Clarify and add details to documents (#1383)

* Update README.md

* Update Menu.md

Thoughts:
- changing the name in display to "Calibrate Tip Offset" (currently shows Calibrate temperature) might be more clear, and then people will not get  nervous and think the number displayed means temperature? since it is just a number, i.e., 765,  and does not say  "765 offset"    I suggest changing to either  "number Offset"   or  changing menu name to "Calibrate Tip Offset"  .  when people incorrectly  beleive the high number is temperature, since it says "calibrate temperature?"  then it leads to unwarranted concern that the pinecil or IronOS is broken.

* Update Menu.md

* Update Temperature.md

clarify language, add punctuation.

* Update HallSensor.md

* Update HallSensor.md

* Update HallSensor.md

* Update HallSensor.md

* Update HallSensor.md

* Update HallSensor.md

* Update HallSensor.md

* Update DebugMenu.md

* Update DebugMenu.md

* Update DebugMenu.md

* Update DebugMenu.md

* Update Flashing.md

* Update HallSensor.md

* Update GettingStarted.md

* Update DebugMenu.md

* Update GettingStarted.md

* Update HallSensor.md

* Update HallSensor.md

* Update HallSensor.md

* Update HallSensor.md

* Update HallSensor.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update Menu.md

* Update History.md

* Update History.md

updated history with some of the Releases that were missing.

* Update DebugMenu.md

* Update DebugMenu.md

* Update DebugMenu.md

* Update DebugMenu.md

* Update DebugMenu.md

* Update DebugMenu.md

* Update DebugMenu.md

* Update README.md

* Update Temperature.md

* Update DebugMenu.md

* Update Flashing.md

* Update Flashing.md

* Update Temperature.md

* Update Temperature.md

* Update DebugMenu.md

* Update DebugMenu.md

* Update Temperature.md

* Update Temperature.md

* Update Temperature.md

* Update Temperature.md

* Update README.md

Co-authored-by: discip <53649486+discip@users.noreply.github.com>

* Update Temperature.md

* Update Troubleshooting.md

In which troubleshooting conditions/symptoms would:

(1) Re-calibrating  tip offset temperature be appropriate?
(2) Re-Calibrating Input voltage be appropriate?

I think these 2 internal tests would be helpful sections for Troubleshooting, but not sure of all details to write-up.

* Update GettingStarted.md

Co-authored-by: discip <53649486+discip@users.noreply.github.com>

Documentation/GettingStarted.md

@@ -72,16 +72,16 @@ If, after entering sleep mode, the iron still does not see movement for a much l
 The settings menu is the most often evolving aspect of the firmware, so each option is not documented here. However, do not panic, as every menu option has an on-screen description so you don't _need_ to come back here to figure them all out.
 
 To navigate the menu, the two buttons act separately.
-The button that you pressed to enter the menu (rear) scrolls down the options, and the other button (front) will enter and change the current option.
+The rear button (`-/B`) is pressed to enter the menu and scrolls down the main options, and the other front button (`+/A`) will enter and change the current option.
 
-To see a description of an option, just wait and after a little time, it will scroll across the screen.
+To see a description of an option, just wait, and after a few seconds, it will scroll across the screen.
 
-The menu is comprised of a 'main menu' of categories and then sub-items that allows you to adjust parameters.
+The menu is comprised of a 'main menu' of categories and then sub-items that allow you to adjust parameters.
 
 You can long hold buttons to change through options faster, and there is some acceleration when holding the buttons.
 
-There is a small scrollbar that will be shown along the edge of the screen to indicate how far through the current list you are.
+There is a small scrollbar that appears along the right edge of the screen to indicate how far through the current list you are (looks like a dot).
 
-Additionally, this scrollbar will blink rapidly when you are on the last item in a menu choice.
+Additionally, this scrollbar will blink rapidly when you are on the last value in a range of a sub-menu. For example, if you are in Motion Sensitivity, which has a range of 0 - 9,  it will blink when you are at 9.
 
-I highly recommend taking a few minutes to go through all of the options in the menu to get a feel for what you can change, almost every aspect of the internal system is adjustable to suit your needs.
+I highly recommend taking a few minutes to go through all of the options in the menu to get a feel for what you can change, almost every aspect of the internal system is adjustable to suit your needs. If you want to start over, simply go to Advanced settings > Restore factory settings, confirm using the front (`+/A`) button. This sets all menu items to defaults, and keeps the same version firmware.