Deployed 4574071f with MkDocs version: 1.4.2
This commit is contained in:
github-actions[bot]
@@ -66,6 +66,8 @@
|
||||
</li>
|
||||
</ul>
|
||||
</li>
|
||||
<li class="toctree-l2"><a class="reference internal" href="#profile-mode-mhp30-only">Profile Mode (MHP30 only)</a>
|
||||
</li>
|
||||
<li class="toctree-l2"><a class="reference internal" href="#settings-menu">Settings Menu</a>
|
||||
</li>
|
||||
</ul>
|
||||
@@ -171,7 +173,7 @@ If your device did not come with IronOS already installed, or if you need to upd
|
||||
<p>This OLED screen features burn-in protection; if no buttons or movement have been detected for a while it will automatically blank the screen to reduce burn-in when the iron is left unattended. Any movement or button press will wake the screen.</p>
|
||||
<h3 id="hidden-extras">Hidden Extras</h3>
|
||||
<p>Additionally to the two icons shown, there are two "hidden" actions that can be performed on this menu.</p>
|
||||
<p>If you press and hold the button near the tip (<code>+/A</code>), this enters the temperature adjustment screen. Normally this is not required; but if you would like to adjust the set temperature <em>before</em> the tip starts to heat, this can be useful.</p>
|
||||
<p>On devices that do not support profile mode, if you press and hold the button near the tip (<code>+/A</code>), this enters the temperature adjustment screen. Normally this is not required; but if you would like to adjust the set temperature <em>before</em> the tip starts to heat, this can be useful.</p>
|
||||
<p>If you press and hold the button near the rear of the iron (<code>-/B</code>), it will take you into the <a href="https://ralim.github.io/IronOS/DebugMenu/">debug menu</a>.</p>
|
||||
<h2 id="soldering-mode">Soldering Mode</h2>
|
||||
<p>When you press the button to enter the soldering mode, the iron will instantly start to heat up the tip.</p>
|
||||
@@ -187,6 +189,20 @@ If your device did not come with IronOS already installed, or if you need to upd
|
||||
<p>Pinecil has an unpopulated footprint (U14) for a hall effect sensor (Si7210-B-00-IV). Adding the sensor and placing a neodymium magnet on the holder stand will trigger Pinecil to sleep after it enters the stand, and Zzzz will appear on-screen. The magnet is positioned on the stand in proximity to the sensor/handle which then activates one of 10 user defined settings (0=off, 1=lowest sensitivity, 9=highest sensitivity). Read the Hall Sensor document for <a href="https://ralim.github.io/IronOS/HallSensor/">details on installation</a>.</p>
|
||||
<h3 id="idle-shutdown">Idle Shutdown</h3>
|
||||
<p>If, after entering sleep mode, the iron still does not see movement for a much longer time (default=10 minutes); it will shut down and return to the home screen.</p>
|
||||
<h2 id="profile-mode-mhp30-only">Profile Mode (MHP30 only)</h2>
|
||||
<p>On devices that support it, a long press on <code>(+/A)</code> takes you into profile mode, which initiates the profile selected in the relevant settings.</p>
|
||||
<p>Profile mode plays out as follows:</p>
|
||||
<ol>
|
||||
<li>Check if the temperature is below 55C. If not, you will get a warning and cannot enter profile mode.</li>
|
||||
<li>Preheat by raising the target temperature to the configured preheat temperature with the configured preheat speed.</li>
|
||||
<li>Wait for the device to reach the preheat temperature.</li>
|
||||
<li>Gradually move the target temperature to the configured end temperature of the first phase over the configured duration. </li>
|
||||
<li>Wait for the device to reach the end temperature. </li>
|
||||
<li>Repeat steps 4 and 5 for the next phases until there are no more phases configured.</li>
|
||||
<li>Cool down by lowering the target temperature to 0 with the configured cooldown speed. </li>
|
||||
<li>Once the temperature is below 55C, sound the buzzer (if available) and exit profile mode. </li>
|
||||
</ol>
|
||||
<p>You can manually exit profile mode manually in the same way as the soldering mode, by pressing and holding the rear button or pressing both buttons at once.</p>
|
||||
<h2 id="settings-menu">Settings Menu</h2>
|
||||
<p>The settings menu is the most evolving aspect of the firmware, so each option is not documented here. However, do not panic, as every menu option has an on-screen description so you don't <em>need</em> to come back here to figure them all out.</p>
|
||||
<p>To navigate the menu, the two buttons act separately.
|
||||
|
||||
@@ -68,6 +68,8 @@
|
||||
<ul class="current">
|
||||
<li class="toctree-l2"><a class="reference internal" href="#soldering-mode">Soldering mode</a>
|
||||
</li>
|
||||
<li class="toctree-l2"><a class="reference internal" href="#profile-mode-mhp30-only">Profile mode (MHP30 only)</a>
|
||||
</li>
|
||||
<li class="toctree-l2"><a class="reference internal" href="#settings-mode">Settings mode</a>
|
||||
<ul>
|
||||
<li class="toctree-l3"><a class="reference internal" href="#calibrating-input-voltage">Calibrating input voltage</a>
|
||||
@@ -144,6 +146,10 @@
|
||||
- Use each button to go up/down in temperature. Pressing both buttons exits the temperature menu (or wait 3 seconds and it will time out).
|
||||
- Pressing both buttons or holding the rear button (<code>-/B</code>) will exit Soldering Mode.
|
||||
- Holding the front button (<code>+/A</code>) will enter <a href="https://ralim.github.io/IronOS/Menu/#boost-mode">Boost mode</a> (if enabled).</p>
|
||||
<h2 id="profile-mode-mhp30-only">Profile mode (MHP30 only)</h2>
|
||||
<p>In this mode, accessible by long pressing <code>(+/A)</code>, the configured profile will be initiated.
|
||||
- You cannot adjust the temperature or enter boost mode.
|
||||
- Pressing both buttons or holding the rear button (<code>-/B</code>) will exit Profile Mode as well.</p>
|
||||
<h2 id="settings-mode">Settings mode</h2>
|
||||
<p>This mode allows you to cycle through all the options and set custom values.
|
||||
The menu is arranged so that the most often used settings are first.</p>
|
||||
|
||||
@@ -311,5 +311,5 @@ When on the main screen and having the tip plugged in, the unit shows a pair of
|
||||
|
||||
<!--
|
||||
MkDocs version : 1.4.2
|
||||
Build Date UTC : 2023-04-21 13:52:18.392578+00:00
|
||||
Build Date UTC : 2023-04-25 20:25:48.663680+00:00
|
||||
-->
|
||||
|
||||
File diff suppressed because one or more lines are too long
40
sitemap.xml
40
sitemap.xml
@@ -2,102 +2,102 @@
|
||||
<urlset xmlns="http://www.sitemaps.org/schemas/sitemap/0.9">
|
||||
<url>
|
||||
<loc>https://ralim.github.io/IronOS/</loc>
|
||||
<lastmod>2023-04-21</lastmod>
|
||||
<lastmod>2023-04-25</lastmod>
|
||||
<changefreq>daily</changefreq>
|
||||
</url>
|
||||
<url>
|
||||
<loc>https://ralim.github.io/IronOS/DebugMenu/</loc>
|
||||
<lastmod>2023-04-21</lastmod>
|
||||
<lastmod>2023-04-25</lastmod>
|
||||
<changefreq>daily</changefreq>
|
||||
</url>
|
||||
<url>
|
||||
<loc>https://ralim.github.io/IronOS/Development/</loc>
|
||||
<lastmod>2023-04-21</lastmod>
|
||||
<lastmod>2023-04-25</lastmod>
|
||||
<changefreq>daily</changefreq>
|
||||
</url>
|
||||
<url>
|
||||
<loc>https://ralim.github.io/IronOS/GettingStarted/</loc>
|
||||
<lastmod>2023-04-21</lastmod>
|
||||
<lastmod>2023-04-25</lastmod>
|
||||
<changefreq>daily</changefreq>
|
||||
</url>
|
||||
<url>
|
||||
<loc>https://ralim.github.io/IronOS/HallSensor/</loc>
|
||||
<lastmod>2023-04-21</lastmod>
|
||||
<lastmod>2023-04-25</lastmod>
|
||||
<changefreq>daily</changefreq>
|
||||
</url>
|
||||
<url>
|
||||
<loc>https://ralim.github.io/IronOS/Hardware/</loc>
|
||||
<lastmod>2023-04-21</lastmod>
|
||||
<lastmod>2023-04-25</lastmod>
|
||||
<changefreq>daily</changefreq>
|
||||
</url>
|
||||
<url>
|
||||
<loc>https://ralim.github.io/IronOS/HardwareIssues/</loc>
|
||||
<lastmod>2023-04-21</lastmod>
|
||||
<lastmod>2023-04-25</lastmod>
|
||||
<changefreq>daily</changefreq>
|
||||
</url>
|
||||
<url>
|
||||
<loc>https://ralim.github.io/IronOS/History/</loc>
|
||||
<lastmod>2023-04-21</lastmod>
|
||||
<lastmod>2023-04-25</lastmod>
|
||||
<changefreq>daily</changefreq>
|
||||
</url>
|
||||
<url>
|
||||
<loc>https://ralim.github.io/IronOS/Logo/</loc>
|
||||
<lastmod>2023-04-21</lastmod>
|
||||
<lastmod>2023-04-25</lastmod>
|
||||
<changefreq>daily</changefreq>
|
||||
</url>
|
||||
<url>
|
||||
<loc>https://ralim.github.io/IronOS/Menu/</loc>
|
||||
<lastmod>2023-04-21</lastmod>
|
||||
<lastmod>2023-04-25</lastmod>
|
||||
<changefreq>daily</changefreq>
|
||||
</url>
|
||||
<url>
|
||||
<loc>https://ralim.github.io/IronOS/Power/</loc>
|
||||
<lastmod>2023-04-21</lastmod>
|
||||
<lastmod>2023-04-25</lastmod>
|
||||
<changefreq>daily</changefreq>
|
||||
</url>
|
||||
<url>
|
||||
<loc>https://ralim.github.io/IronOS/Settings/</loc>
|
||||
<lastmod>2023-04-21</lastmod>
|
||||
<lastmod>2023-04-25</lastmod>
|
||||
<changefreq>daily</changefreq>
|
||||
</url>
|
||||
<url>
|
||||
<loc>https://ralim.github.io/IronOS/Temperature/</loc>
|
||||
<lastmod>2023-04-21</lastmod>
|
||||
<lastmod>2023-04-25</lastmod>
|
||||
<changefreq>daily</changefreq>
|
||||
</url>
|
||||
<url>
|
||||
<loc>https://ralim.github.io/IronOS/Translation/</loc>
|
||||
<lastmod>2023-04-21</lastmod>
|
||||
<lastmod>2023-04-25</lastmod>
|
||||
<changefreq>daily</changefreq>
|
||||
</url>
|
||||
<url>
|
||||
<loc>https://ralim.github.io/IronOS/Troubleshooting/</loc>
|
||||
<lastmod>2023-04-21</lastmod>
|
||||
<lastmod>2023-04-25</lastmod>
|
||||
<changefreq>daily</changefreq>
|
||||
</url>
|
||||
<url>
|
||||
<loc>https://ralim.github.io/IronOS/Flashing/MHP30/</loc>
|
||||
<lastmod>2023-04-21</lastmod>
|
||||
<lastmod>2023-04-25</lastmod>
|
||||
<changefreq>daily</changefreq>
|
||||
</url>
|
||||
<url>
|
||||
<loc>https://ralim.github.io/IronOS/Flashing/Pinecil%20V1/</loc>
|
||||
<lastmod>2023-04-21</lastmod>
|
||||
<lastmod>2023-04-25</lastmod>
|
||||
<changefreq>daily</changefreq>
|
||||
</url>
|
||||
<url>
|
||||
<loc>https://ralim.github.io/IronOS/Flashing/Pinecil%20V2/</loc>
|
||||
<lastmod>2023-04-21</lastmod>
|
||||
<lastmod>2023-04-25</lastmod>
|
||||
<changefreq>daily</changefreq>
|
||||
</url>
|
||||
<url>
|
||||
<loc>https://ralim.github.io/IronOS/Flashing/TS100/</loc>
|
||||
<lastmod>2023-04-21</lastmod>
|
||||
<lastmod>2023-04-25</lastmod>
|
||||
<changefreq>daily</changefreq>
|
||||
</url>
|
||||
<url>
|
||||
<loc>https://ralim.github.io/IronOS/Flashing/TS80%28P%29/</loc>
|
||||
<lastmod>2023-04-21</lastmod>
|
||||
<lastmod>2023-04-25</lastmod>
|
||||
<changefreq>daily</changefreq>
|
||||
</url>
|
||||
</urlset>
|
||||
BIN
sitemap.xml.gz
BIN
sitemap.xml.gz
Binary file not shown.
Reference in New Issue
Block a user