sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity

ADC IRQ's

Browse Source
This commit is contained in:
Ben V. Brown
2021-04-26 22:27:50 +10:00
parent e84717765a
commit 9b15e68859
3 changed files with 12 additions and 51 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
source/Core/BSP/MHP30/IRQ.cpp
View File

@@ -14,7 +14,8 @@
* readings coming in Once these have come in we can unblock the PID so that it
* runs again
*/
void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef *hadc) {
void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef *hadc) {
BaseType_t xHigherPriorityTaskWoken = pdFALSE;
if (hadc == &hadc1) {
if (pidTaskNotification) {

2
source/Core/BSP/MHP30/IRQ.h
View File

@@ -17,7 +17,7 @@
#ifdef __cplusplus
extern "C" {
#endif
void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef *hadc);
void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef *hadc);
void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);

58
source/Core/BSP/MHP30/Setup.c
View File

@@ -17,7 +17,7 @@ DMA_HandleTypeDef hdma_i2c1_tx;
IWDG_HandleTypeDef hiwdg;
TIM_HandleTypeDef htim2;
TIM_HandleTypeDef htim3;
#define ADC_CHANNELS 2
#define ADC_CHANNELS 3
#define ADC_SAMPLES 16
uint32_t ADCReadings[ADC_SAMPLES * ADC_CHANNELS]; // room for 32 lots of the pair of readings
@@ -51,7 +51,7 @@ void Setup_HAL() {
HAL_ADCEx_InjectedStart(&hadc2); // enable injected readings
}
// channel 0 -> temperature sensor, 1-> VIN
// channel 0 -> temperature sensor, 1-> VIN, 2-> tip
uint16_t getADC(uint8_t channel) {
uint32_t sum = 0;
for (uint8_t i = 0; i < ADC_SAMPLES; i++) {
@@ -115,7 +115,6 @@ static void MX_ADC1_Init(void) {
ADC_MultiModeTypeDef multimode;
ADC_ChannelConfTypeDef sConfig;
ADC_InjectionConfTypeDef sConfigInjected;
/**Common config
*/
hadc1.Instance = ADC1;
@@ -144,33 +143,11 @@ static void MX_ADC1_Init(void) {
sConfig.Channel = VIN_ADC1_CHANNEL;
sConfig.Rank = ADC_REGULAR_RANK_2;
HAL_ADC_ConfigChannel(&hadc1, &sConfig);
sConfig.Channel = TIP_TEMP_ADC1_CHANNEL;
sConfig.Rank = ADC_REGULAR_RANK_2;
HAL_ADC_ConfigChannel(&hadc1, &sConfig);
/**Configure Injected Channel
*/
// F in = 10.66 MHz
/*
* Injected time is 1 delay clock + (12 adc cycles*4)+4*sampletime =~217
* clocks = 0.2ms Charge time is 0.016 uS ideally So Sampling time must be >=
* 0.016uS 1/10.66MHz is 0.09uS, so 1 CLK is *should* be enough
* */
sConfigInjected.InjectedChannel = TIP_TEMP_ADC1_CHANNEL;
sConfigInjected.InjectedRank = 1;
sConfigInjected.InjectedNbrOfConversion = 4;
sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_1CYCLE_5;
sConfigInjected.ExternalTrigInjecConv = ADC_EXTERNALTRIGINJECCONV_T2_CC1;
sConfigInjected.AutoInjectedConv = DISABLE;
sConfigInjected.InjectedDiscontinuousConvMode = DISABLE;
sConfigInjected.InjectedOffset = 0;
HAL_ADCEx_InjectedConfigChannel(&hadc1, &sConfigInjected);
sConfigInjected.InjectedRank = 2;
HAL_ADCEx_InjectedConfigChannel(&hadc1, &sConfigInjected);
sConfigInjected.InjectedRank = 3;
HAL_ADCEx_InjectedConfigChannel(&hadc1, &sConfigInjected);
sConfigInjected.InjectedRank = 4;
HAL_ADCEx_InjectedConfigChannel(&hadc1, &sConfigInjected);
SET_BIT(hadc1.Instance->CR1, (ADC_CR1_JEOCIE)); // Enable end of injected conv irq
SET_BIT(hadc1.Instance->CR1, (ADC_CR1_EOSIE)); // Enable end of Normal
// Run ADC internal calibration
while (HAL_ADCEx_Calibration_Start(&hadc1) != HAL_OK)
;
@@ -179,7 +156,6 @@ static void MX_ADC1_Init(void) {
/* ADC2 init function */
static void MX_ADC2_Init(void) {
ADC_ChannelConfTypeDef sConfig;
ADC_InjectionConfTypeDef sConfigInjected;
/**Common config
*/
@@ -202,25 +178,9 @@ static void MX_ADC2_Init(void) {
sConfig.Channel = VIN_ADC2_CHANNEL;
sConfig.Rank = ADC_REGULAR_RANK_2;
HAL_ADC_ConfigChannel(&hadc2, &sConfig);
/**Configure Injected Channel
*/
sConfigInjected.InjectedChannel = TIP_TEMP_ADC2_CHANNEL;
sConfigInjected.InjectedRank = ADC_INJECTED_RANK_1;
sConfigInjected.InjectedNbrOfConversion = 4;
sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_1CYCLE_5;
sConfigInjected.ExternalTrigInjecConv = ADC_EXTERNALTRIGINJECCONV_T2_CC1;
sConfigInjected.AutoInjectedConv = DISABLE;
sConfigInjected.InjectedDiscontinuousConvMode = DISABLE;
sConfigInjected.InjectedOffset = 0;
HAL_ADCEx_InjectedConfigChannel(&hadc2, &sConfigInjected);
sConfigInjected.InjectedRank = ADC_INJECTED_RANK_2;
HAL_ADCEx_InjectedConfigChannel(&hadc2, &sConfigInjected);
sConfigInjected.InjectedRank = ADC_INJECTED_RANK_3;
HAL_ADCEx_InjectedConfigChannel(&hadc2, &sConfigInjected);
sConfigInjected.InjectedRank = ADC_INJECTED_RANK_4;
HAL_ADCEx_InjectedConfigChannel(&hadc2, &sConfigInjected);
sConfig.Channel = TIP_TEMP_ADC1_CHANNEL;
sConfig.Rank = ADC_REGULAR_RANK_2;
HAL_ADC_ConfigChannel(&hadc1, &sConfig);
// Run ADC internal calibration
while (HAL_ADCEx_Calibration_Start(&hadc2) != HAL_OK)