Update documentation

Documentation/Flashing.md

@@ -83,9 +83,12 @@ Check the extension of your firmware, it should be `.RDY` now.
 ## Pinecil (Pine64)
 
 The MCU used in the Pinecil supports usb-dfu.
+
 To enter DFU mode, hold the button at the back of the iron while connecting to usb over usb-c.
 Generally all usb controllers work, but some hubs have issues so avoiding hubs may be best.
+
 Once the device is connected while holding the button, the screen will stay **off**.
+
 This is normal, and then you can use the appropriate tool to load the .hex or .bin file as per your OS.
 
 You can also refer to the Pine64 [Wiki](https://wiki.pine64.org/wiki/Pinecil).
@@ -95,22 +98,21 @@ You can also refer to the Pine64 [Wiki](https://wiki.pine64.org/wiki/Pinecil).
 Using `dfu-util` you can flash the firmware using a command line as such:
 
 ```
-dfu-util -d 28e9:0189 -a 0 -D Pinecil_EN.bin -s 0x08000000:mass-erase:force
+dfu-util -D Pinecil_EN.dfu
-```
-
-If this command fails with `dfu-util: Error during special command "MASS_ERASE" get_status`, try this instead:
-
-```
-dfu-util -d 28e9:0189 -a 0 -D Pinecil_EN.bin -s 0x08000000
 ```
 
 ### Windows
 
 For windows the easiest tool to use is the vendors gui tool from [here](http://www.gd32mcu.com/download/down/document_id/176/path_type/1).
+
 Should the link break, its called "GD32 MCU Dfu Tool" and can be grabbed from http://www.gd32mcu.com/en/download/.
+
 You will also need the matching drivers from [here](http://www.gd32mcu.com/download/down/document_id/244/path_type/1) installed if you have not used gigadevice parts before.
+
 These are called "GD32 Dfu Drivers" if the link breaks.
 
+You can also use dfu-util if you wish to set it up, but that is better documented by others
+
 ### FAQ
 
 #### [Miniware] The file is showing up with the extension `.ERR`

Documentation/History.md

@@ -1,5 +1,48 @@
 # Version Changes
 
+## V2.16
+
+* Overhaul of the Timer+ADC setup with help from @sandmanRO
+* Overhaul of the PID with help from @sandmanRO
+* Settings _should_ now upgrade in place to future versions, with resets only happening to new/changed settings
+* Shows error if tip runaway (failed temperature sensor) is detected
+* USB-PD now has a timeout, to allow forcing QC3 negotiation to start faster
+* QC3 Voltages are now adjustable to user desired setpoint
+* Added a small tolerance to allow "overvoltage" on QC3 above unit specifications.
+* * Please note: Doing this is entirely at your own risk!
+* New Advanced view that is much nicer to use and a very good daily driver option from @Mel-kior
+* OLED brightness and contrast thanks to @alvinhochun
+* Scrollbar is fixed so it doesnt jump around when menus are shown/hidden
+* Moved to `.dfu` files from `.bin` to make flashing commands easier
+* Every language had translation updates I believe
+* Romainian language added
+
+
+## V2.15
+
+
+## Feature upgrades:
+
+* MHP30 support
+* Multi-lingual firmware combinations now exist for Pinecil
+* More fine grained voltage controlled options
+* USB-PD improvements (version one and two)
+* More configuration options for power pulse
+* All font / character encoding has been very reworked
+* More translation updates than one can count 
+* More languages 😱 
+
+### MHP30
+
+The MHP30 is a small reflow station from Miniware.
+Thanks to a massive amount of help from @g3gg0 this firmware brings the beginnings of support for this unit.
+Also kudo's to @Vinigas  and @GoJian for helping with testing.
+This is not a _final_ version I'm sure, but this is a working, usable version of firmware support.
+Programs the same as any one Miniware unit using drag and drop.
+**Note: The boot logo scripts will need updates for this unit, so not supported yet.**
+
+The flood doors are now open for feature requests for this unit :)
+
 ## V2.14
 
 - Fixing auto rotation bug in the LIS accelerometer in the TS80/TS80P