sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity

TS80 Support Stage 1 (#365)

Browse Source 
* Estimated pinout into the ioc file

* Fix Atollic paths to be somewhat more portable

* Add make command

* Add rough calls to ADC2 [untested]

* Using dual ADC injected modes

* Start both ADCs

* Move some IRQ's to ram exec

* Stabilize PID a bit more

* Add in ideas for tip type selection

* Update peripheral setup to support TS80

* Add tiptype formula / settings struct

* Add function ids to the settings menu

* Rough tip selection

* Rough out new cal routine for simple tips

* Hardware test is fairly close for first pass

* Add Simple calibration case [UNTESTED]

This adds the calibration option that uses boiling water to the calibration menu.

This is untested, and may need gain adjustments before use.

* [Feat] Add some QC testing code

* Typo fix

* Add double button press handler for different rising times

* Add hook for jump to sleep mode

* QC for 9V Works!

* Rough out QC handler, trim out old menu help text thats useless

* QC 9V working... Static all the things (Low on ROM)!

* Static all I2C to save space

* Move QC negotiation into background task so it doesnt block the UI

* Input V display works, tune ADC

* QC 3 steps working

* Start tip R measurements

* Impliment tip resistance

* Fix up the accel position, link in auto QC stages

* Fix tip title

* Tip type settings, Static OLED

* Revert I2C callbacks

* Misc Cleanup

* Better Gain value, need to investiate offset

* Add model warning

* Add TS80 Boot Logo (#367)

* Add TS80 Boot Logo

* Refined

* Moved down by 1px

* Add in power selection 18/24W

* Clean up accelerometer, fix TS100 builds, Fix voltage div cal
This commit is contained in:
Ben V. Brown
2018-10-11 14:44:56 +11:00
committed by GitHub
parent a609d702f5
commit 7d0af3fc4c
34 changed files with 5857 additions and 4735 deletions
Download Patch File Download Diff File Expand all files Collapse all files

59
workspace/TS100/inc/Settings.h
View File

@@ -11,36 +11,45 @@
#define SETTINGS_H_
#include <stdint.h>
#include "stm32f1xx_hal.h"
#define SETTINGSVERSION 0x15 /*Change this if you change the struct below to prevent people getting out of sync*/
#define SETTINGSVERSION \
0x16 /*Change this if you change the struct below to prevent people getting \
out of sync*/
/*
* This struct must be a multiple of 2 bytes as it is saved / restored from flash in uint16_t chunks
* This struct must be a multiple of 2 bytes as it is saved / restored from
* flash in uint16_t chunks
*/
typedef struct {
uint16_t SolderingTemp; //current set point for the iron
uint16_t SleepTemp; //temp to drop to in sleep
uint8_t SleepTime; //minutes timeout to sleep
uint8_t cutoutSetting; // The voltage we cut out at for under voltage
uint8_t OrientationMode:2; //If true we want to invert the display for lefties
uint8_t sensitivity :4; //Sensitivity of accelerometer (5 bits)
uint8_t autoStartMode :2; //Should the unit automatically jump straight into soldering mode when power is applied
uint8_t ShutdownTime; //Time until unit shuts down if left alone
uint8_t boostModeEnabled :1; //Boost mode swaps BUT_A in soldering mode to temporary soldering temp over-ride
uint8_t coolingTempBlink :1; //Should the temperature blink on the cool down screen until its <50C
uint8_t detailedIDLE :1; //Detailed idle screen
uint8_t detailedSoldering :1; //Detailed soldering screens
uint8_t temperatureInF; //Should the temp be in F or C (true is F)
uint8_t descriptionScrollSpeed:1; // Description scroll speed
uint16_t voltageDiv; //Voltage divisor factor
uint16_t BoostTemp; //Boost mode set point for the iron
int16_t CalibrationOffset; //This stores the temperature offset for this tip in the iron.
uint8_t PID_P; //PID P Term
uint8_t PID_I; //PID I Term
uint8_t PID_D; //PID D Term
uint8_t version; //Used to track if a reset is needed on firmware upgrade
uint8_t customTipGain; // Tip gain value if custom tuned, or 0 if using a tipType param
uint16_t SolderingTemp; // current set point for the iron
uint16_t SleepTemp; // temp to drop to in sleep
uint8_t SleepTime; // minutes timeout to sleep
uint8_t cutoutSetting; // The voltage we cut out at for under voltage OR Power level for TS80
uint8_t OrientationMode :2; // If true we want to invert the display for lefties
uint8_t sensitivity :4; // Sensitivity of accelerometer (5 bits)
uint8_t autoStartMode :2; // Should the unit automatically jump straight
// into soldering mode when power is applied
uint8_t ShutdownTime; // Time until unit shuts down if left alone
uint8_t boostModeEnabled :1; // Boost mode swaps BUT_A in soldering mode to
// temporary soldering temp over-ride
uint8_t coolingTempBlink :1; // Should the temperature blink on the cool
// down screen until its <50C
uint8_t detailedIDLE :1; // Detailed idle screen
uint8_t detailedSoldering :1; // Detailed soldering screens
uint8_t temperatureInF; // Should the temp be in F or C (true is F)
uint8_t descriptionScrollSpeed :1; // Description scroll speed
uint16_t voltageDiv; // Voltage divisor factor
uint16_t BoostTemp; // Boost mode set point for the iron
int16_t CalibrationOffset; // This stores the temperature offset for this tip
// in the iron.
uint8_t PID_P; // PID P Term
uint8_t PID_I; // PID I Term
uint8_t PID_D; // PID D Term
uint8_t version; // Used to track if a reset is needed on firmware upgrade
uint8_t customTipGain; // Tip gain value if custom tuned, or 0 if using a
// tipType param
uint8_t tipType;
uint32_t padding; //This is here for in case we are not an even divisor so that nothing gets cut off
uint32_t padding; // This is here for in case we are not an even divisor so
// that nothing gets cut off
} systemSettingsType;
extern volatile systemSettingsType systemSettings;