sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity

Add Danish

Browse Source 
Closes #96
This commit is contained in:
Ben V. Brown
2017-12-12 13:27:50 +11:00
parent 3c2e8765f2
commit 87c2ed4f53
4 changed files with 375 additions and 157 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
workspace/TS100/inc/Translation.h
View File

@@ -34,7 +34,7 @@ extern const char SettingLeftChar;
extern const char SettingAutoChar;
#define LANG_EN
//#define LANG_EN
//#define LANG_RU
//#define LANG_ES
//#define LANG_SE
@@ -43,6 +43,7 @@ extern const char SettingAutoChar;
//#define LANG_DE
//#define LANG_CS_CZ
//#define LANG_TR
//#define LANG_HR
#define LANG_DK
#endif /* TRANSLATION_H_ */

15
workspace/TS100/src/OLED.cpp
View File

@@ -120,14 +120,23 @@ void OLED::drawChar(char c, char PrecursorCommand) {
index = (96 - 32) + (c);
break; //-32 compensate for chars excluded from font C2 section
case 0xC3:
index = (128) + (c);
index = (128-32) + (c);
break;
case 0xD0:
#if defined(LANG_RU) || defined(LANG_UK) || defined(LANG_SR) || defined(LANG_BG) || defined(LANG_MK)
case 0xD0:
index = (192) + (c);
break;
case 0xD1:
case 0xD1:
index = (256) + (c);
break;
#else
case 0xC4:
index = (192) + (c);
break;
case 0xC5:
index = (256) + (c);
break;
#endif
default:
return;

166
workspace/TS100/src/Translation.c
View File

@@ -111,54 +111,61 @@ const char* SettingsLongNames[16] = {
// These are all the help text for all the settings.
// No requirements on spacing or length.
/* Power source (DC or batt) */"Источник питания. Установка напряжения отключения. <DC 10V> <S 3.3 V на батарею>",
/* Sleep temperature */"Температура Сна <С>",
/* Sleep timeout */"Переход в режим Сна <Минуты>",
/* Shutdown timeout */"Переходит в режим ожидания <Минуты>",
/* Sleep temperature */"Температура режима ожидания <С>",
/* Sleep timeout */"Время до перехода в режим ожидания <Минуты>",
/* Shutdown timeout */"Время до отключения <Минуты>",
/* Motion sensitivity level */"Акселерометр <0. Выкл. 1. мин. чувствительный 9. макс. чувствительный>",
/* Temperature in F and C */"В чем измерять температуру",
/* Advanced idle display mode enabled */"Display detailed information in a smaller font on the idle screen.",
/* Display rotation mode */"Ориентация Дисплея <A. Автоматический L. Левая Рука R. Правая Рука>",
/* Boost enabled */"Активация кнопки A для Турбо режима до 450С при пайке ",
/* Boost temperature */"Установка температуры для Турбо режима",
/* Automatic start mode */"Автоматический запуск паяльника при включении питания. T=Нагрев, S= Режим Сна,F=Выкл.",
/* Cooldown blink */"Мигает температура на экране охлаждения, пока жало остается горячим."
/* Temperature calibration enter menu */"Calibrate tip offset.",
/* Settings reset command */"Reset all settings",
/* Calibrate input voltage */"VIN Calibration. Buttons adjust, long press to exit",
/* Advanced soldering screen enabled */"Display detailed information while soldering",
/* Advanced idle display mode enabled */"Показывать детальную информацию маленьким шрифтом на домашнем экране",
/* Display rotation mode */"Ориентация дисплея <A. Автоматический, Л. Левая рука, П. Правая рука>",
/* Boost enabled */"Турбо-режим при удержании кнопки А при пайке ",
/* Boost temperature */"Температура в турбо-режиме",
/* Automatic start mode */"Автоматический запуск паяльника при включении питания. T=Нагрев, S=Режим ожидания,F=Выкл.",
/* Cooldown blink */"Показывать температуру на экране охлаждения, пока жало остается горячим.",
/* Temperature calibration enter menu */"Калибровка термодатчика.",
/* Settings reset command */"Сброс всех настроек.",
/* Calibrate input voltage */"Калибровка напряжения входа. Настройка кнопками, нажать и удержать чтобы завершить.",
/* Advanced soldering screen enabled */"Показывать детальную информацию при пайке.",
};
const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
const char* SleepingAdvancedString = "Sleeping...";// <=17 chars
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
const char* WarningAdvancedString = "WARNING! TIP HOT!";
const char SettingTrueChar = 'T';
const char SettingFalseChar = 'F';
const char* SettingsCalibrationWarning = "Убедитесь, что жало остыло до комнатной температуры, прежде чем продолжать!";
const char* UVLOWarningString = "БАТ РАЗР"; //Fixed width 8 chars
const char* SleepingSimpleString = "Хррр";// Must be <= 4 chars
const char* SleepingAdvancedString = "Ожидание...";// <=17 chars
const char* WarningSimpleString = " АЙ!";//Must be <= 4 chars
const char* WarningAdvancedString = "ОСТОРОЖНО! ГОРЯЧО";
const char SettingTrueChar = '+';
const char SettingFalseChar = '-';
/*
* #TODO change support for multibyte constants here
const char SettingRightChar = 'П';
const char SettingLeftChar = 'Л';
const char SettingAutoChar = 'A';*/
const char SettingRightChar = 'R';
const char SettingLeftChar = 'L';
const char SettingAutoChar = 'A';
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
const char* SettingsShortNames[16][2] = {
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
/* (<= 4) Sleep temperature */{"STMP"},
/* (<= 4) Sleep timeout */{"STME"},
/* (<= 5) Shutdown timeout */{"SHTME"},
/* (<= 6) Motion sensitivity level */{"MSENSE"},
/* (<= 6) Temperature in F and C */{"TMPUNT"},
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
/* (<= 6) Display rotation mode */{"DSPROT"},
/* (<= 6) Boost enabled */{"BOOST"},
/* (<= 4) Boost temperature */{"BTMP"},
/* (<= 6) Automatic start mode */{"ASTART"},
/* (<= 6) Cooldown blink */{"CLBLNK"},
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
/* (<= 8) Settings reset command */{"RESET?"},
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
/* (<= 5) Power source (DC or batt) */{"ИстП "},
/* (<= 4) Sleep temperature */{"Тожд"},
/* (<= 4) Sleep timeout */{"Вожд "},
/* (<= 5) Shutdown timeout */{"Тоткл "},
/* (<= 6) Motion sensitivity level */{"ЧувсДв "},
/* (<= 6) Temperature in F and C */{"ЕдТемп "},
/* (<= 6) Advanced idle display mode enabled */{"ИнфОжд "},
/* (<= 6) Display rotation mode */{"ПовЭкр "},
/* (<= 6) Boost enabled */{"Турбо "},
/* (<= 4) Boost temperature */{"Ттур "},
/* (<= 6) Automatic start mode */{"Астарт"},
/* (<= 6) Cooldown blink */{"Охлажд "},
/* (<= 8) Temperature calibration enter menu */{"КалибрТ"},
/* (<= 8) Settings reset command */{"СБРОС?"},
/* (<= 8) Calibrate input voltage */{"КалибрU?"},
/* (<= 6) Advanced soldering screen enabled */{"ИнфПай "},
};
#endif
@@ -558,30 +565,30 @@ const char* SettingsShortNames[16][2] = {
const char* SettingsLongNames[16] = {
// These are all the help text for all the settings.
// No requirements on spacing or length.
/* Power source (DC or batt) */"Izvor napajanja. Postavlja napon iskljucivanja. <DC 10V> <S 3.3V po celiji>",
/* Power source (DC or batt) */"Izvor napajanja. Postavlja napon isključivanja. <DC 10V> <S 3.3V po ćeliji>",
/* Sleep temperature */"Temperatura spavanja. <C>",
/* Sleep timeout */"Vrijeme spavanja. <Minute/Sekunde>",
/* Shutdown timeout */"Vrijeme gasenja. <Minutes>",
/* Motion sensitivity level */"Osjetljivost prepoznavanja pokreta. <0=Ugaseno, 1=Najmanje osjetljivo, 9=Najosjetljivije>",
/* Shutdown timeout */"Vrijeme gašenja. <Minutes>",
/* Motion sensitivity level */"Osjetljivost prepoznavanja pokreta. <0=Ugašeno, 1=Najmanje osjetljivo, 9=Najosjetljivije>",
/* Temperature in F and C */"Jedinica temperature. <C=Celzij, F=Fahrenheit>",
/* Advanced idle display mode enabled */"Prikazivanje detaljnih informacija manjim fontom tijekom cekanja.",
/* Advanced idle display mode enabled */"Prikazivanje detaljnih informacija manjim fontom tijekom čekanja.",
/* Display rotation mode */"Orijentacija ekrana. <A=Automatski, L=Ljevoruki, D=Desnoruki>",
/* Boost enabled */"Prednji gumb prilikom lemljenja aktivira pojacani (Boost) nacin.",
/* Boost temperature */"Temperatura u pojacanom (Boost) nacinu.",
/* Automatic start mode */"Nacin u kojemu se lemilica pokrece po ukljucivanju napajanja. <+=Lemljenje, S=Spavanje, -=Ugaseno>",
/* Cooldown blink */"Bljeskanje temperature prilikom hladjenja, ako je lemilica vruca.",
/* Temperature calibration enter menu */"Kalibriranje temperature vrha.",
/* Settings reset command */"Vracanje svih postavki.",
/* Calibrate input voltage */"Kalibracija ulaznog napona. Podesavanje gumbima, dugacki pritisak za kraj.",
/* Boost enabled */"Držanjem prednjeg gumba prilikom lemljenja aktivira se pojačani (Boost) način.",
/* Boost temperature */"Temperatura u pojačanom (Boost) načinu.",
/* Automatic start mode */"Početno stanje lemilice po uključivanju napajanja. <+=Lemljenje, S=Spavanje, -=Ugašeno>",
/* Cooldown blink */"Bljeskanje temperature prilikom hlađenja, ako je lemilica vruća.",
/* Temperature calibration enter menu */"Kalibriranje temperature mjeri razliku temperature vška i temperature drške, dok je lemilica hladna.",
/* Settings reset command */"Vraćanje svih postavki.",
/* Calibrate input voltage */"Kalibracija ulaznog napona. Podešavanje gumbima, dugački pritisak za kraj.",
/* Advanced soldering screen enabled */"Prikazivanje detaljnih informacija tijekom lemljenja.",
};
const char* SettingsCalibrationWarning = "Provjerite da je vrh ohladjen na sobnu temperaturu prije nego sto nastavite!";
const char* SettingsCalibrationWarning = "Provjerite da je vršak ohlađen na sobnu temperaturu prije nego što nastavite!";
const char* UVLOWarningString = "NAPON!!!"; //Fixed width 8 chars
const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
const char* SleepingAdvancedString = "Spavanje...";// <=17 chars
const char* WarningSimpleString = "VRUC";//Must be <= 4 chars
const char* WarningAdvancedString = "OPREZ! Vrsak je vruc!";
const char* WarningSimpleString = "VRUĆ";//Must be <= 4 chars
const char* WarningAdvancedString = "OPREZ! Vršak je vruć!";
const char SettingTrueChar = '+';
const char SettingFalseChar = '-';
@@ -778,3 +785,60 @@ const char* SettingsShortNames[16][2] = {
};
#endif
#ifdef LANG_DK
const char* SettingsLongNames[16] =
{
/*These are all the help text for all the settings.*/
/*No requirements on spacing or length*/
"Strømforsyning. Indstil Cutoff Spændingen. <DC 10V <S 3.3V per cell", //Power Source
"Dvale Temperatur <C", //Sleep Temp
"Dvale Timeout <Minutter/Sekunder", //Sleep Timeout
"sluknings Timeout <Minutter", //Shutdown Time
"Bevægelsesfølsomhed <0.Slukket 1.Mindst følsom 9.Mest følsom", //Motion Sensitivity
"Temperatur Enhed <C=Celsius F=Fahrenheit", //Temp Unit
"Vis detialieret information med en mindre skriftstørrelse på standby skærmen.", //Detailed Information
"Skærm Orientering <A. Automatisk V. Venstre Håndet H. Højre Håndet", //Orientation
"Ved tryk på front knap Aktiveres boost-funktionen, 450C tilstand når der loddes", //Boost enable
"Temperatur i \"boost\" mode", //Boost Temp
"Start automatisk med lodning når strøm sættes til. L=Lodning, D= Dvale tilstand,S=Slukket", //Auto start
"Blink temperaturen på skærmen, mens spidsen stadig er varm.", //Cooling Blink
"kalibrere spids temperatur.", //Calibrate Tip
"Gendan alle indstillinger", //Reset Settings
"VIN kalibrering. Knapperne justere, Lang tryk for at gå ud", //VIN Cal
"Vis detialieret information mens der loddes", //ADV SLD
};
const char* SettingsCalibrationWarning =
"Sørg for at loddespidsen er ved stuetemperatur, inden du fortsætter!";
const char* UVLOWarningString = "Lav Volt"; //Fixed width 8 chars
const char* SleepingSimpleString = "Zzzz"; // Must be <= 4 chars
const char* SleepingAdvancedString = "Dvale..."; // <=17 chars
const char* WarningSimpleString = "Varm"; //Must be <= 4 chars
const char* WarningAdvancedString = "ADVARSEL! VARM LODDESPIDS!";
const char SettingTrueChar = 'j';
const char SettingFalseChar = 'N';
const char SettingRightChar = 'H';
const char SettingLeftChar = 'V';
const char SettingAutoChar = 'A';
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
const char* SettingsShortNames[16][2] = {
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
/* (<= 4) Sleep temperature */{"STMP"},
/* (<= 4) Sleep timeout */{"STME"},
/* (<= 5) Shutdown timeout */{"SHTME"},
/* (<= 6) Motion sensitivity level */{"MSENSE"},
/* (<= 6) Temperature in F and C */{"TMPUNT"},
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
/* (<= 6) Display rotation mode */{"DSPROT"},
/* (<= 6) Boost enabled */{"BOOST"},
/* (<= 4) Boost temperature */{"BTMP"},
/* (<= 6) Automatic start mode */{"ASTART"},
/* (<= 6) Cooldown blink */{"CLBLNK"},
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
/* (<= 8) Settings reset command */{"RESET?"},
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
};
#endif