diff --git a/Translations/translation_EN.json b/Translations/translation_EN.json
index 93e7a35e..bd38d1b4 100644
--- a/Translations/translation_EN.json
+++ b/Translations/translation_EN.json
@@ -1,345 +1,341 @@
 {
-	"languageCode": "EN",
-	"languageLocalName": "English",
-	"fonts": [
-		"ascii_basic",
-		"latin_extended"
-	],
-	"tempUnitFahrenheit": true,
-	"messages": {
-		"SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
-		"CJCCalibrating": "calibrating",
-		"SettingsResetWarning": "Are you sure you want to restore default settings?",
-		"UVLOWarningString": "DC LOW",
-		"UndervoltageString": "Undervoltage",
-		"InputVoltageString": "Input V: ",
-		"SleepingSimpleString": "Zzzz",
-		"SleepingAdvancedString": "Sleeping...",
-		"SleepingTipAdvancedString": "Tip:",
-		"OffString": "Off",
-		"DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"
-	},
-	"messagesWarn": {
-		"CJCCalibrationDone": [
-			"Calibration",
-			"done!"
-		],
-		"ResetOKMessage": "Reset OK",
-		"SettingsResetMessage": [
-			"Certain settings",
-			"were changed!"
-		],
-		"NoAccelerometerMessage": [
-			"No accelerometer",
-			"detected!"
-		],
-		"NoPowerDeliveryMessage": [
-			"No USB-PD IC",
-			"detected!"
-		],
-		"LockingKeysString": "LOCKED",
-		"UnlockingKeysString": "UNLOCKED",
-		"WarningKeysLockedString": "!LOCKED!",
-		"WarningThermalRunaway": [
-			"Thermal",
-			"Runaway"
-		]
-	},
-	"characters": {
-		"SettingRightChar": "R",
-		"SettingLeftChar": "L",
-		"SettingAutoChar": "A",
-		"SettingOffChar": "O",
-		"SettingSlowChar": "S",
-		"SettingMediumChar": "M",
-		"SettingFastChar": "F",
-		"SettingStartNoneChar": "O",
-		"SettingStartSolderingChar": "S",
-		"SettingStartSleepChar": "Z",
-		"SettingStartSleepOffChar": "R",
-		"SettingSensitivityOff": "O",
-		"SettingSensitivityLow": "L",
-		"SettingSensitivityMedium": "M",
-		"SettingSensitivityHigh": "H",
-		"SettingLockDisableChar": "D",
-		"SettingLockBoostChar": "B",
-		"SettingLockFullChar": "F"
-	},
-	"menuGroups": {
-		"PowerMenu": {
-			"text2": [
-				"Power",
-				"settings"
-			],
-			"desc": ""
-		},
-		"SolderingMenu": {
-			"text2": [
-				"Soldering",
-				"settings"
-			],
-			"desc": ""
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Sleep",
-				"mode"
-			],
-			"desc": ""
-		},
-		"UIMenu": {
-			"text2": [
-				"User",
-				"interface"
-			],
-			"desc": ""
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Advanced",
-				"settings"
-			],
-			"desc": ""
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"Power",
-				"source"
-			],
-			"desc": "Set cutoff voltage to prevent battery overdrainage (DC 10V) (S=3.3V per cell, disable PWR limit)"
-		},
-		"MinVolCell": {
-			"text2": [
-				"Minimum",
-				"voltage"
-			],
-			"desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"QC",
-				"voltage"
-			],
-			"desc": "Max QC voltage the iron should negotiate for"
-		},
-		"PDNegTimeout": {
-			"text2": [
-				"PD",
-				"timeout"
-			],
-			"desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"Boost",
-				"temp"
-			],
-			"desc": "Tip temperature used in \"boost mode\""
-		},
-		"AutoStart": {
-			"text2": [
-				"Start-up",
-				"behavior"
-			],
-			"desc": "O=off | S=heat to soldering temp | Z=standby at sleep temp until moved | R=standby without heating until moved"
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Temp change",
-				"short"
-			],
-			"desc": "Temperature-change-increment on short button press"
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Temp change",
-				"long"
-			],
-			"desc": "Temperature-change-increment on long button press"
-		},
-		"LockingMode": {
-			"text2": [
-				"Allow locking",
-				"buttons"
-			],
-			"desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"Motion",
-				"sensitivity"
-			],
-			"desc": "0=off | 1=least sensitive | ... | 9=most sensitive"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"Sleep",
-				"temp"
-			],
-			"desc": "Tip temperature while in \"sleep mode\""
-		},
-		"SleepTimeout": {
-			"text2": [
-				"Sleep",
-				"timeout"
-			],
-			"desc": "Interval before \"sleep mode\" starts (s=seconds | m=minutes)"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"Shutdown",
-				"timeout"
-			],
-			"desc": "Interval before the iron shuts down (m=minutes)"
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Hall sensor",
-				"sensitivity"
-			],
-			"desc": "Sensitivity to magnets (0=off | 1=least sensitive | ... | 9=most sensitive)"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"Temperature",
-				"unit"
-			],
-			"desc": "C=°Celsius | F=°Fahrenheit"
-		},
-		"DisplayRotation": {
-			"text2": [
-				"Display",
-				"orientation"
-			],
-			"desc": "R=right-handed | L=left-handed | A=automatic"
-		},
-		"CooldownBlink": {
-			"text2": [
-				"Cooldown",
-				"flashing"
-			],
-			"desc": "Flash temp reading at idle while tip is hot"
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"Scrolling",
-				"speed"
-			],
-			"desc": "Speed info text scrolls past at (S=slow | F=fast)"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Swap",
-				"+ - keys"
-			],
-			"desc": "Reverse assignment of buttons for temperature adjustment"
-		},
-		"AnimSpeed": {
-			"text2": [
-				"Anim.",
-				"speed"
-			],
-			"desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
-		},
-		"AnimLoop": {
-			"text2": [
-				"Anim.",
-				"loop"
-			],
-			"desc": "Loop icon animations in main menu"
-		},
-		"Brightness": {
-			"text2": [
-				"Screen",
-				"brightness"
-			],
-			"desc": "Adjust the OLED screen brightness"
-		},
-		"ColourInversion": {
-			"text2": [
-				"Invert",
-				"screen"
-			],
-			"desc": "Invert the OLED screen colors"
-		},
-		"LOGOTime": {
-			"text2": [
-				"Boot logo",
-				"duration"
-			],
-			"desc": "Set boot logo duration (s=seconds)"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"Detailed",
-				"idle screen"
-			],
-			"desc": "Display detailed info in a smaller font on idle screen"
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"Detailed",
-				"solder screen"
-			],
-			"desc": "Display detailed info in a smaller font on soldering screen"
-		},
-		"PowerLimit": {
-			"text2": [
-				"Power",
-				"limit"
-			],
-			"desc": "Maximum power the iron can use (W=watt)"
-		},
-		"CalibrateCJC": {
-			"text2": [
-				"Calibrate CJC",
-				"at next boot"
-			],
-			"desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"Calibrate",
-				"input voltage"
-			],
-			"desc": "Start VIN calibration (long press to exit)"
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Power",
-				"pulse"
-			],
-			"desc": "Intensity of power of keep-awake-pulse (watt)"
-		},
-		"PowerPulseWait": {
-			"text2": [
-				"Power pulse",
-				"delay"
-			],
-			"desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
-		},
-		"PowerPulseDuration": {
-			"text2": [
-				"Power pulse",
-				"duration"
-			],
-			"desc": "Keep-awake-pulse duration (x 250ms)"
-		},
-		"SettingsReset": {
-			"text2": [
-				"Restore default",
-				"settings"
-			],
-			"desc": "Reset all settings to default"
-		},
-		"LanguageSwitch": {
-			"text2": [
-				"Language:",
-				" EN     English"
-			],
-			"desc": ""
-		}
-	}
-}
+    "languageCode": "EN",
+    "languageLocalName": "English",
+    "tempUnitFahrenheit": true,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "Are you sure you want to restore default settings?",
+        "UVLOWarningString": "DC LOW",
+        "UndervoltageString": "Undervoltage",
+        "InputVoltageString": "Input V: ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "Sleeping...",
+        "SleepingTipAdvancedString": "Tip:",
+        "OffString": "Off",
+        "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Reset OK",
+        "SettingsResetMessage": [
+            "Certain settings",
+            "were changed!"
+        ],
+        "NoAccelerometerMessage": [
+            "No accelerometer",
+            "detected!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "No USB-PD IC",
+            "detected!"
+        ],
+        "LockingKeysString": "LOCKED",
+        "UnlockingKeysString": "UNLOCKED",
+        "WarningKeysLockedString": "!LOCKED!",
+        "WarningThermalRunaway": [
+            "Thermal",
+            "Runaway"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "R",
+        "SettingLeftChar": "L",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "O",
+        "SettingSlowChar": "S",
+        "SettingMediumChar": "M",
+        "SettingFastChar": "F",
+        "SettingStartNoneChar": "O",
+        "SettingStartSolderingChar": "S",
+        "SettingStartSleepChar": "Z",
+        "SettingStartSleepOffChar": "R",
+        "SettingSensitivityOff": "O",
+        "SettingSensitivityLow": "L",
+        "SettingSensitivityMedium": "M",
+        "SettingSensitivityHigh": "H",
+        "SettingLockDisableChar": "D",
+        "SettingLockBoostChar": "B",
+        "SettingLockFullChar": "F"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Power",
+                "settings"
+            ],
+            "desc": "Settings for Power Supply (Batteries, Quick Charge, PD etc)"
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Soldering",
+                "settings"
+            ],
+            "desc": "Soldering settings, boost modes; how the iron operates"
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Sleep",
+                "mode"
+            ],
+            "desc": "Sleep modes; methods we use to save power on the device by shutting down"
+        },
+        "UIMenu": {
+            "text2": [
+                "User",
+                "interface"
+            ],
+            "desc": "User interactions (how it looks, animations, units etc)"
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Advanced",
+                "settings"
+            ],
+            "desc": "Advanced or Misc options."
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Power",
+                "source"
+            ],
+            "desc": "Set cutoff voltage to prevent battery overdrainage (DC 10V) (S=3.3V per cell, disable PWR limit)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Minimum",
+                "voltage"
+            ],
+            "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "QC",
+                "voltage"
+            ],
+            "desc": "Max QC voltage the iron should negotiate for"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "timeout"
+            ],
+            "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Boost",
+                "temp"
+            ],
+            "desc": "Tip temperature used in \"boost mode\""
+        },
+        "AutoStart": {
+            "text2": [
+                "Start-up",
+                "behavior"
+            ],
+            "desc": "O=off | S=heat to soldering temp | Z=standby at sleep temp until moved | R=standby without heating until moved"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Temp change",
+                "short"
+            ],
+            "desc": "Temperature-change-increment on short button press"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Temp change",
+                "long"
+            ],
+            "desc": "Temperature-change-increment on long button press"
+        },
+        "LockingMode": {
+            "text2": [
+                "Allow locking",
+                "buttons"
+            ],
+            "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Motion",
+                "sensitivity"
+            ],
+            "desc": "0=off | 1=least sensitive | ... | 9=most sensitive"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Sleep",
+                "temp"
+            ],
+            "desc": "Tip temperature while in \"sleep mode\""
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Sleep",
+                "timeout"
+            ],
+            "desc": "Interval before \"sleep mode\" starts (s=seconds | m=minutes)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Shutdown",
+                "timeout"
+            ],
+            "desc": "Interval before the iron shuts down (m=minutes)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Hall sensor",
+                "sensitivity"
+            ],
+            "desc": "Sensitivity to magnets (0=off | 1=least sensitive | ... | 9=most sensitive)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Temperature",
+                "unit"
+            ],
+            "desc": "C=°Celsius | F=°Fahrenheit"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Display",
+                "orientation"
+            ],
+            "desc": "R=right-handed | L=left-handed | A=automatic"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Cooldown",
+                "flashing"
+            ],
+            "desc": "Flash temp reading at idle while tip is hot"
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Scrolling",
+                "speed"
+            ],
+            "desc": "Speed info text scrolls past at (S=slow | F=fast)"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Swap",
+                "+ - keys"
+            ],
+            "desc": "Reverse assignment of buttons for temperature adjustment"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Anim.",
+                "speed"
+            ],
+            "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Anim.",
+                "loop"
+            ],
+            "desc": "Loop icon animations in main menu"
+        },
+        "Brightness": {
+            "text2": [
+                "Screen",
+                "brightness"
+            ],
+            "desc": "Adjust the OLED screen brightness"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Invert",
+                "screen"
+            ],
+            "desc": "Invert the OLED screen colors"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Boot logo",
+                "duration"
+            ],
+            "desc": "Set boot logo duration (s=seconds)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Detailed",
+                "idle screen"
+            ],
+            "desc": "Display detailed info in a smaller font on idle screen"
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Detailed",
+                "solder screen"
+            ],
+            "desc": "Display detailed info in a smaller font on soldering screen"
+        },
+        "PowerLimit": {
+            "text2": [
+                "Power",
+                "limit"
+            ],
+            "desc": "Maximum power the iron can use (W=watt)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Calibrate CJC",
+                "at next boot"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Calibrate",
+                "input voltage"
+            ],
+            "desc": "Start VIN calibration (long press to exit)"
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Power",
+                "pulse"
+            ],
+            "desc": "Intensity of power of keep-awake-pulse (watt)"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Power pulse",
+                "delay"
+            ],
+            "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Power pulse",
+                "duration"
+            ],
+            "desc": "Keep-awake-pulse duration (x 250ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Restore default",
+                "settings"
+            ],
+            "desc": "Reset all settings to default"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Language:",
+                " EN     English"
+            ],
+            "desc": "Toggle active language"
+        }
+    }
+}
\ No newline at end of file