sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity

Tidy up fonts ready for translations

Browse Source
This commit is contained in:
Ben V. Brown
2017-10-07 11:52:52 +11:00
parent 7933d0d37e
commit 64dbd7d32e
8 changed files with 148 additions and 338 deletions
Download Patch File Download Diff File Expand all files Collapse all files

257
workspace/TS100/src/Translation.c
View File

@@ -6,36 +6,25 @@
*/
#include "Translation.h"
#define LANG_EN
#define LANG
#ifndef LANG
#define LANG_EN
#define LANG
#endif
#ifndef LANG
#error NO LANGUAGE DEFINED
#endif
#ifdef LANG_EN
const char* SettingsLongNames[14] = {
const char* SettingsLongNames[15] = {
/*These are all the help text for all the settings.*/
/*No requirements on spacing or length*/
"Power source. Sets cutoff voltage. <DC 10V> <S 3.3V per cell>", //
"Sleep Temperature <C>", //
"Sleep Timeout <Minutes>", //
"Shutdown Timeout <Minutes>", //
"Motion Sensitivity <0.Off 1.least sensitive 9.most sensitive>", //
"Temperature Unit <C=Celsius F=Fahrenheit>", //
"Display detailed information in a smaller font.", //
"Display Orientation <A. Automatic L. Left Handed R. Right Handed>", //
"Enable front key enters boost mode 450C mode when soldering", //
"Temperature when in \"boost\" mode", //
"Automatically starts the iron into soldering on power up. T=Soldering, S= Sleep mode,F=Off", //
"Blink the temperature on the cooling screen while the tip is still hot.", //
"Calibrate tip offset.", //
"Reset all settings", //
"VIN Calibration. Buttons adjust, long press to exit", //
"Power source. Sets cutoff voltage. <DC 10V> <S 3.3V per cell>", //Power Source
"Sleep Temperature <C>", //Sleep Temp
"Sleep Timeout <Minutes>", //Sleep Timeout
"Shutdown Timeout <Minutes>", //Shutdown Time
"Motion Sensitivity <0.Off 1.least sensitive 9.most sensitive>", //Motion Sensitivity
"Temperature Unit <C=Celsius F=Fahrenheit>", //Temp Unit
"Display detailed information in a smaller font.", //Detailed Information
"Display Orientation <A. Automatic L. Left Handed R. Right Handed>", //Orientation
"Enable front key enters boost mode 450C mode when soldering", //Boost enable
"Temperature when in \"boost\" mode", //Boost Temp
"Automatically starts the iron into soldering on power up. T=Soldering, S= Sleep mode,F=Off", //Auto start
"Blink the temperature on the cooling screen while the tip is still hot.", //Cooling Blink
"Calibrate tip offset.", //Calibrate Tip
"Reset all settings", //Reset Settings
"VIN Calibration. Buttons adjust, long press to exit", //VIN Cal
};
const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
@@ -45,220 +34,14 @@ const char* SleepingAdvancedString = "Sleeping..."; // <=17 chars
const char* WarningSimpleString = "HOT!"; //Must be <= 4 chars
const char* WarningAdvancedString = "WARNING! TIP HOT!";
const char SettingTrueChar = 'V';
const char SettingFalseChar = 'F';
const char SettingSleepChar = 'S';
const char SettingFastChar = 'R';
const char SettingMediumChar = 'M';
const char SettingSlowChar = 'L';
const char SettingRightChar = 'D';
const char SettingLeftChar = 'I';
const char SettingAutoChar = 'A';
const char SettingTempCChar = 'C';
const char SettingTempFChar = 'F';
#endif
#ifdef LANG_ES
const char* SettingsLongNames[14] = {
/*These are all the help text for all the settings.*/
/*All must start with 6 spaces so they come on screen nicely.*/
"Fuente de energía. Ajusta el límite inferior de voltaje. <DC=10V S=3.3V por celda>", //
"Temperatura en reposo. <C>",//
"Tiempo hasta activar reposo. <Minutos>",//
"Tiempo hasta apagado. <Minutos>",//
"Sensibilidad del movimiento. <0=Apagado 1=El menos sensible 9=El más sensible>",//
"Display detailed information in a smaller font.",//
"Orientación de la pantalla <A=Automático I=Mano izquierda D=Mano derecha>",//
"Activar el botón \"Boost\" en modo soldadura.",//
"Temperatura en modo \"Boost\". <C>",//
"Iniciar modo soldadura en el encendido. <V=Sí S=Modo reposo F=No>",//
"Parpadea la temperatura en el enfriamiento si la punta sigue caliente.",//
"Calibrate tip offset.",//
"Reset all settings",//
};
const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
const char SettingTrueChar = 'V';
const char SettingFalseChar = 'F';
const char SettingSleepChar = 'S';
const char SettingFastChar = 'R';
const char SettingMediumChar = 'M';
const char SettingSlowChar = 'L';
const char SettingRightChar = 'D';
const char SettingLeftChar = 'I';
const char SettingAutoChar = 'A';
const char SettingTempCChar = 'C';
const char SettingTempFChar = 'F';
#endif
#ifdef LANG_DE
const char* SettingsLongNames[14] = {
/*These are all the help text for all the settings.*/
/*All must start with 6 spaces so they come on screen nicely.*/
"Stromversorgung. Setzt Abschaltspannung <DC=10V S=3.3V pro Zelle>",
"Ruhetemperatur <C>",
"Ruhemodus nach <Minuten>",
"Abschaltzeit <Minuten>",
"Bewegungsempfindlichkeit <0=Aus 1=Minimal 9=Maximal>",
"Display detailed information in a smaller font.", //
"Anzeigerichtung <A=Auto L=Linkshändig R=Rechtshändig>",
"Fronttaste für Temperaturboost einschalten",
"Temperatur im \"boost\"-Modus <C>",
"Automatischer Start beim Einschalten. <J=Löttemp R=Ruhemodus N=Aus>",
"Temperatur blinkt beim Abkühlen, solange noch heiß.",
"Calibrate tip offset.",//s
"Reset all settings",};
};
const char* UVLOWarningString = "V gering"; //Fixed width 8 chars
const char* CoolingPromptString = "Kalt ";//Fixed width 5 chars
const char SettingTrueChar = 'J';
const char SettingFalseChar = 'N';
const char SettingSleepChar = 'R';
const char SettingFastChar = 'S';
const char SettingMediumChar = 'M';
const char SettingSlowChar = 'L';
const char SettingRightChar = 'R';
const char SettingLeftChar = 'L';
const char SettingAutoChar = 'A';
const char SettingTempCChar = 'C';
const char SettingTempFChar = 'F';
#endif
#ifdef LANG_FR
const char* SettingsLongNames[14] = {
/*These are all the help text for all the settings.*/
/*All must start with 6 spaces so they come on screen nicely.*/
"Type d\'alimentation. Regle la tension de coupure. <DC=10V S=3.3V par cellules>",
"Temperature en veille. <C>",
"Temps avant mise en veille. <Minutes>",
"Temps avant extinction. <Minutes>",
"Sensibilitee du capteur de mouvement. <0=Inactif 1=Peu sensible 9=Tres sensible>",
"Display detailed information in a smaller font.", //
"Orientation de l\'affichage. <A=Automatique G=Gaucher D=Droitier>",
"Active le mode \"Boost\" 450C sur le bouton de devant pendant la soudure.",
"Temperature du mode \"Boost\". <C>",
"Demarre automatiquement la soudure a l\'allumage. <A=Active, V=Mode Veille, D=Desactive>",
"Fait clignotter la temperature pendant la phase de refroidissement quand la panne est chaude.",
"Calibrate tip offset.",//s
"Reset all settings",};
};
const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
const char* UVLOWarningString = "Batt Bas"; //Fixed width 8 chars
const char* CoolingPromptString = "Etein";//Fixed width 5 chars
const char SettingTrueChar = 'A';
const char SettingFalseChar = 'D';
const char SettingSleepChar = 'V';
const char SettingFastChar = 'R';
const char SettingMediumChar = 'M';
const char SettingSlowChar = 'L';
const char SettingRightChar = 'D';
const char SettingLeftChar = 'G';
const char SettingAutoChar = 'A';
const char SettingTempCChar = 'C';
const char SettingTempFChar = 'F';
#endif
#ifdef LANG_IT
const char* SettingsLongNames[14] = {
/*These are all the help text for all the settings.*/
"Sorgente di alimentazione. Imposta il limite inferiore di tensione. <DC=10V S=3.3V per cella>",
"Temperatura modalità riposo <C>",
"Timeout per passaggio a modalità riposo <Minuti>",
"Timeout spegnimento <Minuti>",
"Sensibilità al movimento <0=Spento 1=Sensibilità minima 9=Sensibilità massima>",
"Display detailed information in a smaller font.", //
"Orientamento del display <A=Automatico S=Sinistrorso D=Destrorso>",
"Il tasto anteriore abilita modalità \"boost\" fino a 450C durante la saldatura",
"Temperatura in modalità \"boost\" <C>",
"Avvia automaticamente il saldatore quando viene alimentato. <S=Modalità saldatura R=Modalità riposo N=Spento>",
"Durante lo spegnimento la temperatura lampeggia sul display finché la punta è calda.",
"Calibrate tip offset.",//s
"Reset all settings",};
};
const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
const char* CoolingPromptString = "Cool";//Fixed width 5 chars
const char SettingTrueChar = 'S';
const char SettingFalseChar = 'N';
const char SettingSleepChar = 'R';
const char SettingFastChar = 'V';
const char SettingMediumChar = 'M';
const char SettingSlowChar = 'L';
const char SettingRightChar = 'D';
const char SettingLeftChar = 'S';
const char SettingAutoChar = 'A';
const char SettingTempCChar = 'C';
const char SettingTempFChar = 'F';
#endif
#ifdef LANG_SE
const char* SettingsLongNames[14] = {
/*These are all the help text for all the settings.*/
"Stromforsorjning. Satt avstagningsvolt. <VX=10V S=3.3V per cell>",
"Vilolage Temperatur <C>",
"Vilolage Timeout <Minuter>",
"Avstagningstimeout <Minuter>",
"Rorelsekanslighet <0=Av 1=Minsta kanslighet 9=Hogsta kanslighet>",
"Display detailed information in a smaller font.", //
"Skarmorientation <A=Automatisk V=Vansterhant H=Hogerhant>",
"Aktivera boost-lage med framre knappen <P=Pa A=Av>",
"Temperatur i \"boostlage\" <C>",
"Startar i lodningslage direkt <L=Lodning V=Vilolage A=Av>",
"Blinka temperaturen medans jarnet fortfarande ar varmt. <P=Pa A=Av>",
"Calibrate tip offset.",//s
"Reset all settings",};
};
const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
const char* UVLOWarningString = "Lag Volt"; //Fixed width 8 chars
const char* CoolingPromptString = "Sval ";//Fixed width 5 chars
const char SettingTrueChar = 'P';
const char SettingFalseChar = 'A';
const char SettingSleepChar = 'V';
const char SettingFastChar = 'S';
const char SettingMediumChar = 'M';
const char SettingSlowChar = 'L';
const char SettingRightChar = 'H';
const char SettingLeftChar = 'V';
const char SettingAutoChar = 'A';
const char SettingTempCChar = 'C';
const char SettingTempFChar = 'F';
#endif
#ifdef LANG_RU
const char* SettingsLongNames[14] = {
//These are all the help text for all the settings./
"Источник питания. Установка напряжения отключения. <DC 10V> <S 3.3 V на батарею>", "Температура Сна <С>",
"Переход в режим Сна <Минуты>", "Переходит в режим ожидания <Минуты>",
"Акселерометр <0. Выкл. 1. мин. чувствительный 9. макс. чувствительный>",
"Display detailed information in a smaller font.",//
"Ориентация Дисплея <A. Автоматический L. Левая Рука R. Правая Рука>",
"Активация кнопки A для Турбо режима до 450С при пайке ", "Установка температуры для Турбо режима",
"Изменяет стрелки на дисплей питания при пайке",
"Автоматический запуск паяльника при включении питания. T=Нагрев, S=Режим Сна,F=Выкл.",
"Мигает температура на экране охлаждения, пока жало остается горячим.", "Calibrate tip offset.",//s
"Reset all settings",};
const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
const char* UVLOWarningString = "Low Volt"; //Fixed width 8 chars
const char* CoolingPromptString = "Выкл. ";//Fixed width 5 chars
const char SettingTrueChar = 'T';
const char SettingFalseChar = 'F';
const char SettingSleepChar = 'S';
const char SettingFastChar = 'F';
const char SettingMediumChar = 'M';
const char SettingSlowChar = 'S';
const char SettingRightChar = 'R';
const char SettingLeftChar = 'L';
const char SettingAutoChar = 'A';
const char SettingTempCChar = 'C';
const char SettingTempFChar = 'F';
#endif
const char* SettingsShortNames[14] = { /**/
const char* SettingsShortNames[15] = { /**/
"PWRSC ", // Power Source (DC or batt)
"STMP ", // Sleep Temperature
"STME ", // Sleep Timeout
@@ -272,5 +55,5 @@ const char* SettingsShortNames[14] = { /**/
"ASTART ", // Automatic Start mode
"CLBLNK ", // Cooldown blink
"TMP CAL?", // Temperature calibration enter menu
"RESET? " // Settings reset command
};
"RESET? ", // Settings reset command
"CAL VIN?", };