptionStart)
 							/ (systemSettings.descriptionScrollSpeed == 1 ?
 									1 : 2));
-			descriptionOffset %= descriptionWidth;  // Roll around at the end
+			descriptionOffset %= descriptionWidth;	// Roll around at the end
 			if (lastOffset != descriptionOffset) {
 				OLED::clearScreen();
 				OLED::setCursor((OLED_WIDTH - descriptionOffset), 0);
diff --git a/workspace/TS100/configuration.h b/workspace/TS100/configuration.h
index d56f4f83..7b75c691 100644
--- a/workspace/TS100/configuration.h
+++ b/workspace/TS100/configuration.h
@@ -54,7 +54,9 @@
 #define TEMP_CHANGE_SHORT_STEP_MAX  50        // Temp change short step MAX value
 #define TEMP_CHANGE_LONG_STEP_MAX   100       // Temp change long step MAX value
 
-
+/* Power pulse for keeping power banks awake*/
+#define POWER_PULSE_INCREMENT 1
+#define POWER_PULSE_MAX 50 // x10 max watts
 /**
  * OLED Orientation Sensitivity on Automatic mode!
  * Motion Sensitivity <0=Off 1=Least Sensitive 9=Most Sensitive>
@@ -105,4 +107,4 @@
   #define OP_AMP_Rf               180*1000  //  180  Kilo-ohms -> From schematic, R6
   #define OP_AMP_Rin              2000      //  2.0  Kilo-ohms -> From schematic, R3
   #define TIP_GAIN                115
-#endif
\ No newline at end of file
+#endif

From 65e804e54e49bded4bd79bbe424fbc4bb0e823ed Mon Sep 17 00:00:00 2001
From: "Ben V. Brown" <Ralim@Ralimtek.com>
Date: Fri, 22 May 2020 23:56:40 +1000
Subject: [PATCH 4/8] Add field for power pulse

---
 Translation Editor/translation_bg.json      | 8 ++++++++
 Translation Editor/translation_cs.json      | 8 ++++++++
 Translation Editor/translation_da.json      | 8 ++++++++
 Translation Editor/translation_de.json      | 8 ++++++++
 Translation Editor/translation_en.json      | 8 ++++++++
 Translation Editor/translation_es.json      | 8 ++++++++
 Translation Editor/translation_fi.json      | 8 ++++++++
 Translation Editor/translation_fr.json      | 8 ++++++++
 Translation Editor/translation_hr.json      | 8 ++++++++
 Translation Editor/translation_hu.json      | 8 ++++++++
 Translation Editor/translation_it.json      | 8 ++++++++
 Translation Editor/translation_lt.json      | 8 ++++++++
 Translation Editor/translation_nl.json      | 8 ++++++++
 Translation Editor/translation_nl_be.json   | 8 ++++++++
 Translation Editor/translation_no.json      | 8 ++++++++
 Translation Editor/translation_pl.json      | 8 ++++++++
 Translation Editor/translation_pt.json      | 8 ++++++++
 Translation Editor/translation_ru.json      | 8 ++++++++
 Translation Editor/translation_sk.json      | 8 ++++++++
 Translation Editor/translation_sl.json      | 8 ++++++++
 Translation Editor/translation_sr_cyrl.json | 8 ++++++++
 Translation Editor/translation_sr_latn.json | 8 ++++++++
 Translation Editor/translation_sv.json      | 8 ++++++++
 Translation Editor/translation_tr.json      | 8 ++++++++
 Translation Editor/translation_uk.json      | 8 ++++++++
 Translation Editor/translations_def.js      | 5 +++++
 workspace/TS100/Core/Inc/Translation.h      | 4 ++--
 27 files changed, 207 insertions(+), 2 deletions(-)

diff --git a/Translation Editor/translation_bg.json b/Translation Editor/translation_bg.json
index 0efd7432..35b576ed 100644
--- a/Translation Editor/translation_bg.json	
+++ b/Translation Editor/translation_bg.json	
@@ -273,6 +273,14 @@
 				"long?"
 			],
 			"desc": "Temperature change steps on long button press!"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
\ No newline at end of file
diff --git a/Translation Editor/translation_cs.json b/Translation Editor/translation_cs.json
index a4ff9ba3..2c393be4 100644
--- a/Translation Editor/translation_cs.json	
+++ b/Translation Editor/translation_cs.json	
@@ -274,6 +274,14 @@
 				"long?"
 			],
 			"desc": "Temperature change steps on long button press!"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
\ No newline at end of file
diff --git a/Translation Editor/translation_da.json b/Translation Editor/translation_da.json
index 57910eb9..a0e8b391 100644
--- a/Translation Editor/translation_da.json	
+++ b/Translation Editor/translation_da.json	
@@ -273,6 +273,14 @@
 				"long?"
 			],
 			"desc": "Temperature change steps on long button press!"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
\ No newline at end of file
diff --git a/Translation Editor/translation_de.json b/Translation Editor/translation_de.json
index 5097547f..c14fcda7 100644
--- a/Translation Editor/translation_de.json	
+++ b/Translation Editor/translation_de.json	
@@ -277,6 +277,14 @@
 				"Taste Lang?"
 			],
 			"desc": "Temperaturwechselschritte bei langem Tastendruck!"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
\ No newline at end of file
diff --git a/Translation Editor/translation_en.json b/Translation Editor/translation_en.json
index 70b66bc0..f170bc8c 100644
--- a/Translation Editor/translation_en.json	
+++ b/Translation Editor/translation_en.json	
@@ -276,6 +276,14 @@
 				"long"
 			],
 			"desc": "Temperature change steps on long button press"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
diff --git a/Translation Editor/translation_es.json b/Translation Editor/translation_es.json
index 07f19835..6171e4b8 100644
--- a/Translation Editor/translation_es.json	
+++ b/Translation Editor/translation_es.json	
@@ -275,6 +275,14 @@
 				"long?"
 			],
 			"desc": "Temperature change steps on long button press!"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
\ No newline at end of file
diff --git a/Translation Editor/translation_fi.json b/Translation Editor/translation_fi.json
index bbeaa8ed..9f5b37a5 100644
--- a/Translation Editor/translation_fi.json	
+++ b/Translation Editor/translation_fi.json	
@@ -273,6 +273,14 @@
 				"long?"
 			],
 			"desc": "Temperature change steps on long button press!"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
\ No newline at end of file
diff --git a/Translation Editor/translation_fr.json b/Translation Editor/translation_fr.json
index 98fd92dd..2cfc8e92 100644
--- a/Translation Editor/translation_fr.json	
+++ b/Translation Editor/translation_fr.json	
@@ -273,6 +273,14 @@
 				"Long?"
 			],
 			"desc": "Incrément de changement de température sur appui long."
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
diff --git a/Translation Editor/translation_hr.json b/Translation Editor/translation_hr.json
index a6839354..bf7c0c29 100644
--- a/Translation Editor/translation_hr.json	
+++ b/Translation Editor/translation_hr.json	
@@ -273,6 +273,14 @@
 				"long?"
 			],
 			"desc": "Temperature change steps on long button press!"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
\ No newline at end of file
diff --git a/Translation Editor/translation_hu.json b/Translation Editor/translation_hu.json
index a9b770c2..5f09dead 100644
--- a/Translation Editor/translation_hu.json	
+++ b/Translation Editor/translation_hu.json	
@@ -273,6 +273,14 @@
 				"long?"
 			],
 			"desc": "Temperature change steps on long button press!"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
\ No newline at end of file
diff --git a/Translation Editor/translation_it.json b/Translation Editor/translation_it.json
index 1c0f7562..80c97f31 100644
--- a/Translation Editor/translation_it.json	
+++ b/Translation Editor/translation_it.json	
@@ -275,6 +275,14 @@
 				"pressione lunga"
 			],
 			"desc": "Varia la temperatura della punta attraverso una lunga pressione dei tasti"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
diff --git a/Translation Editor/translation_lt.json b/Translation Editor/translation_lt.json
index ec891f64..929ea2b9 100644
--- a/Translation Editor/translation_lt.json	
+++ b/Translation Editor/translation_lt.json	
@@ -273,6 +273,14 @@
 				"long?"
 			],
 			"desc": "Temperature change steps on long button press!"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
\ No newline at end of file
diff --git a/Translation Editor/translation_nl.json b/Translation Editor/translation_nl.json
index efbc0d5e..8af5ab72 100644
--- a/Translation Editor/translation_nl.json	
+++ b/Translation Editor/translation_nl.json	
@@ -273,6 +273,14 @@
 				"long?"
 			],
 			"desc": "Temperature change steps on long button press!"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
\ No newline at end of file
diff --git a/Translation Editor/translation_nl_be.json b/Translation Editor/translation_nl_be.json
index 37bd4f57..93f16df4 100644
--- a/Translation Editor/translation_nl_be.json	
+++ b/Translation Editor/translation_nl_be.json	
@@ -273,6 +273,14 @@
 				"long?"
 			],
 			"desc": "Temperature change steps on long button press!"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
\ No newline at end of file
diff --git a/Translation Editor/translation_no.json b/Translation Editor/translation_no.json
index ac7917fb..e788aa16 100644
--- a/Translation Editor/translation_no.json	
+++ b/Translation Editor/translation_no.json	
@@ -273,6 +273,14 @@
 				"long?"
 			],
 			"desc": "Temperature change steps on long button press!"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
\ No newline at end of file
diff --git a/Translation Editor/translation_pl.json b/Translation Editor/translation_pl.json
index 6959da7a..97d5fe64 100644
--- a/Translation Editor/translation_pl.json	
+++ b/Translation Editor/translation_pl.json	
@@ -273,6 +273,14 @@
 				"long?"
 			],
 			"desc": "Temperature change steps on long button press!"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
\ No newline at end of file
diff --git a/Translation Editor/translation_pt.json b/Translation Editor/translation_pt.json
index aca5d524..5f7c83a8 100644
--- a/Translation Editor/translation_pt.json	
+++ b/Translation Editor/translation_pt.json	
@@ -273,6 +273,14 @@
 				"long?"
 			],
 			"desc": "Temperature change steps on long button press!"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
\ No newline at end of file
diff --git a/Translation Editor/translation_ru.json b/Translation Editor/translation_ru.json
index 6a8b6efc..256e1c21 100644
--- a/Translation Editor/translation_ru.json	
+++ b/Translation Editor/translation_ru.json	
@@ -275,6 +275,14 @@
 				"долго?"
 			],
 			"desc": "Изменять температуру при длинном нажатии!"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
diff --git a/Translation Editor/translation_sk.json b/Translation Editor/translation_sk.json
index fe2e03af..787dda7e 100644
--- a/Translation Editor/translation_sk.json	
+++ b/Translation Editor/translation_sk.json	
@@ -273,6 +273,14 @@
 				"long?"
 			],
 			"desc": "Temperature change steps on long button press!"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
\ No newline at end of file
diff --git a/Translation Editor/translation_sl.json b/Translation Editor/translation_sl.json
index 6c3ef9a5..f49869a6 100644
--- a/Translation Editor/translation_sl.json	
+++ b/Translation Editor/translation_sl.json	
@@ -274,6 +274,14 @@
 				"long?"
 			],
 			"desc": "Temperature change steps on long button press!"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
\ No newline at end of file
diff --git a/Translation Editor/translation_sr_cyrl.json b/Translation Editor/translation_sr_cyrl.json
index 6497b7a5..e8d0fd9e 100644
--- a/Translation Editor/translation_sr_cyrl.json	
+++ b/Translation Editor/translation_sr_cyrl.json	
@@ -273,6 +273,14 @@
 				"long?"
 			],
 			"desc": "Temperature change steps on long button press!"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
\ No newline at end of file
diff --git a/Translation Editor/translation_sr_latn.json b/Translation Editor/translation_sr_latn.json
index e612cf06..a8a43db3 100644
--- a/Translation Editor/translation_sr_latn.json	
+++ b/Translation Editor/translation_sr_latn.json	
@@ -273,6 +273,14 @@
 				"long?"
 			],
 			"desc": "Temperature change steps on long button press!"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
\ No newline at end of file
diff --git a/Translation Editor/translation_sv.json b/Translation Editor/translation_sv.json
index 6b965a17..8944fe1d 100644
--- a/Translation Editor/translation_sv.json	
+++ b/Translation Editor/translation_sv.json	
@@ -273,6 +273,14 @@
 				"long?"
 			],
 			"desc": "Temperature change steps on long button press!"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
\ No newline at end of file
diff --git a/Translation Editor/translation_tr.json b/Translation Editor/translation_tr.json
index 76e6cce7..4270e733 100644
--- a/Translation Editor/translation_tr.json	
+++ b/Translation Editor/translation_tr.json	
@@ -273,6 +273,14 @@
 				"long?"
 			],
 			"desc": "Temperature change steps on long button press!"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
\ No newline at end of file
diff --git a/Translation Editor/translation_uk.json b/Translation Editor/translation_uk.json
index f072938c..46d418e4 100644
--- a/Translation Editor/translation_uk.json	
+++ b/Translation Editor/translation_uk.json	
@@ -273,6 +273,14 @@
 				"довго?"
 			],
 			"desc": "Змінювати температуру при довгому натисканні!"
+		},
+		"PowerPulsePower":{
+			"text": "POWPLS",
+			"text2": [
+				"Power Pulse",
+				"Watts"
+			],
+			"desc": "Keep awake pulse power intensity"
 		}
 	}
 }
diff --git a/Translation Editor/translations_def.js b/Translation Editor/translations_def.js
index 93646e1f..8c11a4bd 100644
--- a/Translation Editor/translations_def.js	
+++ b/Translation Editor/translations_def.js	
@@ -282,6 +282,11 @@ var def =
 			"id": "TempChangeLongStep",
 			"maxLen": 6,
 			"maxLen2": 16
+		},
+		{
+			"id": "PowerPulsePower",
+			"maxLen": 6,
+			"maxLen2": 16
 		}
 	]
 }
diff --git a/workspace/TS100/Core/Inc/Translation.h b/workspace/TS100/Core/Inc/Translation.h
index e3f5f167..74c01e20 100644
--- a/workspace/TS100/Core/Inc/Translation.h
+++ b/workspace/TS100/Core/Inc/Translation.h
@@ -19,8 +19,8 @@ extern const uint8_t USER_FONT_6x8[];
  * use SettingsShortNames as SettingsShortNames[16][1].. second column undefined
  */
 extern const enum ShortNameType SettingsShortNameType;
-extern const char *SettingsShortNames[26][2];
-extern const char *SettingsDescriptions[26];
+extern const char *SettingsShortNames[27][2];
+extern const char *SettingsDescriptions[27];
 extern const char *SettingsMenuEntries[4];
 
 extern const char *SettingsCalibrationDone;

From 1a671dfbdd9e14727bc084d16913601b12a0e8dc Mon Sep 17 00:00:00 2001
From: "Ben V. Brown" <Ralim@Ralimtek.com>
Date: Fri, 22 May 2020 23:56:43 +1000
Subject: [PATCH 5/8] Update gui.cpp

---
 workspace/TS100/Core/Src/gui.cpp | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/workspace/TS100/Core/Src/gui.cpp b/workspace/TS100/Core/Src/gui.cpp
index 082bfa33..6d8f3f53 100644
--- a/workspace/TS100/Core/Src/gui.cpp
+++ b/workspace/TS100/Core/Src/gui.cpp
@@ -234,7 +234,7 @@ const menuitem advancedMenu[] = {
 		settings_displayCalibrate } }, /*Calibrate tip*/
 { (const char*) SettingsDescriptions[14], { settings_setCalibrateVIN }, {
 		settings_displayCalibrateVIN } }, /*Voltage input cal*/
-{ (const char*) SettingsDescriptions[16], { settings_setPowerPulse }, {
+{ (const char*) SettingsDescriptions[26], { settings_setPowerPulse }, {
 		settings_displayPowerPulse } }, /*Power Pulse adjustment */
 { NULL, { NULL }, { NULL } }  // end of menu marker. DO NOT REMOVE
 };

From 4814ae139352c185db15c4daa8861aa9e0ad64dd Mon Sep 17 00:00:00 2001
From: "Ben V. Brown" <Ralim@Ralimtek.com>
Date: Sat, 23 May 2020 13:42:03 +1000
Subject: [PATCH 6/8] Update main.cpp

---
 workspace/TS100/Core/Src/main.cpp | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/workspace/TS100/Core/Src/main.cpp b/workspace/TS100/Core/Src/main.cpp
index 9aa15ed4..ad952611 100644
--- a/workspace/TS100/Core/Src/main.cpp
+++ b/workspace/TS100/Core/Src/main.cpp
@@ -43,7 +43,6 @@ void startPIDTask(void const *argument);
 void startMOVTask(void const *argument);
 // End FreeRTOS
 
-
 // Main sets up the hardware then hands over to the FreeRTOS kernel
 int main(void) {
 	/* Reset of all peripherals, Initializes the Flash interface and the Systick.
@@ -111,15 +110,9 @@ void startPIDTask(void const *argument __unused) {
 	 * control PWM.
 	 */
 	setTipX10Watts(0); // disable the output driver if the output is set to be off
-
-#ifdef MODEL_TS80
-	//Set power management code to the tip resistance in ohms * 10
-
 	TickType_t lastPowerPulseStart = 0;
 	TickType_t lastPowerPulseEnd = 0;
-#else
 
-#endif
 	history<int32_t, PID_TIM_HZ> tempError = { { 0 }, 0, 0 };
 	currentTempTargetDegC = 0; // Force start with no output (off). If in sleep / soldering this will
 							   // be over-ridden rapidly

From f45fd087ab9b5a2fd153491bf5d71e8d9ab4eab6 Mon Sep 17 00:00:00 2001
From: "Ben V. Brown" <Ralim@Ralimtek.com>
Date: Sat, 23 May 2020 13:59:51 +1000
Subject: [PATCH 7/8] Pull default config out

---
 workspace/TS100/Core/Src/Settings.cpp |  2 +-
 workspace/TS100/Core/Src/gui.cpp      | 31 +++++++++++++--------------
 workspace/TS100/configuration.h       |  5 +++++
 3 files changed, 21 insertions(+), 17 deletions(-)

diff --git a/workspace/TS100/Core/Src/Settings.cpp b/workspace/TS100/Core/Src/Settings.cpp
index 2d0352a0..7f0b84a5 100644
--- a/workspace/TS100/Core/Src/Settings.cpp
+++ b/workspace/TS100/Core/Src/Settings.cpp
@@ -105,6 +105,6 @@ void resetSettings() {
 	systemSettings.ReverseButtonTempChangeEnabled = REVERSE_BUTTON_TEMP_CHANGE; //
 	systemSettings.TempChangeShortStep = TEMP_CHANGE_SHORT_STEP; //
 	systemSettings.TempChangeLongStep = TEMP_CHANGE_LONG_STEP; //
-	systemSettings.KeepAwakePulse= 3;
+	systemSettings.KeepAwakePulse= POWER_PULSE_DEFAULT;
 	saveSettings();  // Save defaults
 }
diff --git a/workspace/TS100/Core/Src/gui.cpp b/workspace/TS100/Core/Src/gui.cpp
index 6d8f3f53..dfa4ebfc 100644
--- a/workspace/TS100/Core/Src/gui.cpp
+++ b/workspace/TS100/Core/Src/gui.cpp
@@ -18,8 +18,8 @@ extern uint32_t lastButtonTime;
 void gui_Menu(const menuitem *menu);
 
 #ifdef MODEL_TS100
-  static void settings_setInputVRange(void);
-  static void settings_displayInputVRange(void);
+static void settings_setInputVRange(void);
+static void settings_displayInputVRange(void);
 #else
 static void settings_setInputPRange(void);
 static void settings_displayInputPRange(void);
@@ -118,14 +118,14 @@ static void settings_enterAdvancedMenu(void);
  *
  */
 const menuitem rootSettingsMenu[] {
-		/*
-		 * Power Source
-		 * Soldering Menu
-		 * Power Saving Menu
-		 * UI Menu
-		 * Advanced Menu
-		 * Exit
-		 */
+/*
+ * Power Source
+ * Soldering Menu
+ * Power Saving Menu
+ * UI Menu
+ * Advanced Menu
+ * Exit
+ */
 #ifdef MODEL_TS100
 		{ (const char*) SettingsDescriptions[0], { settings_setInputVRange }, {
 				settings_displayInputVRange } }, /*Voltage input*/
@@ -786,16 +786,15 @@ static void settings_displayTempChangeLongStep(void) {
 
 static void settings_setPowerPulse(void) {
 	systemSettings.KeepAwakePulse += POWER_PULSE_INCREMENT;
-	if (systemSettings.KeepAwakePulse > POWER_PULSE_MAX) {
-		systemSettings.KeepAwakePulse = POWER_PULSE_MAX;  // loop back to 0
-	}
+	systemSettings.KeepAwakePulse %= POWER_PULSE_MAX;
+
 }
 static void settings_displayPowerPulse(void) {
 	printShortDescription(26, 5);
-	if (systemSettings.TempChangeLongStep) {
-		OLED::printNumber(systemSettings.TempChangeLongStep / 10, 1);
+	if (systemSettings.KeepAwakePulse) {
+		OLED::printNumber(systemSettings.KeepAwakePulse / 10, 1);
 		OLED::print(SymbolDot);
-		OLED::printNumber(systemSettings.TempChangeLongStep % 10, 1);
+		OLED::printNumber(systemSettings.KeepAwakePulse % 10, 1);
 	} else {
 		OLED::drawCheckbox(false);
 	}
diff --git a/workspace/TS100/configuration.h b/workspace/TS100/configuration.h
index 7b75c691..8dc1212f 100644
--- a/workspace/TS100/configuration.h
+++ b/workspace/TS100/configuration.h
@@ -57,6 +57,11 @@
 /* Power pulse for keeping power banks awake*/
 #define POWER_PULSE_INCREMENT 1
 #define POWER_PULSE_MAX 50 // x10 max watts
+#ifdef MODEL_TS100
+#define POWER_PULSE_DEFAULT 0
+#else
+#define POWER_PULSE_DEFAULT 5
+#endif
 /**
  * OLED Orientation Sensitivity on Automatic mode!
  * Motion Sensitivity <0=Off 1=Least Sensitive 9=Most Sensitive>

From ac7d72d2555fc46edd1ca1717b9b92ab6ac0a5f1 Mon Sep 17 00:00:00 2001
From: "Ben V. Brown" <Ralim@Ralimtek.com>
Date: Sat, 23 May 2020 13:59:58 +1000
Subject: [PATCH 8/8] Translation update

---
 Translation Editor/translation_bg.json      | 4 ++--
 Translation Editor/translation_cs.json      | 4 ++--
 Translation Editor/translation_da.json      | 4 ++--
 Translation Editor/translation_de.json      | 4 ++--
 Translation Editor/translation_en.json      | 4 ++--
 Translation Editor/translation_es.json      | 4 ++--
 Translation Editor/translation_fi.json      | 4 ++--
 Translation Editor/translation_fr.json      | 4 ++--
 Translation Editor/translation_hr.json      | 4 ++--
 Translation Editor/translation_hu.json      | 4 ++--
 Translation Editor/translation_it.json      | 4 ++--
 Translation Editor/translation_lt.json      | 4 ++--
 Translation Editor/translation_nl.json      | 4 ++--
 Translation Editor/translation_nl_be.json   | 4 ++--
 Translation Editor/translation_no.json      | 4 ++--
 Translation Editor/translation_pl.json      | 4 ++--
 Translation Editor/translation_pt.json      | 4 ++--
 Translation Editor/translation_ru.json      | 4 ++--
 Translation Editor/translation_sk.json      | 4 ++--
 Translation Editor/translation_sl.json      | 4 ++--
 Translation Editor/translation_sr_cyrl.json | 4 ++--
 Translation Editor/translation_sr_latn.json | 4 ++--
 Translation Editor/translation_sv.json      | 4 ++--
 Translation Editor/translation_tr.json      | 4 ++--
 Translation Editor/translation_uk.json      | 4 ++--
 25 files changed, 50 insertions(+), 50 deletions(-)

diff --git a/Translation Editor/translation_bg.json b/Translation Editor/translation_bg.json
index 35b576ed..5d1c5999 100644
--- a/Translation Editor/translation_bg.json	
+++ b/Translation Editor/translation_bg.json	
@@ -277,8 +277,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_cs.json b/Translation Editor/translation_cs.json
index 2c393be4..c656d8df 100644
--- a/Translation Editor/translation_cs.json	
+++ b/Translation Editor/translation_cs.json	
@@ -278,8 +278,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_da.json b/Translation Editor/translation_da.json
index a0e8b391..7f49b8f1 100644
--- a/Translation Editor/translation_da.json	
+++ b/Translation Editor/translation_da.json	
@@ -277,8 +277,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_de.json b/Translation Editor/translation_de.json
index c14fcda7..f9b8f1fe 100644
--- a/Translation Editor/translation_de.json	
+++ b/Translation Editor/translation_de.json	
@@ -281,8 +281,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_en.json b/Translation Editor/translation_en.json
index f170bc8c..4615b68e 100644
--- a/Translation Editor/translation_en.json	
+++ b/Translation Editor/translation_en.json	
@@ -280,8 +280,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_es.json b/Translation Editor/translation_es.json
index 6171e4b8..8514667e 100644
--- a/Translation Editor/translation_es.json	
+++ b/Translation Editor/translation_es.json	
@@ -279,8 +279,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_fi.json b/Translation Editor/translation_fi.json
index 9f5b37a5..089959d8 100644
--- a/Translation Editor/translation_fi.json	
+++ b/Translation Editor/translation_fi.json	
@@ -277,8 +277,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_fr.json b/Translation Editor/translation_fr.json
index 2cfc8e92..b4e6707b 100644
--- a/Translation Editor/translation_fr.json	
+++ b/Translation Editor/translation_fr.json	
@@ -277,8 +277,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_hr.json b/Translation Editor/translation_hr.json
index bf7c0c29..e4dbf726 100644
--- a/Translation Editor/translation_hr.json	
+++ b/Translation Editor/translation_hr.json	
@@ -277,8 +277,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_hu.json b/Translation Editor/translation_hu.json
index 5f09dead..89e88663 100644
--- a/Translation Editor/translation_hu.json	
+++ b/Translation Editor/translation_hu.json	
@@ -277,8 +277,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_it.json b/Translation Editor/translation_it.json
index 80c97f31..5793cb1c 100644
--- a/Translation Editor/translation_it.json	
+++ b/Translation Editor/translation_it.json	
@@ -279,8 +279,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_lt.json b/Translation Editor/translation_lt.json
index 929ea2b9..38608dab 100644
--- a/Translation Editor/translation_lt.json	
+++ b/Translation Editor/translation_lt.json	
@@ -277,8 +277,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_nl.json b/Translation Editor/translation_nl.json
index 8af5ab72..afb7ea31 100644
--- a/Translation Editor/translation_nl.json	
+++ b/Translation Editor/translation_nl.json	
@@ -277,8 +277,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_nl_be.json b/Translation Editor/translation_nl_be.json
index 93f16df4..c79e34fb 100644
--- a/Translation Editor/translation_nl_be.json	
+++ b/Translation Editor/translation_nl_be.json	
@@ -277,8 +277,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_no.json b/Translation Editor/translation_no.json
index e788aa16..8b8fad56 100644
--- a/Translation Editor/translation_no.json	
+++ b/Translation Editor/translation_no.json	
@@ -277,8 +277,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_pl.json b/Translation Editor/translation_pl.json
index 97d5fe64..acad6316 100644
--- a/Translation Editor/translation_pl.json	
+++ b/Translation Editor/translation_pl.json	
@@ -277,8 +277,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_pt.json b/Translation Editor/translation_pt.json
index 5f7c83a8..c0d43e86 100644
--- a/Translation Editor/translation_pt.json	
+++ b/Translation Editor/translation_pt.json	
@@ -277,8 +277,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_ru.json b/Translation Editor/translation_ru.json
index 256e1c21..0e42de30 100644
--- a/Translation Editor/translation_ru.json	
+++ b/Translation Editor/translation_ru.json	
@@ -279,8 +279,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_sk.json b/Translation Editor/translation_sk.json
index 787dda7e..2eb45bf6 100644
--- a/Translation Editor/translation_sk.json	
+++ b/Translation Editor/translation_sk.json	
@@ -277,8 +277,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_sl.json b/Translation Editor/translation_sl.json
index f49869a6..87b8ef40 100644
--- a/Translation Editor/translation_sl.json	
+++ b/Translation Editor/translation_sl.json	
@@ -278,8 +278,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_sr_cyrl.json b/Translation Editor/translation_sr_cyrl.json
index e8d0fd9e..000d3882 100644
--- a/Translation Editor/translation_sr_cyrl.json	
+++ b/Translation Editor/translation_sr_cyrl.json	
@@ -277,8 +277,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_sr_latn.json b/Translation Editor/translation_sr_latn.json
index a8a43db3..cc1009ea 100644
--- a/Translation Editor/translation_sr_latn.json	
+++ b/Translation Editor/translation_sr_latn.json	
@@ -277,8 +277,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_sv.json b/Translation Editor/translation_sv.json
index 8944fe1d..7af2ab00 100644
--- a/Translation Editor/translation_sv.json	
+++ b/Translation Editor/translation_sv.json	
@@ -277,8 +277,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_tr.json b/Translation Editor/translation_tr.json
index 4270e733..9c818c1d 100644
--- a/Translation Editor/translation_tr.json	
+++ b/Translation Editor/translation_tr.json	
@@ -277,8 +277,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}
diff --git a/Translation Editor/translation_uk.json b/Translation Editor/translation_uk.json
index 46d418e4..9f9bbf98 100644
--- a/Translation Editor/translation_uk.json	
+++ b/Translation Editor/translation_uk.json	
@@ -277,8 +277,8 @@
 		"PowerPulsePower":{
 			"text": "POWPLS",
 			"text2": [
-				"Power Pulse",
-				"Watts"
+				"Power",
+				"Pulse W"
 			],
 			"desc": "Keep awake pulse power intensity"
 		}