sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity

Update menu.md

Browse Source
This commit is contained in:
Ben V. Brown
2020-06-02 22:32:44 +10:00
parent 7518a2fe7d
commit b3507218ad
1 changed files with 1 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
menu.md
View File

@@ -1,5 +1,6 @@
# Menu System # Menu System
In this firmware for these soldering irons, all settings are adjustable on the device itself. This means you do **not** require a computer to change any settings.
## Soldering mode ## Soldering mode
@@ -24,7 +25,6 @@ Scrolling through the submenu will return you back to its entry location after y
Due to the tolerance on the resistors used for the input voltage divider, some irons can be up to 0.6V out on the voltage measurement. Due to the tolerance on the resistors used for the input voltage divider, some irons can be up to 0.6V out on the voltage measurement.
Please calibrate your iron if you have any issues with the cutoff voltage. Please calibrate your iron if you have any issues with the cutoff voltage.
Note that cutoff messages can also be triggered by using a power supply that is too weak and fails under the load of the iron. Note that cutoff messages can also be triggered by using a power supply that is too weak and fails under the load of the iron.
This is more critical than before with the new cell count based cutout voltage.
To calibrate your iron: To calibrate your iron: