Migrate :O

2019-08-18 22:24:01 +10:00
parent 09ce60f658
commit 7ca613e22b
259 changed files with 116330 additions and 309009 deletions
--- a/workspace/TS100/Core/Src/Settings.cpp
+++ b/workspace/TS100/Core/Src/Settings.cpp
@@ -0,0 +1,121 @@
+/*
+ * Settings.c
+ *
+ *  Created on: 29 Sep 2016
+ *      Author: Ralim
+ *
+ *      This file holds the users settings and saves / restores them to the
+ * devices flash
+ */
+
+#include "Settings.h"
+#include "Setup.h"
+#define FLASH_ADDR \
+  (0x8000000 |     \
+   0xFC00) /*Flash start OR'ed with the maximum amount of flash - 1024 bytes*/
+#include "string.h"
+volatile systemSettingsType systemSettings;
+
+void saveSettings() {
+  // First we erase the flash
+  FLASH_EraseInitTypeDef pEraseInit;
+  pEraseInit.TypeErase = FLASH_TYPEERASE_PAGES;
+  pEraseInit.Banks = FLASH_BANK_1;
+  pEraseInit.NbPages = 1;
+  pEraseInit.PageAddress = FLASH_ADDR;
+  uint32_t failingAddress = 0;
+  HAL_IWDG_Refresh(&hiwdg);
+  __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_WRPERR | FLASH_FLAG_PGERR |
+                         FLASH_FLAG_BSY);
+  HAL_FLASH_Unlock();
+  HAL_Delay(10);
+  HAL_IWDG_Refresh(&hiwdg);
+  HAL_FLASHEx_Erase(&pEraseInit, &failingAddress);
+  //^ Erase the page of flash (1024 bytes on this stm32)
+  // erased the chunk
+  // now we program it
+  uint16_t *data = (uint16_t *)&systemSettings;
+  HAL_FLASH_Unlock();
+
+  for (uint8_t i = 0; i < (sizeof(systemSettingsType) / 2); i++) {
+    HAL_IWDG_Refresh(&hiwdg);
+    HAL_FLASH_Program(FLASH_TYPEPROGRAM_HALFWORD, FLASH_ADDR + (i * 2),
+                      data[i]);
+  }
+  HAL_FLASH_Lock();
+}
+
+void restoreSettings() {
+  // We read the flash
+  uint16_t *data = (uint16_t *)&systemSettings;
+  for (uint8_t i = 0; i < (sizeof(systemSettingsType) / 2); i++) {
+    data[i] = *((uint16_t *)(FLASH_ADDR + (i * 2)));
+  }
+
+  // if the version is correct were done
+  // if not we reset and save
+  if (systemSettings.version != SETTINGSVERSION) {
+    // probably not setup
+    resetSettings();
+  }
+}
+// Lookup function for cutoff setting -> X10 voltage
+/*
+ * 0=DC
+ * 1=3S
+ * 2=4S
+ * 3=5S
+ * 4=6S
+ */
+uint8_t lookupVoltageLevel(uint8_t level) {
+  if (level == 0)
+    return 90;  // 9V since iron does not function effectively below this
+  else
+    return (level * 33) + (33 * 2);
+}
+void resetSettings() {
+  memset((void *)&systemSettings, 0, sizeof(systemSettingsType));
+  systemSettings.SleepTemp =
+      150;  // Temperature the iron sleeps at - default 150.0 C
+  systemSettings.SleepTime = 6;  // How many seconds/minutes we wait until going
+                                 // to sleep - default 1 min
+  systemSettings.SolderingTemp = 320;  // Default soldering temp is 320.0 C
+  systemSettings.cutoutSetting = 0;    // default to no cut-off voltage (or 18W for TS80)
+  systemSettings.version =
+      SETTINGSVERSION;  // Store the version number to allow for easier upgrades
+  systemSettings.detailedSoldering = 0;  // Detailed soldering screen
+  systemSettings.detailedIDLE =
+      0;  // Detailed idle screen (off for first time users)
+  systemSettings.OrientationMode = 2;  // Default to automatic
+  systemSettings.sensitivity = 7;      // Default high sensitivity
+#ifdef MODEL_TS80
+  systemSettings.voltageDiv = 780;  // Default divider from schematic
+
+#else
+  systemSettings.voltageDiv = 467;  // Default divider from schematic
+#endif
+  systemSettings.ShutdownTime =
+      10;  // How many minutes until the unit turns itself off
+  systemSettings.boostModeEnabled =
+      1;  // Default to having boost mode on as most people prefer itF
+  systemSettings.BoostTemp = 420;    // default to 400C
+  systemSettings.autoStartMode = 0;  // Auto start off for safety
+  systemSettings.coolingTempBlink =
+      0;  // Blink the temperature on the cooling screen when its > 50C
+  systemSettings.temperatureInF = 0;          // default to 0
+  systemSettings.descriptionScrollSpeed = 0;  // default to slow
+  systemSettings.PID_P = 42;                  // PID tuning constants
+  systemSettings.PID_I = 50;
+  systemSettings.PID_D = 15;
+  systemSettings.CalibrationOffset = 1400;  // the adc offset
+  systemSettings.customTipGain =
+      0;  // The tip type is either default or a custom gain
+#ifdef MODEL_TS100
+  systemSettings.tipType = TS_B2;  // Default to the B2 Tip
+#endif
+#ifdef MODEL_TS80
+  systemSettings.pidPowerLimit=24;  // Sets the max pwm power limit
+  systemSettings.tipType = TS_B02;  // Default to the B2 Tip
+#endif
+  saveSettings();  // Save defaults
+}