Migrate :O

workspace/TS100/Core/Inc/hardware.h

@@ -0,0 +1,139 @@
+/*
+ * Hardware.h
+ *
+ *  Created on: 29Aug.,2017
+ *      Author: Ben V. Brown
+ */
+
+#ifndef HARDWARE_H_
+#define HARDWARE_H_
+#include "Setup.h"
+#include "stm32f1xx_hal.h"
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+enum Orientation {
+	ORIENTATION_LEFT_HAND = 0, ORIENTATION_RIGHT_HAND = 1, ORIENTATION_FLAT = 3
+};
+
+#if defined(MODEL_TS100) + defined(MODEL_TS80) > 1
+#error "Multiple models defined!"
+#elif defined(MODEL_TS100) + defined(MODEL_TS80) == 0
+#error "No model defined!"
+#endif
+
+#ifdef MODEL_TS100
+
+#define KEY_B_Pin GPIO_PIN_6
+#define KEY_B_GPIO_Port GPIOA
+#define TMP36_INPUT_Pin GPIO_PIN_7
+#define TMP36_INPUT_GPIO_Port GPIOA
+#define TMP36_ADC1_CHANNEL ADC_CHANNEL_7
+#define TIP_TEMP_Pin GPIO_PIN_0
+#define TIP_TEMP_GPIO_Port GPIOB
+#define TIP_TEMP_ADC1_CHANNEL ADC_CHANNEL_8
+#define TIP_TEMP_ADC2_CHANNEL ADC_CHANNEL_8
+#define VIN_Pin GPIO_PIN_1
+#define VIN_GPIO_Port GPIOB
+#define VIN_ADC1_CHANNEL ADC_CHANNEL_9
+#define VIN_ADC2_CHANNEL ADC_CHANNEL_9
+#define OLED_RESET_Pin GPIO_PIN_8
+#define OLED_RESET_GPIO_Port GPIOA
+#define KEY_A_Pin GPIO_PIN_9
+#define KEY_A_GPIO_Port GPIOA
+#define INT_Orientation_Pin GPIO_PIN_3
+#define INT_Orientation_GPIO_Port GPIOB
+#define PWM_Out_Pin GPIO_PIN_4
+#define PWM_Out_GPIO_Port GPIOB
+#define PWM_Out_CHANNEL TIM_CHANNEL_1
+#define PWM_Out_CCR
+#define INT_Movement_Pin GPIO_PIN_5
+#define INT_Movement_GPIO_Port GPIOB
+#define SCL_Pin GPIO_PIN_6
+#define SCL_GPIO_Port GPIOB
+#define SDA_Pin GPIO_PIN_7
+#define SDA_GPIO_Port GPIOB
+
+#else
+// TS80 pin map
+#define KEY_B_Pin GPIO_PIN_0
+#define KEY_B_GPIO_Port GPIOB
+#define TMP36_INPUT_Pin GPIO_PIN_4
+#define TMP36_INPUT_GPIO_Port GPIOA
+#define TMP36_ADC1_CHANNEL ADC_CHANNEL_4
+#define TIP_TEMP_Pin GPIO_PIN_3
+#define TIP_TEMP_GPIO_Port GPIOA
+#define TIP_TEMP_ADC1_CHANNEL ADC_CHANNEL_3
+#define TIP_TEMP_ADC2_CHANNEL ADC_CHANNEL_3
+
+#define VIN_Pin GPIO_PIN_2
+#define VIN_GPIO_Port GPIOA
+#define VIN_ADC1_CHANNEL ADC_CHANNEL_2
+#define VIN_ADC2_CHANNEL ADC_CHANNEL_2
+#define OLED_RESET_Pin GPIO_PIN_15
+#define OLED_RESET_GPIO_Port GPIOA
+#define KEY_A_Pin GPIO_PIN_1
+#define KEY_A_GPIO_Port GPIOB
+#define INT_Orientation_Pin GPIO_PIN_4
+#define INT_Orientation_GPIO_Port GPIOB
+#define PWM_Out_Pin GPIO_PIN_6
+#define PWM_Out_GPIO_Port GPIOA
+#define PWM_Out_CHANNEL TIM_CHANNEL_1
+#define INT_Movement_Pin GPIO_PIN_5
+#define INT_Movement_GPIO_Port GPIOB
+#define SCL_Pin GPIO_PIN_6
+#define SCL_GPIO_Port GPIOB
+#define SDA_Pin GPIO_PIN_7
+#define SDA_GPIO_Port GPIOB
+
+#endif
+
+/*
+ * Keep in a uint8_t range for the ID's
+ */
+#ifdef MODEL_TS100
+enum TipType {
+	TS_B2 = 0,
+	TS_D24 = 1,
+	TS_BC2 = 2,
+	TS_C1 = 3,
+	Tip_MiniWare = 4,
+	HAKKO_BC2 = 4,
+	Tip_Hakko = 5,
+	Tip_Custom = 5,
+};
+#endif
+#ifdef MODEL_TS80
+enum TipType {
+	TS_B02 = 0, TS_D25 = 1, Tip_MiniWare = 2, Tip_Custom = 3,
+};
+#endif
+extern uint16_t tipGainCalValue ;
+
+uint16_t lookupTipDefaultCalValue(enum TipType tipID);
+ uint16_t getHandleTemperature();
+uint16_t getTipRawTemp(uint8_t refresh);
+uint16_t getInputVoltageX10(uint16_t divisor,uint8_t sample);
+
+void setTipPWM(uint8_t pulse);
+uint16_t ctoTipMeasurement(uint16_t temp);
+uint16_t tipMeasurementToC(uint16_t raw);
+uint16_t ftoTipMeasurement(uint16_t temp);
+uint16_t tipMeasurementToF(uint16_t raw);
+void seekQC(int16_t Vx10, uint16_t divisor);
+void setCalibrationOffset(int16_t offSet);
+void setTipType(enum TipType tipType, uint8_t manualCalGain);
+uint32_t calculateTipR();
+int16_t calculateMaxVoltage(uint8_t useHP);
+void startQC(uint16_t divisor); // Tries to negotiate QC for highest voltage, must be run after
+// RToS
+// This will try for 12V, failing that 9V, failing that 5V
+// If input is over 12V returns -1
+// If the input is [5-12] Will return the value.
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HARDWARE_H_ */