Run formatter

source/Core/BSP/Pine64/BSP.cpp

@@ -17,9 +17,7 @@ uint16_t totalPWM; // htim2.Init.Period, the full PWM cycle
 
 // 2 second filter (ADC is PID_TIM_HZ Hz)
 history<uint16_t, PID_TIM_HZ> rawTempFilter = {{0}, 0, 0};
-void resetWatchdog() {
+void                          resetWatchdog() { fwdgt_counter_reload(); }
-	fwdgt_counter_reload();
-}
 
 uint16_t getTipInstantTemperature() {
   volatile uint16_t sum = 0; // 12 bit readings * 8*2 -> 16 bits
@@ -110,22 +108,15 @@ void unstick_I2C() {
   gpio_init(SDA_GPIO_Port, GPIO_MODE_AF_OD, GPIO_OSPEED_50MHZ, SDA_Pin | SCL_Pin);
 }
 
-uint8_t getButtonA() {
+uint8_t getButtonA() { return (gpio_input_bit_get(KEY_A_GPIO_Port, KEY_A_Pin) == SET) ? 1 : 0; }
-	return (gpio_input_bit_get(KEY_A_GPIO_Port, KEY_A_Pin) == SET) ? 1 : 0;
+uint8_t getButtonB() { return (gpio_input_bit_get(KEY_B_GPIO_Port, KEY_B_Pin) == SET) ? 1 : 0; }
-}
-uint8_t getButtonB() {
-	return (gpio_input_bit_get(KEY_B_GPIO_Port, KEY_B_Pin) == SET) ? 1 : 0;
-}
 
 void reboot() {
   // Spin for watchdog
-	for (;;) {
+  for (;;) {}
-	}
 }
 
-void delay_ms(uint16_t count) {
+void     delay_ms(uint16_t count) { delay_1ms(count); }
-	delay_1ms(count);
-}
 uint32_t __get_IPSR(void) {
   return 0; // To shut-up CMSIS
 }

source/Core/BSP/Pine64/I2C_Wrapper.cpp

@@ -15,9 +15,7 @@ void FRToSI2C::CpltCallback() {
   // TODO
 }
 
-bool FRToSI2C::I2C_RegisterWrite(uint8_t address, uint8_t reg, uint8_t data) {
+bool FRToSI2C::I2C_RegisterWrite(uint8_t address, uint8_t reg, uint8_t data) { return Mem_Write(address, reg, &data, 1); }
-	return Mem_Write(address, reg, &data, 1);
-}
 
 uint8_t FRToSI2C::I2C_RegisterRead(uint8_t add, uint8_t reg) {
   uint8_t temp = 0;
@@ -52,7 +50,6 @@ struct i2c_state {
   uint8_t *            buffer;
   uint16_t             numberOfBytes;
   dma_parameter_struct dma_init_struct;
-
 };
 volatile i2c_state currentState;
 
@@ -303,18 +300,14 @@ bool FRToSI2C::Mem_Write(uint16_t DevAddress, uint16_t MemAddress, uint8_t *p_bu
   return res;
 }
 
-bool FRToSI2C::Transmit(uint16_t DevAddress, uint8_t *pData, uint16_t Size) {
+bool FRToSI2C::Transmit(uint16_t DevAddress, uint8_t *pData, uint16_t Size) { return Mem_Write(DevAddress, pData[0], pData + 1, Size - 1); }
-	return Mem_Write(DevAddress, pData[0], pData + 1, Size - 1);
-}
 
 bool FRToSI2C::probe(uint16_t DevAddress) {
   uint8_t temp[1];
   return Mem_Read(DevAddress, 0x00, temp, sizeof(temp));
 }
 
-void FRToSI2C::I2C_Unstick() {
+void FRToSI2C::I2C_Unstick() { unstick_I2C(); }
-	unstick_I2C();
-}
 
 bool FRToSI2C::lock() {
   if (I2CSemaphore == nullptr) {
@@ -323,9 +316,7 @@ bool FRToSI2C::lock() {
   return xSemaphoreTake(I2CSemaphore, TICKS_SECOND) == pdTRUE;
 }
 
-void FRToSI2C::unlock() {
+void FRToSI2C::unlock() { xSemaphoreGive(I2CSemaphore); }
-	xSemaphoreGive(I2CSemaphore);
-}
 
 bool FRToSI2C::writeRegistersBulk(const uint8_t address, const I2C_REG *registers, const uint8_t registersLength) {
   for (int index = 0; index < registersLength; index++) {
@@ -351,10 +342,7 @@ bool FRToSI2C::wakePart(uint16_t DevAddress) {
   return res;
 }
 
-void I2C_EV_IRQ() {
+void I2C_EV_IRQ() {}
-
-}
 void I2C_ER_IRQ() {
   // Error callbacks
-
 }

source/Core/Drivers/FUSB302/policy_engine.cpp

@@ -628,10 +628,6 @@ PolicyEngine::policy_engine_state PolicyEngine::pe_sink_source_unresponsive() {
   return PESinkSourceUnresponsive;
 }
 
-uint32_t PolicyEngine::waitForEvent(uint32_t mask, TickType_t ticksToWait) {
+uint32_t PolicyEngine::waitForEvent(uint32_t mask, TickType_t ticksToWait) { return xEventGroupWaitBits(xEventGroupHandle, mask, mask, pdFALSE, ticksToWait); }
-	return xEventGroupWaitBits(xEventGroupHandle, mask, mask, pdFALSE, ticksToWait);
-}
 
-bool PolicyEngine::isPD3_0() {
+bool PolicyEngine::isPD3_0() { return (hdr_template & PD_HDR_SPECREV) == PD_SPECREV_3_0; }
-	return (hdr_template & PD_HDR_SPECREV) == PD_SPECREV_3_0;
-}

source/Core/Src/gui.cpp

@@ -165,7 +165,8 @@ const menuitem UIMenu[] = {
      *  Cooldown blink
      *  Reverse Temp change buttons + -
      */
-    {(const char *)SettingsDescriptions[5], settings_setTempF, settings_displayTempF}, /* Temperature units, this has to be the first element in the array to work with the logic in settings_enterUIMenu() */
+    {(const char *)SettingsDescriptions[5], settings_setTempF,
+     settings_displayTempF}, /* Temperature units, this has to be the first element in the array to work with the logic in settings_enterUIMenu() */
     {(const char *)SettingsDescriptions[7], settings_setDisplayRotation, settings_displayDisplayRotation},                                /*Display Rotation*/
     {(const char *)SettingsDescriptions[10], settings_setCoolingBlinkEnabled, settings_displayCoolingBlinkEnabled},                       /*Cooling blink warning*/
     {(const char *)SettingsDescriptions[15], settings_setScrollSpeed, settings_displayScrollSpeed},                                       /*Scroll Speed for descriptions*/

source/Core/Threads/GUIThread.cpp

@@ -514,8 +514,7 @@ static void gui_solderingMode(uint8_t jumpToSleep) {
         if (oldTemp != systemSettings.SolderingTemp) {
           saveSettings(); // only save on change
         }
-			}
+      } break;
-				break;
       case BUTTON_BOTH_LONG:
         if (systemSettings.lockingMode != 0) {
           // Lock buttons
@@ -654,9 +653,7 @@ void showDebugMenu(void) {
       break;
     case 6:
       // Raw Tip
-		{
+      { OLED::printNumber(TipThermoModel::convertTipRawADCTouV(getTipRawTemp(0), true), 6); }
-			OLED::printNumber(TipThermoModel::convertTipRawADCTouV(getTipRawTemp(0), true), 6);
-		}
       break;
     case 7:
       // Temp in C