Merge pull request #1729 from alextrical/Short-Detection

Pinecil v2 short detection at boot

Translations/translation_BE.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Некантралюемае\nразаграванне"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Пераканайцеся, што пры наступнай загрузцы наканечнік і ручка маюць пакаёвую тэмпературу!"
         },

Translations/translation_BG.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Thermal\nRunaway"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Before rebooting, make sure tip & handle are at room temperature!"
         },

Translations/translation_CS.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Teplotní\nOchrana"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Před restartem se ujistěte, že hrot a držák mají pokojovou teplotu!"
         },

Translations/translation_DA.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Thermal\nRunaway"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Before rebooting, make sure tip & handle are at room temperature!"
         },

Translations/translation_DE.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Thermal\nRunaway"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Vor dem Neustart bitte sicherstellen, dass Lötspitze & Gerät Raumtemperatur haben!"
         },

Translations/translation_EL.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Θερμική\nΦυγή"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Πριν την επανεκκίνηση, βεβαιωθείτε ότι η μύτη και η συσκ. είναι σε θερμ. δωματίου!"
         },

Translations/translation_EN.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Thermal\nRunaway"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Before rebooting, make sure tip & handle are at room temperature!"
         },

Translations/translation_ES.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Térmico\nFuera de control"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "¡Antes de reiniciar, asegúrese de que la punta y el mango estén a temperatura ambiente!"
         },

Translations/translation_FI.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Thermal\nRunaway"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Before rebooting, make sure tip & handle are at room temperature!"
         },

Translations/translation_FR.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Emballement\nthermique"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Avant de redémarrer, assurez-vous que la panne et la poignée sont à température ambiante !"
         },

Translations/translation_HR.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Neispravan\ngrijač"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Prije restarta provjerite da su vrh i ručka na sobnoj temperaturi!"
         },

Translations/translation_HU.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Kontrollálatlan\nhőmérséklet!"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Újraindítás előtt a hegy és az eszköz legyen szobahőmérsékletű!"
         },

Translations/translation_IT.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Temperatura\nfuori controllo"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Prima di riavviare assicurati che la punta e l'impugnatura siano a temperatura ambiente!"
         },

Translations/translation_JA_JP.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "過熱"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Before rebooting, make sure tip & handle are at room temperature!"
         },

Translations/translation_LT.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Perkaitimo\npavojus"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Before rebooting, make sure tip & handle are at room temperature!"
         },

Translations/translation_NB.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Termisk\nrømling"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Before rebooting, make sure tip & handle are at room temperature!"
         },

Translations/translation_NL.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Verwarming\nOncontroleerbaar"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Before rebooting, make sure tip & handle are at room temperature!"
         },

Translations/translation_NL_BE.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Thermal\nRunaway"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Before rebooting, make sure tip & handle are at room temperature!"
         },

Translations/translation_PL.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Ucieczka\ntermiczna"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Upewnij się, że końcówka i uchwyt mają temperaturę pokojową podczas następnego rozruchu!"
         },

Translations/translation_PT.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Thermal\nRunaway"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Antes de reiniciar certifique-se que o ferro está à temperatura ambiente!"
         },

Translations/translation_RO.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Încălzire\nEşuată"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Înainte de repornire, asiguraţi-vă că vârful şi mânerul sunt la temperatura camerei!"
         },

Translations/translation_RU.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Неуправляемый\nРазогрев"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Пожалуйста, убедитесь, что жало и корпус имеют комнатную температуру при следующей загрузке!"
         },

Translations/translation_SK.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Únik\nTepla"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Before rebooting, make sure tip & handle are at room temperature!"
         },

Translations/translation_SL.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Thermal\nRunaway"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Before rebooting, make sure tip & handle are at room temperature!"
         },

Translations/translation_SR_CYRL.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Thermal\nRunaway"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Before rebooting, make sure tip & handle are at room temperature!"
         },

Translations/translation_SR_LATN.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Thermal\nRunaway"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Before rebooting, make sure tip & handle are at room temperature!"
         },

Translations/translation_SV.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Thermal\nRunaway"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Before rebooting, make sure tip & handle are at room temperature!"
         },

Translations/translation_TR.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Thermal\nRunaway"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Before rebooting, make sure tip & handle are at room temperature!"
         },

Translations/translation_UK.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Некерований\nрозігрів"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Під час наступного завантаження переконайтеся, що жало і ручка мають кімнатну температуру!"
         },

Translations/translation_VI.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "Nhiet\nTat gia nhiet"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Before rebooting, make sure tip & handle are at room temperature!"
         },

Translations/translation_YUE_HK.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "加熱失控"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Before rebooting, make sure tip & handle are at room temperature!"
         },

Translations/translation_ZH_CN.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "加热失控"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Before rebooting, make sure tip & handle are at room temperature!"
         },

Translations/translation_ZH_TW.json

@@ -30,6 +30,9 @@
         "WarningThermalRunaway": {
             "message": "加熱失控"
         },
+        "WarningTipShorted": {
+            "message": "!Tip Shorted!"
+        },
         "SettingsCalibrationWarning": {
             "message": "Before rebooting, make sure tip & handle are at room temperature!"
         },

Translations/translations_definitions.json

@@ -17,7 +17,9 @@
         },
         {
             "id": "NoPowerDeliveryMessage",
-            "include": ["POW_PD"],
+            "include": [
+                "POW_PD"
+            ],
             "description": "The IC required for USB-PD could not be communicated with. This is an error warning that USB-PD WILL NOT FUNCTION. Generally indicative of either a hardware or software issues."
         },
         {
@@ -35,7 +37,12 @@
         {
             "id": "WarningThermalRunaway",
             "description": "Warning text shown when the software has disabled the heater as a safety precaution as the temperature reading didn't react as expected."
-        }, {
+        },
+        {
+            "id": "WarningTipShorted",
+            "description": "Warning text shown when the software has detected that the users tip is likely shorted."
+        },
+        {
             "id": "SettingsCalibrationWarning",
             "description": "Confirmation message shown before performing an offset calibration. Should warn the user to make sure tip and handle are at the same temperature."
         },
@@ -50,50 +57,66 @@
         {
             "id": "UVLOWarningString",
             "maxLen": 8,
-            "include": ["POW_DC"],
+            "include": [
+                "POW_DC"
+            ],
             "description": "Warning text shown when the unit turns off due to undervoltage in simple mode."
         },
         {
             "id": "UndervoltageString",
             "maxLen": 15,
-            "include": ["POW_DC"],
+            "include": [
+                "POW_DC"
+            ],
             "description": "Warning text shown when the unit turns off due to undervoltage in advanced mode."
         },
         {
             "id": "InputVoltageString",
             "maxLen": 11,
             "note": "Preferably end with a space",
-            "include": ["POW_DC"],
+            "include": [
+                "POW_DC"
+            ],
             "description": "Prefix text for 'Input Voltage' shown before showing the input voltage reading."
         },
         {
             "id": "ProfilePreheatString",
             "maxLen": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Shown in profile mode while preheating"
         },
         {
             "id": "ProfileCooldownString",
             "maxLen": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Shown in profile mode while cooling down"
         },
         {
             "id": "SleepingSimpleString",
             "maxLen": 4,
-            "exclude": ["NO_SLEEP_MODE"],
+            "exclude": [
+                "NO_SLEEP_MODE"
+            ],
             "description": "The text shown to indicate the unit is in sleep mode when the advanced view is NOT on."
         },
         {
             "id": "SleepingAdvancedString",
             "maxLen": 15,
-            "exclude": ["NO_SLEEP_MODE"],
+            "exclude": [
+                "NO_SLEEP_MODE"
+            ],
             "description": "The text shown to indicate the unit is in sleep mode when the advanced view is turned on."
         },
         {
             "id": "SleepingTipAdvancedString",
             "maxLen": 6,
-            "exclude": ["NO_SLEEP_MODE"],
+            "exclude": [
+                "NO_SLEEP_MODE"
+            ],
             "description": "The prefix text shown before tip temperature when the unit is sleeping with advanced view on."
         },
         {
@@ -109,11 +132,14 @@
         {
             "id": "TooHotToStartProfileWarning",
             "default": "Too hot to\nstart profile",
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Shown when profile mode is started while the device is too hot."
         }
     ],
-    "characters": [{
+    "characters": [
+        {
             "id": "SettingRightChar",
             "len": 1,
             "description": "Shown for fixed Right-handed display rotation."
@@ -187,11 +213,15 @@
             "description": "Shown when the locking mode is set to lock all buttons."
         }
     ],
-    "menuGroups": [{
+    "menuGroups": [
+        {
             "id": "PowerMenu",
             "maxLen": 5,
             "maxLen2": 11,
-            "include": ["POW_DC", "POW_QC"],
+            "include": [
+                "POW_DC",
+                "POW_QC"
+            ],
             "description": "Menu for settings related to power. Main settings to do with the input voltage."
         },
         {
@@ -219,39 +249,50 @@
             "description": "Advanced settings. Misc catchall for settings that don't fit anywhere else or settings that require some thought before use."
         }
     ],
-    "menuOptions": [{
+    "menuOptions": [
+        {
             "id": "DCInCutoff",
             "maxLen": 5,
             "maxLen2": 11,
-            "include": ["POW_DC"],
+            "include": [
+                "POW_DC"
+            ],
             "description": "When the device is powered by a battery, this adjusts the low voltage threshold for when the unit should turn off the heater to protect the battery."
         },
         {
             "id": "MinVolCell",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["POW_DC"],
+            "include": [
+                "POW_DC"
+            ],
             "description": "When powered by a battery, this adjusts the minimum voltage per cell before shutdown. (This is multiplied by the cell count.)"
         },
         {
             "id": "QCMaxVoltage",
             "maxLen": 8,
             "maxLen2": 15,
-            "include": ["POW_QC"],
+            "include": [
+                "POW_QC"
+            ],
             "description": "This adjusts the maximum voltage the QC negotiation will adjust to. Does NOT affect USB-PD. Should be set safely based on the current rating of your power supply."
         },
         {
             "id": "PDNegTimeout",
             "maxLen": 8,
             "maxLen2": 15,
-            "include": ["POW_PD"],
+            "include": [
+                "POW_PD"
+            ],
             "description": "How long until firmware stops trying to negotiate for USB-PD and tries QC instead. Longer times may help dodgy / old PD adapters, faster times move onto PD quickly. Units of 100ms. Recommended to keep small values."
         },
         {
             "id": "PDVpdo",
             "maxLen": 7,
             "maxLen2": 15,
-            "include": ["POW_PD"],
+            "include": [
+                "POW_PD"
+            ],
             "description": "Enabled PPS & EPR modes."
         },
         {
@@ -288,98 +329,126 @@
             "id": "ProfilePhases",
             "maxLen": 6,
             "maxLen2": 13,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "set the number of phases for profile mode."
         },
         {
             "id": "ProfilePreheatTemp",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Preheat to this temperature at the start of profile mode."
         },
         {
             "id": "ProfilePreheatSpeed",
             "maxLen": 5,
             "maxLen2": 11,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "How fast the temperature is allowed to rise during the preheat phase at the start of profile mode."
         },
         {
             "id": "ProfilePhase1Temp",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Target temperature for the end of phase 1 of profile mode."
         },
         {
             "id": "ProfilePhase1Duration",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Duration of phase 1 of profile mode. The phase might actually take longer if it takes longer to reach the target temperature."
         },
         {
             "id": "ProfilePhase2Temp",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Target temperature for the end of phase 2 of profile mode."
         },
         {
             "id": "ProfilePhase2Duration",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Duration of phase 2 of profile mode. The phase might actually take longer if it takes longer to reach the target temperature."
         },
         {
             "id": "ProfilePhase3Temp",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Target temperature for the end of phase 3 of profile mode."
         },
         {
             "id": "ProfilePhase3Duration",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Duration of phase 3 of profile mode. The phase might actually take longer if it takes longer to reach the target temperature."
         },
         {
             "id": "ProfilePhase4Temp",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Target temperature for the end of phase 5 of profile mode."
         },
         {
             "id": "ProfilePhase4Duration",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Duration of phase 5 of profile mode. The phase might actually take longer if it takes longer to reach the target temperature."
         },
         {
             "id": "ProfilePhase5Temp",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Target temperature for the end of phase 5 of profile mode."
         },
         {
             "id": "ProfilePhase5Duration",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Duration of phase 5 of profile mode. The phase might actually take longer if it takes longer to reach the target temperature."
         },
         {
             "id": "ProfileCooldownSpeed",
             "maxLen": 5,
             "maxLen2": 11,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "How fast the temperature is allowed to drop during the cooldown phase at the end of profile mode."
         },
         {
@@ -392,14 +461,18 @@
             "id": "SleepTemperature",
             "maxLen": 4,
             "maxLen2": 9,
-            "exclude": ["NO_SLEEP_MODE"],
+            "exclude": [
+                "NO_SLEEP_MODE"
+            ],
             "description": "Temperature the device will drop down to while asleep. Typically around halfway between off and soldering temperature."
         },
         {
             "id": "SleepTimeout",
             "maxLen": 4,
             "maxLen2": 9,
-            "exclude": ["NO_SLEEP_MODE"],
+            "exclude": [
+                "NO_SLEEP_MODE"
+            ],
             "description": "How long of a period without movement / button-pressing is required before the device drops down to the sleep temperature."
         },
         {
@@ -412,7 +485,9 @@
             "id": "HallEffSensitivity",
             "maxLen": 6,
             "maxLen2": 13,
-            "include": ["HALL_SENSOR"],
+            "include": [
+                "HALL_SENSOR"
+            ],
             "description": "If the unit has a hall effect sensor (Pinecil), this adjusts how sensitive it is at detecting a magnet to put the device into sleep mode."
         },
         {
@@ -425,7 +500,9 @@
             "id": "DisplayRotation",
             "maxLen": 6,
             "maxLen2": 13,
-            "exclude": ["NO_DISPLAY_ROTATE"],
+            "exclude": [
+                "NO_DISPLAY_ROTATE"
+            ],
             "description": "If the display should rotate automatically or if it should be fixed for left- or right-handed mode."
         },
         {
@@ -492,7 +569,9 @@
             "id": "BluetoothLE",
             "maxLen": 7,
             "maxLen2": 15,
-            "include": ["BLE_ENABLED"],
+            "include": [
+                "BLE_ENABLED"
+            ],
             "description": "Should BLE be enabled at boot time."
         },
         {

source/Core/BSP/BSP.h

@@ -102,6 +102,8 @@ void setBuzzer(bool on);
 uint8_t preStartChecks();
 uint8_t preStartChecksDone();
 
+// Check if the tip or output mosfet is shorted (if possible)
+bool isTipShorted();
 // Show the boot logo
 void showBootLogo(void);
 #ifdef __cplusplus

source/Core/BSP/MHP30/Power.cpp

@@ -19,3 +19,4 @@ void power_check() {
 bool getIsPoweredByDCIN() { return false; }
 
 uint8_t getTipResistanceX10() { return TIP_RESISTANCE; }
+bool    isTipShorted() { return false; }

source/Core/BSP/Miniware/BSP.cpp

@@ -285,6 +285,7 @@ void performTipResistanceSampleReading() {
 
   tipResistanceReadingSlot++;
 }
+bool tipShorted = false;
 void FinishMeasureTipResistance() {
 
   // Otherwise we now have the 4 samples;
@@ -304,6 +305,8 @@ void FinishMeasureTipResistance() {
     // return; // Change nothing as probably disconnected tip
     tipResistanceReadingSlot = lastTipResistance = 0;
     return;
+  } else if (reading < 200) {
+    tipShorted = true;
   } else if (reading < 800) {
     newRes = 62;
   } else {
@@ -373,7 +376,7 @@ uint64_t getDeviceID() {
 
 uint8_t preStartChecksDone() {
 #ifdef TIP_RESISTANCE_SENSE_Pin
-  return (lastTipResistance == 0 || tipResistanceReadingSlot < numTipResistanceReadings || tipMeasurementOccuring) ? 0 : 1;
+  return (lastTipResistance == 0 || tipResistanceReadingSlot < numTipResistanceReadings || tipMeasurementOccuring || tipShorted) ? 0 : 1;
 #else
   return 1;
 #endif
@@ -388,7 +391,11 @@ uint8_t getTipResistanceX10() {
   return TIP_RESISTANCE;
 #endif
 }
-
+#ifdef TIP_RESISTANCE_SENSE_Pin
+bool isTipShorted() { return tipShorted; }
+#else
+bool isTipShorted() { return false; }
+#endif
 uint8_t getTipThermalMass() {
 #ifdef TIP_RESISTANCE_SENSE_Pin
   if (lastTipResistance >= 80) {

source/Core/BSP/Pinecil/BSP.cpp

@@ -94,7 +94,7 @@ uint8_t  preStartChecks() { return 1; }
 uint64_t getDeviceID() { return dbg_id_get(); }
 
 uint8_t getTipResistanceX10() { return TIP_RESISTANCE; }
-
+bool    isTipShorted() { return false; }
 uint8_t preStartChecksDone() { return 1; }
 
 uint8_t getTipThermalMass() { return TIP_THERMAL_MASS; }

source/Core/BSP/Pinecilv2/BSP.cpp

@@ -189,7 +189,7 @@ void performTipResistanceSampleReading() {
   gpio_write(TIP_RESISTANCE_SENSE, tipResistanceReadingSlot == 0);
   tipResistanceReadingSlot++;
 }
-
+bool tipShorted = false;
 void FinishMeasureTipResistance() {
 
   // Otherwise we now have the 4 samples;
@@ -208,6 +208,8 @@ void FinishMeasureTipResistance() {
   uint8_t newRes = 0;
   if (reading > 8000) {
     // return; // Change nothing as probably disconnected tip
+  } else if (reading < 500) {
+    tipShorted = true;
   } else if (reading < 4000) {
     newRes = 62;
   } else {
@@ -217,7 +219,7 @@ void FinishMeasureTipResistance() {
 }
 volatile bool       tipMeasurementOccuring = true;
 volatile TickType_t nextTipMeasurement     = 100;
-
+bool                isTipShorted() { return tipShorted; }
 void                performTipMeasurementStep() {
 
   // Wait 100ms for settle time
@@ -240,7 +242,8 @@ uint8_t preStartChecks() {
   performTipMeasurementStep();
   return preStartChecksDone();
 }
-uint8_t preStartChecksDone() { return (lastTipResistance == 0 || tipResistanceReadingSlot < numTipResistanceReadings || tipMeasurementOccuring) ? 0 : 1; }
+// If we are still measuring the tip; or tip is shorted; prevent heating
+uint8_t preStartChecksDone() { return (lastTipResistance == 0 || tipResistanceReadingSlot < numTipResistanceReadings || tipMeasurementOccuring || tipShorted) ? 0 : 1; }
 
 // Return hardware unique ID if possible
 uint64_t getDeviceID() {

source/Core/BSP/Sequre_S60/BSP.cpp

@@ -231,7 +231,7 @@ uint64_t getDeviceID() {
 }
 
 uint8_t getTipResistanceX10() { return TIP_RESISTANCE; }
-
+bool    isTipShorted() { return false; }
 uint8_t preStartChecksDone() { return 1; }
 
 uint8_t getTipThermalMass() { return TIP_THERMAL_MASS; }

source/Core/Inc/Translation.h

@@ -116,6 +116,7 @@ struct TranslationIndexTable {
   uint16_t UnlockingKeysString;
   uint16_t WarningKeysLockedString;
   uint16_t WarningThermalRunaway;
+  uint16_t WarningTipShorted;
 
   uint16_t SettingsCalibrationWarning;
   uint16_t CJCCalibrating;

source/Core/Inc/settingsGUI.hpp

@@ -8,9 +8,11 @@
 #ifndef GUI_HPP_
 #define GUI_HPP_
 #include "BSP.h"
+#include "FreeRTOS.h"
 #include "Settings.h"
 #include "Translation.h"
 
+
 #define PRESS_ACCEL_STEP         (TICKS_100MS / 3)
 #define PRESS_ACCEL_INTERVAL_MIN TICKS_100MS
 #define PRESS_ACCEL_INTERVAL_MAX (TICKS_100MS * 3)
@@ -35,7 +37,7 @@ typedef struct {
 } menuitem;
 
 void                  enterSettingsMenu();
-void                  warnUser(const char *warning, const int timeout);
+void                  warnUser(const char *warning, const TickType_t timeout);
 extern const menuitem rootSettingsMenu[];
 
 #endif /* GUI_HPP_ */

source/Core/Threads/OperatingModes/ShowStartupWarnings.cpp

@@ -48,5 +48,9 @@ void showWarnings(void) {
     }
   }
 #endif /*POW_PD_EXT==1*/
+       // If tip looks to be shorted, yell at user and dont auto dismiss
+  if (isTipShorted()) {
+    warnUser(translatedString(Tr->WarningTipShorted), portMAX_DELAY);
+  }
 #endif /*NO_WARN_MISSING*/
 }

source/Core/Threads/OperatingModes/utils/OperatingModeUtilities.h

@@ -10,7 +10,7 @@ bool     shouldBeSleeping(bool inAutoStart);                 //
 bool     shouldShutdown(void);                                    //
 void     gui_drawTipTemp(bool symbol, const FontStyle font);      //
 void     printVoltage(void);                                      //
-void     warnUser(const char *warning, const int timeout);   //
+void     warnUser(const char *warning, const TickType_t timeout); //
 void     gui_drawBatteryIcon(void);                               //
 bool     checkForUnderVoltage(void);                              //
 uint16_t min(uint16_t a, uint16_t b);                             //

source/Core/Threads/OperatingModes/utils/ShowWarning.cpp

@@ -1,6 +1,6 @@
 #include "Buttons.hpp"
 #include "OperatingModeUtilities.h"
-void warnUser(const char *warning, const int timeout) {
+void warnUser(const char *warning, const TickType_t timeout) {
   OLED::clearScreen();
   OLED::printWholeScreen(warning);
   OLED::refresh();