Import miniware files
This commit is contained in:
Ben V. Brown
469
source/Core/BSP/MHP30/Setup.c
Normal file
469
source/Core/BSP/MHP30/Setup.c
Normal file
@@ -0,0 +1,469 @@
|
||||
/*
|
||||
* Setup.c
|
||||
*
|
||||
* Created on: 29Aug.,2017
|
||||
* Author: Ben V. Brown
|
||||
*/
|
||||
#include "Setup.h"
|
||||
#include "Pins.h"
|
||||
ADC_HandleTypeDef hadc1;
|
||||
ADC_HandleTypeDef hadc2;
|
||||
DMA_HandleTypeDef hdma_adc1;
|
||||
|
||||
I2C_HandleTypeDef hi2c1;
|
||||
DMA_HandleTypeDef hdma_i2c1_rx;
|
||||
DMA_HandleTypeDef hdma_i2c1_tx;
|
||||
|
||||
IWDG_HandleTypeDef hiwdg;
|
||||
TIM_HandleTypeDef htim2;
|
||||
TIM_HandleTypeDef htim3;
|
||||
#define ADC_CHANNELS 2
|
||||
#define ADC_SAMPLES 16
|
||||
uint32_t ADCReadings[ADC_SAMPLES * ADC_CHANNELS]; // room for 32 lots of the pair of readings
|
||||
|
||||
// Functions
|
||||
static void SystemClock_Config(void);
|
||||
static void MX_ADC1_Init(void);
|
||||
static void MX_I2C1_Init(void);
|
||||
static void MX_IWDG_Init(void);
|
||||
static void MX_TIM3_Init(void);
|
||||
static void MX_TIM2_Init(void);
|
||||
static void MX_DMA_Init(void);
|
||||
static void MX_GPIO_Init(void);
|
||||
static void MX_ADC2_Init(void);
|
||||
void Setup_HAL() {
|
||||
SystemClock_Config();
|
||||
|
||||
#ifndef SWD_ENABLE
|
||||
__HAL_AFIO_REMAP_SWJ_DISABLE();
|
||||
#else
|
||||
__HAL_AFIO_REMAP_SWJ_NOJTAG();
|
||||
#endif
|
||||
|
||||
MX_GPIO_Init();
|
||||
MX_DMA_Init();
|
||||
MX_I2C1_Init();
|
||||
MX_ADC1_Init();
|
||||
MX_ADC2_Init();
|
||||
MX_TIM3_Init();
|
||||
MX_TIM2_Init();
|
||||
MX_IWDG_Init();
|
||||
HAL_ADC_Start(&hadc2);
|
||||
HAL_ADCEx_MultiModeStart_DMA(&hadc1, ADCReadings, (ADC_SAMPLES * ADC_CHANNELS)); // start DMA of normal readings
|
||||
HAL_ADCEx_InjectedStart(&hadc1); // enable injected readings
|
||||
HAL_ADCEx_InjectedStart(&hadc2); // enable injected readings
|
||||
}
|
||||
|
||||
// channel 0 -> temperature sensor, 1-> VIN
|
||||
uint16_t getADC(uint8_t channel) {
|
||||
uint32_t sum = 0;
|
||||
for (uint8_t i = 0; i < ADC_SAMPLES; i++) {
|
||||
uint16_t adc1Sample = ADCReadings[channel + (i * ADC_CHANNELS)];
|
||||
uint16_t adc2Sample = ADCReadings[channel + (i * ADC_CHANNELS)] >> 16;
|
||||
|
||||
sum += (adc1Sample + adc2Sample);
|
||||
}
|
||||
return sum >> 2;
|
||||
}
|
||||
|
||||
/** System Clock Configuration
|
||||
*/
|
||||
void SystemClock_Config(void) {
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInit;
|
||||
|
||||
/**Initializes the CPU, AHB and APB busses clocks
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSI;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSICalibrationValue = 16;
|
||||
RCC_OscInitStruct.LSIState = RCC_LSI_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL16; // 64MHz
|
||||
HAL_RCC_OscConfig(&RCC_OscInitStruct);
|
||||
|
||||
/**Initializes the CPU, AHB and APB busses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV16; // TIM
|
||||
// 2,3,4,5,6,7,12,13,14
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 64 mhz to some peripherals and adc
|
||||
|
||||
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2);
|
||||
|
||||
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC;
|
||||
PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV6; // 6 or 8 are the only non overclocked options
|
||||
HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit);
|
||||
|
||||
/**Configure the Systick interrupt time
|
||||
*/
|
||||
HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq() / 1000);
|
||||
|
||||
/**Configure the Systick
|
||||
*/
|
||||
HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK);
|
||||
|
||||
/* SysTick_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(SysTick_IRQn, 15, 0);
|
||||
}
|
||||
|
||||
/* ADC1 init function */
|
||||
static void MX_ADC1_Init(void) {
|
||||
ADC_MultiModeTypeDef multimode;
|
||||
|
||||
ADC_ChannelConfTypeDef sConfig;
|
||||
ADC_InjectionConfTypeDef sConfigInjected;
|
||||
/**Common config
|
||||
*/
|
||||
hadc1.Instance = ADC1;
|
||||
hadc1.Init.ScanConvMode = ADC_SCAN_ENABLE;
|
||||
hadc1.Init.ContinuousConvMode = ENABLE;
|
||||
hadc1.Init.DiscontinuousConvMode = DISABLE;
|
||||
hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
|
||||
hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
||||
hadc1.Init.NbrOfConversion = ADC_CHANNELS;
|
||||
HAL_ADC_Init(&hadc1);
|
||||
|
||||
/**Configure the ADC multi-mode
|
||||
*/
|
||||
multimode.Mode = ADC_DUALMODE_REGSIMULT_INJECSIMULT;
|
||||
HAL_ADCEx_MultiModeConfigChannel(&hadc1, &multimode);
|
||||
|
||||
/**Configure Regular Channel
|
||||
*/
|
||||
sConfig.Channel = TMP36_ADC1_CHANNEL;
|
||||
sConfig.Rank = ADC_REGULAR_RANK_1;
|
||||
sConfig.SamplingTime = ADC_SAMPLETIME_71CYCLES_5;
|
||||
HAL_ADC_ConfigChannel(&hadc1, &sConfig);
|
||||
|
||||
/**Configure Regular Channel
|
||||
*/
|
||||
sConfig.Channel = VIN_ADC1_CHANNEL;
|
||||
sConfig.Rank = ADC_REGULAR_RANK_2;
|
||||
HAL_ADC_ConfigChannel(&hadc1, &sConfig);
|
||||
|
||||
/**Configure Injected Channel
|
||||
*/
|
||||
// F in = 10.66 MHz
|
||||
/*
|
||||
* Injected time is 1 delay clock + (12 adc cycles*4)+4*sampletime =~217
|
||||
* clocks = 0.2ms Charge time is 0.016 uS ideally So Sampling time must be >=
|
||||
* 0.016uS 1/10.66MHz is 0.09uS, so 1 CLK is *should* be enough
|
||||
* */
|
||||
sConfigInjected.InjectedChannel = TIP_TEMP_ADC1_CHANNEL;
|
||||
sConfigInjected.InjectedRank = 1;
|
||||
sConfigInjected.InjectedNbrOfConversion = 4;
|
||||
sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_1CYCLE_5;
|
||||
sConfigInjected.ExternalTrigInjecConv = ADC_EXTERNALTRIGINJECCONV_T2_CC1;
|
||||
sConfigInjected.AutoInjectedConv = DISABLE;
|
||||
sConfigInjected.InjectedDiscontinuousConvMode = DISABLE;
|
||||
sConfigInjected.InjectedOffset = 0;
|
||||
|
||||
HAL_ADCEx_InjectedConfigChannel(&hadc1, &sConfigInjected);
|
||||
sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_1CYCLE_5;
|
||||
|
||||
sConfigInjected.InjectedRank = 2;
|
||||
HAL_ADCEx_InjectedConfigChannel(&hadc1, &sConfigInjected);
|
||||
sConfigInjected.InjectedRank = 3;
|
||||
HAL_ADCEx_InjectedConfigChannel(&hadc1, &sConfigInjected);
|
||||
sConfigInjected.InjectedRank = 4;
|
||||
HAL_ADCEx_InjectedConfigChannel(&hadc1, &sConfigInjected);
|
||||
SET_BIT(hadc1.Instance->CR1, (ADC_CR1_JEOCIE)); // Enable end of injected conv irq
|
||||
// Run ADC internal calibration
|
||||
while (HAL_ADCEx_Calibration_Start(&hadc1) != HAL_OK)
|
||||
;
|
||||
}
|
||||
|
||||
/* ADC2 init function */
|
||||
static void MX_ADC2_Init(void) {
|
||||
ADC_ChannelConfTypeDef sConfig;
|
||||
ADC_InjectionConfTypeDef sConfigInjected;
|
||||
|
||||
/**Common config
|
||||
*/
|
||||
hadc2.Instance = ADC2;
|
||||
hadc2.Init.ScanConvMode = ADC_SCAN_ENABLE;
|
||||
hadc2.Init.ContinuousConvMode = ENABLE;
|
||||
hadc2.Init.DiscontinuousConvMode = DISABLE;
|
||||
hadc2.Init.ExternalTrigConv = ADC_SOFTWARE_START;
|
||||
hadc2.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
||||
hadc2.Init.NbrOfConversion = ADC_CHANNELS;
|
||||
HAL_ADC_Init(&hadc2);
|
||||
|
||||
/**Configure Regular Channel
|
||||
*/
|
||||
sConfig.Channel = TMP36_ADC2_CHANNEL;
|
||||
sConfig.Rank = ADC_REGULAR_RANK_1;
|
||||
sConfig.SamplingTime = ADC_SAMPLETIME_71CYCLES_5;
|
||||
HAL_ADC_ConfigChannel(&hadc2, &sConfig);
|
||||
|
||||
sConfig.Channel = VIN_ADC2_CHANNEL;
|
||||
sConfig.Rank = ADC_REGULAR_RANK_2;
|
||||
HAL_ADC_ConfigChannel(&hadc2, &sConfig);
|
||||
|
||||
/**Configure Injected Channel
|
||||
*/
|
||||
sConfigInjected.InjectedChannel = TIP_TEMP_ADC2_CHANNEL;
|
||||
sConfigInjected.InjectedRank = ADC_INJECTED_RANK_1;
|
||||
sConfigInjected.InjectedNbrOfConversion = 4;
|
||||
sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_1CYCLE_5;
|
||||
sConfigInjected.ExternalTrigInjecConv = ADC_EXTERNALTRIGINJECCONV_T2_CC1;
|
||||
sConfigInjected.AutoInjectedConv = DISABLE;
|
||||
sConfigInjected.InjectedDiscontinuousConvMode = DISABLE;
|
||||
sConfigInjected.InjectedOffset = 0;
|
||||
HAL_ADCEx_InjectedConfigChannel(&hadc2, &sConfigInjected);
|
||||
sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_1CYCLE_5;
|
||||
|
||||
sConfigInjected.InjectedRank = ADC_INJECTED_RANK_2;
|
||||
HAL_ADCEx_InjectedConfigChannel(&hadc2, &sConfigInjected);
|
||||
sConfigInjected.InjectedRank = ADC_INJECTED_RANK_3;
|
||||
HAL_ADCEx_InjectedConfigChannel(&hadc2, &sConfigInjected);
|
||||
sConfigInjected.InjectedRank = ADC_INJECTED_RANK_4;
|
||||
HAL_ADCEx_InjectedConfigChannel(&hadc2, &sConfigInjected);
|
||||
|
||||
// Run ADC internal calibration
|
||||
while (HAL_ADCEx_Calibration_Start(&hadc2) != HAL_OK)
|
||||
;
|
||||
}
|
||||
/* I2C1 init function */
|
||||
static void MX_I2C1_Init(void) {
|
||||
hi2c1.Instance = I2C1;
|
||||
hi2c1.Init.ClockSpeed = 75000;
|
||||
// OLED doesnt handle >100k when its asleep (off).
|
||||
hi2c1.Init.DutyCycle = I2C_DUTYCYCLE_2;
|
||||
hi2c1.Init.OwnAddress1 = 0;
|
||||
hi2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
|
||||
hi2c1.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
|
||||
hi2c1.Init.OwnAddress2 = 0;
|
||||
hi2c1.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
|
||||
hi2c1.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
|
||||
HAL_I2C_Init(&hi2c1);
|
||||
}
|
||||
|
||||
/* IWDG init function */
|
||||
static void MX_IWDG_Init(void) {
|
||||
hiwdg.Instance = IWDG;
|
||||
hiwdg.Init.Prescaler = IWDG_PRESCALER_256;
|
||||
hiwdg.Init.Reload = 100;
|
||||
#ifndef SWD_ENABLE
|
||||
HAL_IWDG_Init(&hiwdg);
|
||||
#endif
|
||||
}
|
||||
|
||||
/* TIM3 init function */
|
||||
static void MX_TIM3_Init(void) {
|
||||
TIM_ClockConfigTypeDef sClockSourceConfig;
|
||||
TIM_MasterConfigTypeDef sMasterConfig;
|
||||
TIM_OC_InitTypeDef sConfigOC;
|
||||
|
||||
htim3.Instance = TIM3;
|
||||
htim3.Init.Prescaler = 8;
|
||||
htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||
htim3.Init.Period = 100; // 5 Khz PWM freq
|
||||
htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV4; // 4mhz before div
|
||||
htim3.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_ENABLE; // Preload the ARR register (though we dont use this)
|
||||
HAL_TIM_Base_Init(&htim3);
|
||||
|
||||
sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
|
||||
HAL_TIM_ConfigClockSource(&htim3, &sClockSourceConfig);
|
||||
|
||||
HAL_TIM_PWM_Init(&htim3);
|
||||
|
||||
HAL_TIM_OC_Init(&htim3);
|
||||
|
||||
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
|
||||
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
|
||||
HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig);
|
||||
|
||||
sConfigOC.OCMode = TIM_OCMODE_PWM1;
|
||||
sConfigOC.Pulse = 50; // 50% duty cycle, that is AC coupled through the cap
|
||||
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
|
||||
sConfigOC.OCFastMode = TIM_OCFAST_ENABLE;
|
||||
HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, PWM_Out_CHANNEL);
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
|
||||
/**TIM3 GPIO Configuration
|
||||
PWM_Out_Pin ------> TIM3_CH1
|
||||
*/
|
||||
GPIO_InitStruct.Pin = PWM_Out_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; // We would like sharp rising edges
|
||||
HAL_GPIO_Init(PWM_Out_GPIO_Port, &GPIO_InitStruct);
|
||||
#ifdef MODEL_TS100
|
||||
// Remap TIM3_CH1 to be on PB4
|
||||
__HAL_AFIO_REMAP_TIM3_PARTIAL();
|
||||
#else
|
||||
// No re-map required
|
||||
#endif
|
||||
HAL_TIM_PWM_Start(&htim3, PWM_Out_CHANNEL);
|
||||
}
|
||||
/* TIM3 init function */
|
||||
static void MX_TIM2_Init(void) {
|
||||
/*
|
||||
* We use the channel 1 to trigger the ADC at end of PWM period
|
||||
* And we use the channel 4 as the PWM modulation source using Interrupts
|
||||
* */
|
||||
TIM_ClockConfigTypeDef sClockSourceConfig;
|
||||
TIM_MasterConfigTypeDef sMasterConfig;
|
||||
TIM_OC_InitTypeDef sConfigOC;
|
||||
|
||||
// Timer 2 is fairly slow as its being used to run the PWM and trigger the ADC
|
||||
// in the PWM off time.
|
||||
htim2.Instance = TIM2;
|
||||
// dummy value, will be reconfigured by BSPInit()
|
||||
htim2.Init.Prescaler = 2000; // 2 MHz timer clock/2000 = 1 kHz tick rate
|
||||
|
||||
// pwm out is 10k from tim3, we want to run our PWM at around 10hz or slower on the output stage
|
||||
// These values give a rate of around 3.5 Hz for "fast" mode and 1.84 Hz for "slow"
|
||||
htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||
// dummy value, will be reconfigured by BSPInit()
|
||||
htim2.Init.Period = 255 + 17 * 2;
|
||||
htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV4; // 8 MHz (x2 APB1) before divide
|
||||
htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
||||
htim2.Init.RepetitionCounter = 0;
|
||||
HAL_TIM_Base_Init(&htim2);
|
||||
|
||||
sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
|
||||
HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig);
|
||||
|
||||
HAL_TIM_PWM_Init(&htim2);
|
||||
HAL_TIM_OC_Init(&htim2);
|
||||
|
||||
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
|
||||
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
|
||||
HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig);
|
||||
|
||||
sConfigOC.OCMode = TIM_OCMODE_PWM1;
|
||||
// dummy value, will be reconfigured by BSPInit() in the BSP.cpp
|
||||
sConfigOC.Pulse = 255 + 13 * 2; // 13 -> Delay of 7 ms
|
||||
// 255 is the largest time period of the drive signal, and then offset ADC sample to be a bit delayed after this
|
||||
/*
|
||||
* It takes 4 milliseconds for output to be stable after PWM turns off.
|
||||
* Assume ADC samples in 0.5ms
|
||||
* We need to set this to 100% + 4.5ms
|
||||
* */
|
||||
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
|
||||
sConfigOC.OCFastMode = TIM_OCFAST_ENABLE;
|
||||
HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_1);
|
||||
sConfigOC.Pulse = 0; // default to entirely off
|
||||
HAL_TIM_OC_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_4);
|
||||
|
||||
HAL_TIM_Base_Start_IT(&htim2);
|
||||
HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_1);
|
||||
HAL_TIM_PWM_Start_IT(&htim2, TIM_CHANNEL_4);
|
||||
HAL_NVIC_SetPriority(TIM2_IRQn, 15, 0);
|
||||
HAL_NVIC_EnableIRQ(TIM2_IRQn);
|
||||
}
|
||||
|
||||
/**
|
||||
* Enable DMA controller clock
|
||||
*/
|
||||
static void MX_DMA_Init(void) {
|
||||
/* DMA controller clock enable */
|
||||
__HAL_RCC_DMA1_CLK_ENABLE();
|
||||
|
||||
/* DMA interrupt init */
|
||||
/* DMA1_Channel1_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(DMA1_Channel1_IRQn, 5, 0);
|
||||
HAL_NVIC_EnableIRQ(DMA1_Channel1_IRQn);
|
||||
/* DMA1_Channel6_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(DMA1_Channel6_IRQn, 5, 0);
|
||||
HAL_NVIC_EnableIRQ(DMA1_Channel6_IRQn);
|
||||
/* DMA1_Channel7_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(DMA1_Channel7_IRQn, 5, 0);
|
||||
HAL_NVIC_EnableIRQ(DMA1_Channel7_IRQn);
|
||||
}
|
||||
|
||||
/** Configure pins as
|
||||
* Analog
|
||||
* Input
|
||||
* Output
|
||||
* EVENT_OUT
|
||||
* EXTI
|
||||
* Free pins are configured automatically as Analog
|
||||
PB0 ------> ADCx_IN8
|
||||
PB1 ------> ADCx_IN9
|
||||
*/
|
||||
static void MX_GPIO_Init(void) {
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(OLED_RESET_GPIO_Port, OLED_RESET_Pin, GPIO_PIN_RESET);
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
/*Configure GPIO pins : PD0 PD1 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
||||
/*Configure peripheral I/O remapping */
|
||||
__HAL_AFIO_REMAP_PD01_ENABLE();
|
||||
//^ remap XTAL so that pins can be analog (all input buffers off).
|
||||
// reduces power consumption
|
||||
|
||||
/*
|
||||
* Configure All pins as analog by default
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7 | GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_15;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 |
|
||||
#ifdef MODEL_TS100
|
||||
GPIO_PIN_3 |
|
||||
#endif
|
||||
GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7 | GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13 | GPIO_PIN_14 | GPIO_PIN_15;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
#ifdef MODEL_TS100
|
||||
#ifndef SWD_ENABLE
|
||||
/* Pull USB and SWD lines low to prevent enumeration attempts and EMI affecting
|
||||
* the debug core */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13 | GPIO_PIN_14;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_11, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_12, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_13, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_14, GPIO_PIN_RESET);
|
||||
#else
|
||||
/* Make all lines affecting SWD floating to allow debugging */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_14 | GPIO_PIN_13;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
#endif
|
||||
#else
|
||||
/* TS80 */
|
||||
/* Leave USB lines open circuit*/
|
||||
|
||||
#endif
|
||||
|
||||
/*Configure GPIO pins : KEY_B_Pin KEY_A_Pin */
|
||||
GPIO_InitStruct.Pin = KEY_B_Pin | KEY_A_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
HAL_GPIO_Init(KEY_B_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : OLED_RESET_Pin */
|
||||
GPIO_InitStruct.Pin = OLED_RESET_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(OLED_RESET_GPIO_Port, &GPIO_InitStruct);
|
||||
HAL_GPIO_WritePin(OLED_RESET_GPIO_Port, OLED_RESET_Pin, GPIO_PIN_RESET);
|
||||
|
||||
// Pull down LCD reset
|
||||
HAL_GPIO_WritePin(OLED_RESET_GPIO_Port, OLED_RESET_Pin, GPIO_PIN_RESET);
|
||||
HAL_Delay(30);
|
||||
HAL_GPIO_WritePin(OLED_RESET_GPIO_Port, OLED_RESET_Pin, GPIO_PIN_SET);
|
||||
}
|
||||
#ifdef USE_FULL_ASSERT
|
||||
void assert_failed(uint8_t *file, uint32_t line) { asm("bkpt"); }
|
||||
#endif
|
||||
Reference in New Issue
Block a user