sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity

Bring in translations for the final 2.0 prep

Browse Source
This commit is contained in:
Ben V. Brown
2017-11-04 15:16:00 +11:00
parent afa8257bce
commit 7cc0fd7c84
3 changed files with 236 additions and 41 deletions
Download Patch File Download Diff File Expand all files Collapse all files

243
workspace/TS100/src/Translation.c
View File

@@ -7,21 +7,56 @@
#include "Translation.h"
#ifdef LANG_EN
const char* SettingsLongNames[16] = {
/*These are all the help text for all the settings.*/
/*No requirements on spacing or length*/
"Power source. Sets cutoff voltage. <DC 10V> <S 3.3V per cell>", //Power Source
"Sleep Temperature <C>", //Sleep Temp
"Sleep Timeout <Minutes/Seconds>", //Sleep Timeout
"Shutdown Timeout <Minutes>", //Shutdown Time
"Motion Sensitivity <0.Off 1.least sensitive 9.most sensitive>", //Motion Sensitivity
"Temperature Unit <C=Celsius F=Fahrenheit>", //Temp Unit
"Display detailed information in a smaller font on the idle screen.", //Detailed Information
"Display Orientation <A. Automatic L. Left Handed R. Right Handed>", //Orientation
"Enable front key enters boost mode 450C mode when soldering", //Boost enable
"Temperature when in \"boost\" mode", //Boost Temp
"Automatically starts the iron into soldering on power up. T=Soldering, S= Sleep mode,F=Off", //Auto start
"Blink the temperature on the cooling screen while the tip is still hot.", //Cooling Blink
"Calibrate tip offset.", //Calibrate Tip
"Reset all settings", //Reset Settings
"VIN Calibration. Buttons adjust, long press to exit", //VIN Cal
"Display detailed information while soldering", //ADV SLD
};
const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
const char* SleepingSimpleString = "Zzzz"; // Must be <= 4 chars
const char* SleepingAdvancedString = "Sleeping..."; // <=17 chars
const char* WarningSimpleString = "HOT!"; //Must be <= 4 chars
const char* WarningAdvancedString = "WARNING! TIP HOT!";
const char SettingTrueChar = 'T';
const char SettingFalseChar = 'F';
const char SettingRightChar = 'R';
const char SettingLeftChar = 'L';
const char SettingAutoChar = 'A';
#endif
#ifdef LANG_RU
const char* SettingsLongNames[16] = {
/*These are all the help text for all the settings.*/
/*No requirements on spacing or length*/
"Power source. Sets cutoff voltage. <DC 10V> <S 3.3V per cell>", //Power Source
"Sleep Temperature <C>",//Sleep Temp
"Sleep Timeout <Minutes/Seconds>",//Sleep Timeout
"Shutdown Timeout <Minutes>",//Shutdown Time
"Motion Sensitivity <0.Off 1.least sensitive 9.most sensitive>",//Motion Sensitivity
"Temperature Unit <C=Celsius F=Fahrenheit>",//Temp Unit
"Источник питания. Установка напряжения отключения. <DC 10V> <S 3.3 V на батарею>", //Cell count
"Температура Сна <С>",//Sleep Temp
"Переход в режим Сна <Минуты>",//Sleep timeout
"Переходит в режим ожидания <Минуты>",//Shutdown timeout
"Акселерометр <0. Выкл. 1. мин. чувствительный 9. макс. чувствительный>",//Sensitivity
"В чем измерять температуру",//Temp Unit
"Display detailed information in a smaller font on the idle screen.",//Detailed Information
"Display Orientation <A. Automatic L. Left Handed R. Right Handed>",//Orientation
"Enable front key enters boost mode 450C mode when soldering",//Boost enable
"Temperature when in \"boost\" mode",//Boost Temp
"Automatically starts the iron into soldering on power up. T=Soldering, S= Sleep mode,F=Off",//Auto start
"Blink the temperature on the cooling screen while the tip is still hot.",//Cooling Blink
"Ориентация Дисплея <A. Автоматический L. Левая Рука R. Правая Рука>",//Orientation
"Активация кнопки A для Турбо режима до 450С при пайке ",//Boost enable
"Установка температуры для Турбо режима",//Boost temp
"Автоматический запуск паяльника при включении питания. T=Нагрев, S= Режим Сна,F=Выкл.",//Auto start
"Мигает температура на экране охлаждения, пока жало остается горячим."//Cooling blink
"Calibrate tip offset.",//Calibrate Tip
"Reset all settings",//Reset Settings
"VIN Calibration. Buttons adjust, long press to exit",//VIN Cal
@@ -41,33 +76,173 @@ const char SettingRightChar = 'R';
const char SettingLeftChar = 'L';
const char SettingAutoChar = 'A';
#endif
#ifdef LANG_RU
#ifdef LANG_ES
const char* SettingsLongNames[16] = {
/*These are all the help text for all the settings.*/
/*No requirements on spacing or length*/
"Источник питания. Установка напряжения отключения. <DC 10V> <S 3.3 V на батарею>", //Cell count
"Температура Сна <С>", //Sleep Temp
"Переход в режим Сна <Минуты>", //Sleep timeout
"Переходит в режим ожидания <Минуты>", //Shutdown timeout
"Акселерометр <0. Выкл. 1. мин. чувствительный 9. макс. чувствительный>", //Sensitivity
"В чем измерять температуру", //Temp Unit
"Display detailed information in a smaller font on the idle screen.", //Detailed Information
"Ориентация Дисплея <A. Автоматический L. Левая Рука R. Правая Рука>", //Orientation
"Активация кнопки A для Турбо режима до 450С при пайке ", //Boost enable
"Установка температуры для Турбо режима", //Boost temp
"Автоматический запуск паяльника при включении питания. T=Нагрев, S= Режим Сна,F=Выкл.", //Auto start
"Мигает температура на экране охлаждения, пока жало остается горячим." //Cooling blink
"Calibrate tip offset.",//Calibrate Tip
"Reset all settings", //Reset Settings
"VIN Calibration. Buttons adjust, long press to exit", //VIN Cal
"Display detailed information while soldering", //ADV SLD
};
/*These are all the help text for all the settings.*/
/*No requirements on spacing or length*/
"Fuente de energía. Ajusta el límite inferior de voltaje. <DC=10V S=3.3V por celda>",
"Temperatura en reposo. <C>",
"Tiempo hasta activar reposo. <Minutos>",
"Tiempo hasta apagado. <Minutos>",
"Sensibilidad del movimiento. <0=Apagado 1=El menos sensible 9=El más sensible>",
"Unidad de temperatura.",
"Display detailed information in a smaller font on the idle screen.", //Detailed Information
"Orientación de la pantalla <A=Automático I=Mano izquierda D=Mano derecha>",
"Activar el botón \"Boost\" en modo soldadura.",
"Temperatura en modo \"Boost\". <C>",
"Iniciar modo soldadura en el encendido. <V=Sí S=Modo reposo F=No>",
"Parpadea la temperatura en el enfriamiento si la punta sigue caliente."
"Calibrate tip offset.",//Calibrate Tip
"Reset all settings",//Reset Settings
"VIN Calibration. Buttons adjust, long press to exit",//VIN Cal
"Display detailed information while soldering",//ADV SLD
};
const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
const char* SleepingSimpleString = "Zzzz"; // Must be <= 4 chars
const char* SleepingAdvancedString = "Sleeping..."; // <=17 chars
const char* WarningSimpleString = "HOT!"; //Must be <= 4 chars
const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
const char* SleepingAdvancedString = "Sleeping...";// <=17 chars
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
const char* WarningAdvancedString = "WARNING! TIP HOT!";
const char SettingTrueChar = 'T';
const char SettingFalseChar = 'F';
const char SettingRightChar = 'R';
const char SettingLeftChar = 'L';
const char SettingAutoChar = 'A';
#endif
#ifdef LANG_SE
const char* SettingsLongNames[16] = {
/*These are all the help text for all the settings.*/
/*No requirements on spacing or length*/
"Источник питания. Установка напряжения отключения. <DC 10V> <S 3.3 V на батарею>", //Cell count
"Температура Сна <С>",//Sleep Temp
"Переход в режим Сна <Минуты>",//Sleep timeout
"Переходит в режим ожидания <Минуты>",//Shutdown timeout
"Акселерометр <0. Выкл. 1. мин. чувствительный 9. макс. чувствительный>",//Sensitivity
"В чем измерять температуру",//Temp Unit
"Display detailed information in a smaller font on the idle screen.",//Detailed Information
"Ориентация Дисплея <A. Автоматический L. Левая Рука R. Правая Рука>",//Orientation
"Активация кнопки A для Турбо режима до 450С при пайке ",//Boost enable
"Установка температуры для Турбо режима",//Boost temp
"Автоматический запуск паяльника при включении питания. T=Нагрев, S= Режим Сна,F=Выкл.",//Auto start
"Мигает температура на экране охлаждения, пока жало остается горячим."//Cooling blink
"Calibrate tip offset.",//Calibrate Tip
"Reset all settings",//Reset Settings
"VIN Calibration. Buttons adjust, long press to exit",//VIN Cal
"Display detailed information while soldering",//ADV SLD
};
const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
const char* SleepingAdvancedString = "Sleeping...";// <=17 chars
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
const char* WarningAdvancedString = "WARNING! TIP HOT!";
const char SettingTrueChar = 'T';
const char SettingFalseChar = 'F';
const char SettingRightChar = 'R';
const char SettingLeftChar = 'L';
const char SettingAutoChar = 'A';
#endif
#ifdef LANG_IT
const char* SettingsLongNames[16] = {
/*These are all the help text for all the settings.*/
/*No requirements on spacing or length*/
"Sorgente di alimentazione. Imposta il limite inferiore di tensione. <DC=10V S=3.3V per cella>",
"Temperatura modalità riposo <C>",
"Timeout per passaggio a modalità riposo <Minuti>",
"Timeout spegnimento <Minuti>",
"Sensibilità al movimento <0=Spento 1=Sensibilità minima 9=Sensibilità massima>",
"Unità di temperatura",
"Display detailed information in a smaller font on the idle screen.", //Detailed Information
"Orientamento del display <A=Automatico S=Sinistrorso D=Destrorso>",
"Il tasto anteriore abilita modalità \"boost\" fino a 450C durante la saldatura",
"Temperatura in modalità \"boost\" <C>",
"Avvia automaticamente il saldatore quando viene alimentato. <S=Modalità saldatura R=Modalità riposo N=Spento>",
"Durante lo spegnimento la temperatura lampeggia sul display finché la punta è calda."
"Calibrate tip offset.",//Calibrate Tip
"Reset all settings",//Reset Settings
"VIN Calibration. Buttons adjust, long press to exit",//VIN Cal
"Display detailed information while soldering",//ADV SLD
};
const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
const char* SleepingAdvancedString = "Sleeping...";// <=17 chars
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
const char* WarningAdvancedString = "WARNING! TIP HOT!";
const char SettingTrueChar = 'T';
const char SettingFalseChar = 'F';
const char SettingRightChar = 'R';
const char SettingLeftChar = 'L';
const char SettingAutoChar = 'A';
#endif
#ifdef LANG_FR
const char* SettingsLongNames[16] = {
/*These are all the help text for all the settings.*/
/*No requirements on spacing or length*/
"Type d\'alimentation. Regle la tension de coupure. <DC=10V S=3.3V par cellules>",
"Temperature en veille. <C>",
"Temps avant mise en veille. <Minutes>",
"Temps avant extinction. <Minutes>",
"Sensibilitee du capteur de mouvement. <0=Inactif 1=Peu sensible 9=Tres sensible>",
"Unitee de temperature.",
"Display detailed information in a smaller font on the idle screen.", //Detailed Information
"Orientation de l\'affichage. <A=Automatique G=Gaucher D=Droitier>",
"Active le mode \"Boost\" 450C sur le bouton de devant pendant la soudure.",
"Temperature du mode \"Boost\". <C>",
"Demarre automatiquement la soudure a l\'allumage. <A=Active, V=Mode Veille, D=Desactive>",
"Fait clignotter la temperature pendant la phase de refroidissement quand la panne est chaude."
"Calibrate tip offset.",//Calibrate Tip
"Reset all settings",//Reset Settings
"VIN Calibration. Buttons adjust, long press to exit",//VIN Cal
"Display detailed information while soldering",//ADV SLD
};
const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
const char* SleepingAdvancedString = "Sleeping...";// <=17 chars
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
const char* WarningAdvancedString = "WARNING! TIP HOT!";
const char SettingTrueChar = 'T';
const char SettingFalseChar = 'F';
const char SettingRightChar = 'R';
const char SettingLeftChar = 'L';
const char SettingAutoChar = 'A';
#endif
#ifdef LANG_DE
const char* SettingsLongNames[16] = {
/*These are all the help text for all the settings.*/
/*No requirements on spacing or length*/
"Stromversorgung. Setzt Abschaltspannung <DC=10V S=3.3V pro Zelle>",
"Ruhetemperatur <C>",
"Ruhemodus nach <Minuten>",
"Abschaltzeit <Minuten>",
"Bewegungsempfindlichkeit <0=Aus 1=Minimal 9=Maximal>",
"Temperatur Einheit",
"Display detailed information in a smaller font on the idle screen.", //Detailed Information
"Anzeigerichtung <A=Auto L=Linkshändig R=Rechtshändig>",
"Fronttaste für Temperaturboost einschalten",
"Temperatur im \"boost\"-Modus <C>",
"Automatischer Start beim Einschalten. <J=Löttemp R=Ruhemodus N=Aus>",
"Temperatur blinkt beim Abkühlen, solange noch heiß."
"Calibrate tip offset.",//Calibrate Tip
"Reset all settings",//Reset Settings
"VIN Calibration. Buttons adjust, long press to exit",//VIN Cal
"Display detailed information while soldering",//ADV SLD
};
const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
const char* SleepingAdvancedString = "Sleeping...";// <=17 chars
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
const char* WarningAdvancedString = "WARNING! TIP HOT!";
const char SettingTrueChar = 'T';